2AS8PAIDIOSM1C2.4GHz Wireless Monitoring System

U S E R M A N U A L v1.31 1. Safety instructions and warnings .............................1 2. Overview 2.1. Inside the box .........................................................2 2.2. Specification ......................................................2-3 2.3. Product overview .........................................................4 3. Getting started 3.1. Charging and powering monitor unit .................................5 3.2. Powering camera unit ...................................................6 4. Operation – General mode 4.1. OSD icons .....................................................................7 4.2. Control keys ...............................................................8 5. Operation – Menu mode 5.1. Video category ............................................................9 5.2. Audio category ..........................................................10 5.2.1. Auto mute ............................................................10 5.2.2. VOX .....................................................................11 5.3. Camera category .......................................................11 5.3.1. Add a camera unit ...................................................12 5.3.2. Auto scan .............................................................12 5.3.3. Picture in picture (PiP) ..............................................13 6. Troubleshooting and tips ...................................14-16 7. Warranty information ...........................................17 8. FCC statement ...................................................18 9. Declaration of conformity / Others ........................19 1 Please read and follow all instructions and warnings in this user manual before using the product. ◼ Strangulation Hazard - Keep the adapter cord out of the reach of children. Never place the camera or cord within 3 feet of a crib or playpen. ◼ Choking Hazard - This product contains small parts which may cause choking. Not for children under 3 years. ◼ Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instructions. ◼ Use ONLY the power adapters and battery supplied with this product. Using other 3rd parties power adapter or battery may cause fatal damage to the product. ◼ Protect the adapter cord. Route cord so that they are not walked on or pinched by items or against them. ◼ Keep all components away from water or heat source such as a sink, bath tub, laundry tub, fire place or stove. ◼ Provide proper ventilation for both monitor and camera unit. Do NOT cover them with any material, such as a blanket or cloth. ◼ Disconnect all A/C adapters before cleaning. Do NOT immense in water. Clean it only with a dry cloth. ◼ Do NOT attempt to open the devices or accessories. No user serviceable part inside. Risk of electrical shock, fire or death. ◼ This product is NOT a substitute for direct supervision of your baby. Check your baby's activities at regular intervals. ◼ This product is not a toy. Do NOT allow children to play with it. 2 2.1. Inside the box Thanks for purchasing aidios M1 wireless monitoring system. It contains below components : Monitor unit x 1 Camera unit x 1 Rechargeable Lithium battery x 1 A/C adapters x 2 Wall mounting screw x 1 Adhesive rubber foot (for camera stand) x 4 User manual x 1 2.2. Specification RF frequency 2400 – 2483.5 MHz Type of modulation GFSK Type of spread spectrum FHSS Data rate 4 Mbps Channel width 4 MHz Transmission range >1000 feet (LOS) 3 Monitor unit Display 4.3” color TFT LCD, 480x272 Audio Built-in speaker and microphone Battery 1800mAh rechargeable Lithium-ion polymer Duration (Normal) ~9 hours Duration (VOX on) ~15 hours Operating voltage 5V Camera unit Picture sensor 1/5” Color CMOS, 640x480 Optical lens F2.4, EFL 3.7mm, FOV 70∘ Night vision 8 x 940nm IR LEDs Light sensor Built-in Audio Built-in speaker and microphone Operating voltage 5V A/C adapter Battery Mfg. Dongguan Guanjin Electronics Technology Co., Ltd. True Power Technology Co., Limited. Model # K05B050100 series 505068 (1ICP5/51/68) Spec. Input 100-240V AC 50/60 Hz Output 5.0V DC 1.0A 3.7V 1800mAh 6.66Wh 4 2.3. Product Overview 5 3.1. Charging and powering monitor unit Loosen the screw and open battery door. Plug in the battery to the battery socket as shown in pic. 1. Close the battery door and tighten the screw. Plug the power adapter into an electrical outlet. Insert the 3.5mm plug to the power jack as shown in pic. 2. The charging process starts and charge LED indicator emits red light. Press and hold the power button for 1 second to turn on the monitor unit. Power LED indicator emits blue light when monitor unit is turned on. 6 3.2. Powering camera unit Plug the power adapter into an electrical outlet. Insert the 3.5mm plug to the power jack as shown in pic. 3. Slide the power switch to 'ON' position to turn on the camera unit. Power LED indicator emits blue light when camera unit is turned on. NOTE : - Do not injest battery, Chemical Burn Hazard. - This product contains a Lithium cell battery. If the battery is swallowed, it can cause severe internal burns in short period and can lead to death. - Keep new and used batteries away from children. - If the battery compartment does not close securely, stop using the product and keep away from children. - If you think battery might have been swallowed and placed inside any part of body, seek immediate medical attention. 7 4.1. OSD icons Camera icons : Standard camera unit Camera unit at zoom mode Camera unit with pan tilt docking installed (*) Temperature reading icon will be displayed only when pan tilt docking is installed. 8 4.2. Control keys Power button Press and hold : Power on/off Short press : Video off mode (audio only) (*) Pan-tilt mode is only available when pan-tilt docking is installed. 9 To enter menu mode, press ‘Enter’ key once. To leave menu mode, press ‘Exit’ key once. In menu mode, press arrow keys to navigate and select different optio…

