2ARVJ-PL26JoneR Translator 5.0

This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types: JoneR Translator 5.0 (FCC ID: 2ARVJ-PL26) has also been tested against this SAR limit. SAR information can be viewed online at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 0mm to body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user's bodies mentioned above, use accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.

Page: 1/11 SHENZHEN STS TEST SERVICES CO., LTD. 1/F, BUILDING 2, ZHUOKE SCIENCE PARK, 190 CHONGQING ROAD FUYONG, BAO’ AN DISTRICT, SHENZHEN,CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: SN 08/21 EPGO352 Calibrated at MVG Z.I. de la pointe du diable Technopôle Brest Iroise – 295 avenue Alexis de Rochon 29280 PLOUZANE - FRANCE Calibration date: 09/15/2025 Accreditations #2-6789 Scope available on www.cofrac.fr The use of the Cofrac brand and the accreditation references is prohibited from any reproduction. Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E-Field Probe calibration performed at MVG, using the CALIPROBE test bench, for use with a MVG COMO SAR system only. The test results covered by accreditation are traceable to the International System of Units (SI). COMOSAR E-Field Probe Calibration Report Ref : ACR.95.19.25.BES.A Docusign Envelope ID: 711C3E09-7054-43A0-BF16-C536091746C4 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.95.19.25.BES.A Page: 2/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function Date Signature Prepared by : Pedro Ruiz Measurement Responsible 9/16/2025 Checked & approved by: Jérôme Luc Technical Manager 9/16/2025 Authorized by: Laboratory Director Customer Name Distribution : Shenzhen STS Test Services Co., Ltd. Issue Name Date Modifications A Pedro Ruiz 9/16/2025 Initial release Docusign Envelope ID: 711C3E09-7054-43A0-BF16-C536091746C4 Geraldine Toutain 9/16/2025 COMOSAR E-FIELD PROBE CALIBRATION REPORT Page: 3/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Sensitivity _______________________________________________________________ 4 3.2 Linearity ________________________________________________________________ 5 3.3 Isotropy _________________________________________________________________ 5 3.4 Boundary Effect __________________________________________________________ 5 3.5 Probe Modulation Response _________________________________________________ 6 4 Measurement Uncertainty .......................................................................................... 6 5 Calibration Results ..................................................................................................... 6 5.1 Calibration in air __________________________________________________________ 6 5.2 Calibration in liquid _______________________________________________________ 7 6 Verification Results ................................................................................................... 8 7 List of Equipment ...................................................................................................... 9 Docusign Envelope ID: 711C3E09-7054-43A0-BF16-C536091746C4 Ref: ACR.95.19.25.BES.A COMOSAR E-FIELD PROBE CALIBRATION REPORT Page: 4/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number SN 08/21 EPGO352 Product Condition (new / used) Used Frequency Range of Probe 0.15 GHz-7.5GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.222 M: Dipole 2: R2=0.198 M: Dipole 3: R3=0.191 M: 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards. Figure 1 – MVG COMOSAR Dosimetric E field Probe Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their effect. All calibrations / measurements performed meet the fore-mentioned standards. 3.1 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards for frequency range 600- 7500MHz and using the calorimeter cell method (transfer method) as outlined in the standards for frequency 150-450 MHz. Docusign Envelope ID: 711C3E09-7054-43A0-BF16-C536091746C4 Ref: ACR.95.19.25.BES.A COMOSAR E-FIELD PROBE CALIBRATION REPORT Page: 5/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 3.2 LINEARITY The evaluation of the linearity was done in fre…

Text truncated - open the document above for the full version.

