2ASBY-CW006Wireless Charger

front Product size: 80x120mm Material: 100g writing paper printing: double- sided monochrome printing process: folding back CW006 Instruction manual 80mm 120mm How to use Charging Your Phone USB-C mouth Input Wireless Charge MPP Maximum Output 5V/3A, 9V/2.22A 5W/15W MPP 15W Precautions Disclaimers After-sale service • Please read this instruction manual carefully before using this product. • The mobile power supply shall be used within the charging and discharging rated specification specified in the specification, and the ambient temperature during charging and discharging shall be between 15 °C and 35 °C. • Please keep this product and related accessories well away from children. • Keep away from inflammables and explosives when using the product. • Please use the specified charger and approved accessories. Unauthorized power charger and accessories may damage your electronic products and mobile power host. • Please use the mobile power supply properly according to the local laws, regulations and restrictions. In case of unauthorized situations, such as aircraft landing or near medical instruments, you should avoid charging and turn off your mobile phone or other electronic products immediately to avoid interference. • The product may be damaged due to improper operation during transportation. If the product is found to be abnormal, such as package damage, battery package deformation, smell of electrolyte and leakage, stop using the product immediately. • Do not put the disused mobile power into the dustbin, but put it into the special battery recycling bin. • Damage caused by not following the operation instructions and safety warnings in the instruction manual. • Damage caused by operation in harsh environment beyond the instruction manual. • Damage caused by storage conditions not meeting the requirements of this instruction manual. • It is forbidden to apply or operate beyond the conditions described in this instruction manual. If the customer needs, he / she should contact manufacturer technology in advance. In this case, additional experiments are required to verify the performance and safety. Brief introduction Basic instructions for product operation • This product realizes short-distance wireless transmission of electric energy through magnetic induction, which can charge the device, and adopts the technical working morking method of fixed frequency modulation duty cycle. The receiving and device that meets the Qi2.0 MPP standard can be charged with this product, and supports fast wireless charging, and supports fast wireless charging, applicable to devices with iphone12 or above. • This product has wide operating voltage (DC 5V-9V) which can adapt to most adapter and fast charge adapter. • When the product is connected to the power supply. At this time, the device to be charged will start wireless charging. • Foreign body Detection function (FOD): When metal objects such as coins and keys are placed on the coil of the product in standby state, and stop discharge. The equipment damage and safety problems caused by any of the following points are not within the scope of the warranty and responsibility of manufacturer. The product shall be valid within 12 months from the date of completion or delivery. For FAQs and more information, please visit: www.trusda.com/support ① ② ③ This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:4358SBANNOCKSTENGLEWOOD,CO80110UnitedStates FRN:0034562900 ContactName:PeterDavis TelephoneNo:561-235-6113 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofShenzhenTrusdaIndustrialCo.,Ltd. TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:ShenzhenTrusdaIndustrialCo.,Ltd. ProductDescription:WirelessCharger FRN:0028158913 GranteeCode:2ASBY FCCID:2ASBY-CW006 ContactName:TaoLi Address:3/F,Building4,LianchuangTechnologyPark,BulanRoad,NanwanStreet,Longgang District,Shenzhen,China TelephoneNo:13410858272 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2024/8/29 Applicant’sName:TaoLiUSAgentforServiceofProcess’sName: Title:EngineeringsupervisorTitle:Manager SignatureSignature

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen Trusda Industrial Co., Ltd. Date：Aug. 28, 2024 Product Model Number: CW006 FCC ID：2ASBY-CW006 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Engineering supervisor Email: [email protected] Telephone: 13410858272 On behalf of: Shenzhen Trusda Industrial Co., Ltd.

Shenzhen Trusda Industrial Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 28, 2024 Subject; Request for Confidentiality FCC ID: 2ASBY-CW006 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Tao Li Title: Engineering supervisor

