2ASDI-EF906Wireless Earphones with Bluetooth

FCC ID: 2ASDI-EF906 IC: 24662-EF906 Model Name: EF906 External Photos 1. EUT front view 2. EUT rear view 3. EUT left side view 4. EUT right side view 5. EUT top view 6. EUT bottom view 7. EUT front view 8. EUT rear view 9. EUT left side view 10. EUT right side view 11. EUT top view 12. EUT bottom view 13. EUT top view 14. EUT bottom view 15. Accessories

1、 Label 2、 Label location：In the manual

FCC ID: 2ASDI-EF906 IC: 24662-EF906 Model Name: EF906 Internal Photos 1. EUT uncover view 2. Antenna view Bluetooth Antenna

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China T el:86-755-36698555 Fax: 86-755-36698525 Http://w ww.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Page 1 of 32 TEST REPORT APPLICANT : Tiinlab Corporation PRODUCT NAME : Wireless Earphones MODEL NAME : EF906 BRAND NAME : 1MORE FCC ID : 2ASDI-EF906 STANDARD(S) : FCC 47 CFR Part 2(2.1093) IEEE 1528-2013 RECEIPT DATE : 2023-04-25 TEST DATE : 2023-04-28 ISSUE DATE : 2023-06-20 Edited by: Xie Yiy un (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Page 2 of 32 DIRECTORY 1 SAR Results Summary ............................................................................................... 4 2 Technical Information ................................................................................................ 5 2.1 Applicant and Manufacturer Information .............................................................. 5 2.2 Equipment under Test (EUT) Description ............................................................. 5 2.3 Accessories Information ........................................................................................ 5 2.4 Environment of Test Site ........................................................................................ 6 3 Specific Absorption Rate (SAR) ................................................................................ 7 3.1 Introduction ............................................................................................................. 7 3.2 SAR Definition ......................................................................................................... 7 4 RF Exposure Limits .................................................................................................... 8 4.1 Uncontrolled Environment ..................................................................................... 8 4.2 Controlled Environment ......................................................................................... 8 5 Applied Reference Documents .................................................................................. 9 6 SAR Measurement System ...................................................................................... 10 6.1 E-Field Probe ......................................................................................................... 11 6.2 Data Acquisition Electronics (DAE) ..................................................................... 11 6.3 Robot ...................................................................................................................... 12 6.4 Measurement Server ............................................................................................. 12 6.5 Light Beam Unit ..................................................................................................... 12 6.6 Phantom ................................................................................................................. 13 6.7 Device Holder ........................................................................................................ 13 6.8 Data Storage and Evaluation ............................................................................... 14 6.9 Test Equipment List .............................................................................................. 16 7 Tissue Simulating Liquids ....................................................................................... 17 8 SAR System Verification .......................................................................................... 19 9 EUT Testing Position ................................................................................................ 21 9.1 SAR Evaluations near the Mouth/Jaw Regions of the SAM .............................. 21 9.2 Body Worn Accessory Configurations ............................................................... 21 9.3 DUTs with Alternative form Factor ...................................................................... 22 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Page 3 of 32 10 Measurement Procedures ........................................................................................ 23 10.1 Spatial Peak SAR Evaluation ............................................................................... 24 10.2 Power Reference Measurement ........................................................................... 24 10.3 Area Scan Procedures .......................................................................................... 24 10.4 Zoom Scan Procedures ........................................................................................ 25 10.5 SAR Averaged Methods ....................................................................................... 25 10.6 Power Drift Monitoring ......................................................................................... 25 11 Conducted RF Output Power ..............................…

Text truncated - open the document above for the full version.

