2ARZ5-Y8035-IN-1 Multifunctional Wireless Charger

including interference that may cause undesired operation . Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to (1) This device may not cause harmful interference, FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: and (2) this device must accept any interference received, provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Rev 1/26/2023 Shenzhen Smacat Electronic Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 09, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2ARZ5-Y803 [Shenzhen Smacat Electronic Technology Co., Ltd ] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Smacat Electronic Technology Co., Ltd ] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Qian QongMei Rev 1/26/2023 Shenzhen Smacat Electronic Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 09, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2ARZ5-Y803 [Shenzhen Smacat Electronic Technology Co., Ltd ] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Qian QongMei

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: HOPEK CORPORATION INC Address: 16755 Coyote Bush Dr Unit 84, San Diego, CA 92127 United States FRN: 0034562900 Contact Name: Peter Davis Telephone No: 561-235-6113 E-mail: [email protected] This letter is to confirm that the US Agent for Service of Process accepts responsibility to act as a local representative on behalf of Shenzhen Smacat Electronic Technology Co., Ltd The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Applicant: Company Name: Shenzhen Smacat Electronic Technology Co., Ltd Product Description: 5-IN-1 Multifunctional Wireless Charger FRN: 0028060572 Grantee Code: 2ARZ5 FCC ID: 2ARZ5-Y803 Contact Name: Qian QongMei Address: 5th Floor, Building A6, Yangbei Industrial Zone, Huangtian Hangcheng, Baoan Shenzhen, Guangdong China Telephone No: 13642402024 E-mail: [email protected] The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. This Agreement is valid until (Permanently valid). Date: 2026/01/15 Applicant’s Name: Shenzhen Smacat Electronic Technology Co., Ltd US Agent for Service of Process’s Name: HOPEK CORPORATION INC Title: Manager Title: Manager Signature Signature

Fine Page 1 of 4 SPECIFICATION FOR APPROVAL CUSTOMER: CUST P/N: FINE P/N: G43.5 - 6.3uH Single coil 0.08*80P*11TS DESC: Φ43.5MM x 2.0MM plastic + grooved hard magnetic material DATE: 2022/08/04 Version: A.0 PREPARED BY CHECKED BY APPROVED BY CUSTOMER APPROVE Huang Yanming Huang Dongming Huang Jinhua Shenzhen Songdao Technology Co., Ltd. Factory Address: Building 2, 8th Floor, Sanjia High-tech Industrial Park, No. 123, Junfa Third Road, Dongkeng Town, Dongguan City TEL：13728755750 FAX：0755-84526500 E-mail：[email protected] Fine Page 2 of 4 Version Change History Rev. Before Change After Change Change Date Approved By A.0 new issue ---- 2018/04/24 Huang Jinhua Fine Page 3 of 4 SPECIFICATION DESC Φ21x40-6.5uH-0.08x80P-25mm Rev：A.0 CUST: XXX CUST P/N: 一、DIMENSION:(mm) 二、SCHEMATIC DIAGRAM: A 43.5±0.5 B 40±0.5 C 20.5±0.5 D 25±2 E 3±2 G 2.0±0.2 Note: 1. Cross-line method; 2. Coil is attached to a circular plastic with a magnetic sheet slot. The size of the magnetic sheet is 43.5 ± 0.5 mm, the thickness is 2.0 ± 0.2 mm, and it is equipped with a back adhesive. 三、Winding Specification: NO. TERMINAL WIRE Turns Winding Direction 1 S F Silk braided cable 0.08*80P 11Ts CCW 四、ELECTRICAL CHARACTERISTICS: TEMPERATURE:25±10°C, RELATIVE HUMIDITY:65±20% NO. ITEM TERMINAL SPECIFICATION TEST FREQUENCY TEST EQUIPMENTS 1 IND. S-F 4.0uH ±20% Single Coil 100KHz/1.0V LCZ METER 1062B 2 IND. S-F 6.3uH ±10% with magnetic sheet 100KHz/1.0V LCZ METER 1062B 3 DCR S-F ≤55mΩ 100KHz/1.0V LCZ METER 502B 4 Q S-F ≥51 100KHz/1.0V LCZ METER 502B PREPARED BY/DATE CHECKED BY/DATE Huang Yanming 2022/08/04 Huang Jinhua 2022/08/04

