2ASAQ-A31ASmart Pan-Tilt Camera

Hangzhou Vision Insight Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [February 9, 2026] U.S. Agent Designation [Hangzhou Vision Insight Technology Co., Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2ASAQ-A31A Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [Hangzhou Vision Insight Technology Co., Ltd.]. [Hangzhou Vision Insight Technology Co., Ltd.] with the FRN [0028154532] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [Aaron Xu] [Huiying Fan] [Manager] [Director] [Hangzhou Vision Insight Technology Co., Ltd.] [GLOCERTS TECHNOLOGY INC]

Hangzhou Vision Insight Technology Co., Ltd. Model Difference Data：February 9, 2026 Product description: Smart Pan-Tilt Camera Model name: A31, A11, A12, A13, A21, A22, A32, A33, A35, A36, A37, A11C, A12C, A13C, A21C, A22C, A31C, A32C, A33C, A35C, A36C, A11S, A12S, A13S, A15S, A16S, A21S, A22S, A31S, A32S, A33S, A32S, A33S, A35S, A36S, A37S, A11P, A12P, A13P, A15P, A16P, A21P, A22P, A31P, A32P, A35P, S20C, S21C, S22C, S23C, S25C Trade Name: blurams FCC ID: 2ASAQ-A31A All the model are the same circuit and RF module, only the name is different. Regards Sincerely Client’s signature : Client’s name / title : Aaron Xu（Manager） Contact information / address：Room 203, South Floor 2, Building 5, 90 Wensan Road, Xihu District, Hangzhou, China

Hangzhou Vision Insight Technology Co., Ltd. (February 9, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2ASAQ-A31A [Hangzhou Vision Insight Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) Aaron Xu Hangzhou Vision Insight Technology Co., Ltd. (February 9, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2ASAQ-A31A [Hangzhou Vision Insight Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Aaron Xu

Hangzhou Vision Insight Technology Co., Ltd. (February 9, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Aaron Xu Title: Manager

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 4 Model: A31 External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 4

FCC ID LABEL: Label Location: FCC ID: 2ASAQ-A31A Model No.: A31

FCC §15.247 (i), §2.1091 – RF Exposure FCC ID: 2ASAQ-A31A Applied procedures / limit According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna,R=20cm Test Result of RF Exposure Evaluation BT+WIFI supported simultaneous transmission: BLE+2.4GWIFI: ∑MPE Ratio =0.0013/1+0.0214/1=0.0227≤1, BLE+5.8GWIFI: ∑MPE Ratio =0.0013/1+0.0122/1=0.0135≤1, So passed. Modes& Channel Freq. (MHz) Tune up Produce power Maximu m peak output power (dBm) Output power to antenna (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm2) Limit (mW / cm2 ) Result 2.4G WIFI 802.11b&2 412 14±1 15 31.6228 3.3963 (5.31dBi) 0.0214 1 Pass BLE GFSK& LCH 2±1 3 1.9953 2.9648 (5.31dBi) 0.0013 1 Pass 5.8GWIFI 802.11n(H T40)& 5755 12±1 13 19.9526 3.0690 (4.87dBi) 0.0122 1 Pass

