
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
© Innergie 2026. All rights reserved. Marks, logos and trademarks other than Innergie and DELTA are the properties of their respective owners, the uses thereof are for identification purposes only and without endorsement. All specifications are subject to change without prior notice. Made in China . Product Name: AMP Lite Wireless Battery Pack Model: ING-AML05KS1 Manufactured for: Delta Electronics Inc. Rated Capacity Input DC Voltage/Current 2800mAh(5V), 1100mAh(9V), 850mAh(12V) USB-C: 5V⎓3A, 9V⎓2A, 12V⎓1.5A USB-C: 5V⎓2.4A, 9V⎓2.22A, 12V⎓1.67A (PD 20W Max) Wireless: 15W(Max) Total: 5V⎓3A (15W Max, Simultaneous Use) Output DC Voltage/Current English A MP 5000 Lite 5000mAh Magnetic Battery Pack Wireless Charging Area Power Button Type-C In/Out Port LED Indicator Safety and Warning Instructions The following safety guidelines are designed to ensure safety and optimal performance of your Innergie product, to ensure reliable operation: • Please strictly follow all operating instructions and warnings. • Carefully read all instructions in the user manual before operating the product. • Do not disassemble the device; there are no user-serviceable parts inside, and disassembly will void the warranty. • Do not use this product in damp environments or under wet conditions. • Do not use the product near high-temperature heat sources, exhaust outlets, or under direct sunlight for prolonged periods. The product should be used in environments with a temperature range of 5°C - 35°C (41°F - 95°F). • Do not cover the product with paper or other materials, as this may obstruct its cooling function. • Warning: Improper handling of the battery in this device may cause fire or chemical burns. • Do not disassemble, heat, or incinerate. Dispose of used batteries promptly and keep out of reach of children. Do not disassemble, and never throw into fire. • When not in use, charge the power bank once every three months to keep the battery active and ensure a longer battery life. • CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above (manufacturer's specified maximum temperature), or Incinerate. Follow Manufacturer's Instructions. Warranty and Limitations : We guarantee that this product is free from material and workmanship defects under normal use conditions for one year from the date of purchase. During the warranty period, defective products may be returned for repair or replacement. The warranty does not cover accidental damage, normal wear and tear, incidental losses, or usage beyond the operating instructions in the user manual. To the maximum extent permitted by law, Innergie's liability is limited to the replacement of the defective product. Charging cables are consumable items and are not covered under warranty. “Certified low-power radio-frequency equipment must not have its frequency, power, or original design features and functions modified without approval from the company, business, or user. The use of low- power radio-frequency equipment must not compromise flight safety or interfere with lawful communications. If interference is detected, the equipment should be immediately stopped and may only resume use once the interference is resolved. Lawful communications refer to radio communications operating in compliance with telecommunications regulations. Low-power radio-frequency equipment must tolerate interference from lawful communications or equipment for industrial, scientific, and medical purposes." This product does not support laptop charging. Do not use it to charge a laptop. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Report No: DSP26061384-1 FCC ID: 2AS5S-ING-AML05KS1 Annex of Test Report Annex A. EUT External Photos Model: ING-AML05KS1 EUT View 1 EUT View 2 Report No: DSP26061384-1 FCC ID: 2AS5S-ING-AML05KS1 Annex of Test Report EUT View 3 EUT View 4 Report No: DSP26061384-1 FCC ID: 2AS5S-ING-AML05KS1 Annex of Test Report EUT View 5 EUT View 6 Report No: DSP26061384-1 FCC ID: 2AS5S-ING-AML05KS1 Annex of Test Report EUT View 7
Report No: DSP26061384-1 FCC ID: 2AS5S-ING-AML05KS1 Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Labe Size: 14.5mm x 1.2mm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location
Report No: DSP26061384-1 FCC ID: 2AS5S-ING-AML05KS1 Annex of Test Report Annex B. EUT Internal Photos EUT View 1 EUT View 2 Coil ANT Report No: DSP26061384-1 FCC ID: 2AS5S-ING-AML05KS1 Annex of Test Report EUT View 3 EUT View 4 Report No: DSP26061384-1 FCC ID: 2AS5S-ING-AML05KS1 Annex of Test Report EUT View 5 EUT View 6