ReportNo.:AB26030044 Page1of5 AppendixATestPhotos ACPowerLineConductedEmissionsTestView ReportNo.:AB26030044 Page2of5 RadiatedSpuriousEmissionTestView1 ReportNo.:AB26030044 Page3of5 RadiatedSpuriousEmissionTestView ReportNo.:AB26030044 Page4of5 RFTestView-BT/WIFI ReportNo.:AB26030044 Page5of5 RFTestView-LTE

SAR Setup photos for FCC ID: Front side(separation distance is 0mm) Back Side (separation distance is 0mm) Left side(separation distance is 0mm) Right Side (separation distance is 0mm) Top side(separation distance is 0mm) Bottom Side (separation distance is 0mm)

ShenzhenQianmuCommunicationTechnologyCo.,Ltd. AntennaAdmissionCertificate Applicable Model PL26 Client SpecificationDescription Product Content Specifications Customer MaterialCode Specification Description 4GantennaFPC/Black/BBZN-F4-PL26-4GMAIN-V1.2 diversityantennaFPC/Black/DIV+3rdGenerationTerminal0.81*30mm WiFiantenna FPC/Black/BBZN-F4-PL26-WIFI/GPS/BT-V1.2 +Three-generationterminal0.81*62mm Changeresume Order Number DateEdition ChangeContent Summary 1 2026-01-15V1.0NewProject 2 3 Suppliersampleconfirmation ResearchAnd Development StructureExamineAndVerifyJudge PASS FAIL Customersampleconfirmation ElectronStructureProjectPurchaseCharacter ExamineAnd Verify Reasonforrejectionorothernotes: 1.ElectricalPerformanceTestReportofMainAntenna 1.1TestItemsandEquipment testitemequipment passivetest ① .VSWRparameter ② .Returnlossparameter Networkanalyzer:HP8753D 3DDarkroomAntennaTestSystem(ETSTest System,NetworkAnalyzer,IntegratedTestSystem) activetest ①。 transmittingpower ②。 incominglevel ③。 receivingsensitivity Comprehensivetester:AgilentE5515C 3DDarkroomAntennaTestSystem(ETSTest System,IntegratedTestInstrument) 1.2GSMPassiveTestReport VSWRparametervalues frequency （ MHZ ） 79496017101880217025002690 RL2.73.21.81.83.11.71.3 Returnlossparametervalue frequency （ MHZ ） 79496017101880217025002690 RL-6.5-5.5-10.2-10.4-5.7-11-16.3 2、activetestdata B1B3 Channel180501830018550192501957519900 TRP18.6418.5718.9918.6918.4718.82 TIS-90.02-91.43 B5B7 Channel204502052520600208002110021400 TRP18.2318.518.3818.6418.8817.39 TIS-90.34-87.6 B8B19 Channel215002162521750240502407524100 TRP17.7217.4316.618.6618.6218.78 TIS-86.23-90.03 B20 Channel242002430024400 TRP18.1718.4217.6 TIS-91.41 B28B28B Channel2730027370274302751027610 TRP18.8818.7818.5718.918.73 TIS-90.65-90.62 B38B40 Channel378003800038200387003915038600 TRP18.5918.2617.5718.2618.2618.98 TIS-87.33-90.4 B41 Channel403404074041140 TRP18.8318.8517.9 TIS-86.27 WiFi2400-2500MHz802.11b11MBps Channel1611 TRP12.1611.5411.58 TIS-81.01 WiFi5000-5800MHz802.11a54MBps Channel36161165 TRP10.8211.1111.5 TIS-72.05 3.AntennaGainandEfficiency mainantennafrequencyband yieldvalue （ dBi ） B11920~2170MHz0.38 B31710~1880MHZ0.36 B5824~894MHZ-0.15 B72500~2690MHZ0.35 B8880~960MHZ-0.17 B19830~890MHZ-0.17 B20832~862MHZ-0.18 B28A/B703~803MHZ-0.15 B382570~2620MHZ0.33 B402300MHz~2400MHz0.35 B412496MHz~2690MHz0.34 small antennafrequency band yield value （ dBi） wifi/BT2400-2500MHZ0.77 GPS1575MHZ0.82 4. Measured GPS Antenna Rooftesting wifi 5745-5825MHZ0.3 5.EnvironmentalTreatmentInstructions Antennaexposedcopper areaandscreengrounding Larrierground Mainboardandscreen grounding keysteelsheetgrounding Protectiveplatewithconductive clothshielding. shieldingcoverwithconductivecloth GPSatthislocation Diversityantennaatthisposition 6.Engineeringdrawings