ShenzhenShuodianElectronicTechnologyCo.,Ltd ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber1-12 SPECIFICATION for A31S(130L)2.4-5.8GWiFiantenna CustomerNo. ProductNo. SD-6-FPC-70MM(whitelowloss) Author：XiaofengZengReview：Liming ReleaseDate：2025.12.03 ShenZhenShuodianElectronicTechnologyCo.,Ltd Room201,Building2,NantaiyunChuangguPark,TangweiCommunity,FenghuangStreet, GuangmingDistrict,ShenzhenCity,GuangdongProvince E-mail ： [email protected] Tel:0755-86006322 Fax:0755-86006323 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number2-8 ShenzhenShuodianElectronicTechnologyCo.,Ltd ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber2-12 Contents SPECIFICATION....................................................................................................................1 SHENZHENSHUODIANELECTRONICTECHNOLOGYCO.,LTD.........................................1 CONTENTS..............................................................................................................................2 1.BILATERALCONFIRMATIONPAGE............................................................................3 2.GENERAL.........................................................................................................................4 3.GENERALPRODUCTSPECIFICATIONS..................................................................4 4.SPECIFICATIONDETIALS..............................................................................................5 4.1MECHANICALPROPERTIES.................................................................................................5 4.2ELECTRICPERFORMANCE...............................................................................................7 5.PRODUCTPACKAGING..............................................................................................11 6.DOCUMENTRESUME.................................................................................................12 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number3-8 ShenzhenShuodianElectronicTechnologyCo.,Ltd ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber3-12 1.BilateralConfirmationpage 1.1Customersignature Customer： Separtment/postSignDate HardwareEngineer/RD Mechanical/MD ProjectManager/PM Commercial/Puchasing Checker 1.2SignatureofShuoDianTechnologycompany Separtment/postSignDate AntennaEngineer/RD Mechanical/MD ProjectManager/PM QA Checker ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number4-8 ShenzhenShuodianElectronicTechnologyCo.,Ltd ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber4-12 2.General 2.1Scopeofapplication ThisspecificationisonlyapplicabletoA31S(130L)WiFiantenna 2.2Operatingtemperaturerange Temperaturerangeofthisproduct:-20~+65 °C 2.3Storagetemperaturerange: Thisproductisstoredat-30~+75°C 3.Generalproductspecifications NO.ITEMSDETAILS 1TypeA31S(130L) 2OperatingFrequencyBand2400-2500MHZ5100-5900MHZ 3VSWR≤4.0 4Impedance50Ω 5AntennaTypeDipole 6AntennacompositionFPC+Cable 7EntityPicture ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number5-8 ShenzhenShuodianElectronicTechnologyCo.,Ltd ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber5-12 4.SpecificationDetials 4.1MechanicalProperties 4.11ProductComposition ： No.MaterialSize(MM) 1FPC 40.25*7.38Black 2CABLE IPEX-1 φ 01.13L=70white lowloss 4.12Apperance Goodappearancewithoutscars、dirts、protuberances,etc. 4.13AntennaPictureandStructureDimension Productdrawings: ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number6-8 ShenzhenShuodianElectronicTechnologyCo.,Ltd ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber6-12 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number7-8 ShenzhenShuodianElectronicTechnologyCo.,Ltd ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber7-12 4.2ElectricPerformance 4.21Testcondition Environment ： Temperature ： 10 °C ——+30 °C Humidity ： ≤80% （ +40 °C） Atmospher ： 750mmkg±30mmkg Equipment ： NetworkAnalyzer:KEYSIGHTE5071C Multi-probemicrowaveanechoic chamber 4.22 TestDataforElectricalPerformance: 4.22.1S11oftheAntenna: Marker(MHZ)240024502500510057005850 Returnloss-15.37-10.94-7.43-4.80-7.08-8.72 VSWR1.441.812.463.712.502.12 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number8-8 ShenzhenShuodianElectronicTechnologyCo.,Ltd ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber8-12 4.22.2 Passivegain 、 efficiencyandRadiationPattern: Marker（MHz）2400245025005700575058005850 Gain（dBi） 5.314.723.484.874.424.484.16 Efficiency（%） 49.0949.6247.9543.6240.7843.3241.68 RadiationPattern2450MHz 2450MHz： ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number9-8 ShenzhenShuodianElectronicTechnologyCo.,Ltd ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber9-12 . 5800MHz： ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number10-8 ShenzhenShuodianElectronicTechnologyCo.,Ltd ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber10-12 4.22.4Antennaactivedatasheet: protocol mode bandwidth rate channelTRPTISRemark 802.11b 2.4G 11M 1 17.27-80.3 6 17.03-83.82 11 16.87-83.75 802.11g 2.4G 54M 1 15.27-69.09 6 14.62-71.55 11 14.63-71.72 802.11n 2.4G MCS7 1 15.12-67.28 6 14.47-69.72 11 14.51-69.84 802.11a 5.8G 54M 149 13.62-72.44 157 13.55-73.01 165 14.02-73.77 Note:SD-6,lowlosscoaxialcable 4.22.5Antennalocation ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number11-8 ShenzhenShuodianElectronicTechnologyCo.,Ltd ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber11-12 5.ProductPackaging Mannerofpacking: Packedinselfsealedbags,200pcseach. Antennapasting position Alignitwiththetop edgehere ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number12-8 ShenzhenShuodianElectronicTechnologyCo.,Ltd ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber12-12 6.DocumentResume DocumentNo. ReleaseDate2025/12/03 AuthorXiaofengZeng ReviewLiMing RevisedHistory DateVersionRevisedRecord 2025/12/031.00NewProject

Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 41 TEST REPORT Compiled by: Reviewed by: Approved by: Kai Chen Martin Feng Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Test item description: Smart Pan-Tilt Camera FCC ID: 2ASAQ-A31A Trademark(s): blurams Model/Type reference: A31, A11, A12, A13, A21, A22, A32, A33, A35, A36, A37, A11C, A12C, A13C, A21C, A22C, A31C, A32C, A33C, A35C, A36C, A11S, A12S, A13S, A15S, A16S, A21S, A22S, A31S, A32S, A33S, A32S, A33S, A35S, A36S, A37S, A11P, A12P, A13P, A15P, A16P, A21P, A22P, A31P, A32P, A35P, S20C, S21C, S22C, S23C, S25C Applicant’s name: Hangzhou Vision Insight Technology Co., Ltd. Address: Room 203, South Floor 2, Building 5, 90 Wensan Road, Xihu District, Hangzhou, Zhejiang, China Manufacturer: Hangzhou Vision Insight Technology Co., Ltd. Address: Room 203, South Floor 2, Building 5, 90 Wensan Road, Xihu District, Hangzhou, Zhejiang, China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Dec. 16, 2025 Sample tested Date: Dec. 16, 2025 to Jan. 27, 2026 Issue Date: Jan. 27, 2026 Report No.: CTB25121616001RF01 Test Standards FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2020 Test Results PASS Remark: This is Bluetooth radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25121616001RF01 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 41 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ........................................................................................................................................ 3 2. TEST SUMMARY ........................................................................................................................... 4 3. MEASUREMENT UNCERTAINTY ................................................................................................. 5 4. PRODUCT INFORMATION AND TEST SETUP ............................................................................ 6 4.1 Product Information .......................................................................................................................... 6 4.2 Test Setup Configuration .................................................................................................................. 6 4.3 Support Equipment........................................................................................................................... 6 4.4 Channel List ..................................................................................................................................... 7 4.5 Test Mode ........................................................................................................................................ 7 4.6 Test Environment ............................................................................................................................. 7 5. TEST FACILITY AND TEST INSTRUMENT USED ....................................................................... 8 5.1 Test Facility ...................................................................................................................................... 8 5.2 Test Instrument Used ....................................................................................................................... 8 6. AC POWER LINE CONDUCTED EMISSION ................................................................................ 11 6.1 Block Diagram Of Test Setup ......................................................................................................... 11 6.2 Limit ................................................................................................................................................ 11 6.3 Test procedure ............................................................................................................................... 11 6.4 Test Result ..................................................................................................................................... 13 7. RADIATED SPURIOUS EMISSION ............................................................................................. 15 7.1 Block Diagram Of Test Setup ......................................................................................................... 15 7.2 Limit ................................................................................................................................................ 15 7.3 Test procedure ............................................................................................................................... 16 7.4 Test Result ..................................................................................................................................... 17 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS ............................................... 24 8.1 Block Diagram Of Test Setup ......................................................................................................... 24 8.2 Limit ................................................................................................................................................ 24 8.3 Test procedure ...................................................................................................…

Text truncated - open the document above for the full version.

Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 82 TEST REPORT Compiled by: Reviewed by: Approved by: Kai Chen Martin Feng Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Test item description: Smart Pan-Tilt Camera FCC ID: 2ASAQ-A31A Trademark(s): blurams Model/Type reference: A31, A11, A12, A13, A21, A22, A32, A33, A35, A36, A37, A11C, A12C, A13C, A21C, A22C, A31C, A32C, A33C, A35C, A36C, A11S, A12S, A13S, A15S, A16S, A21S, A22S, A31S, A32S, A33S, A32S, A33S, A35S, A36S, A37S, A11P, A12P, A13P, A15P, A16P, A21P, A22P, A31P, A32P, A35P, S20C, S21C, S22C, S23C, S25C Applicant’s name: Hangzhou Vision Insight Technology Co., Ltd. Address: Room 203, South Floor 2, Building 5, 90 Wensan Road, Xihu District, Hangzhou, Zhejiang, China Manufacturer: Hangzhou Vision Insight Technology Co., Ltd. Address: Room 203, South Floor 2, Building 5, 90 Wensan Road, Xihu District, Hangzhou, Zhejiang, China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Dec. 16, 2025 Sample tested Date: Dec. 16, 2025 to Jan. 27, 2026 Issue Date: Jan. 27, 2026 Report No.: CTB25121616001RF02 Test Standards FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2020 Test Results PASS Remark: This is WIFI-2.4GHz band radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25121616001RF02 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 82 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ........................................................................................................................................................ 4 2. TEST SUMMARY .......................................................................................................................................... 5 3. MEASUREMENT UNCERTAINTY............................................................................................................. 6 4. PRODUCT INFORMATION AND TEST SETUP ..................................................................................... 7 4.1 Product Information .................................................................................................................................................... 7 4.2 Test Setup Configuration .......................................................................................................................................... 7 4.3 Support Equipment ..................................................................................................................................................... 7 4.4 Channel List .................................................................................................................................................................. 8 4.5 Test Mode ...................................................................................................................................................................... 8 4.6 Test Environment ........................................................................................................................................................ 8 5. TEST FACILITY AND TEST INSTRUMENT USED ................................................................................ 9 5.1 Test Facility ................................................................................................................................................................... 9 5.2 Test Instrument Used ................................................................................................................................................. 9 6. AC POWER LINE CONDUCTED EMISSION .......................................................................................... 12 6.1 Block Diagram Of Test Setup ................................................................................................................................ 12 6.2 Limit ............................................................................................................................................................................... 12 6.3 Test procedure ........................................................................................................................................................... 12 6.4 Test Result .................................................................................................................................................................. 14 7. RADIATED SPURIOUS EMISSION ........................................................................................................ 16 7.1 Block Diagram Of Test Setup ................................................................................................................................ 16 7.2 Limit ............................................................................................................................................................................... 16 7.3 Test procedure ........................................................................................................................................................... 17 7.4 Test Result ............................................................................................................................................................…

Text truncated - open the document above for the full version.

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 2 Model: A31 Radiated Emission Below 1G Above 1G Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 2 Conducted emissions