Report No: DSP26061384-2 MPE Test Report Page 1 of 12 MPE Test Report FCC ID: 2AS5S-ING-AML05KS1 Report No. : DSP26061384-2 Applicant : Delta Electronics, Inc. Product Name : AMP Lite Wireless Battery Pack Model Name : ING-AML05KS1 Test Standard : FCC CFR 47 PART 1, 1.1310 Date of Issue : 2026-08-28 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.zrlklab.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: DSP26061384-2 MPE Test Report Page 2 of 12 Test Report Basic Information Applicant..................................: Delta Electronics, Inc. Address of Applicant...............: 3, Tungyuan Road Chungli Industrial Zone Taoyuan County 32063, Taoyuan, Taiwan Manufacturer..........................: Delta Electronics, Inc. Address of Manufacturer........: 3, Tungyuan Road Chungli Industrial Zone Taoyuan County 32063, Taoyuan, Taiwan Product Name.........................: AMP Lite Wireless Battery Pack Brand Name.............................: INNERGIE Main Model..............................: ING-AML05KS1 Series Models..........................: - Test Standard..........................: FCC CFR 47 PART 1, 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Test .............................: 2026-08-12 to 2026-08-20 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: DSP26061384-2 MPE Test Report Page 3 of 12 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Test Facilities ........................................................................................................................................................7 1.4 List of Measurement Instruments ..........................................................................................................................7 1.5 Measurement Uncertainty .....................................................................................................................................7 2. RF Exposure .................................................................................................................................................................8 2.1 Standard and Limit................................................................................................................................................8 2.2 Test Procedures ....................................................................................................................................................8 2.3 Test Setup Block Diagram ......................................................................................................................................9 2.4 Test Data and Results .......................................................................................................................................... 10 Annex A. Test Photos ..................................................................................................................................................... 12 Report No: DSP26061384-2 MPE Test Report Page 4 of 12 Revision History Revision Issue Date Description Revised By V1.0 2026-08-28 Initial Release Lahm Peng Report No: DSP26061384-2 MPE Test Report Page 5 of 12 1. General Information 1.1 Product Information Product Name: AMP Lite Wireless Battery Pack Trade Name: INNERGIE Test Model: ING-AML05KS1 Series Models: - Rated Voltage: DC 3.85V by battery USB-C Input: 5V⎓3A, 9V⎓2A, 12V⎓1.5A USB-C Output: 5V⎓2.4A, 9V⎓2.22A, 12V⎓1.67A Total Output: 5V⎓3A Wireless Output: 5W, 7.5W, 10W, 15W(Max) Power Adapter: N/A Battery: DC 3.85V, 5000mAh Test Sample No: DSP26061384-1 Hardware Version: V1.0 Software Version: V1.0 Note 1: The test data is gathered from a production sample, provided by the manufacturer. Wireless Specification Wireless Standard: WPC (QI) Operating Frequency: 110.5~205kHz: 5W, 7.5W, 10W, 15W(Max) Modulation: ASK Antenna Gain: 0dBi Type of Antenna: Integral Antenna Type of Device: Portable Device Mobile Device Modular Device Report No: DSP26061384-2 MPE Test Report Page 6 of 12 1.2 Test Setup Information List of Test Modes Test Mode Description Remark TM1 Wireless Charging Wireless Charging 15W TM2 Wireless Charging Wireless Charging 10W TM3 Wireless Charging Wireless Charging 7.5W TM4 Wireless Charging Wireless Charging 5W TM5 Adapter Charging + Wireless Charging Wireless Charging 5W Note: All modes of the main model and accessory models mentioned above have been tested. The report only shows the worst modes of the main model: TM1 data. List and Details of Auxiliary Cable Description Length (cm) Shielded/Unshielded With/Without Ferrite USB 100 Unshielded Without Ferrite - - - - List and Details of Auxiliary Equipment Equipment Model Serial No. Manufacturer Adapter UGREEN CD289 - Mobile phone iPhone 16 HYG6PQMWK Apple Report No: DSP26061384-2 MPE Test Report Page 7 of 12 1.3 Test Facilities Laboratory Name: Shenzh…
Text truncated - open the document above for the full version.