Shenzhen Chenxing Electronic Technology Co., LTD Company name: Shenzhen Chenxing Electronic Technology Co., LTD Factory address: 5F, Building 1, Xinke City Science and Technology Industrial Park, 51 Dabao Road, Xin 'an Street, Bao 'an District, Shenzhen Page 1 PRODUCT SPECIFICATION FOR APPROVAL Shenzhen Trusda Industrial Co., Ltd. transmitting coil 4611200000054 CUSTOMER: PRODUCT： PART No. PRODUCT SPEC: Sensitivity specification: 7.9uH±10% Disk specifications: 42.5*5.3*0.8 Double slot +18*0.8 small disc Wire specification: enamelled wire 0.08*80*11Ts (inner diameter 21.7mm/ outer diameter 40.5mm) Outlet length: 50mm 3mm high temperature tape/common adhesive 2024.06.22 DATE: VERSION： REV1.0 RevisionModified ContentPrincipleDateNote REV 1.0 first releaseXue Lei 2024-06-22 PREPARED BYCHECKED BYAPPROVED BY Authorized signature & company chop Attached is the product specification, if you have any questions, please timely feedback to us, thank you! Shenzhen Chenxing Electronic Technology Co., LTD Company name: Shenzhen Chenxing Electronic Technology Co., LTD Factory address: 5F, Building 1, Xinke City Science and Technology Industrial Park, 51 Dabao Road, Xin 'an Street, Bao 'an District, Shenzhen Page 2 SPECIFICATION 一、product size Disk diameter A 42.5±0.5mm Coil outer diameter B 40.5±1mm Coil inner diameter C 21.7±0.5mm Product thickness D <2.2mm Outlet length E 50mm±2mm Solder length F 3±1mm Disk opening diameter G 5±0.3mm Diskette thickness 0.8±0.05mm Diskette shape Circular double slot High temperatu retape width 3mm Backing thickness Common d ouble-sided tape Small part ition disk 18*0.8 magnetic sheet Shenzhen Chenxing Electronic Technology Co., LTD Company name: Shenzhen Chenxing Electronic Technology Co., LTD Factory address: 5F, Building 1, Xinke City Science and Technology Industrial Park, 51 Dabao Road, Xin 'an Street, Bao 'an District, Shenzhen Page 3 二、schematic diagram 三、Winding parameter TERMINALWIRETurnsWinding Direction SF 0.08*80P 11TsCCW 四、electrical specification TEMPERATURE:25±10°C, RELATIVE HUMIDITY:65±20% ITEMTERMINALSPECIFICATIONTEST FREQUENCYTEST EQUIPMENTS IND.S-F 7.9uH±10% 100KHz/1.0VLCZ METER 1062B

Ext Photos Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

Radium carving content: The text is concentric with the outer circle of the product 2.873mm 23.5mm

Int Photo Photo 1 Photo 2 Photo 3 Photo 4 ANT Photo 5

- Page 1 of 12 - Report No.: HB20240806027E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Wireless Charger Trade Mark: Trusda Model Number: CW006 FCC ID: 2ASBY-CW006 Prepared for Shenzhen Trusda Industrial Co., Ltd. 3/F, Building 4, Lianchuang Technology Park, Bulan Road,Nanwan Street, Longgang District, Shenzhen, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 12 - Report No.: HB20240806027E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................. 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 6 2.1 TEST LABORATORY ..................................................................................................................................................... 6 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 6 2.4 TEST SOFTWARE ........................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 7 4 RF EXPOSURE .................................................................................................................................................... 8 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 8 4.1.1. Limit ............................................................................................................................................................ 8 4.1.2. Test Procedures ........................................................................................................................................... 8 4.1.3. Equipment Approval Considerations item 5 b) of KDB 680106 D01 Wireless ............................................. 9 4.1.4. Test Setup .................................................................................................................................................... 9 4.1.5. Test Result ................................................................................................................................................. 10 5 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................12 - Page 3 of 12 - Report No.: HB20240806027E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Trusda Industrial Co., Ltd. Address ................................. : 3/F, Building 4, Lianchuang Technology Park, Bulan Road,Nanwan Street, Longgang District, Shenzhen, China Manufacturer's Name .......... : Shenzhen Trusda Industrial Co., Ltd. Address ................................. : 3/F, Building 4, Lianchuang Technology Park, Bulan Road,Nanwan Street, Longgang District, Shenzhen, China Product description Product name ........................ : Wireless Charger Model Number ....................... : CW006 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Aug. 06, 2024~ Aug. 26, 2024 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g Liu) Authorized Signatory : (L e o S u) - Page 4 of 12 - Report No.: HB20240806027E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China …

Text truncated - open the document above for the full version.

- Page 1 of 31 - Report No.: HB20240806027E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: Wireless Charger Trade Mark: Trusda Model Number: CW006 FCC ID: 2ASBY-CW006 Prepared for Shenzhen Trusda Industrial Co., Ltd. 3/F, Building 4, Lianchuang Technology Park, Bulan Road,Nanwan Street, Longgang District, Shenzhen, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 31 - Report No.: HB20240806027E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................. 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................... 7 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 8 4 LIST OF TEST EQUIPMENT .................................................................................................................................10 5 TEST ITEM AND RESULTS ...................................................................................................................................12 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................................. 13 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 22 6 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................24 7 PHOTOGRAPHS OF THE EUT..............................................................................................................................26 - Page 3 of 31 - Report No.: HB20240806027E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Trusda Industrial Co., Ltd. Address ................................. : 3/F, Building 4, Lianchuang Technology Park, Bulan Road,Nanwan Street, Longgang District, Shenzhen, China Manufacturer's Name .......... : Shenzhen Trusda Industrial Co., Ltd. Address ................................. : 3/F, Building 4, Lianchuang Technology Park, Bulan Road,Nanwan Street, Longgang District, Shenzhen, China Product description Product name ........................ : Wireless Charger Model Number ....................... : CW006 Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Aug. 06, 2024~ Aug. 26, 2024 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g Liu) Authorized Signatory : (L e o S u) - Page 4 of 31 - Report No.: HB20240806027E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 2…

Text truncated - open the document above for the full version.

- Page 1 of 2 - Test Setup Photos Radiated Emission Below 30MHz Radiated Emission Above 30MHz - Page 2 of 2 - Conducted emission MPE