2ARYR-D09010D09010-89 Luna Moonshadow

LUNA LAMP USER MANUAL English – Original user manual Version 1.0 issued on 03-03-23 2 3Luna lamp • User manual CONTENT Introduction 4 The story of Luna 4 Safety instructions 5 Intended use 5 Disclaimer 6 Recycling 6 Compliance 7 Simplified EU declaration of conformity 7 FCC 7 RSS of Industry 8 Product overview 9 Parts list 9 Specifications 10 Adapter specifications 10 Installation 11 Check the contents of the package 11 Assembling the lamp 11 Charging the lamp 12 Operating the lamp with the button 13 Installing the app 13 Connecting with the lamp 14 Use 16 Controlling the lamp 16 Create a group 20 Programming 22 Sharing 24 Maintenance 26 Replacing the LED light 26 Cleaning the lamp 28 Troubleshooting 29 4 INTRODUCTION Congratulations on the purchase of your Luna lamp. This user manual contains all the necessary information for the correct, efficient and safe use of your lamp. We encourage you to read this information carefully before installing or using the product. We recommend to store this user manual in a safe place with the product for future reference. THE STORY OF LUNA A party with friends gave the founding partners of international design agency Yabu Pushelberg the idea to create Luna, a collection of wireless mood lanterns that connect people with nature. Versatile contemporary design, uniting people with their environment, smart inaugural lighting, multi-purpose design. The Luna portable lanterns excel at what they were designed for: connecting people with their surroundings. 5Luna lamp • User manual SAFETY INSTRUCTIONS ⚠ Only use the product as described in this manual. ⚠ Do not use a damaged product. ⚠ Do not use the product if a part is damaged or defective. Replace a damaged or defective part immediately. ⚠ Do not drop the product and avoid bumping. ⚠ Do not immerse the product in water. ⚠ Always switch off the lamp before installation or maintenance work. ⚠Only charge the lamp with an USB-C cable. Any other USB types may damage the lamp. ⚠Do not charge the lamp outdoors. Only charge the lamp indoors. ⚠ Any changes made to the product can have consequences for safety, correct operation and warranty procedures. INTENDED USE The product is only intended as indoor or outdoor LED lighting. Any change to the product can have consequences for safety, warranty and correct operation. 6 DISCLAIMER Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognised as such. RECYCLING Our products are packaged in environmentally friendly materials that can be recycled, disposed of or destroyed without endangering the environment. This symbol indicates that a product should not be thrown away with other household waste throughout the EU to prevent possible harm to the environment or human health by uncontrolled waste disposal. You are responsible for recycling in order to promote the sustainable reuse of raw materials. 7Luna lamp • User manual COMPLIANCE Luna complies with Low Voltage, EMC, Ecodesign and RoHS directives. SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, Tribù NV declares that the radio equipment type lamp is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.tribu.com/en/collections/luna/lamp/ FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device must not cause harmful interference, and (2) the user must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 8 If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a different circuit from the receiver. - Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with the FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm between the source of interference (in this case Bluetooth) and your body. RSS OF INDUSTRY This device complies with Industry Canada’s licence-exempt RSS. Operation is subject to the following two conditions: (1) This device must not cause interference; and (2) This user must accept any interference, including interference that may cause undesired operation of the device. To maintain compliance with RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the lamp and your body. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Pour maintenir la conformité aux directives d’exposition aux radiofréquences, c…

Text truncated - open the document above for the full version.

Maiori Design Company Limited 2023.03.23 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for 2ARYR-D09010 [Maiori Design Company Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name): Capri Zeng Maiori Design Company Limited 2023.03.23 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for 2ARYR-D09010 [Maiori Design Company Limited (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name): Capri Zeng

Maiori Design Company Limited 2023.02.23 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: D09010-89 Luna Moonshadow Trademark: MODEL: D09010-89 FCC ID:2ARYR-D09010 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Capri Zeng / QA Engineer Contact information / address: Unit 1-3, 17/F, Shun Kwong Commercial Building, 8 Des Voeux Road West, Sheung Wan, Hong Kong, China.

Maiori Design Company Limited 2023.03.23 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Capri Zeng / QA Engineer Contact information / address: Unit 1-3, 17/F, Shun Kwong Commercial Building, 8 Des Voeux Road West, Sheung Wan, Hong Kong, China.