Annual validation for test lab. Appendix Annual validation for Test Lab. General calibration information Date 2022.12.15 Test Laboratory ShenZhen Morlab Communications Technology Co., Ltd. Antenna serial No. D2450V2-SN: 805 Antenna Parameters with Head TSL Impedance, transformed to feed point 50.661Ω-5.59jΩ Return Loss -23.203dB General Antenna Parameters and Design Electrical Delay (one direction) 1.276 ns After long term use with 100W radiated power，only a slight warming of the dipole near the feed point can be measured The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard No excessive force must be applied to the dipole arm， because they might bend or the soldered connections near the feed point may be damaged . Annual validation for test lab. Annual validation for test lab. Appendix Impedance Measurement Plot for Head TSL

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Annex C Plots of System Performance Check Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.04.28 System Check_2450MHz Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450 Medium parameters used: f = 2450 MHz; σ = 1.768 S/m; ε r = 39.273; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.6, 7.6, 7.6) @ 2450 MHz; Calibrated: 2023.03.15 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2023.02.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW2450/Area Scan (81x101x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 16.1 W/kg CW2450/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 89.45 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 26.2 W/kg SAR(1 g) = 12.67 W/kg; SAR(10 g) = 5.91 W/kg Maximum value of SAR (measured) = 14.3 W/kg 0 dB = 14.3 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Annex D Plots of Maximum SAR Test Results Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.04.28 Bluetooth_DH5_Back Side_0mm_Ch78_L Communication System: UID 0, Bluetooth (0); Frequency: 2480 MHz;Duty Cycle: 1:1.085 Medium: HSL_2450 Medium parameters used: f = 2480 MHz; σ = 1.839 S/m; ε r = 38.675; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22. 2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.6, 7.6, 7.6) @ 2480 MHz; Calibrated: 2023.03.15 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2023.02.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch78/Area Scan (41x51x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.541 W/kg Ch78/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.64 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 0.778 W/kg SAR(1 g) = 0.284 W/kg; SAR(10 g) = 0.118 W/kg Maximum value of SAR (measured) = 0.444 W/kg 0 dB = 0.444 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.04.28 Bluetooth_DH5_Back Side_0mm_Ch0_R Communication System: UID 0, Bluetooth (0); Frequency: 2402 MHz;Duty Cycle: 1:1.085 Medium: HSL_2450 Medium parameters used: f = 2402 MHz; σ = 1.749 S/m; ε r = 38.922; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22. 2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.6, 7.6, 7.6) @ 2440 MHz; Calibrated: 2023.03.15 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2023.02.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch0/Area Scan (41x51x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.441 W/kg Ch0/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.21 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.706 W/kg SAR(1 g) = 0.276 W/kg; SAR(10 g) = 0.117 W/kg Maximum value of SAR (measured) = 0.472 W/kg 0 dB = 0.472 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Annex E Conducted Power Note: Conducted power unit: dBm The target power was recorded in the manufacture document. Left Ear 1Mbps2Mbps3Mbps CH 0024026.924.44.44 CH 3924416.944.644.63 CH 7824807.334.594.74 85.55.5 545454 76.877.0777.33 1Mbps2Mbps CH 0024025.973.18 CH 1924406.163.32 CH 3924806.193.42 74 5454 60.8831.44 Tune-up Limit Tune-up Limit Average power (dBm) Power Setting Duty Cycle % Average power (dBm) Frequency (MHz) Mode BR / EDR Channel Power Setting Channel Duty Cycle % Mode LE Frequency (MHz) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Right Ear 1Mbps2Mbps3Mbps CH 0024024.832.412.47 CH 3924414.561.741.81 CH 7824804.221.691.42 5.533 545454 76.876.877.07 1Mbps2Mbps CH 0024023.881.02 CH 1924403.550.74 CH 3924803.040.32 4.52 5454 60.831.36 Power Setting Duty Cycle % Tune-up Limit Tune-up Limit Average power (dBm) BR / EDR Power Setting Duty Cycle % ModeChannel Frequency (MHz) LE ModeChannel Frequency (MHz) Average power (dBm) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Annex F DASY Calibration Certificate