JIEYUE ELECTRONIC COMPANY LTD. SPECIFICATION FOR APPROVAL CUSTOMER: CUSTOMER P/N: OUR DWG No: 303030 -00069 QUANTITY: 30 Pcs. DATE:2026/4/11 ITEM: SF043-8R1-11TS A/1 SPECIFICATION ACCEPTED BY: COMPONENT ENGINEER ELECTRICAL ENGINEER MECHANICAL ENGINEER APPROVED REJECTED DRAWN Wang Xiaorong CHECKED Liu Jiahao APPROVED Zhu Long BYBYBY 杰越电子有限公司 JIEYUE ELECTRONIC COMPANY LTD. DIAOLANG ,HUAG JIANG TOWN, DONG GUANG CITY, GUANG DONG,CHINA. TEL :13642845578 FAX:86-769-83366888 E-mail: [email protected] 司 公 限 有 子 电 越 杰 市 莞 东 REVISION COREST CUSTOMER:PART NO : 303030-00070 DESCRIPTION:SF043-8R1-11TSDATE: 2026/4/11 DOC NO.REV.CONTENT DCSRIPTIONMADE BYCHECKED BY 2026/4/11A/0 New edition release Liu Jiahao Zhu Long JIEYUE ELECTRONIC COMPANY LTD. 司 公 限 有 子 电 越 杰 市 莞 东 SPECIFICATION FOR APPROVAL CUSTOMERPART NO303030-00070PAGE1/6 DATE2026/4/11DESCRIPTION SF043-8R1-11TS TYPE ABCDEFGH 20±1.020.5±1.039±1.042.5±1.52±17±20.6±0.11.5±0.1 DRAWN BYCHECKED BYAPPROVED BYISSUE NO. DRAW NO.A/0 TYPE 司 公 限 有 子 电 越 杰 市 莞 东 45±2 Wang Xiaorong Liu Jiahao Zhu Long unit: mm SPECIFICATION FOR APPROVAL CUSTOMERPART NO 303030-00070 PAGE 3/6 DATE2026/4/11 DESCRIPTION SF043-8R1-1 1TS TAPE 5.ELECTRICAL CHARACTERISTIC:(電器特性) TEST CONDITION:TEMPERATURE AT 25°C HUMIDITY AT 65±5%RH TEST ITEM (測試項目) TEST CONDITION (測試條件) RESULT (條件范圍值) INDUCTANCE (電感) 測試儀器: CH3250 @100KHz,1.0V PIN(1-2) 8.1uH ±10% Q (品质因数) 測試儀器: CH3250 @100KHz,1.0V PIN(1-2) 40 MIN DCR (直流电阻) PIN(1-2)105 mΩ DRAWN BYCHECKED BYAPPROVED BYISSUE NO. DRAW NO.A/0 TYPE 司 公 限 有 子 电 越 杰 市 莞 东 Wang Xiaorong Liu Jiahao Zhu Long SPECIFICATION FOR APPROVAL CUSTOMER 海陆通 PART NO 303030-00070 PAGE DATE2026/4/11 DESCRIPTION SF043-8R1-11TS TAPE 2.SCHEMATIC:(線路圖)3.WINDING:(剖面圖) 4.WINDING TABLE:(繞線結構) Winding No (組別) PIN (腳位) Wire&Wire Copper (線徑*股數) Tuns (圈數) TUBE Windimg Tape (繞線方式) Mylar Tape (膠帶層次) N11-2 2UEW 0.08∮*24C*2P 11Ts close winding 5 mm*1L DRAWN BYCHECKED BYAPPROVED BY ISSUE NO. DRAW NO.A/0 TYPE 2/6 司 公 限 有 子 电 越 杰 市 莞 东 Wang Xiaorong Liu Jiahao Zhu Long SPECIFICATION FOR APPROVAL CUSTOMER PART NO 303030-00070 PAGE4/7 DATE 2026/4/11 DESCRIPTION SF043-8R1 -11TS PART NO 6.MATERIAL LIST: NAMEMATERIALSUPPLIER OR MANUFACTURER UL FILE NO Insolation System CLASS B (130) JIE YUE ELECTRONIC CO LTD CORE G42.5*5.3*0.6H±0.1 TAK ENTERPRISE CO.,LTD WIRE UEW/U@ PACIFIC ELECTRIC WIRE & CABLE (SHENZHEN) CO LTD TAPE CT -280B JINGJIANG YAHUA PRESSURE SENSITIVE GLUE CO LTD E165111 VARNISH BC -346AJOHN C DOLPH CO E317427 FLUX XD-601 SHENZHEN EASTLIGHT CHEMICAL MATERIAL CO.,LTD SOLDER Sn-Cu4.3 DONGGUAN CITY YUE CHENG TIN CO.,LTD DRAWN BY CHECKED BYAPPROVED BY ISSUE NO. Wang Xiaorong Liu Jiahao Zhu Long DRAW NO.A/0 TYPE 认证,物质安全表\UL认证\亚华E165111.pdf nistrator\桌面\E317427.pdf 司 公 限 有 子 电 越 杰 市 莞 东
Report No: DSP26061384-1 FCC Test Report Page 1 of 25 FCC TEST REPORT FCC ID: 2AS5S-ING-AML05KS1 Report No. : DSP26061384-1 Applicant : Delta Electronics, Inc. Product Name : AMP Lite Wireless Battery Pack Model Name : ING-AML05KS1 Test Standard : FCC Part 15 Subpart C Date of Issue : 2026-08-28 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.zrlklab.