2ASKH-SN01Battery Operated LTE Celluar GPS Tracker

833.213.5839 www.phillips-connect.com StealthNet 4G LTE Asset Tracking Gateway Installs in less than 10 minutes! SOLUTION HIGHLIGHTS ƒ Real-time visibility and simple geofencing ƒ Automated alerts configurable in the Phillips Connect User Interface ƒ Unlimited Bluetooth Connectivity - Easily add sensors as they become available ƒ 6 months of reporting (when battery is fully charged and asset is stationary) ƒ Flawless operation in the harshest temperatures ƒ 5 minute reporting when in motion ƒ 2 reports per day when parked POWERFUL COST SAVING TOOLS ƒ Do more with fewer trailers ƒ Optimize trailer pool management ƒ Automate yard checks ƒ Covert installations help eliminate trailer theft and cargo loss ƒ Improve driver satisfaction ƒ Manage detention billing Phillips Connect’s best in class hardware with robust platform provides real -time tracking, analysis, and insights. Ideal for trailers and chassis. StealthNet is an easily expandable tracking solution designed for the toughest trucking conditions. Improve driver uptime and overall ROI with a complete view into your fleet. StealthNet GatewayStealthNet Installed on Chassis 10 Theft Recovery Unlimited Bluetooth Connectivity 10 Minute Installation GPS, Geofencing, Route Tracking 833.213.5839 www.phillips-connect.com StealthNet Part# 77-6900 CELLULAR TECHNOLOGY LTE Cat 1 Integrated high sensitivity antenna Auto register to packet network GPS FUNCTIONALITY Channels: 56 Tracking Sensitivity: -162 dBm Acquisition Sensitivity: -148 dBm Location Accuracy: 2.5 CEP BLUETOOTH Low Energy (BLE) Version 4.2 POWER MANAGEMENT Battery Type: 4 x 18650 Li-ion Battery Capacity: 36Wh (10.6 Ah) Expected Battery Life: 10 Years ƒ Deep Sleep: < 400uW ƒ Energy Per Report: < 8mWh ƒ Tracking: < 8mW ELECTRICAL Operating Voltage: 10V – 32VDC Power management modes: Full power, network off, listening mode, deep sleep ENVIRONMENTAL Operation Temperature: -22°F to 167°F (-30°C to 75°C) Storage Temperature: -40°F to 167°F (-40°C to 75°C) Operation Humidity: 20% to 90% (non-condensing) Storage Humidity: 10% to 95% (non-condensing) Designed to meet SAE J1455, SAE 113, and J121 PHYSICAL Dimensions: 6.46in x 3.14in x 1.54in (164mm x 80mm x 39mm) Weight: .93lbs (420g) Internal Cellular and GPS Antenna APPROVALS FCC 47 CFR Part 15, Part 22, and Part 24 6 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co‐located or operating in conjunction with any other antenna or transmitter.

Phillips Connect Technologies, LLC POWER OF ATTORNEY DATE: 2022-11-09 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 We, the undersigned, hereby authorize TA Technology (Shanghai) Co., Ltd. /Yu Hongmei on our behalf, to apply to FCC on our equipment for FCC ID: 2ASKH-SN01. Any and all acts carried out by TA Technology (Shanghai) Co., Ltd. / Yu Hongmei on our behalf shall have the same effect as acts of our own. Sincerely, Signature ： Print name: Doug Reauso

Phillips Connect Technologies, LLC Request for Confidentiality Date: _2022-11-09_ Subject: Confidentiality Request for: _ FCC ID: 2ASKH-SN01 __ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Schematics Short Term Permanent Tune-Up Procedure Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ _ Phillips Connect Technologies, LLC _ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: Doug Reauso (Signature/Title 2 ) (Print name)

E TA Techno This report sh EUT Ap EUT Appearanc ology (Shang hall not be repr ppearanc ce ghai) Co., L roduced except ce td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R220 Pa nghai) Co., Ltd. 07A0680 age 1 of 3 E TA Techno This report sh EUT Appearanc ology (Shang hall not be repr ce ghai) Co., L roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R220 Pa nghai) Co., Ltd. 07A0680 age 2 of 3 E TA Techno This report sh EUT Appearanc ology (Shang hall not be repr ce ghai) Co., L roduced except td. tin full, without b Picture 1: t the written ap a: EUT b: USB Cabl : Constituen pproval of TA Te e ts of EUT Re echnology (Shan eport No.: R220 Pa nghai) Co., Ltd. 07A0680 age 3 of 3