ReportNo.:AB26030044FW04 AiboStandardTechnology(Shenzhen)Co.,Ltd. 101,BuildingB,TuoriNewEnergyIndustrialPark,High-techPark,TianliaoCommunity,YutangStreet, GuangmingDistrict,ShenzhenCity,GuangdongProvince,China Tel.:+8675585250797E-mail:[email protected]:www.aibonorm.com FCCTESTREPORT ReportNo..............................................: AB26030044FW04 FCCID ................................................... : 2ARVJ-PL26 Applicant ................................................ : BeijingBabelTechnologyCo.,Ltd. Address ................................................. : 4thFloor,Room409,BlockCI-M-WAY,45ChengfuRd.,Haidian District,Beijing,China Manufacturer......................................: BeijingBabelTechnologyCo.,Ltd. Address..............................................: 4thFloor,Room409,BlockCI-M-WAY,45ChengfuRd.,Haidian District,Beijing,China ProductName.......................................:JoneRTranslator5.0 TradeMark ............................................ : JoneR TestModel ............................................. : PL26 AdditionalModel(s) .............................. : / Standard................................................:FCC47CFRPart15SubpartE(Part15.407) IEEE/ANSI/USEMCSCC63.10-2020 DateofReceipt....................................:2026.03.04 DateofTestDate ................................. : 2026.03.05-2026.04.01 DateofIssue........................................:2026.04.02 TestResult............................................:Pass Compiledby: (PrintedName+Signature) HuaijieLi Supervisedby: (PrintedName+Signature) DavidHuang Approvedby: (PrintedName+Signature) JayLiu TestingLaboratoryName...................:AiboStandardTechnology(Shenzhen)Co.,Ltd. Address.................................................: 101,BuildingB,TuoriNewEnergyIndustrialPark,High-techPark, TianliaoCommunity,YutangStreet,GuangmingDistrict,Shenzhen City,GuangdongProvince,China Thistestreportmaybeduplicatedcompletelyforlegalusewiththeapprovaloftheapplicant.Itshouldnot bereproducedexceptinfull,withoutthewrittenapprovalofourlaboratory.Theclientshouldnotuseitto claimproductendorsementbyAibo.Thetestresultsinthereportonlyapplytothetestedsample.Thetest reportshallbeinvalidwithoutallthesignaturesoftestingengineers,reviewerandapprover.Anyobjections mustberaisedtoAibowithin15dayssincethedatewhenthereportisreceived.Itwillnotbetakeninto considerationbeyondthislimit.Thetestreportmerelycorrespondtothetestsample. ReportNo.:AB26030044FW04 Page2of43 AiboStandardTechnology(Shenzhen)Co.,Ltd. FCCTESTREPORT TestResultPositive Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetestlaboratory. EUT......................................... : JoneRTranslator5.0 TestModel.............................. : PL26 Applicant...............................:BeijingBabelTechnologyCo.,Ltd. Address...................................:4thFloor,Room409,BlockCI-M-WAY,45ChengfuRd.,Haidian District,Beijing,China Manufacturer......................... : BeijingBabelTechnologyCo.,Ltd. Address...................................: 4thFloor,Room409,BlockCI-M-WAY,45ChengfuRd.,Haidian District,Beijing,China ReportNo.:AB26030044FW04 Page3of43 AiboStandardTechnology(Shenzhen)Co.,Ltd. REPORTVERSION VersionNo.IssueDateDescription 012026.04.02InitialIssue ReportNo.:AB26030044FW04 Page4of43 AiboStandardTechnology(Shenzhen)Co.,Ltd. TABLEOFCONTENTS 1.GENERALINFORMATION.........................................................................................................................................6 1.1.GENERALDESCRIPTIONOFEUT.....................................................................................................................................6 1.2.DESCRIPTIONOFSUPPORTEQUIPMENT........................................................................................................................7 1.3.DESCRIPTIONOFEXTERNALI/O.....................................................................................................................................7 1.4.GENERALDESCRIPTIONOFAPPLIEDSTANDARDS.........................................................................................................8 1.5.DESCRIPTIONOFTESTFACILITY.....................................................................................................................................8 1.6.MEASUREMENTUNCERTAINTY......................................................................................................................................9 1.7.ENVIRONMENTALCONDITIONS.....................................................................................................................................9 1.8.DESCRIPTIONOFTESTMODES.....................................................................................................................................10 2.SUMMARYOFTESTRESULT................................................................................................................................12 3.MEASUREMENTINSTRUMENTSLIST.................................................................................................................13 4.ANTENNAREQUIREMENT ......................................................................................................................................14 5.DUTYCYCLE.............................................................................................................................................................15 5.1.LIMIT.............................................................................................................................................................................15 5.2.TESTSETUP...................................................................................................................................................................15 5.3.TESTPROCEDURE.......................................................................................................................…