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: DSP26061384-1 FCC Test Report Page 2 of 25 Test Report Basic Information Applicant..................................: Delta Electronics, Inc. Address of Applicant...............: 3, Tungyuan Road Chungli Industrial Zone Taoyuan County 32063, Taoyuan, Taiwan Manufacturer..........................: Delta Electronics, Inc. Address of Manufacturer........: 3, Tungyuan Road Chungli Industrial Zone Taoyuan County 32063, Taoyuan, Taiwan Product Name.........................: AMP Lite Wireless Battery Pack Brand Name.............................: INNERGIE Main Model..............................: ING-AML05KS1 Series Models..........................: - Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 Date of Test .............................: 2026-08-12 to 2026-08-20 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: DSP26061384-1 FCC Test Report Page 3 of 25 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................8 2. Summary of Test Results .............................................................................................................................................9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .......................................................................................................................................................... 10 4. Conducted Emissions ................................................................................................................................................ 11 4.1 Standard and Limit.............................................................................................................................................. 11 4.2 Test Procedure.................................................................................................................................................... 11 4.3 Test Data and Results .......................................................................................................................................... 12 5. Radiated Emissions ................................................................................................................................................... 15 5.1 Standard and Limit.............................................................................................................................................. 15 5.2 Test Procedure.................................................................................................................................................... 15 5.3 Test Data and Results .......................................................................................................................................... 17 6. Occupied Bandwidth ................................................................................................................................................. 24 6.1 Standard and Limit.............................................................................................................................................. 24 6.2 Test Procedure.................................................................................................................................................... 24 6.3 Test Data and Results .......................................................................................................................................... 24 Report…
Text truncated - open the document above for the full version.
Report No: DSP26061384-1 FCC ID: 2AS5S-ING-AML05KS1 Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View 1 Report No: DSP26061384-1 FCC ID: 2AS5S-ING-AML05KS1 Annex of Test Report Radiated Emission Test View 2 Radiated Emission Test View 3 Report No: DSP26061384-1 FCC ID: 2AS5S-ING-AML05KS1 Annex of Test Report Radiated Emission Test View 4
350 NORTHERN BLVD STE 324-1331 · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 0.1105 MHz - 0.205 MHz | - |

AMP Lite Wireless Battery Pack
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz