2ARXB-K4ASmart Label Printer

2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Wuhan Jingchen Intelligent Identification Technology Co., Ltd. Address: No. 5, Creative Workshop, Creative World, Yezhihu West Road, Hongshan District, Wuhan, China FCC ID: 2ARXB-K4A Date: Jul. 07, 2026 2.911(d)(7) USA Designated Agent for Service of Process We, [Wuhan Jingchen Intelligent Identification Technology Co., Ltd.] (“the applicant”) designate [Wedo Group] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Wedo Group Address: 710 Arabian Ln Walnut, CA 91789, United States FRN：0037730611 Contact Name: Jeffrey Chen Telephone No: (323) 528-1888 Email: [email protected] Applicant Company name: Wuhan Jingchen Intelligent Identification Technology Co., Ltd. Address: No. 5, Creative Workshop, Creative World, Yezhihu West Road, Hongshan District, Wuhan, China FRN: 0028040269 Contact Name: Shenghua Hu Telephone No: +86-15827606851 Email: [email protected] Signature: Signature:

WuhanJingchenIntelligentIdentificationTechnologyCo., Ltd. No.5,CreativeWorkshop,CreativeWorld,YezhihuWestRoad,HongshanDistrict,Wuhan,China AttestationStatements NotCoveredEntityApplicant&NotCoveredEquipment To:FederalCommunicationsCommissionDate:Jul.07,2026 7435OaklandMillsRoad, Columbia,MD21046,USA Ref:InformationRequiredbySection2.911(d)(5)(i)&(ii) FCCID:2ARXB-K4A WuhanJingchenIntelligentIdentificationTechnologyCo.,Ltd.(“theapplicant”)certifiesthat,asofthe dateofthefilingoftheapplication,theapplicantisnotidentifiedontheCoveredList,established pursuantto§1.50002ofreferencechapter,asanentityproducing“covered”communicationequipment. Theequipmentforwhichauthorizationissoughtisnot“covered”telecommunicationsequipmentand videosurveillanceequipmentproducedbyentitiesidentifiedontheCommission’sCoveredListthat prohibitedfromreceivinganequipmentauthorizationpursuanttosection§2.903oftheFCCrules. Sincerelyyours, ApplicantSignature PrintedName:ShenghuaHu Title:Manager Address:No.5,CreativeWorkshop,CreativeWorld,YezhihuWestRoad,HongshanDistrict,Wuhan,China Tel.:+86-15827606851 Email:[email protected]

Wuhan Jingchen Intelligent Identification Technology Co., Ltd. Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A Device Smart Label Printer Company name Wuhan Jingchen Intelligent Identification Technology Co., Ltd. Grantee code 2ARXB FCC ID 2ARXB-K4A FRN 0028040269 Contact name Shenghua Hu Address No. 5, Creative Workshop, Creative World, Yezhihu West Road, Hongshan District, Wuhan, China Telephone number +86-15827606851 E-mail [email protected] Chipset/module information AT32F490RCT7 & BR8051A01 & FM17601 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 3 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: 4 # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Shenghua Hu Date: Jul. 07, 2026 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

TCB CALL página 1 File FCC ID: 2ARXB-K4A Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://bizfileonline.sos.ca.gov/search/business TCB CALL página 2 TCB CALL página 3 TCB CALL página 4 In google maps: TCB CALL página 5 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

WuhanJingchenIntelligentIdentificationTechnologyCo.,Ltd. No.5,CreativeWorkshop,CreativeWorld,YezhihuWestRoad,HongshanDistrict,Wuhan,China OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:Jul.07,2026 Subject;RequestforConfidentiality FCCID:2ARXB-K4A ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram OperationalDescription PartsList Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:ShenghuaHu Title:Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Wuhan Jingchen Intelligent Identification Technology Co., Ltd. Address: No. 5, Creative Workshop, Creative World, Yezhihu West Road, Hongshan District, Wuhan, China Product Name: Smart Label Printer Model Number: NIIMBOT K4 FCC Identifier: 2ARXB-K4A We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Shenghua Hu Date: Jul. 07, 2026 Title: Manager Signature of applicant:

1.5mm 1.5mm 51*27mm R2 CMYK:0/0/0/100CMYK:0/0/0/0 Wuhan Jingchen Intelligent ldentification Technology Co., Ltd. Smart Label Printer FCC ID : 2ARXB-K4A Model : NIIMBOT K4 Input : 24V 2.5A R 220-J11843 R-R-WUj-XX IC:28978-K4AANATEL : XXXXX-XX-XXXXX Made in China →