Text truncated - open the document above for the full version.

ReportNo.:AB26030044FW04 1 / 23 AppendixG_5.8GWIFI DutyCycle ConditionModeFrequency(MHz)AntennaDutyCycle(%)CorrectionFactor(dB)1/T(kHz) NVNTa5745Ant197.850.090.48 NVNTa5785Ant197.710.10.48 NVNTa5825Ant197.80.10.48 ReportNo.:AB26030044FW04 2 / 23 TestGraphs DutyCycleNVNTa5745MHzAnt1 DutyCycleNVNTa5785MHzAnt1 ReportNo.:AB26030044FW04 3 / 23 DutyCycleNVNTa5825MHzAnt1 ReportNo.:AB26030044FW04 4 / 23 MaximumConductedOutputPower ConditionModeFrequency(MHz)AntennaConductedPower(dBm)DutyFactor(dB)TotalPower(dBm)Limit(dBm)Verdict NVNTa5745Ant113.770.0913.8630Pass NVNTa5785Ant112.750.112.8530Pass NVNTa5825Ant112.610.112.7130Pass ReportNo.:AB26030044FW04 5 / 23 TestGraphs PowerNVNTa5745MHzAnt1 PowerNVNTa5785MHzAnt1 ReportNo.:AB26030044FW04 6 / 23 PowerNVNTa5825MHzAnt1 ReportNo.:AB26030044FW04 7 / 23 -6dBBandwidth ConditionModeFrequency(MHz)Antenna-6dBBandwidth(MHz)Limit-6dBBandwidth(MHz)Verdict NVNTa5745Ant115.410.5Pass NVNTa5785Ant113.860.5Pass NVNTa5825Ant113.80.5Pass ReportNo.:AB26030044FW04 8 / 23 TestGraphs -6dBBandwidthNVNTa5745MHzAnt1 -6dBBandwidthNVNTa5785MHzAnt1 ReportNo.:AB26030044FW04 9 / 23 -6dBBandwidthNVNTa5825MHzAnt1 ReportNo.:AB26030044FW04 10 / 23 OccupiedChannelBandwidth ConditionModeFrequency(MHz)Antenna99%OBW(MHz) NVNTa5745Ant116.576 NVNTa5785Ant116.652 NVNTa5825Ant116.612 ReportNo.:AB26030044FW04 11 / 23 TestGraphs OBWNVNTa5745MHzAnt1 OBWNVNTa5785MHzAnt1 ReportNo.:AB26030044FW04 12 / 23 OBWNVNTa5825MHzAnt1 ReportNo.:AB26030044FW04 13 / 23 MaximumPowerSpectralDensityLevel ConditionModeFrequency (MHz) AntennaConductedPSD (dBm/510kHz) DutyFactor (dB) TotalPSD (dBm/510kHz) Limit (dBm/500kHz) Verdict NVNTa5745Ant11.250.091.3430Pass NVNTa5785Ant10.070.10.1730Pass NVNTa5825Ant1-0.050.10.0530Pass ReportNo.:AB26030044FW04 14 / 23 TestGraphs PSDNVNTa5745MHzAnt1 PSDNVNTa5785MHzAnt1 ReportNo.:AB26030044FW04 15 / 23 PSDNVNTa5825MHzAnt1 ReportNo.:AB26030044FW04 16 / 23 BandEdge ConditionModeFrequency(MHz)AntennaMaxValue(dBm)Verdict NVNTa5745Ant1-43.71Pass NVNTa5825Ant1-45.99Pass ReportNo.:AB26030044FW04 17 / 23 TestGraphs BandEdgeNVNTa5745MHzLowAnt1 BandEdgeNVNTa5825MHzHighAnt1 ReportNo.:AB26030044FW04 18 / 23 FrequencyStability ConditionModeTime (mins) Frequency (MHz) AntennaMeasuredFrequency (MHz) FrequencyError (Hz) Deviation (ppm) Limit (ppm) Verdict NVNTa05745Ant157450025Pass NVNTa05785Ant157850025Pass NVNTa05825Ant15824.98-20000-3.4325Pass ReportNo.:AB26030044FW04 19 / 23 TestGraphs Freq.StabilityNVNTa5745MHzAnt10Minutes Freq.StabilityNVNTa5785MHzAnt10Minutes ReportNo.:AB26030044FW04 20 / 23 Freq.StabilityNVNTa5825MHzAnt10Minutes ReportNo.:AB26030044FW04 21 / 23 ConductedRFSpuriousEmission ConditionModeFrequency(MHz)AntennaMaxValue(dBm)Limit(dBm)Verdict NVNTa5745Ant1-35.78-27Pass NVNTa5785Ant1-36.5-27Pass NVNTa5825Ant1-36.68-27Pass ReportNo.:AB26030044FW04 22 / 23 TestGraphs Tx.SpuriousNVNTa5745MHzAnt1Emission Tx.SpuriousNVNTa5785MHzAnt1Emission ReportNo.:AB26030044FW04 23 / 23 Tx.SpuriousNVNTa5825MHzAnt1Emission