TA Techno This report sh Interna Internal pho ology (Shang hall not be repr al photo oto ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te FCC echnology (Shan C ID: 2ASKH-S Pag nghai) Co., Ltd. SN01 ge 1 of 10 TA Techno This report sh Internal pho ology (Shang hall not be repr oto ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te FCC echnology (Shan C ID: 2ASKH-S Pag nghai) Co., Ltd. SN01 ge 2 of 10 TA Techno This report sh Internal pho ology (Shang hall not be repr oto ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te FCC echnology (Shan C ID: 2ASKH-S Pag nghai) Co., Ltd. SN01 ge 3 of 10 TA Techno This report sh Internal pho ology (Shang hall not be repr oto ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te FCC echnology (Shan C ID: 2ASKH-S Pag nghai) Co., Ltd. SN01 ge 4 of 10 TA Techno This report sh Internal pho ology (Shang hall not be repr oto ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te FCC echnology (Shan C ID: 2ASKH-S Pag nghai) Co., Ltd. SN01 ge 5 of 10 TA Techno This report sh Internal pho ology (Shang hall not be repr oto ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te FCC echnology (Shan C ID: 2ASKH-S Pag nghai) Co., Ltd. SN01 ge 6 of 10 TA Techno This report sh Internal pho ology (Shang hall not be repr oto ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te FCC echnology (Shan C ID: 2ASKH-S Pag nghai) Co., Ltd. SN01 ge 7 of 10 TA Techno This report sh Internal pho ology (Shang hall not be repr oto ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te FCC echnology (Shan C ID: 2ASKH-S Pag nghai) Co., Ltd. SN01 ge 8 of 10 TA Techno This report sh Internal pho ology (Shang hall not be repr oto ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te FCC echnology (Shan C ID: 2ASKH-S Pag nghai) Co., Ltd. SN01 ge 9 of 10 TA Techno This report sh Internal pho ology (Shang hall not be repr oto ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te FCC echnology (Shan C ID: 2ASKH-S Page nghai) Co., Ltd. SN01 e 10 of 10

MPE TEST REPORT Applicant Phillips Connect Technologies, LLC FCC ID 2ASKH-SN01 Product Battery Operated LTE Celluar GPS Tracker Brand Phillips Connect Model 77-7700-13J Report No. R2207A0680-M1V2 Issue Date November 22, 2022 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC 47 CFR Part 1 1.1310. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Prepared by: Wei Fangying Approved by: Fan Guangchang TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 MPE Test Report Report No.: R2207A0680-M1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 2 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ............................................................................................................................... 4 1.1 Notes of the Test Report ......................................................................................................... 4 1.2. Test facility ............................................................................................................................ 4 1.3 Testing Location ...................................................................................................................... 4 1.4 Laboratory Environment .......................................................................................................... 5 2 Description of Equipment under Test .............................................................................................. 6 3 Maximum Tune Up Power and Antenna Gain ................................................................................ 7 4 Test Result ..................................................................................................................................... 8 ANNEX A: The EUT Appearance .......................................................................................................... 11 MPE Test Report Report No.: R2207A0680-M1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 3 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Version Revision description Issue Date Rev.0 Initial issue of report. September 24, 2022 Rev.1 Update data in Page 7 and Page 10. October 21, 2022 Rev.2 Update information. November 22, 2022 Note: This revised report (Report No. R2207A0680-M1V2) supersedes and replaces the previously issued report (Report No. R2207A0680-M1V1). Please discard or destroy the previously issued report and dispose of it accordingly. MPE Test Report Report No.: R2207A0680-M1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 4 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd.The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2. Test facility FCC (Designation number: CN1179, Test Firm Registration Number: 446626) TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform measurements. 1.3 Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China City: Shanghai Post code: 201201 Country: P. R. China Contact: Fan Guangchang Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] MPE Test Report Report No.: R2207A0680-M1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 5 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1.4 Laboratory Environment Temperature Min. = 18°C, Max. = 25 °C Relative humidity Min. = 30%, Max. = 70% Ground system resistance < 0.5 Ω Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards. MPE Test Report Report No.: R2207A0680-M1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 6 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 2 Description of Equipment under Test Client Information Applicant Phillips Connect Technologies, LLC Applicant address 5231 California Avenue, Suite 110 Irvine, CA 92617 Manufacturer Phillips Connect Technologies, LLC Manufacturer address 5231 California Avenue, Suite 110 Irvine, CA 92617 General Technologies Model 77-7700-13J IMEI 866961060198104 Hardware Version Freight-LA P6 Software Version Freight-LA 22-D Date of Testing July 26, 2022 ~ August 8, 2022 Date of Sample Received Date of Sample Received: July 26, 2022 Note: 1. The EUT is sent from the applicant to TA and the information of the EUT is declared by the applicant. 2. All indications of Pass/Fail in this report are opinions expressed by TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. MPE Test Report Report No.: R2207A0680-M1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 7 of 11 This report shall not be reproduced except…

