2AS4DR01WRobot Wheels

1.Lay the map, flatten creases → locate START (B5), CHECKPOINT (B2), and GOAL (B1). Place an obstacle (≥4 cm wide/light-colored for better detection) on the side of grid B2 closest to the robot. 2. Plan your route (Ensure the robot uses sensor commands to perform specified actions when passing through the obstacle grid) → arrange the code cards accordingly (many routes possible). 3.Short-press the power button to activate the robot → Input commands in the order from step 2. 4. Place the robot on the start point → press the start button and watch it go! Example: Activity Card 9 – Move from B5 to B1 via ob- stacle grid B2 b. Sensor Mode Example: Activity Card 7 – Move from A3 to C1 via loop grid C3 1.Lay the map, flatten creases → locate START (A3), CHECKPOINT (C3), and GOAL (C1). 2. Plan your route (Ensure the robot uses loop commands to perform specified actions when passing through the loop grid) → arrange the code cards accordingly (many routes possible). 3.Short-press the power button to activate the robot → Input commands in the order from step 2. 4. Place the robot on the start point → press the start button and watch it go! a. Loop Mode 3.2.2 Advanced Play 1.Lay the map, flatten creases → locate START (A1), CHECKPOINT (B4), and GOAL (D2). 2. Plan your route → arrange the code cards accordingly (many routes possible). 3.Short-press the power button to activate the robot → Input commands in the order from step 2. 4. Place the robot on the start point → press the start button and watch it go! 3.2.1 Basic Play Example: Activity Card 4 – Move from A1 to D2 via B4 Please check the activity cards and activity guide first! Flatten the map before use, especially along creases. Play with the Activity Card and Map!Play with the Activity Card and Map! 3.2 Gameplay Instructions 1. New commands can be appended after program execution completes. Pressing START again will restart execution from the beginning, including the newly added commands. Commands are only cleared by CLEAR or by powering off. 2. Maximum 64 commands per program; exceeding this triggers a sound-and-light error. 3. Only one SENSOR subroutine and one LOOP subroutine are allowed. To modify, long-press (3s) CLEAR to clear all commands and re-enter them. 4. During execution, only the Pause button is functional. After pausing, only the Start button can resume execution—other buttons are disabled. NOTES LED INDICATOR 4 LED lights with 7 colors indicate different statuses SPEAKER Plays sound effects and music. CLEAR – Short press: clear the last command. – Long press (3s): clear all commands. ACTION Robot has 3 built-in demo routines. A short press will randomly execute one of them. FORWARD: Robot moves forward one step. REVERSE: Robot moves reverse one step. TURN LEFT: Robot turns 90° left on the spot. TURN RIGHT: Robot turns 90° right on the spot. START / PAUSE – First short press: executes entered commands in order. – Second short press: pauses immediately. – Single press: Starts Double press: Pauses SENSOR Press to enable object detection. If an object is detected during program execution, the robot will immediately execute the set SENSOR subroutine. If the subroutine is empty, the program pauses by default. POWER BUTTON When off: – Short press once → Powers on in Button Mode. – Short press 3 times → Powers on in Bluetooth Mode. When on: – Short press once → Powers off. LOOP Press to repeat a single command or a series of commands (i.e., the LOOP subroutine). Press the Sensor button — all subsequent commands will belong to the SENSOR sub-routine. Thus, this SENSOR subroutine can only be set at the end of the program. Example: FORWARD – FORWARD – FORWARD – SENSOR – TURN RIGHT (This program makes the robot move forward 3 steps. If an object is detected during movement, it will immediately turn right before continuing the remaining commands. If no object is detected, it will only execute the 3 forward steps.) NOTES: 1.Upon detection, the SENSOR subroutine executes immediately. If triggered again during execution, the subroutine restarts. 2. A running command is interrupted as soon as an object is detected; after the SENSOR subroutine finishes, the main program resumes. 3.Only one SENSOR subroutine is allowed. 4. The SENSOR subroutine must be set at the program’s end. Pressing START confirms the SENSOR subroutine—subsequent added commands are not part of it. Clear commands within the subroutine re-enter the SENSOR subroutine setup mode. Setting the SENSOR subroutine Due to product design characteristics, robot movements (e.g., travel distance, rotation angle) may have slight variances. These may accumulate and amplify with repeated commands. TO PARENTS Marked functions are more advanced. Press the Loop button, enter the commands you want repeated, then press Loop again to close the subroutine. These commands form the LOOP subroutine. Each Loop press in the program executes the LOOP subroutine as many times as LOOP appears in the main program. Example: LOOP – TURN RIGHT – TURN RIGHT – TURN RIGHT – TURN RIGHT – LOOP – FORWARD – LOOP (This program makes the robot turn clockwise twice, move one step forward, then turn once.) NOTES: 1.No SENSOR commands are allowed inside a LOOP subroutine. 2. If only the start (no end) of the loop is set, the commands inside are treated as normal commands, and the LOOP subroutine fails to form. 3.The LOOP subroutine cannot be empty or exceed 6 commands. 4. Only one LOOP subroutine can be set per program, but it can be invoked multiple times. 5. When deleting, if the closing LOOP is removed, the robot re-enters LOOP-setup mode. Setting the LOOP subroutine 3.1 Function Introduction BUTTON MODE3 WARNING! To avoid battery leakage, please follow these instructions carefully. Failure to follow these instructions can result in battery acid leakage that may cause burns, personal injury, and property damage. Battery Care and Maintenance Tips •Be sure to insert batteries correctly (with adult supervision) and alway…

Text truncated - open the document above for the full version.

Bluetoothfrequency:2402MHz-2480MHz,transmittingpower<0dBm Manufacturername:ApitorTechnologyCo.,Ltd. Manufactureraddress:3rdFloor,BuildingA,TengminTechnologyPark,GongheIndustrialRoad,Xixiang,Baoan,Shenzhen,China Supplier'sDeclarationofConformity 47CFR§2.1077ComplianceInformation UniqueIdentifier TradeName:RobotWheels ModelNo.: APR011 FCCID:2AS4DR01W IC:33012-R01W ResponsibleParty-U.S.ContactInformation USCompanyName：X-mediaUSAInc. Address：307PaseoTesoro,Walnut,CA91789 Internetcontactinformation:[email protected] FCCComplianceStatement ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmful interference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. FCCRegulatoryCompliance ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseharmful interference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsare designedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradio frequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However, thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation. Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,the userisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures: --Reorientorrelocatethereceivingantenna. --Increasetheseparationbetweentheequipmentandreceiver. --Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected. --Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Caution:changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser’sauthoritytooperatethe equipment. ISEDComplianceStatements Thisdevicecontainslicence-exempttransmitter(s)/receiver(s)thatcomplywithInnovation,ScienceandEconomicDevelopmentCanada’slicence-exempt RSS(s).Operationissubjecttothefollowingtwoconditions: (1)Thisdevicemaynotcauseinterference. (2)Thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice. L’émetteur/récepteurexemptdelicencecontenudansleprésentappareilestconformeauxCNRd’Innovation, SciencesetDéveloppementéconomique Canadaapplicablesauxappareilsradioexemptsdelicence.L’exploitationestautoriséeauxdeuxconditionssuivantes: (1)L’appareilnedoitpasproduiredebrouillage; (2)L’appareildoitacceptertoutbrouillageradioélectriquesubi,mêmesilebrouillageestsusceptibled’encompromettrelefonctionnement. RFExposureCompliance ThisequipmentcomplieswithFCC/ICradiationexposurelimitssetforthforanuncontrolledenvironment.Thisequipmentisinstalledandoperated withminimumdistance20cmbetweentheradiatorandhumanbody. Cetéquipementestconformeauxlimitesd'expositionauxrayonnementsFCC/ICétabliespourunenvironnementnoncontrôlé.Cetéquipementestinstallé etutilizeàavecunedistanceminimalede20cmentreleradiateuretlecorpshumain. ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolledenvironment.Thistransmittermustnotbeco-locatedor operatinginconjunctionwithanyotherantennaortransmitter. Bluetoothfrequency:2402MHz-2480MHz,transmittingpower<0dBm Manufacturername:ApitorTechnologyCo.,Ltd. Manufactureraddress:3rdFloor,BuildingA,TengminTechnologyPark,GongheIndustrialRoad,Xixiang,Baoan,Shenzhen,China Supplier'sDeclarationofConformity 47CFR§2.1077ComplianceInformation UniqueIdentifier TradeName:RobotWheels ModelNo.: APR011 FCCID:2AS4DR01W IC:33012-R01W ResponsibleParty-U.S.ContactInformation USCompanyName：X-mediaUSAInc. Address：307PaseoTesoro,Walnut,CA91789 Internetcontactinformation:[email protected] FCCComplianceStatement ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmful interference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. FCCRegulatoryCompliance ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseharmful interference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsare designedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradio frequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However, thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation. Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,the userisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures: --Reorientorrelocatethereceivingantenna. --Increasetheseparationbetweentheequipmentandreceiver. --Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected. --Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Caution:changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser’sauthoritytooperatethe equipment. ISEDComplianceStatements Thisdevicecontainslicence-exempttransmitter(s)/receiver(s)thatcomplywithInnovation,ScienceandEconomicDevelopmentCanada’slicence-exempt RSS(s).Operationissubjecttothefollowingtwoconditions: (1)Thisdevicemaynotcauseinterference. (2)Thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice. L’émetteur/récepteurexemptdelicencecontenudansleprésentappareilestconformeauxCNRd’Innovation, SciencesetDéveloppeme…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 5 Appendix External Photos for SZCR2510004446ET FCC ID: 2AS4DR01W SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 5 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 5 Appendix Internal Photos for SZCR2510004446ET FCC ID: 2AS4DR01W SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 5 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR251000444603 Page: 1 of 9 Keny Xu EMC Laboratory Manager RF Exposure Evaluation Report Application No.: SZCR2510004446ET (SGS SZ NO.: T52510350024EM) Applicant: Apitor Technology Co., Ltd. Address of Applicant: 3rd Floor, Building A, Tengmin Technology Park Xixiang, Baoan Shenzhen 518000 China Manufacturer: Apitor Technology Co., Ltd. Address of Manufacturer: 3rd Floor, Building A, Tengmin Technology Park Xixiang, Baoan Shenzhen 518000 China Equipment Under Test (EUT): EUT Name: Robot Wheels Item No.: APR011 Country of Origin: China Country of Destination: US Requested Age Grading: 3+ FCC ID: 2AS4DR01W Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2025-10-15 Date of Evaluation: 2025-10-28 to 2025-11-11 Date of Issue: 2025-11-17 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR251000444603 Page: 2 of 9 Revision Record Version Chapter Date Modifier Remark 01 2025-11-17 Original Authorized for issue by: Martin Tang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR251000444603 Page: 3 of 9 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 4 3.4 Test Location ...................................................................................................................................... 5 3.5 Test Facility ........................................................................................................................................ 5 3.6 Deviation from Standards ................................................................................................................... 5 3.7 Abnormalities from Standard Conditions ........................................................................................... 5 4 FCC Radiofrequency radiation exposure limits .................................................................................... 6 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 6 4.2 MPE-based Exemption ...................................................................................................................... 6 4.3 SAR-based Exemption ....................................................................................................................... 7 5 Measurement and Calculation ................................................................................................................. 9 5.1 Maximum transmit power ................................................................................................................... 9 5.2 RF Exposure Calculation ................................................................................................................... 9 6 EUT Constructional Details (EUT Photos) ............................................................................................. 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR251000444603 Page: 4 of 9 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: 4.5V DC (1.5V x 3 "AA" Size Batteries) Bluetooth Version: V5.0 LE Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Channel Spacing: 2MHz Data Rate: 1Mbps, 2Mbps Number of Channels: 40 Antenna Type: PCB Antenna Antenna Gain: 0dBi Remark:The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR251000444603 Page: 5 of 9 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anec…

Text truncated - open the document above for the full version.