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. SAR Test Report Report No.: STS2604334H01 Issued for Beijing Babel Technology Co., Ltd. 4th Floor.Room 409.Block C I-M-WAY.45Cheng fu Rd., Haidian District,Beijing.China Product Name: JoneR Translator 5.0 Brand Name: JoneR Model Name: PL26 Series Model(s): N/A FCC ID: Test Standard: Max. Report SAR ANSI/IEEE Std. C95.1 FCC 47 CFR Part 2 (2.1093) IEEE Std. 1528-2013 Body: 0.795 W/kg(1g) 2ARVJ-PL26 Page 2 of 59 Report No.: STS2604334H01 TEST REPORT CERTIFICATION Applicant’s name ................. : Beijing Babel Technology Co., Ltd. Address ................................. : 4th Floor.Room 409.Block C I-M-WAY.45Cheng fu Rd., Haidian District,Beijing.China Manufacturer's Name .......... : Beijing Babel Technology Co., Ltd. Address ................................. : 4th Floor.Room 409.Block C I-M-WAY.45Cheng fu Rd., Haidian District,Beijing.China Product description Product name ........................ : JoneR Translator 5.0 Brand name ......................... : JoneR Model name ......................... : PL26 Series Model(s) : ..................... N/A Standards ............................. : ANSI/IEEE Std. C95.1 FCC 47 CFR Part 2 (2.1093) IEEE Std. 1528-2013 The device was tested by Shenzhen STS Test Services Co., Ltd. in accordance with the measurement methods and procedures specified in KDB 865664 The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Date of Test ............................................ : Date (s) of performance of tests ............. : 09 Apr. 2026~10 Apr. 2026 Date of Issue ........................................... : 20 Apr. 2026 Test Result ............................................... : Pass Testing Engineer : (Xin.Liu) Technical Manager : (Shifan. Long) Authorized Signatory : (Bovey Yang) Page 3 of 59 Report No.: STS2604334H01 Table of Contents 1. General Information 5 1.1 EUT Description 5 1.2 Test Environment 6 1.3 Test Factory 6 2. Test Standards and Limits 7 3. SAR Measurement System 8 3.1 Definition of Specific Absorption Rate (SAR) 8 3.2 SAR System 8 4. Tissue Simulating Liquids 11 4.1 Simulating Liquids Parameter Check 11 5. SAR System Validation 14 5.1 Validation System 14 5.2 Validation Result 15 6. SAR Evaluation Procedures 16 7. EUT Test Position 17 7.1 Body-worn Position Conditions 17 9. Uncertainty 18 9.1 Measurement Uncertainty 18 10. Conducted Power Measurement 21 10.1 Test Result 21 11. EUT and Test Setup Photo 29 11.1 EUT Photo 29 11.2 Setup Photo 32 12. SAR Result Summary 36 12.1 Body SAR 36 12.2 Simultaneous Multi-band Transmission Evaluation 37 13. Equipment List 38 Appendix A. System Validation Plots 39 Appendix B. SAR Test Plots 47 Appendix C. Probe Calibration and Dipole Calibration Report 59 Revision History Page 4 of 59 Report No.: STS2604334H01 