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 107 REPORT No.：SZ23030352W01 TEST REPORT APPLICANT : Tiinlab Corporation PRODUCT NAME : Wireless Earphones MODEL NAME : EF906 BRAND NAME :1MORE FCC ID :2ASDI-EF906 STANDARD(S) :47 CFR Part 15 Subpart C RECEIPT DATE : 2023-03-28 TEST DATE :2023-03-30 to 2023-04-16 ISSUE DATE :2023-06-16 Edited by: Peng Mi (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 107 REPORT No.：SZ23030352W01 DIRECTORY 1. Summary of Test Result ················································································ 4 1.1. Testing Applied Standards ·········································································· 5 1.2. Test Equipment List ··················································································· 6 1.3. Measurement Uncertainty ··········································································· 8 1.4. Testing Laboratory ····················································································· 8 2. General Description ····················································································· 9 2.1. Information of Applicant and Manufacturer ··················································· 9 2.2. Information of EUT ····················································································· 9 2.3. Channel List of EUT ·················································································· 10 2.4. Test Configuration of EUT ·········································································· 11 2.5. Test Conditions ························································································ 11 2.6. Test Setup Layout Diagram ········································································ 11 3. Test Results ······························································································· 14 3.1. Antenna Requirement ··············································································· 14 3.2. Duty Cycle of Test Signal ··········································································· 15 3.3. Maximum Peak Conducted Output Power ···················································· 16 3.4. Maximum Average Conducted Output Power ··············································· 17 3.5. 6 dB Bandwidth ························································································ 18 3.6. Conducted Spurious Emissions and Band Edge ··········································· 19 3.7. Power Spectral Density ············································································· 20 3.8. Conducted Emission ················································································· 21 3.9. Restricted Frequency Bands ······································································ 22 3.10. Radiated Emission ···················································································· 23 Annex A Test Data and Result ·········································································· 25 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 107 REPORT No.：SZ23030352W01 Change History Version Date Reason for change 1.0 2023-06-16 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 107 REPORT No.：SZ23030352W01 1. Summary of Test Result No. Section Description Test Date Test Engineer Result Method Determination /Remark 1 15.203 Antenna Requirement N/A N/A PASS No deviation 2 N/A Duty Cycle of Test Signal Apr. 01, 2023 Zhong Yanshan PASS No deviation 3 15.247(b) Maximum Peak Conducted Output Power Apr. 01, 2023 Zhong Yanshan PASS No deviation 4 15.247(b) Maximum Average Conducted Output Power Apr. 01, 2023 Zhong Yanshan PASS No deviation 5 15.247(a) Bandwidth Apr. 01, 2023 Zhong Yanshan PASS No deviation 6 15.247(d) Conducted Spurious Emission and Band Edge Apr. 01, 2023 Zhong Yanshan PASS No deviation 7 15.247(e) Power Spectral Density Apr. 01, 2023 Zhong Yanshan PASS No deviation 8 15.207 Conducted Emission N/A N/A N/A Note1 N/A 9 15.247(d) Restricted Frequency Bands Apr. 16, 2023 Li Hanbin PASS No deviation 10 15.209, 15.247(d) Radiated Emission Apr. 16, 2023 Li Hanbin PASS No deviation Note 1: Measurements to demonstrate compliance with the conducted limits are not required for devices which only employ battery power for operation and which do not operate from the AC power lines or contain provisions for operation while connected to the AC power lines. Note 2: The tests were performed according to the method of measurements prescribed in ANSIC63.10-2013 and KDB558074 D01 v05r02. Note 3: Additions to, deviation, or exclusions from t…

Text truncated - open the document above for the full version.