Fine Page 1 of 4 SPECIFICATION FOR APPROVAL CUSTOMER: Shenzhen Xinyinxin Technology Co., Ltd. CUST P/N: FINE P/N: G43.5 - 6.5UH Single coil 0.08*105P*12TS DESC: Φ43.5MM x 5.0MM x 0.8MM - Two slots are provided DATE: 2024/03/14 Version: A.0 PREPARED BY CHECKED BY APPROVED BY CUSTOMER APPROVE Huang Yanming Huang Dongming Huang Jinhua Dongguan Xi Liang Gancheng Technology Co., Ltd. Factory Address: Building 2, 8th Floor, Sanjia High-tech Industrial Park, Junfa Road, Dongkeng Town, Dongguan City TEL：0769-82989159 FAX：0769-82989159 E-mail：[email protected] Fine Page 2 of 4 Version Change History Rev. Before Change After Change Change Date Approved By A.0 new issue ---- 2024/03/14 Huang Yanming Fine Page 3 of 4 SPECIFICATION DESC Φ16.5x39.5-6.5uH-0.08x105P-35mm Rev：A.0 CUST: XXX CUST P/N: 一、DIMENSION:(mm) 二、SCHEMATIC DIAGRAM: A 75±2 B 3±2 C 16.5±1 D 39.5±1 E 43.6±0.5 Note: 1. Cross-line method; 2. Apply 8mm (ref) width heat-resistant adhesive tape at the exit position for 1-2 times; 1.3. The coil is attached to the circular hard magnetic sheet with slots. The size of the magnetic sheet is 43.5 ± 1mm, the inner hole is 5.0mm, and the thickness is 0.8 ± 0.1mm. 三、Winding Specification: NO. TERMINAL WIRE Turns Winding Direction 1 S F Silk braided cable 0.08 * 105P 11Ts CCW 四、ELECTRICAL CHARACTERISTICS: TEMPERATURE:25±10°C, RELATIVE HUMIDITY:65±20% NO. ITEM TERMINAL SPECIFICATION TEST FREQUENCY TEST EQUIPMENTS 1 IND. S-F 3.8uH ±20% Single Coil 100KHz/0.25V LCZ METER 1062B 2 IND. S-F 6.3uH ±10% with magnetic sheet 100KHz/0.25V LCZ METER 1062B 3 DCR S-F ≤43mΩ 100KHz/0.25V LCZ METER 502B 4 Q S-F ≥75 100KHz/0.25V LCZ METER 502B PREPARED BY/DATE CHECKED BY/DATE Huang Yanming 2024/03/14 Huang Jinhua 2024/03/14

SPECIFICATION FOR APPROVAL 芯闻芯科技（深圳）有限公司 ： CUSTOMER`S NAME SP03050 ： CUSTOMER`S P/N Y.WAC.043 ： PRODUCT SPEC 2023年4月17日 ： ISSUE DATE PREPARED BYCHECKED BYAPPROVED BYCUSTOMER APPROVE Li Bei Cheng Jie Li Bowen DONGGUAN BOHONG TECHNOLOGY CO., LTD ADD：4th Floor, No. 533, Fumin Middle Road, Dalong Town, Dongguan City TEL：0769-82866410 FAX ：0769-82866409 工程部专用章 科 红 博 市 莞 东 技 有 限 公 司 DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL CUSTOMER Xin wen xin CUSTOMER`S P/N SP03050 ISSUE DATE Apr. 17, 2023 PRODUCT SPEC Y.WAC.043 SPECIFICATION CONTROL DRAWING REVISIONS REV DESCRIPTIONDATEISSUE BY APPROVAL BY A INITIAL Apr. 17, 2023 Li BeiLi Bowen 工程部专用章 红 博 市 莞 东 技 有 限 公 司 DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL CUSTOMERCUSTOMER`S P/N SP03050 ISSUE DATEPRODUCT SPEC Y.WAC.043 1.MATERIAL: NOITEMTYPESUPPLIERSUL FILE NO 1 magnetic sheet MnZn-Ferrite (A06-1L) QS/ 2 wire rod [email protected]*24P FSFYE303260 3 glue BE818 BEE468573 4 tin Sn99.3:Cu0.7 BTL/ 5 gum 17.5*0.1 HG/ 6 magnet 7.5*2 LC/ 工程部专用章 红 博 市 莞 东 技 有 限 公 司 Xin wen xin Apr. 17, 2023 DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL CUSTOMERCUSTOMER`S P/N SP03050 ISSUE DATEPRODUCT SPEC Y.WAC.043 2.DIMENSION： Note： Double-sided adhesive on the back, with a handle; Magnet: 7.5 * 2mm, with a magnetic strength of 3200REF; The magnetic leads do not cross each other. ISSUE Li Bei CHECK Cheng Jie APPROVAL Li Bowen BYBYBY 工程部专用章 红 博 市 莞 东 技 有 限 公 司 Xin wen xin Apr. 17, 2023 size: mm DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL CUSTOMERCUSTOMER`S P/N SP03050 ISSUE DATEPRODUCT SPEC Y.WAC.043 4.CIRCUIT DIAGRAM 5.WINDING NOWINDINGWIRETURNSTAPEWINDING CONDITION N1 S-FØ0.08*24P 14 / CCW 6.CHARACTERISTIC ITEMMEASURED POINTTECHNICAL DATATESTING CONDITION & INSTRUMENT LS S-F7.8-8.1uH LCR1062 100KHz/1V AT 25°C±2°C Q S-F27±5 LCR1062 100KHz/1V AT 25°C±2°C 工程部专用章 司 公 限 有 技 红 博 市 莞 东 工程部专用章 司 公 限 有 技 科 红 博 市 莞 东 Xin wen xin Apr. 17, 2023 DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL CUSTOMERCUSTOMER`S P/N SP03050 ISSUE DATEPRODUCT SPEC Y.WAC.043 7.THE PACKING WAY 1.Pearl cotton specification: 355*235*28mm, 136 grids; 2.pieces per grid, 272 pieces per box; 3. 10 boxes per carton; 4. Total quantity per carton: 2720 pieces; 5. Carton material: K = K++. 工程部专用章 司 公 限 有 技 科 红 博 市 莞 东 工程部专用章 司 公 限 有 技 红 博 市 莞 东 Xin wen xin Apr. 17, 2023