Rev. Issue Date Report No. Effect Page Contents 00 20 Apr. 2026 STS2604334H01 ALL Initial Issue Page 5 of 59 Report No.: STS2604334H01 1. General Information Environmental evaluation measurements of specific absorption rate (SAR) distributions in emulated human head and body tissues exposed to radio frequency (RF) radiation from wireless portable devices for compliance with the rules and regulations of the U.S. Federal Communications Commission (FCC). 1.1 EUT Description Product Name JoneR Translator 5.0 Brand Name JoneR Model Name PL26 Series Model N/A Model Difference N/A Sample number 260403004-1 Battery N/A Device Category Portable Product stage Production unit RF Exposure Environment General Population / Uncontrolled Hardware Version BBZN_F4_MB_V1.1 Software Version Android 8.1 Frequency Range LTE Band 5: 824 MHz ~ 849 MHz LTE Band 7:2500 MHz ~ 2570 MHz LTE Band 38: 2570 MHz ~ 2620 MHz WLAN802.11b: 2412 MHz ~ 2462 MHz WLAN 802.11a: 5745 ~ 5825 MHz Bluetooth: 2402 MHz to 2480 MHz Max. Reported SAR(1g): (Limit:1.6&4.0W/kg) Test distance: Body:0mm Band Mode Body Worn (W/kg) PCE LTE Band 5 0.693 PCE LTE Band 7 0.795 PCE LTE Band 38 0.673 DTS 2.4G WLAN 0.510 DSS BLE 0.084 NII 5.2G WLAN 0.334 1-g Sum SAR 1.305 Page 6 of 59 Report No.: STS2604334H01 FCC Equipment Class Licensed Portable Transmitter Held to Ear (PCE) Part 15 Spread Spectrum Transmitter (DSS) Digital Transmission System (DTS) Unlicensed National Information Infrastructure TX(NII) Operating Mode: LTE: QPSK, 16QAM 2.4G WLAN : 802.11b(DSSS):CCK,DQPSK,DBPSK 802.11g(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM):BPSK,QPSK,16-QAM,64-QAM 5G WLAN: 802.11a(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11ac(OFDM):BPSK,QPSK,16-QAM,64-QAM,256-QAM Bluetooth: GFSK +π/4DQPSK+8DPSK BLE: GFSK Antenna Specification: WCDMA/LTE: PIFA Antenna WLAN/BLE: PIFA Antenna Hotspot Mode Not Support DTM Mode Not Support Note: 1. The EUT battery must be fully charged and checked periodically during the test to ascertain uniform power 1.2 Test Environment Ambient conditions in the SAR laboratory: Items Required Temperature (°C) 18-25 Humidity (%RH) 30-70 1.3 Test Factory ShenZhen STS Test Services Co.,Ltd. 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub- District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration No.: 625569 IC Registration No.: 12108A A2LA Certificate No.: 4338.01 Page 7 of 59 Report No.: STS2604334H01 2. Test Standards and Limits No. Identity Document Title 1 47 CFR Part 2 Frequency Allocations and Radio Treaty Matters; General Rules and Regulations 2 IEEE Std C95.1, 2019 IEEE Standard for Safety Levels with Respect to Human Exposure to Electric,Magnetic, and Electromagnetic Fields,0 Hz to 300 GHz. It specifies the maximum exposure limit of 1.6 W/kg as averaged over any 1 gram of ti…