深圳市合拓科技有限公司 样品承认书 Sample Approved Sheet 合拓（EF906）承认书 客户名称:深圳市芯中芯科技有限公司 客户料号: 1010205011 客户规格: PCB/FPC/HT-EF906-L-V3/两层沉金/黑色/30.06*13.76*0.1mm/合拓 原厂料号: 20230323001 品 牌 : 合拓自产HT-EF906-L-V3 包装方式: 1.纸箱 丝印说明： 合拓科技 判定审核组 制订审核批准承认书完成时间 钟晓鸣胡雪文戴庭庭 2023.03.01 芯中芯（客户）判定审核组 承认书编号 承认书提供时间 承认审核批准承认日期 评审项目：□承认书 3 份 □规格书 / 图纸☑检测报告 □样品PCS □安规 □HSF 评审结果：□接受□有条件接受□拒绝 Page 2 1. Antenna picture The report mainly provides the test status of the electrical properties parameters of HT-EF906-L-V3. The HT-EF906-L-V3 antenna is a BT Band . The antenna Picture and assembly are shown below. 项次日期版次修订说明备注 12023-03-01A0首次发行 2 Page 3 LDS Antenna picture &assemblypicture 2.Antenna Test Equipment Introduction Test of antenna input characteristics usingAgilent E5071C and Agilent 5062Avector network analyzer; The radiation pattern of the antenna are tested using the Satimo starlab 3D near field Anechoic Chamber , and the instrument is used to agilent8960 E5515 and Agilent E4438C. The test coordinates of the darkroom are as follows: 3.Electrical Specification 3-2 Passive S11 parameter Measuring Method is a 50Ωcoaxial cable is connected to the antenna. Then this cable is connected to a network analyzer to measure the S11 parameter, Keeping this fixture away from metal at least 20cm. Page 4 VSWR 3-3 Antenna Matching Network Page 5 Page 6 4. MechanicalSpecification: MechanicalConfiguration(Unit:mm) Theappearanceof theantennais accordingto drawingFigure8

深圳市合拓科技有限公司 样品承认书 Sample Approved Sheet 合拓（EF906）承认书 客户名称:深圳市芯中芯科技有限公司 客户料号: 1010205012 客户规格: PCB/FPC/HT-EF906-R-V3/两层沉金/黑色/30.06*13.76*0.1mm/合拓 原厂料号: 20230323001 品 牌 : 合拓自产HT-EF906-R-V3 包装方式: 1.纸箱 丝印说明： 合拓科技 判定审核组 制订审核批准承认书完成时间 钟晓鸣胡雪文戴庭庭 2023.03.01 芯中芯（客户）判定审核组 承认书编号 承认书提供时间 承认审核批准承认日期 评审项目：□承认书 3 份 □规格书 / 图纸☑检测报告 □样品PCS □安规 □HSF 评审结果：□接受□有条件接受□拒绝 Page 2 1. Antenna picture The report mainly provides the test status of the electrical properties parameters of HT-EF906-R-V3. The HT-EF906-R-V3 antenna is a BT Band . The antenna Picture and assembly are shown below. 项次日期版次修订说明备注 12023-03-01A0首次发行 2 Page 3 LDS Antenna picture &assemblypicture 2.Antenna Test Equipment Introduction Test of antenna input characteristics usingAgilent E5071C and Agilent 5062Avector network analyzer; The radiation pattern of the antenna are tested using the Satimo starlab 3D near field Anechoic Chamber , and the instrument is used to agilent8960 E5515 and Agilent E4438C. The test coordinates of the darkroom are as follows: 3.Electrical Specification 3-2 Passive S11 parameter Measuring Method is a 50Ωcoaxial cable is connected to the antenna. Then this cable is connected to a network analyzer to measure the S11 parameter, Keeping this fixture away from metal at least 20cm. Page 4 VSWR 3-3 Antenna Matching Network Page 5 Page 6 4. MechanicalSpecification: MechanicalConfiguration(Unit:mm) Theappearanceof theantennais accordingto drawingFigure8

FCC ID: 2ASDI-EF906 IC: 24662-EF906 Model Name: EF906 Test Setup Photos 1. Conducted emission main’s port front view 2. Conducted emission main’s port side view 3. Radiated emission (9KHz-30MHz) 4. Radiated emission (30MHz-1GHz) 5. Radiated emission (above 1GHz) 6. RF measurement setup (Bluetooth LE)

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Annex B Test Setup Photos Left ear Front Side (Test distance: 0mm) Back Side (Test distance: 0mm) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Left Side (Test distance: 0mm) Right Side (Test distance: 0mm) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Top Side (Test distance: 0mm) Bottom Side (Test distance: 0mm) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Right ear Front Side (Test distance: 0mm) Back Side (Test distance: 0mm) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Left Side (Test distance: 0mm) Right Side (Test distance: 0mm) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030352S01 Top Side (Test distance: 0mm) Bottom Side (Test distance: 0mm)