2AS4KJTS-SEBOOK6Securebook with WiFi

JTS Securebook 6 Quick Start Guide This guide covers operation of the Securebook 6 hardware only. Ports and Connectivity: The Securebook by itself has no I/O ports for content to go on or off of the device. The Securebook connects to a docking station (the Securedock) in order to provide access to USB ports, HDMI, Ethernet, or WiFi (optional), which are included only in the Securedock. 1 2 3 1 2 4 5 4 3 7 6 Left Side View: 1.Kensington Cable Lock 2.Power Input 3.Headphone Jack Right Side View: 4.Kensington Cable Lock (2nd) Top View: 1.Power Key (Press and Hold) 2.Status Light Bottom View: 3.Female Docking Port 4-7.Security Screws BIOS Administration: The Securebook has a number of BIOS options to keep the device secure. By default, a password has been set on BIOS. For most secure deployments, BIOS is accessed with a USB unlock key. Press esc key at American Megatrends boot screen to enter BIOS. Important Note: This guide does not cover the operation of software on the Securebook. The Securebook is compatible with a variety of operating systems, including Windows, Ubuntu Linux, Chrome (via CloudReady), and Endless OS for Corrections. FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason- able protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types Securebook 6 (FCC ID: 2AS4KJTS-SEBOOK6) and Securebook 6DSW ( FCC ID: 2AS4KJTS-SEBOOK6DS) has also been tested against this SAR limit. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in it s assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be Avoided. Pairing with Securedock (Sold Separately): The Securedock is a docking station designed to add USB, HDMI, Ethernet, or WiFi (optional) connectivity ports to your Securebook for short periods of time. This is valuable for manag- ing the device. By putting all of the connectivity ports on a separate piece of hardware (the Securedock), the Securebook cannot be abused by residents who wish to transfer content or access a network while in their living units unsupervised. Any Securebook works with any Securedock. Do not provide access to a Securebook and Securedock simultaneously unless supervised by admin. Securedock: 1.Male Docking Port IMPORTANT: Do not provide access to a Securebook and Securedock simultaneously unless supervised by admin. When provided access to a Securedock, the computer can have unrestricted access to USB and network ports. 1 UL warning Do not use the device in the environment at too high or too low temperature, never expose the device under strong sunshine or too wet environment. The suitable temperature for the product is -20~60. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. The battery shall be prevented to be exposed in effulgence so as not to cause over-heated, distort, smoke and weaken its performance and cycle life. There is a protective circuit inside the battery to prevent contingency. Do not use the battery in the Electro static circumstances, (above 1000V), for it is easily destroyed the circuit board so that the battery doses not work and causes over-heated, distort, smoke or burning. When charging, please place the device in an environment that has a normal room tempera- ture and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 10~40. --Replacement of a battery with an incorrect type that can defeat a safeguard; --Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; --leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; --A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas; --Risk of fire or explosion if the battery is replaced by an incorrect type;

JusticeTechSolutions,LLC UNIIDeclarationLetter WehavedeclaredbelowfeaturedforFCCequipmentauthorization,deviceFCCID:2AS4KJTS- SEBOOK6 (1)DFSDevice--Master,ClientwithRadardetectioncapability, Clientwithoutradardetectioncapability,N/A (2)Active/PassiveScanning,adhocmodeaccesspointcapability FrequencyBand (MHz) ActiveScanning (thedevicecan transmitaprobe (beacon)) passivescanning (wherethedevice is canlistenonly withno probes) AdHocMode capability Accesspoint capability 2412–2462MHzYes,NoYes,NoYes,NoYes,No 2422–2452MHzYes,NoYes,NoYes,NoYes,No 5745–5825MHzYes,NoYes,NoYes,NoYes,No 5755–5795MHzYes,NoYes,NoYes,NoYes,No 5180–5240MHzYes,NoYes,NoYes,NoYes,No 5190–5230MHzYes,NoYes,NoYes,NoYes,No 5260–5320MHzYes,NoYes,NoYes,NoYes,No 5270–5310MHzYes,NoYes,NoYes,NoYes,No 5500–5700MHzYes,NoYes,NoYes,NoYes,No 5510–5670MHzYes,NoYes,NoYes,NoYes,No (3)Countrycodeselectionability-Yes,No Ifno,plsexplainhowwasimplemented:CountryisselectedasUSbydefaultandusercannot changethecountrycode. (4)Meet15.202requirement-Yes,No, plscheckbelow: Amasterdeviceisdefinedasadeviceoperatinginamodeinwhichithasthecapabilityto transmitwithoutreceivinganenablingsignal.Inthismodeitisabletoselectachannelandinitiatea networkbysendingenablingsignalstootherdevices Aclientdeviceisdefinedasadeviceoperatinginamodeinwhichthetransmissionsofthedevice areundercontrolofthemaster.Adeviceinclientmodeisnotabletoinitiateanetwork. N/A (5)Forclientdevicesthathavesoftwareconfigurationcontroltooperateindifferentmodes(active scanninginsomeandpassivescanninginothers)indifferentbands(deviceswithmultipleequipment classesorthosethatoperateonnon-DFSfrequencies)ormodulardeviceswhichconfigurethemodes ofoperationsthroughsoftware,theapplicationmustprovidesoftwareandoperationsdescriptionon howthesoftwareand/orhardwareisimplementedtoensurethatproperoperationsmodescannot bemodifiedbyenduseroraninstaller. Apply,NoApply , (Ifapply,plshelptoprovideexplanationonhowitwasimplement(Byhardwareorsoftware,andhowsoftwarewascontrolled) Thedeviceconfigurationcannotbemodifiedbyuserasprogramisnotexposedtouserbyanymeans.Hardwaredoesnot allowUSBconnectionforuserwhichismusttochangetheconfiguration. Ifyouhaveanyquestions,pleasefeelfreetocontactmeattheaddressshownbelow. Yourssincerely, Signatory Contactname:JeremySchwartz Title:CEO