Text truncated - open the document above for the full version.

aidios Limited Tel. : (852) 2797 8802 D41, 14/F, Block D, Wah Lok Center, 31-35 Shan Mei Street, Fax. : (852) 2797 3012 Fo Tan, Shatin, Hong Kong. Email : [email protected] Declaration letter for multiple models We, aidios Limited, address at D41, 14/F., Blk D, Wah Lok Center, 31-35 Shan Mei Street, FoTan, Shatin, N.T., Hong Kong, declare that the following product(s): Product Description: 2.4GHz Wireless Monitoring System Model No.: M1 (included M1M Monitor Unit, M1C Camera Unit and M1P Pantilt Unit) and series M1-#, Individual Monitor M1M and series M1M-#, Individual Camera Unit and series M1C-#, and Individual Pantilt Unit and series M1P-# Utilize the identical circuit design, PCB layout, shielding and interface with above Listed Models, only the cosmetic is different. Therefore this application can be regarded as identical in performance to the submitted test sample. M1-#, M1M-#,M1C-#, & M1P-# (“#” can be A-Z such “P” as Pink etc, denoting for cosmetic color & different packaging) Suffix Code Color Suffix Code Color B Blue O Orange C Champagne P Pink E Grey R Red G Green S Silver M Metallic V Violet Y Yellow The Manufacturer would take all responsibilities for the above product(s). For and on behalf of Hong Kong Authorized Person Location Name: Joanne Wong Position: Business Director Date: 21 Aug 2020

aidios Limited Tel. : (852) 2797 8802 D41, 14/F, Block D, Wah Lok Center, 31-35 Shan Mei Street, Fax. : (852) 2797 3012 Fo Tan, Shatin, Hong Kong. Email : [email protected] Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020/8/21 To Whom It May Concern: FCC Application for (FCC ID: 2AS8PAIDIOSM1C) We, the undersigned, hereby authorize Alisa Feng from Shenzhen Huaxia Testing Technology Co., Ltd at 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen Huaxia Testing Technology Co., Ltd on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Thanks for your kind attention. Yours Faithfully, Joanne Wong Business Director

aidios Limited Tel. : (852) 2797 8802 D41, 14/F, Block D, Wah Lok Center, 31-35 Shan Mei Street, Fax. : (852) 2797 3012 Fo Tan, Shatin, Hong Kong. Email : [email protected] Federal Communications Commission Authorization and Evaluation Division Date : 21 Aug 2020 Confidentiality Request regarding application for certification of FCC ID: 2AS8PAIDIOSM1C Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name 1. Block Diagram, 2. Schematics, 3. Operational Description 4. Tune-up procedure 1. 2AS8PAIDIOSM1C -Block diagram 2. 2AS8PAIDIOSM1C -SCH 3. 2AS8PAIDIOSM1C -Operational description 4. 2AS8PAIDIOSM1C -Tune-up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for an initial period of 180 days: Exhibit Type File Name External photos 2AS8PAIDIOSM1C -External photos.pdf Internal photos 2AS8PAIDIOSM1C -Internal photos.pdf Setup photos 2AS8PAIDIOSM1C -Setup photos.pdf User manual 2AS8PAIDIOSM1C -User manual.pdf Thanks for your kind attention. Yours Faithfully, Joanne Wong