Page 1 of 10 RF Exposure Report Report No.: AGC07434260507FH01 FCC ID : 2ARXB-K4A APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Smart Label Printer BRAND NAME : NIIMBOT MODEL NAME : NIIMBOT K4 APPLICANT : Wuhan Jingchen Intelligent Identification Technology Co., Ltd. DATE OF ISSUE : Jul. 07, 2026 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC07434260507FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 07, 2026 Valid Initial Release Report No.: AGC07434260507FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Mobile Device Evaluation Method and Limit ................................................................................................ 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC07434260507FH01 Page 4 of 10 1. General Information Applicant Wuhan Jingchen Intelligent Identification Technology Co., Ltd. Address No. 5, Creative Workshop, Creative World, Yezhihu West Road, Hongshan District, Wuhan, China Manufacturer Wuhan Jingchen Intelligent Identification Technology Co., Ltd. Address No. 5, Creative Workshop, Creative World, Yezhihu West Road, Hongshan District, Wuhan, China Factory Dongxihu branch of Wuhan Jingchen Intelligent Identification Technology Co., Ltd. Address No. 20, Xincheng eighteen Road, Changqing Street, Dongxihu District, Wuhan, Hubei Province, China Product Designation Smart Label Printer Brand Name NIIMBOT Test Model NIIMBOT K4 Series Model(s) N/A Difference Description N/A Date of receipt of test item Jun. 03, 2026 Date of Test Jun. 03, 2026 to Jul. 07, 2026 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Cool Cheng (Project Engineer) Jul. 07, 2026 Reviewed By Bibo Zhang (Reviewer) Jul. 07, 2026 Approved By Angela Li (Authorized Officer) Jul. 07, 2026 Report No.: AGC07434260507FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) BT: 2402MHz-2480MHz RFID: 13.56MHz Hardware Version 65K4ME Software Version V1.1.1 Modulation Type BT: BR GFSK, EDR π /4-DQPSK, 8DPSK BLE GFSK 1Mbps GFSK 2Mbps RFID: ASK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation BT: PCB Antenna RFID: Integral Antenna Antenna Gain BT:-1.028dBi RFID: 0dBi Minimum Assessment Distance 20cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC07434260507FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 101 & 201, Building 19(B5), Junfeng Industrial Park, Chongqing Road, P.R.C. 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC07434260507FH01 Page 7 of 10 3.3 Environmental Conditions Normal Conditions Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure range (kPa) 86 - 106 Power supply DC 24V by ad…

Text truncated - open the document above for the full version.

Page 1 of 65 FCCTestReport ReportNo.:AGC07434260507FR01 FCCID:2ARXB-K4A APPLICATIONPURPOSE:OriginalEquipment PRODUCTDESIGNATION:SmartLabelPrinter BRANDNAME:NIIMBOT MODELNAME:NIIMBOTK4 APPLICANT: WuhanJingchenIntelligentIdentificationTechnologyCo., Ltd. DATEOFISSUE:Jul.07,2026 STANDARD(S):FCCPart15SubpartC§15.247 REPORTVERSION:V1.0 AttestationofGlobalCompliance(Shenzhen)Co.,Ltd ReportNo.:AGC07434260507FR01 Page2of65 ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/Jul.07,2026ValidInitialRelease ReportNo.:AGC07434260507FR01 Page3of65 TableofContents 1.GeneralInformation..........................................................................................................................................5 2.ProductInformation..........................................................................................................................................6 2.1ProductTechnicalDescription....................................................................................................................6 2.2TestFrequencyList.....................................................................................................................................6 2.3RelatedSubmittal(S)/Grant(S).................................................................................................................7 2.4TestMethodology........................................................................................................................................7 2.5ReceiverInputBandwidth...........................................................................................................................7 2.6EquallyAverageUseofFrequenciesandBehaviour.................................................................................7 2.7PseudorandomFrequencyHoppingSequence.........................................................................................8 2.8SpecialAccessories....................................................................................................................................9 2.9EquipmentModifications.............................................................................................................................9 2.10AntennaRequirement...............................................................................................................................9 3.TestEnvironment............................................................................................................................................10 3.1AddressofTheTestLaboratory................................................................................................................10 3.2TestFacility................................................................................................................................................10 3.3EnvironmentalConditions.........................................................................................................................11 3.4MeasurementUncertainty.........................................................................................................................11 3.5ListofEquipmentUsed.............................................................................................................................12 4.SystemTestConfiguration............................................................................................................................14 4.1EUTConfiguration....................................................................................................................................14 4.2EUTExercise............................................................................................................................................14 4.3ConfigurationofTestedSystem................................................................................................................14 4.4EquipmentUsedinTestedSystem..........................................................................................................15 4.5SummaryofTestResults..........................................................................................................................16 5.DescriptionofTestModes.............................................................................................................................17 6.RFOutputPowerMeasurement....................................................................................................................18 6.1ProvisionsApplicable................................................................................................................................18 6.2MeasurementProcedure..........................................................................................................................18 6.3MeasurementSetup(BlockDiagramofConfiguration)...........................................................................18 6.4MeasurementResult.................................................................................................................................18 7.20dBBandwidthand99%OccupiedBandwidthMeasurement...............................................................21 7.1ProvisionsApplicable................................................................................................................................21 7.2MeasurementProcedure..........................................................................................................................21 7.3MeasurementSetup(BlockDiagramofConfiguration)...........................................................................21 7.4MeasurementResults...............................................................................................................................22 8.ConductedBandEdgeandOut-of-BandEmissions..................................................................................24 8.1ProvisionsApplicable..................................................................................................…