FCC ID: 2AS4KJTS-SEBOOK6 External Photos 1. EUT front view 2. EUT rear view 3. EUT left side view 4. EUT right side view 5. EUT top view 6. EUT bottom view 7. Accessories

1.Label 2.Label location print on back FCC ID: 2AS4KJTS-SEBOOK6

FCC ID: 2AS4KJTS-SEBOOK6 Internal Photos 1. EUT uncover view 2.Antenna view Main ANT 2.4G/5G WiFi AUX ANT 2.4G/5G WiFi

securebook 6 Tune-up WiFi 2.4G WiFi 802.11b Channel Channel 1 Channel 7 Channel 13 Maximum Target Value (dBm) 16+/-1 16+/-1 16+/-1 WiFi 802.11g Channel Channel 1 Channel 7 Channel 13 Maximum Target Value (dBm) 14+/-1 14+/-1 10+/-1 WiFi 802.11n 20M Channel Channel 1 Channel 7 Channel 13 Maximum Target Value (dBm) 14+/-1 14+/-1 10+/-1 WiFi 802.11n 40M Channel Channel 3 Channel 7 Channel 11 Maximum Target Value (dBm) 11+/-1 14+/-1 9+/-1 WiFi 802.11ax 20M（RU242） Channel Channel 1 Channel 7 Channel 13 Maximum Target Value (dBm) 14+/-1 14+/-1 10+/-1 WiFi 802.11ax 20M（RU26) Channel Channel 1 Channel 7 Channel 13 Maximum Target Value (dBm) 9+/-1 9+/-1 3+/-1 WiFi 802.11ax 20M（RU52) Channel Channel 1 Channel 7 Channel 13 Maximum Target Value (dBm) 11+/-1 11+/-1 3+/-1 WiFi 802.11ax 20M（RU106) Channel Channel 1 Channel 7 Channel 13 Maximum Target Value (dBm) 14+/-1 14+/-1 3+/-1 WiFi 802.11ax 40M Channel Channel 1 Channel 7 Channel 13 Maximum Target Value (dBm) 11+/-1 14+/-1 9+/-1 WiFi 5G WiFi 802.11a Channel Channel 36~64 Channel 100~144 Channel 149~165 Target (dBm) 13.5+/-1 13.5+/-1 13.5+/-1 WiFi 802.11n 20M Channel Channel 36~64 Channel 100~140 Channel 149~165 Target (dBm) 12+/-1 12+/-1 13.5+/-1 WiFi 802.11n 40M Channel Channel 38~62 Channel 102~142 Channel 151~159 Target (dBm) 13.5+/-1 12.5+/-1 15+/-1 WiFi 802.11ac 20M Channel Channel 36~64 Channel 100~140 Channel 149~165 Target (dBm) 12+/-1 12+/-1 13.5+/-1 WiFi 802.11ac 40M Channel Channel 38~62 Channel 102~142 Channel 151~159 Target (dBm) 13.5+/-1 13+/-1 15+/-1 WiFi 802.11ac 80M Channel Channel 42~58 Channel 106~138 Channel 155 Target (dBm) 13.5+/-1 13.5+/-1 15+/-1 WiFi 802.11ac 160M Channel Channel 50 Channel 114 Target (dBm) 12+/-1 13.5+/-1 WiFi 802.11ax 20M (RU242) Channel Channel 36~64 Channel 100~144 Channel 149~165 Target (dBm) 12.5+/-1 12.5+/-1 14+/-1 WiFi 802.11ax 20M (RU26) Channel Channel 36~64 Channel 100~140 Channel 149~165 Target (dBm) 3+/-1 3+/-1 6+/-1 WiFi 802.11ax 20M (RU52) Channel Channel 38~62 Channel 102~142 Channel 151~159 Target (dBm) 6+/-1 6+/-1 9+/-1 WiFi 802.11ax 20M (RU106) Channel Channel 36~64 Channel 100~140 Channel 149~165 Target (dBm) 9+/-1 9+/-1 12+/-1 WiFi 802.11ax 40M Channel Channel 38~62 Channel 102~142 Channel 151~159 Target (dBm) 14+/-1 14+/-1 15.5+/-1 WiFi 802.11ax 80M Channel Channel 42~58 Channel 106~138 Channel 155 Target (dBm) 14+/-1 14+/-1 15+/-1 WiFi 802.11ax 160M Channel Channel 50 Channel 114 Target (dBm) 12+/-1 13.5+/-1