FCC ID: 2AS8PAIDIOSM1C ANT

FCC ID: 2AS8PAIDIOSM1C FCC ID: 2AS8PAIDIOSM1C FCC ID: 2AS8PAIDIOSM1C FCC ID: 2AS8PAIDIOSM1C FCC ID: 2AS8PAIDIOSM1C

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 RF Exposure Evaluation Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No.: CQASZ20200800831E-02 Applicant: Aidios Limited. Address of Applicant: D41, 14/F., Blk D, Wah Lok Center, 31-35 Shan Mei St., FoTan, Shatin, N.T., HongKong Equipment Under Test (EUT): EUT Name: 2.4GHz Wireless Monitoring System Model No.: M1C and the series Test Model No.: M1C Brand Name: aidios FCC ID: 2AS8PAIDIOSM1C Standards: 47 CFR Part 1.1307 47 CFR Part 1.1310 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2020-08-12 Date of Test: 2020-08-12 to 2020-12-03 Date of Issue: 2020-12-03 Test Result: PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： ( Jun Li ) Reviewed By: (Sheek Luo) Approved By: ( Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800831E-02 Page:2 of 6 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200800831E-02 Rev.01 Initial report 2020-12-03 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800831E-02 Page:3 of 6 2 Contents Page 1 VERSION .....................................................................................................................................................................2 2 CONTENTS .................................................................................................................................................................3 3 GENERAL INFORMATION .......................................................................................................................................4 3.1 CLIENT INFORMATION ................................................................................................................................................4 3.2 GENERAL DESCRIPTION OF EUT ................................................................................................................................4 4 RF EXPOSURE EVALUATION ................................................................................................................................5 4.1 RF EXPOSURE COMPLIANCE REQUIREMENT ..............................................................................................................5 4.1.1 Limits ..............................................................................................................................................................5 4.1.2 Test Procedure ..............................................................................................................................................5 4.2 1.1.3 EUT RF EXPOSURE EVALUATION ....................................................................................................................6 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800831E-02 Page:4 of 6 3 General Information 3.1 Client Information Applicant: Aidios Limited. Address of Applicant: D41, 14/F., Blk D, Wah Lok Center, 31-35 Shan Mei St., FoTan, Shatin, N.T., HongKong Manufacturer: Aidios Limited. Address of Manufacturer: D41, 14/F., Blk D, Wah Lok Center, 31-35 Shan Mei St., FoTan, Shatin, N.T., HongKong Factory: Exvision Industries Ltd, Factory of Manufacturer: 3/F., No. 65 Longyan 6 th Road, Humen, Dongguan, China, ZIP 523925 3.2 General Description of EUT Product Name: 2.4GHz Wireless Monitoring System Model No.: M1C and the series Test Model No.: M1C Trade Mark: aidios Hardware Version: M1C : V9, Pan-tilt docking (Model M1P) : V6 Software Version: V1.0 Operation Frequency: 2406-2475MHz Modulation Technique: Frequency Hopping Spread Spectrum(FHSS) Modulation Type: FSK/GFSK Transfer Rate: 4Mbps Number of Channel: 24 Hopping Channel Type: Adaptive Frequency Hopping systems Product Type: Mobile Portable Fix Location Test Software of EUT: RF Test (manufacturer declare ) Antenna Type: Dipole Antenna Antenna Gain: 2 dBi Power Supply: DC5.0V by adapter Adapter: Model: K05B050100U Input: 100-240V 50/60Hz 0.2A Output: DC 5V 1A Model No.: M1C and the series Only the model M1C was tested, since the electrical circuit design, layout, components used and internal wiring were identical for the above models, with difference being color of appearance, pack and model name. Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800831E-02 Page:5 of 6 4 RF Exposure Evaluation 4.1 RF Exposure Compliance Requirement 4.1.1 Limits According to FCC Part1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in part1.1307(b) F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4* Pi * R 2 ) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 4.1.2 Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800831E-02 Page:6 of 6 4.2 1.1.3 EUT RF Exposure Evaluation 1) For 2.4G Antenna Gain: 2dBi Antenna Gain: The maximum Gain measured in fully anechoic chamber is 1.58 in linear scale. Output Power Into Antenna & RF Exposure Evaluatio…

Text truncated - open the document above for the full version.