Text truncated - open the document above for the full version.

Page1of12 AntennaTestReport ReportNo.:AGC07434231201PA01 PRODUCTDESIGNATION: PCBAntenna BRANDNAME: N/A MODELNAME: 2.4GHzantenna APPLICANT: WuhanJingchenIntelligentIdentificationTechnologyCo., Ltd. DATEOFISSUE: Jul.01,2024 REPORTVERSION: V1.1 AttestationofGlobalCompliance(Shenzhen)Co.,Ltd ReportNo.:AGC07434231201PA01 Page 2 of12 ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V1.01 st Dec.08,2023InalidInitialrelease V1.12 nd Jul.01,2024ValidUpdateEUT ReportNo.:AGC07434231201PA01 Page 3 of12 TABLEOFCONTENTS 1.PRODUCTINFORMATON........................................................................................................................4 2.TESTFACILITY.........................................................................................................................................5 3.TESTEQUIPMENTLIST..........................................................................................................................5 4.MEASUREMENTUNCERTAINTY............................................................................................................5 5.TESTSUMMARYLIST..............................................................................................................................5 6.TESTSETUP.............................................................................................................................................6 7.TESTRESULTS........................................................................................................................................7 7.1.VSWR.................................................................................................................................................7 7.2.GAINANDEFFICIENCY....................................................................................................................8 7.3.RADIATIONPATTERN.......................................................................................................................9 APPENDIXA:PHOTOGRAPHSOFTESTSETUP...................................................................................11 APPENDIXB:PHOTOGRAPHSOFEUT..................................................................................................12 ReportNo.:AGC07434231201PA01 Page 4 of12 1.PRODUCTINFORMATON Generalinformation Applicant WuhanJingchenIntelligentIdentificationTechnologyCo.,Ltd. Address CreativeWorkshopNo.5,CreativeWorld,YezhihuWestRoad,Hongshan District,Wuhan,China Manufacturer WuhanJingchenIntelligentIdentificationTechnologyCo.,Ltd. Address CreativeWorkshopNo.5,CreativeWorld,YezhihuWestRoad,Hongshan District,Wuhan,China Factory HuangpibranchofWuhanJingchenIntelligentIdentificationTechnologyCo., Ltd. Address 3rdFloor,Building1Workshop,Building1SpareWarehouse,Linkong EconomicDemonstrationIndustrialPark,HengdianStreet,HuangpiDistrict, Wuhan,China ProductDesignationPCBAntenna BrandNameN/A TestModel2.4GHzantenna SeriesModelN/A DifferenceDescriptionN/A DateofreceiptoftestitemDec.05,2023 DateoftestDec.05,2023toDec.08,2023 ReportTemplateAGCRT-ER-PA/V1.0 Technicalinformation FrequencyRange2400-2500MHz TestFrequencies 