External Photos

Label & label location 20 mm*10mm FCC ID:2ARYR-D09010 Label location

Internal Photos Antenna

RF EXPOSURE EVALUATION METHOD FCC ID:2ARYR-D09010 Applicable standard： In accordance with FCC 47 CFR part 2 (2.1093) this device has been defined as a portable device which is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. Portable devices must be evaluated using the specified in FCC 47 CFR part 2 (2.1093) and ANSI/IEEEC95.1-1992. and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528-2003. Per FCC KDB 447498 D01 v06, the 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances s 50 mm are determined by: SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. BLE Modulation Test Channel Output Power (dBm) Limit (dBm) GFSK 2402 -0.03 30 GFSK 2440 0.35 30 GFSK 2480 0.64 30 max possible output power (PK,conducted)：1±1dBm -1.41dBi logarithmic terms convert to numeric result is nearly 0.723 2dBm=1.58mW 2402MHz [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)]=1.58/5*√2.402 =0. 49≤3.0 2440MHz [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)]= 1.58/5*√2.440 =0. 50≤3.0 2480MHz [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)]= 1.58/5*√2.48=0. 50≤3.0 Conclusion: 1. [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] < 3.0. 2. SAR Test Exclusion Thresholds is 3.0 for separation distance 5mm. Therefore, SAR test is not required.

深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO., Limited Address: 1st Floor, Wanhe Pharmaceutical Park, No. 8, Gaoxin Zhongyi, Nanshan District, Shenzhen City, China. 1 / 9 天线测试报告 SPECIFICATIONFOR APPROVAL 客户欧创 CUSTOMER: 客 户 料 号 CUSTOMERNO : 品名 PART NAME:2400-2500MHz（板载天线） 供 方 料 号 SUPPLIERNO: 日期Date: 20 23 .03.15 客户确认CUSTOMERAPPROVEDBY APPROVALCHIEFSUPERVISOR 供方确认SUPPLIERSIGNATURE APPROVALCHECKDESIGN 赵旋旋陈娜张权 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO., Limited 2 / 9 实验室测试环境及设备 测试项目（Test Project）： S11 、S12、VSWR、Efficiency、Gain3D RadiationPattern、TRP 、 TIS Address: 1st Floor, Wanhe Pharmaceutical Park, No. 8, Gaoxin Zhongyi, Nanshan District, Shenzhen City, China. 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO., Limited 3 / 9 規 格 承 認 書 ....................................................................................................................................................3 1. 技术指标（ TechnicalIndex ） ....................................................................................................................4 3. 天线测试数据（ Antennatest data ） ......................................................................................................5-9 Address: 1st Floor, Wanhe Pharmaceutical Park, No. 8, Gaoxin Zhongyi, Nanshan District, Shenzhen City, China. 深圳有力科技有限公司 ShenZhen Powerful Technology CO., Limited 4 / 9 1.技术指标（Technical Index） 频率范围Frequency Range（MHz）2400-2500MHz 增益Gain（dBi）2400-2500MHz@ MAX -1.41dBi 天线类型type板载 Antenna Size:(Unit mm) Address: 1st Floor, Wanhe Pharmaceutical Park, No. 8, Gaoxin Zhongyi, Nanshan District, Shenzhen City, China. 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO., Limited 5 / 9 3.天线测试数据（Antennatest data） 3-1 无源效率 / 增益 PassiveTestFor 2.4G FreqEffiGain (MHz)(%)(dBi) 240010.64-4.59 240510.79-4.57 241011.51-4.37 241512.43-4.13 242012.73-4.17 242513.69-3.99 243015.95-3.43 243516.55-3.38 244016.89-3.43 244518.12-3.16 245018.83-3.09 245519.06-3.1 246019.29-3.1 246520.31-2.96 247021.99-2.64 247523.61-2.43 248025.63-2.1 248527.74-1.81 249030.33-1.41 249531.41-1.36 250030.21-1.54 Address: 1st Floor, Wanhe Pharmaceutical Park, No. 8, Gaoxin Zhongyi, Nanshan District, Shenzhen City, China. 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO., Limited 6 / 9 3-2方向图 Address: 1st Floor, Wanhe Pharmaceutical Park, No. 8, Gaoxin Zhongyi, Nanshan District, Shenzhen City, China. 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO., Limited 7 / 9 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO., Limited 8 / 9 Address: 1st Floor, Wanhe Pharmaceutical Park, No. 8, Gaoxin Zhongyi, Nanshan District, Shenzhen City, China. 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO., Limited 9 / 9 Address: 1st Floor, Wanhe Pharmaceutical Park, No. 8, Gaoxin Zhongyi, Nanshan District, Shenzhen City, China.