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen Smacat Electronic Technology Co., Ltd Date: Jan. 09, 2026 Product Model Number: Y803 FCC ID: 2ARZ5-Y803 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 13642402024 On behalf of: Shenzhen Smacat Electronic Technology Co., Ltd

Shenzhen Smacat Electronic Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: January 9, 2026 Subject; Request for Confidentiality FCC ID: 2ARZ5-Y803 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Qian QongMei Title: Manager

Ext Photos Model: Y803 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7

239.9 237 109.1 24.4 FCC ID Input： Type-c：9V3A/12V3A/15V3A/20V3A，60W Output：Type-c：5V3A/15W, 9V3A/27W, 12V2.5A/30W 15V2A/30W,20V1.5A/30W Output: 2.5W for Watch 5W for Earbuds 15W(MAX) for Phone 2ARZ5-Y803 5-IN-1 Multifunctional Wireless Charger Model：Y803 Made in China Screen printing color Screen printing color PANIONE Cool Gray 8 C Bottom cover screen printing PANIONE Cool Gray 8 C Soldering of the base plate cover pattern

Int Photos Model: Y803 Photo 1 Photo 2 Photo 3 Photo 4 Phone ANT AirPods ANT Watch ANT Photo 5 Photo 6 Photo 7 Photo 8 Photo 9 Photo 10

- Page 1 of 11 - Report No.: HB20251226003E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: 5-IN-1 Multifunctional Wireless Charger Trade Mark: N/A Model Number: Y803 FCC ID: 2ARZ5-Y803 Prepared for Shenzhen Smacat Electronic Technology Co., Ltd 5th Floor, Building A6, Yangbei Industrial Zone, Huangtian Hangcheng, Baoan Shenzhen, Guangdong China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 11 - Report No.: HB20251226003E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT ................................................................................................................................ 8 4 RF EXPOSURE .................................................................................................................................................. 9 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Procedures ........................................................................................................................................... 9 4.1.3. Test Setup .................................................................................................................................................... 9 4.1.4. Test Result ................................................................................................................................................... 9 5 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 11 - Page 3 of 11 - Report No.: HB20251226003E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Smacat Electronic Technology Co., Ltd Address ................................. : 5th Floor, Building A6, Yangbei Industrial Zone, Huangtian Hangcheng, Baoan Shenzhen, Guangdong China Manufacturer's Name .......... : Shenzhen Smacat Electronic Technology Co., Ltd Address ................................. : 5th Floor, Building A6, Yangbei Industrial Zone, Huangtian Hangcheng, Baoan Shenzhen, Guangdong China Product description Product name ........................ : 5-IN-1 Multifunctional Wireless Charger Model Number ....................... : Y803 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Dec. 26, 2025~Jan. 09, 2026 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 11 - Report No.: HB20251226003E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision Hi…

Text truncated - open the document above for the full version.

- Page 1 of 34 - Report No.: HB20251226003E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: 5-IN-1 Multifunctional Wireless Charger Trade Mark: N/A Model Number: Y803 FCC ID: 2ARZ5-Y803 Prepared for Shenzhen Smacat Electronic Technology Co., Ltd 5th Floor, Building A6, Yangbei Industrial Zone, Huangtian Hangcheng, Baoan Shenzhen, Guangdong China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 34 - Report No.: HB20251226003E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 6 1.5 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................. 7 3 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 8 4 LIST OF TEST EQUIPMENT .............................................................................................................................. 10 5 TEST ITEM AND RESULTS ............................................................................................................................... 12 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................................. 13 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 22 6 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 24 7 PHOTOGRAPHS OF THE EUT .......................................................................................................................... 26 - Page 3 of 34 - Report No.: HB20251226003E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Smacat Electronic Technology Co., Ltd Address ................................. : 5th Floor, Building A6, Yangbei Industrial Zone, Huangtian Hangcheng, Baoan Shenzhen, Guangdong China Manufacturer's Name .......... : Shenzhen Smacat Electronic Technology Co., Ltd Address ................................. : 5th Floor, Building A6, Yangbei Industrial Zone, Huangtian Hangcheng, Baoan Shenzhen, Guangdong China Product description Product name ........................ : 5-IN-1 Multifunctional Wireless Charger Model Number ....................... : Y803 Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Dec. 26, 2025~Jan. 09, 2026 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 34 - Report No.: HB2025122…

Text truncated - open the document above for the full version.

Photographs of the Test Setup Model: Y803 Radiated Emission Below 30MHz Radiated Emission Above 30MHz Conducted emission MPE