Text truncated - open the document above for the full version.

Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, All Test Data Presented in this report is only applicable to presented Test sample. ShenZhen STS Test Services Co.,Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] S T L A B S SAR Dipole Performance Measurement Report EUT Type： SAR Validation Dipole and Waveguide Model Name： DIP0G835, DIP2G450, DIP2G600, WGA32 Brand Name: SATIMO Test Conclusion： Pass Test Date： 01 Jul . 2024 & 02 Jul. 2025 Date of Issue： 02 Jul. 2025 Testing Engineer : (Xin.Liu) Technical Manager : (Shifan. Long) Authorized Signatory : (Bovey Yang) ISSUED BY Shenzhen STS Test Services Co., Ltd. Kind of Equipment Manufacturer Type No. Serial No. Last Calibration Calibrated Until PC Acer N/A N/A N/A N/A E-Field Probe MVG SSE2 SN 08/21 EPGO352 2024.09.18 2025.09.17 Dielectric Probe Kit MVG SCLMP SN 32/14 OCPG67 2024.09.18 2025.09.17 Phantom1 MVG SAM SN 32/14 SAM115 N/A N/A Phantom2 MVG SAM SN 32/14 SAM116 N/A N/A Attenuator Agilent 99899 DC-18GHz N/A N/A Directional coupler Narda 4226-20 3305 N/A N/A Network Analyzer Agilent E5071C MY46520378 2024-09-25 2025-09-26 Multi Meter Keithley Multi Meter 2000 4050073 2024-09-25 2025-09-26 Signal Generator Agilent N5182A MY50140530 2024-09-25 2025-09-26 Power Amplifier DESAY ZHL-42W 9638 2024-09-25 2025-09-26 Power Meter R&S NRP 100510 2024-09-25 2025-09-26 Power Sensor R&S NRP-Z11 101919 2024-09-25 2025-09-26 Power Sensor Keysight U2021XA MY56280002 2024-09-25 2025-09-26 Temperature hygrometer SuWei SW-108 N/A 2024.10.15 2025.10.14 Thermograph Elitech RC-4 S/N EF7176501537 2024.10.15 2025.10.14 ISSUED BY Shenzhen STS Test Services Co., Ltd. Kind of Equipment Manufacturer Type No. Serial No. Last Calibration Calibrated Until SAR Test System SATIMO N/A V5.3.15.11 N/A N/A Dielectric Probe Kit MVG SCLMP SN 32/14 OCPG67 2025.09.15 2026.09.14 Antenna MVG ANTA3 SN 07/13 ZNTA52 N/A N/A Phantom1 MVG SAM SN 32/14 SAM115 N/A N/A Phantom3 MVG SAM SN 21/21 ELLI48 N/A N/A Phone holder MVG N/A SN 32/14 MSH97 N/A N/A Laptop holder MVG N/A SN 32/14 LSH29 N/A N/A Attenuator Agilent HXT-10-8-SMA 240327017 2025-02-22 2026-02-21 Directional coupler Xi'an Xingbo XBOH-OA08-20dB 211123-4-3 2025-02-22 2026-02-21 Network Analyzer Agilent E5071C MY46520378 2025-09-26 2026-09-24 Multi Meter Keithley Multi Meter 2000 4050073 2025-09-22 2026-09-21 Signal Generator Agilent N5182A MY50140530 2025-09-26 2026-09-25 Wireless Communication Test Set Agilent 8960-E5515C MY48360751 2025-02-22 2026-02-21 Wireless Communication Test Set R&S CMW500 156324 2025-09-25 2026-09-24 Power Amplifier DESAY…

Text truncated - open the document above for the full version.