Text truncated - open the document above for the full version.

Prepared by: Xu Ying Approved by: Xu Kai TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 RF TEST REPORT Applicant Phillips Connect Technologies, LLC FCC ID 2ASKH-SN01 Product Battery Operated LTE Celluar GPS Tracker Brand Phillips Connect Model 77-7700-13J Report No. R2207A0680-R1V1 Issue Date November 22, 2022 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 2 (2021)/ FCC CFR 47 Part 22H (2021). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. RF Test Report Report No.: R207A0680-R1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-001R Page 2 of 17 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1. Test Laboratory ...................................................................................................................................... 5 1.1. Notes of the Test Report ............................................................................................................... 5 1.2. Test facility ..................................................................................................................................... 5 1.3. Testing Location ............................................................................................................................ 5 2. General Description of Equipment under Test ....................................................................................... 6 2.1. Applicant and Manufacturer Information ....................................................................................... 6 2.2. General Information ....................................................................................................................... 6 3. Applied Standards .................................................................................................................................. 7 4. Test Configuration .................................................................................................................................. 8 5. Test Case ............................................................................................................................................... 9 5.1. RF Power Output and Effective Radiated Power .......................................................................... 9 5.2. Radiates Spurious Emission ....................................................................................................... 10 6. Test Result ........................................................................................................................................... 13 6.1. RF Power Output and Effective Radiated Power ........................................................................ 13 6.2. Radiates Spurious Emission ....................................................................................................... 14 7. Main Test Instruments ......................................................................................................................... 15 ANNEX A: The EUT Appearance ................................................................................................................ 16 ANNEX B: Test Setup Photos ..................................................................................................................... 17 RF Test Report Report No.: R207A0680-R1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-001R Page 3 of 17 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Version Revision description Issue Date Rev.0 Initial issue of report. October 14, 2022 Rev.1 Update information. November 22, 2022 Note: This revised report (Report No. R2207A0680-R1V1) supersedes and replaces the previously issued report (Report No. R2207A0680-R1). Please discard or destroy the previously issued report and dispose of it accordingly. RF Test Report Report No.: R207A0680-R1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-001R Page 4 of 17 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Summary of measurement results No. Test Case Clause in FCC rules Verdict 1 RF Power Output and Effective Radiated Power 2.1046 22.913(a)(5) PASS 2 Radiates Spurious Emission 2.1053 / 22.917 (a) PASS Date of Testing: July 26, 2022 and August 8, 2022 Date of Sample Received: July 26, 2022 Note: PASS: The EUT complies with the essential requirements in the standard. FAIL: The EUT does not comply with the essential requirements in the standard. All indications of Pass/Fail in this report are opinions expressed by TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. This report only tests RF Power Output and Effective Radiated Power and Radiates Spurious Emission. For other test items, please refer to Module Report (Report No: R1805A0226-R1V3 FCC ID: XMR201606EC21A). RF Test Report Report No.: R207A0680-R1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-001R Page 5 of 17 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1. Test Laboratory 1.1. Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicabl…

Text truncated - open the document above for the full version.