2400MHz,2410MHz,2420MHz,2430MHz,2440MHz,2450MHz,2460MHz, 2470MHz,2480MHz,2490MHz,2500MHz AntennaTypePCBantenna Dimensions11mm*5mm Impedance50Ω MaximumtestvaluesGain:-1.028dBi;Efficiency:10.534%;VSWR:1.094:1 TheaboveequipmentwastestedbyAttestationofGlobalCompliance(Shenzhen)Co.,Ltd. Thetestresultsofthisreportrelateonlytothetestedsampleidentifiedinthisreport. PreparedBy CiciLi (ProjectEngineer) Jul.01,2024 ReviewedBy CalvinLiu (Reviewer) Jul.01,2024 ApprovedBy MaxZhang (AuthorizedOfficer) Jul.01,2024 ReportNo.:AGC07434231201PA01 Page 5 of12 2.TESTFACILITY 3.TESTEQUIPMENTLIST EquipmentManufacturerModelCal.DateCal.Due ANTENNA MEASUREMENT SYSTEM ETS-LindgrenAMS-8600Nov.23,2023Nov.22,2024 NetworkAnalyzer R&S ZVL-6Sep.21,2023Sep.20,2024 TestsoftwareETS-Lindgren EMQuest (VerV1.12) N/AN/A 4.MEASUREMENTUNCERTAINTY Theuncertaintyiscalculatedusingthemethodssuggestedinthe“GuidetotheExpressionofUncertainty inmeasurement”(GUM)publishedbyCISPRandANSI. -UncertaintyofVSWR,Uc=±1.5dB -UncertaintyofGain,Uc=±0.8dB 5.TESTSUMMARYLIST NO.TestitemRemark 1VSWR-- 2Gainandefficiency-- 3Radiationpattern-- TestSiteAttestationofGlobalCompliance(Shenzhen)Co.,Ltd Location 1-2/F,Building19,JunfengIndustrialPark,ChongqingRoad,HepingCommunity, FuhaiStreet,Bao'anDistrict,Shenzhen,Guangdong,China ReportNo.:AGC07434231201PA01 Page 6 of12 6.TESTSETUP ReportNo.:AGC07434231201PA01 Page 7 of12 7.TESTRESULTS 7.1.VSWR Frequency(MHz)VSWR 24021.066:1 24501.061:1 24771.094:1 24801.087:1 ReportNo.:AGC07434231201PA01 Page 8 of12 7.2.GAINANDEFFICIENCY Frequency(MHz)Efficiency(dB)Efficiency(%)Gain(dBi) 2400-12.8305.211-6.034 2410-12.6285.458-5.506 2420-12.4165.733-5.144 2430-11.8306.561-4.442 2440-11.4237.205-3.741 2450-11.1327.704-3.163 2460-10.7658.384-2.502 2470-10.6248.661-2.061 2480-10.2419.458-1.508 2490-9.94310.132-1.279 2500-9.77310.534-1.028 ReportNo.:AGC07434231201PA01 Page 9 of12 7.3.RADIATIONPATTERN 2DPOLARRADIATIONPATTERN FREQUENCY=2400MHZ FREQUENCY=2450MHZ FREQUENCY=2500MHZ ReportNo.:AGC07434231201PA01 Page 10 of12 3DRADIATIONPATTERN FREQUENCY=2400MHZ FREQUENCY=2450MHZ FREQUENCY=2500MHZ ReportNo.:AGC07434231201PA01 Page 11 of12 APPENDIXA:PHOTOGRAPHSOFTESTSETUP ReportNo.:AGC07434231201PA01 Page 12 of12 APPENDIXB:PHOTOGRAPHSOFEUT VIEWOFANTENNA ----ENDOFREPORT---- Antenna Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report w…

Text truncated - open the document above for the full version.

ReportNo.:AGC07434260507FR01 Page56of65 Test_Graph_BR_HOP_ANT1_NA_1Mbps_2441_NumberofBusrt Test_Graph_BR_HOP_ANT1_NA_1Mbps_2441_TimeperBurst ReportNo.:AGC07434260507FR01 Page57of65 Test_Graph_BR_HOP_ANT1_NA_1Mbps_2480_NumberofBusrt Test_Graph_BR_HOP_ANT1_NA_1Mbps_2480_TimeperBurst ReportNo.:AGC07434260507FR01 Page58of65 12.FrequencySeparationMeasurement 12.1ProvisionsApplicable Whenthepowerislessthan0.125W:Theminimumpermissiblechannelseparationforthissystemis2/3the valueofthe20dBBW. Whenthepowerislessthan1W:Theminimumpermissiblechannelseparationforthissystemis20dBBW. 12.2MeasurementProcedure TheEUTshallhaveitshoppingfunctionenabled.Usethefollowingspectrumanalyzersettings: 1.Span:Wideenoughtoc…

Text truncated - open the document above for the full version.