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 Test Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No. : CQASZ20200800831E-01 Applicant: Aidios Limited. Address of Applicant: D41, 14/F., Blk D, Wah Lok Center, 31-35 Shan Mei St., FoTan, Shatin, N.T., HongKong Equipment Under Test (EUT): EUT Name: 2.4GHz Wireless Monitoring System Model No.: M1C and the series Test Model No.: M1C Brand Name: aidios FCC ID: 2AS8PAIDIOSM1C Standards: 47 CFR Part 15, Subpart C Date of Receipt: 2020-08-12 Date of Test: 2020-08-12 to 2020-12-03 Date of Issue: 2020-12-03 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above Tested By： ( Jun Li ) Reviewed By: (Sheek Luo) Approved By: ( Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800831E-01 Page:2 of 52 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200800831E-01 Rev.01 Initial report 2020-12-03 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800831E-01 Page:3 of 52 2 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 (2013) PASS AC Power Line Conducted Emission 47 CFR Part 15, Subpart C Section 15.207 ANSI C63.10 (2013) PASS Conducted Peak Output Power 47 CFR Part 15, Subpart C Section 15.247 (b)(1) ANSI C63.10 (2013) PASS 20dB Occupied Bandwidth 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2013) PASS Carrier Frequencies Separation 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2013) PASS Hopping Channel Number 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2013) PASS Dwell Time 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2013) PASS Pseudorandom Frequency Hopping Sequence 47 CFR Part 15, Subpart C Section 15.247(b)(4)&TCB Exclusion List (7 July 2002) ANSI C63.10 (2013) PASS Band-edge for RF Conducted Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 (2013) PASS RF Conducted Spurious Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 (2013) PASS Radiated Spurious emissions 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 (2013) PASS Restricted bands around fundamental frequency (Radiated Emission) 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 (2013) PASS Model No.: M1C and the series Only the model M1C was tested, since the electrical circuit design, layout, components used and internal wiring were identical for the above models, with difference being color of appearance, pack and model name. Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800831E-01 Page:4 of 52 3 Contents Page 1 VERSION .................................................................................................................................................................. 2 2 TEST SUMMARY .................................................................................................................................................... 3 3 CONTENTS .............................................................................................................................................................. 4 4 GENERAL INFORMATION ................................................................................................................................... 5 4.1 CLIENT INFORMATION .......................................................................................................................................... 5 4.2 GENERAL DESCRIPTION OF EUT .......................................................................................................................... 5 4.3 ADDITIONAL INSTRUCTIONS................................................................................................................................. 7 4.4 TEST ENVIRONMENT ............................................................................................................................................ 8 4.5 DESCRIPTION OF SUPPORT UNITS ......................................................................................................................... 8 4.6 STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................. 9 4.7 TEST LOCATION ................................................................................................................................................. 10 4.8 TEST FACILITY ................................................................................................................................................... 10 4.9 ABNORMALITIES FROM STANDARD CONDITIONS ............................................................................................... 10 4.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ...................................................................................... 10 4.11 EQUIPMENT LIST ................................................................................................................................................ 11 5 TEST RESULTS AND MEASUREMENT DATA .............................................................................................. 12 5.1 ANTENNA REQUIREMENT ................................................................................................................................... 12 5.2 CONDUCTED EMISSIONS ..................................................................................................................................…

Text truncated - open the document above for the full version.

FCC ID: 2AS8PAIDIOSM1C 1 Photographs - EUT Test Setup 1.1 Radiated Emission 9KHz~30MHz: 30MHz~1GHz: FCC ID: 2AS8PAIDIOSM1C Above 1GHz: 1.2 Conducted Emission