REPORT No.：SZ22090213S01 NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel:86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 42 TEST REPORT APPLICANT : Justice Tech Solutions, LLC PRODUCT NAME : Securebook MODEL NAME : securebook 6 BRAND NAME : Justice Tech Solutions FCC ID : 2AS4KJTS-SEBOOK6 STANDARD(S) : FCC 47 CFR Part 2(2.1093) IEEE 1528-2013 RECEIPT DATE : 2022-10-11 TEST DATE : 2022-10-27 to 2022-11-07 ISSUE DATE : 2022-11-30 Edited by: Xie Yiyun (Rapporteur) Approved by: Shen Junsheng (Supervisor ) REPORT No.：SZ22090213S01 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 42 DIRECTORY 1 SAR Results Summary ........................................................................................ 5 2 Technical Information .......................................................................................... 6 2.1 Applicant and Manufacturer Information ............................................................ 6 2.2 Equipment under Test (EUT) Description ........................................................... 6 2.3 Environment of Test Site ...................................................................................... 7 3 Specific Absorption Rate (SAR) ........................................................................ 8 3.1 Introduction ........................................................................................................... 8 3.2 SAR Definition ....................................................................................................... 8 4 RF Exposure Limits ............................................................................................. 9 4.1 Uncontrolled Environment ................................................................................... 9 4.2 Controlled Environment ....................................................................................... 9 5 Applied Reference Documents ......................................................................... 10 6 SAR Measurement System ............................................................................... 11 6.1 E-Field Probe ....................................................................................................... 12 6.2 Data Acquisition Electronics (DAE) ................................................................... 13 6.3 Robot .................................................................................................................... 13 6.4 Measurement Server ........................................................................................... 13 6.5 Light Beam Unit ................................................................................................... 14 6.6 Phantom ............................................................................................................... 14 6.7 Device Holder ...................................................................................................... 15 6.8 Data storage and Evaluation .............................................................................. 16 6.9 Test Equipment List ............................................................................................ 18 7 Tissue Simulating Liquids ................................................................................ 20 8 SAR System Verification ................................................................................... 22 9 EUT Testing Position ........................................................................................ 25 REPORT No.：SZ22090213S01 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 42 10 Measurement Procedures.................................................................................. 26 10.1 Spatial Peak SAR Evaluation ............................................................................. 27 10.2 Power Reference Measurement ......................................................................... 27 10.3 Area Scan Procedures ........................................................................................ 27 10.4 Zoom Scan Procedures ...................................................................................... 28 10.5 SAR Averaged Methods ..................................................................................... 28 10.6 Power Drift Monitoring ....................................................................................... 28 11 SAR Test Configuration .................................................................................... 29 12 Conducted Output Power ................................................................................. 33 13 Exposure Positions Consideration .................................................................. 33 13.1 EUT Antenna Locations ...................................................................................... 33 13.2 Test Positions Consideration ............................................................................. 34 14 SAR T…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22090213S01 Annex C Plots of System Performance Check Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.10.27 System Check_2450MHz_Head Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450 Medium parameters used: f = 2450 MHz; σ = 1.864 S/m; ε r = 39.566; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.42, 7.42, 7.42) @ 2450 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW2450/Area Scan (71x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 21.4 W/kg CW2450/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 92.80 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 27.9 W/kg SAR(1 g) = 12.84 W/kg; SAR(10 g) = 5.74 W/kg Maximum value of SAR (measured) = 20.6 W/kg 0 dB = 20.6 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.01 System Check_5250MHz_Head Communication System: UID 0, CW (0); Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: HSL_5250 Medium parameters used: f = 5250 MHz; σ = 4.671 S/m; ε r = 36.192; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(5.16, 5.16, 5.16) @ 5250 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW5250/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 18.8 W/kg CW5250/Zoom Scan (7x7x13)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 41.64 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 33.7 W/kg SAR(1 g) = 7.41 W/kg; SAR(10 g) = 2.22 W/kg Maximum value of SAR (measured) = 16.3 W/kg 0 dB = 16.3 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.04 System Check_5600MHz_Head Communication System: UID 0, CW (0); Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: HSL_5600 Medium parameters used: f = 5600 MHz; σ = 5.132 S/m; ε r = 35.441; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(4.74, 4.74, 4.74) @ 5600 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW5600/Area Scan (101x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 15.6 W/kg CW5600/Zoom Scan (7x7x13)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 40.55 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 31.0 W/kg SAR(1 g) = 7.59 W/kg; SAR(10 g) = 2.31 W/kg Maximum value of SAR (measured) = 15.6 W/kg 0 dB = 15.6 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.07 System Check_5750MHz_Head Communication System: UID 0, CW (0); Frequency: 5800 MHz;Duty Cycle: 1:1 Medium: HSL_5750 Medium parameters used: f = 5800 MHz; σ = 5.333 S/m; ε r = 36.147; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(4.45, 4.45, 4.45) @ 5800 MHz; Calibrated: 2022.03.04 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW5750/Area Scan (101x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 20.5 W/kg CW5750/Zoom Scan (7x7x13)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 39.78 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 48.6 W/kg SAR(1 g) = 7.81 W/kg; SAR(10 g) = 2.31 W/kg Maximum value of SAR (measured) = 21.0 W/kg 0 dB = 21.0 W/kg

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22090213S01 Annex D Plots of Maximum SAR Test Results Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.10.27 WLAN 2.4GHz_802.11b 1Mbps_Bottom Surface 0mm_Ch7 Communication System: UID 0, WLAN 2.4GHz 802.11b (0); Frequency: 2442 MHz;Duty Cycle: 1:1.006 Medium: HSL_2450 Medium parameters used (interpolated): f = 2442 MHz; σ = 1.808 S/m; ε r = 38.829; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.28, 7.28, 7.28) @ 2442 MHz; Calibrated: 2021.01.22 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch7/Area Scan (111x151x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.428 W/kg Ch7/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.912 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.539 W/kg SAR(1 g) = 0.311 W/kg; SAR(10 g) = 0.170 W/kg Maximum value of SAR (measured) = 0.366 W/kg 0 dB = 0.366 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.01 WLAN 5.2GHz_802.11ax-HEW20 MCS 0_Bottom Surface 0mm_Ch44 Communication System: UID 0, WLAN 5GHz (0); Frequency: 5220 MHz;Duty Cycle: 1:1.176 Medium: HSL_5250 Medium parameters used: f = 5220 MHz; σ = 4.667 S/m; ε r = 36.107; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(5.16, 5.16, 5.16) @ 5220 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch44/Area Scan (121x141x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.834 W/kg Ch44/Zoom Scan (8x8x15)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 10.11 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 0.952 W/kg SAR(1 g) = 0.666 W/kg; SAR(10 g) = 0.559 W/kg Maximum value of SAR (measured) = 0.815 W/kg 0 dB = 0.834 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.01 WLAN 5.3GHz_802.11ax-HEW20 MCS 0_Bottom Surface 0mm_Ch64 Communication System: UID 0, WLAN 5GHz (0); Frequency: 5320 MHz;Duty Cycle: 1:1.176 Medium: HSL_5250 Medium parameters used: f = 5320 MHz; σ = 4.787 S/m; ε r = 35.947; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(5.16, 5.16, 5.16) @ 5320 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch64/Area Scan (141x141x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.828 W/kg Ch64/Zoom Scan (8x8x15)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 9.901 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 0.979 W/kg SAR(1 g) = 0.691 W/kg; SAR(10 g) = 0.581 W/kg Maximum value of SAR (measured) = 0.811 W/kg 0 dB = 0.828 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.04 WLAN 5.5GHz_802.11ax-HEW20 MCS 0_Bottom Surface 0mm_Ch144_A Communication System: UID 0, WLAN 5GHz (0); Frequency: 5720 MHz;Duty Cycle: 1:1.176 Medium: HSL_5750 Medium parameters used: f = 5720 MHz; σ = 5.266 S/m; ε r = 35.22; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.42, 7.42, 7.42) @ 5720 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch144/Area Scan (141x181x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.932 W/kg Ch144/Zoom Scan (8x8x15)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 9.273 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 1.17 W/kg SAR(1 g) = 0.718 W/kg; SAR(10 g) = 0.571 W/kg Maximum value of SAR (measured) = 0.900 W/kg 0 dB = 0.932 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.07 WLAN 5.8GHz_802.11ax-HEW20 MCS 0_Bottom Surface 0mm_Ch157 Communication System: UID 0, WLAN 5GHz (0); Frequency: 5785 MHz;Duty Cycle: 1:1.176 Medium: HSL_5750 Medium parameters used: f = 5785 MHz; σ = 5.333 S/m; ε r = 35.097; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(4.61, 4.61, 4.61) @ 5785 MHz; Calibrated: 2022.03.04 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch157/Area Scan (141x181x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 1.02 W/kg Ch157/Zoom Scan (8x8x15)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 8.751 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = 0.778 W/kg; SAR(10 g) = 0.624 W/kg Maximum value of SAR (…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22090213S01 Annex E Conducted Power Note: Conducted power unit: dBm The target power was recorded in the manufacture document. 2.4GHz WLAN ANT 12.4GHz WLAN ANT 22.4GHz WLAN ANT 1+2 CH 1241215.6916.50defaultCH 1241215.6716.50defaultCH 12412N/AN/AN/A CH 7244215.9416.50defaultCH 7243715.8316.50defaultCH 72437N/AN/AN/A CH 13247215.8016.50defaultCH 13246215.6116.00defaultCH 132462N/AN/AN/A CH 1241214.0014.50defaultCH 1241213.9514.50defaultCH 12412N/AN/AN/A CH 7244214.3615.00defaultCH 7243714.3515.00defaultCH 72437N/AN/AN/A CH 13247210.1611.00defaultCH 1324629.3810.00defaultCH 132462N/AN/AN/A CH 1241214.0014.50defaultCH 1241213.9914.50defaultCH 1241218.0618.50default CH 7244214.3515.00defaultCH 7243714.3015.00defaultCH 7243718.3919.00default CH 13247210.1011.50defaultCH 1324629.6510.00defaultCH 13246213.9814.50default CH 3242211.0012.50defaultCH 3242211.0711.50defaultCH 3242215.0515.50default CH 7244214.0114.50defaultCH 7243714.0814.50defaultCH 7243718.0618.50default CH 1124628.829.50defaultCH 1124528.419.00defaultCH 11245212.5513.00default CH 1241213.9014.50defaultCH 1241214.1115.00defaultCH 1241217.7118.50default CH 7244214.3515.00defaultCH 7243714.3815.00defaultCH 7243718.0618.50default CH 13247210.0110.50defaultCH 1324629.7610.50defaultCH 13246213.6214.50default CH 124128.529.00defaultCH 124128.949.50defaultCH 1241212.3013.00default CH 724428.809.50defaultCH 724378.849.50defaultCH 7243712.3013.00default CH 1324723.154.00defaultCH 1324623.033.50defaultCH 1324626.997.50default CH 1241210.9511.50defaultCH 1241210.8611.50defaultCH 1241214.7715.50default CH 7244211.0611.50defaultCH 7243710.9411.50defaultCH 7243714.9115.50default CH 1324722.703.50defaultCH 1324622.713.50defaultCH 1324626.997.50default CH 1241213.9514.50defaultCH 1241214.0114.50defaultCH 1241217.8518.50default CH 7244214.1815.00defaultCH 7243714.2215.00defaultCH 7243718.0618.50default CH 1324722.743.50defaultCH 1324622.633.50defaultCH 1324626.997.50default CH 3242211.3012.00defaultCH 3242210.6511.50defaultCH 3242215.0515.50default CH 7244214.3515.00defaultCH 7243713.7414.50defaultCH 7243718.1319.00default CH 1124629.2410.00defaultCH 1124528.…

Text truncated - open the document above for the full version.