Prepared by: Xu Ying Approved by: Xu Kai TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 RF TEST REPORT Applicant Phillips Connect Technologies, LLC FCC ID 2ASKH-SN01 Product Battery Operated LTE Celluar GPS Tracker Brand Phillips Connect Model 77-7700-13J Report No. R2207A0680-R2V1 Issue Date November 22, 2022 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 2 (2021)/ FCC CFR 47 Part 24E (2021). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. RF Test Report Report No.: R2207A0680-R2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-002R Page 2 of 20 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1. Test Laboratory ...................................................................................................................................... 5 1.1. Notes of the test report .................................................................................................................. 5 1.2. Test facility ..................................................................................................................................... 5 1.3. Testing Location ............................................................................................................................ 5 2. General Description of Equipment under Test ....................................................................................... 6 2.1. Applicant and Manufacturer Information ....................................................................................... 6 2.2. General information ....................................................................................................................... 6 3. Applied Standards .................................................................................................................................. 7 4. Test Configuration .................................................................................................................................. 8 5. Test Case ............................................................................................................................................... 9 5.1. RF Power Output and Effective Isotropic Radiated Power ........................................................... 9 5.2. Radiates Spurious Emission ....................................................................................................... 10 6. Test Results ......................................................................................................................................... 13 6.1. RF Power Output and Effective Isotropic Radiated Power ......................................................... 13 6.2. Radiates Spurious Emission ....................................................................................................... 16 7. Main Test Instruments ......................................................................................................................... 18 ANNEX A: The EUT Appearance ................................................................................................................ 19 ANNEX B: Test Setup Photos ..................................................................................................................... 20 RF Test Report Report No.: R2207A0680-R2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-002R Page 3 of 20 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Version Revision description Issue Date Rev.0 Initial issue of report. October 14, 2022 Rev.1 Update information. November 22, 2022 Note: This revised report (Report No. R2207A0680-R2V1) supersedes and replaces the previously issued report (Report No. R2207A0680-R2). Please discard or destroy the previously issued report and dispose of it accordingly. RF Test Report Report No.: R2207A0680-R2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-002R Page 4 of 20 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Summary of measurement results No. Test Case Clause in FCC rules Verdict 1 RF Power Output and Effective Isotropic Radiated Power 2.1046 24.232(c) PASS 2 Radiates Spurious Emission 2.1053 / 24.238(a) PASS Date of Testing: July 26, 2022 and August 8, 2022 Date of Sample Received: July 26, 2022 Note: PASS: The EUT complies with the essential requirements in the standard. FAIL: The EUT does not comply with the essential requirements in the standard. All indications of Pass/Fail in this report are opinions expressed by TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. This report only tests RF Power Output and Effective Isotropic Radiated Power and Radiates Spurious Emission. For other test items, please refer to Module Report (Report No: R1805A0226-R2V3 FCC ID: XMR201606EC21A). RF Test Report Report No.: R2207A0680-R2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-002R Page 5 of 20 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1. Test Laboratory 1.1. Notes of the test report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of t…

Text truncated - open the document above for the full version.

Prepared by: Xu Ying Approved by: Xu Kai TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 RF TEST REPORT Applicant Phillips Connect Technologies, LLC FCC ID 2ASKH-SN01 Product Battery Operated LTE Celluar GPS Tracker Brand Phillips Connect Model 77-7700-13J Report No. R2207A0680-R3V1 Issue Date November 22, 2022 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 2 (2021)/ FCC CFR47 Part 27C (2021). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. RF Test Report Report No.: R2207A0680-R3V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003R Page 2 of 25 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1 Test Laboratory ............................................................................................................................ 5 1.1 Notes of the Test Report ......................................................................................................... 5 1.2. Test facility ............................................................................................................................ 5 1.3 Testing Location ...................................................................................................................... 5 2 General Description of Equipment under Test .......................................................................... 6 2.1 Applicant and Manufacturer Information.................................................................................. 6 2.2 General information ................................................................................................................. 6 3 Applied Standards ........................................................................................................................ 8 4 Test Configuration ........................................................................................................................ 9 5 Test Case ..................................................................................................................................... 10 5.1 RF Power Output and Effective Isotropic Radiated Power .................................................... 10 5…

Text truncated - open the document above for the full version.