Productspecification QuickReferenceDate Antennamoduleonthesystemboard FrequencRange2400~2500MHz Ant.PortInputPwr.(dBm)0(Typ.BTclass2outputpower) Tot.Rad.Pwr.(dBm)-1.2(Inputpwr–losspwr) PeakEIRP(dBm)0 Directivity(dBi)0 (alldirectionantenna) Efficiency(dB)60.2% Gain(dBi)0(AvgGainXY-plane) MaximumPower(dBm)1(XY-plane) MinimumPower(dBm)-2(XY-plane) Avg.Power(dBm)-1.2(XY-plane) InputImpendence(ohm)50 PolarizationTypeVertical&Horizontal V.S.W.R<2 Allthetechnicaldataandinformationcontainedhereinaresubjecttochangewithoutpriornotice AntennaLayout&moduleonthesystemboard AntennaGain GainTable [email protected] PeakAvg.PeakAvg.PeakAvg. ModuleBoard 0-1.5-0.3-4.6-0.2-3.860.2% RetumLoss TheEnvironmentof An tennaRadiationPattem 3Dradiationpatterndiagram XY-planeXZ-planeYZ-plane

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR251000444602 Page: 1 of 83 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2510004446ET (SGS SZ NO.: T52510350024EM) Applicant: Apitor Technology Co., Ltd. Address of Applicant: 3rd Floor, Building A, Tengmin Technology Park Xixiang, Baoan Shenzhen 518000 China Manufacturer: Apitor Technology Co., Ltd. Address of Manufacturer: 3rd Floor, Building A, Tengmin Technology Park Xixiang, Baoan Shenzhen 518000 China Equipment Under Test (EUT): EUT Name: Robot Wheels Item No.: APR011 Country of Origin: China Country of Destination: US Requested Age Grading: 3+ FCC ID: 2AS4DR01W Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2025-10-15 Date of Test: 2025-10-28 to 2025-11-11 Date of Issue: 2025-11-17 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR251000444602 Page: 2 of 83 Revision Record Version Chapter Date Modifier Remark 01 2025-11-17 Original Authorized for issue by: Martin Tang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR251000444602 Page: 3 of 83 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Conducted Peak Output Power ANSI C63.10 (2020) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2020) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR251000444602 Page: 4 of 83 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Description of Support Units ......................................................................................................... 6 4.3 Measurement Uncertainty ............................................................................................................ 6 4.4 Test Location ............................................................................................................................... 7 4.5 Test Facility .................................................................................................................................. 7 4.6 Deviation from Standards ............................................................................................................. 7 4.7 Abnormalities from Standard Conditions ....................................................................................... 7 5 Equipment List ................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ..........................................................................................10 6.1 Antenna Requirement .................................................................................................................10 6.1.1 Test Requirement: ..................................................................................................................10 6.1.2 Conclusion ..............................................................................................................................10 7 Radio Spectrum Matter Test Results ................................................................................................11 7.1 Radiated Emissions which fall in the restricted bands ..................................................................11 7.1.1 E.U.T. Operation .....................................................................................................................11 7.1.2 Test Mode Description ............................................................................................................11 7.1.3 Test Setup Diagram ................................................................................................................12 7.1.4 Measurement Procedure and Data .........................................................................................13 7.2 Radiated Spurious Emissions Below 1GHz ..................................................................................22 7.2.1 E.U.T. Operation ........................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 1 of 3 Appendix Test Setup Photos for SZCR2510004446ET FCC ID: 2AS4DR01W SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 2 of 3 Test Setup Photo Radiated Emissions which fall in the restricted bands Radiated Spurious Emissions Below 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 3 of 3 Radiated Spurious Emissions Above 1GHz - End of the Appendix -