No.：BCTC/RF-EMC-00 5 Page: 1 of 43 Edition：A.5 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2303906418E Applicant: Maiori Design Company Limited Product Name: D09010-89 Luna Moonshadow Model/Type Ref.: D09010-89 Tested Date: 2023-03-09 to 2023-03-16 Issued Date: 2023-03-16 Report No.: BCTC2303906418E No.：BCTC/RF-EMC-00 5 Page: 2 of 43 Edition：A.5 FCC ID:2ARYR-D09010 The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: D09010-89 Luna Moonshadow Trademark: Model/Type Ref.: D09010-89 Prepared For: Maiori Design Company Limited Address: Unit 1-3, 17/F, Shun Kwong Commercial Building, 8 Des Voeux Road West, Sheung Wan, Hong Kong, China. Manufacturer: EI Dongguan Limited Address: No.3 Fukang West Road, Honghualin Industrial Zone, Chongkoushequ, Houjie Dongguan, 523947 China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2023-03-09 Sample tested Date: 2023-03-09 to 2023-03-16 Issue Date: 2023-03-16 Report No.: BCTC2303906418E Test Standards: FCC Part15.247 ANSI C63.10-2013 Test Results: PASS Remark: This is Bluetooth BLE radio test report. Tested by: Approved by: Jeff.Fu/Project Handler Zero Zhou/Reviewer Report No.: BCTC2303906418E No.：BCTC/RF-EMC-00 5 Page: 3 of 43 Edition：A.5 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information And Test Setup ..................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 8 4.3 Support Equipment ............................................................................................... 8 4.4 Channel List .......................................................................................................... 9 4.5 Test Mode ............................................................................................................. 9 4.6 Table Of Parameters Of Text Software Setting ..................................................... 9 5. Test Facility And Test Instrument Used ............................................................... 10 5.1 Test Facility ......................................................................................................... 10 5.2 Test Instrument Used .......................................................................................... 10 6. Conducted Emissions .......................................................................................... 12 6.1 Block Diagram Of Test Setup .............................................................................. 12 6.2 Limit .................................................................................................................... 12 6.3 Test Procedure ................................................................................................... 12 6.4 EUT Operating Conditions .................................................................................. 12 6.5 Test Result .......................................................................................................... 13 7. Radiated Emissions ............................................................................................. 15 7.1 Block Diagram Of Test Setup .............................................................................. 15 7.2 Limit .................................................................................................................... 16 7.3 Test Procedure ................................................................................................... 17 7.4 EUT Operating Conditions .................................................................................. 18 7.5 Test Result .......................................................................................................... 18 8. Radiated Band Emission Measurement And Restricted Bands Of Operation ..... 22 8.1 Block Diagram Of Test Setup .............................................................................. 22 8.2 Limit .................................................................................................................... 22 8.3 Test Procedure ................................................................................................... 23 8.4 EUT operating Conditions ................................................................................... 23 8.5 Test Result .......................................................................................................... 24 9. Power Spectral Density Test ............................................................................... 25 9.1 Block Diagram Of Test Setup .............................................................................. 25 9.2 Limit .................................................................................................................... 25 9.3 Test Procedure ................................................................................................... 25 9.4 EUT Operating Conditions .................................................................................. 25…

Text truncated - open the document above for the full version.

Report No.: BCTC2303906418E No.：BCTC/RF-EMC-00 5 Page: 41 of 43 Edition：A.5 15. EUT Test Setup Photographs Conducted Measurement Photo Radiated Measurement Photos Report No.: BCTC2303906418E No.：BCTC/RF-EMC-00 5 Page: 42 of 43 Edition：A.5