2ASKL-DS08DEEPSCENT LOUNGE

FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IEEE 802.11b, 802.11g, 802.11n_HT20 operation of this product in the USA is firmware-limited to channels 1 through 11. IEEE 802.11n_HT40 operation of this product in the USA is firmware-limited to channels 3 through 9. Industry Canada Statement This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-247 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage pr judiciable, et (2) ce dispositif doit accepter tout brouillage re u, y compris un brouillage susceptible de provoquer un fonctionnement ind sirable. Industry Canada Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. D claration d’exposition aux radiations Cet quipement est conforme aux limites d’exposition aux rayonnements IC tablies pour un environnement non con tr l . Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Un official information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: Th e Agent for Process of Service: •cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) •cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) •Agent can be Individual Entity or a Company Entity •Agent Entity must be located in US, US address/phone •Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) •Agent letter does not have to be FCC ID specific, can be general Agent for Grantee Fo r devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. DeepScent Inc. #408, 99, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea Tel : +82-70-4230-2094, Fax : +82-504-341-9688 U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: F CC Certification – Section 2.911(d)(7) Information Designate d U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: January 26, 2024 Signed by (Printed Name/Title): Nathan Grinager / Co-President *This letter is valid indefinitely for all applications submitted within the period of 01/26/2024 – 01/25/2029 The Applicant confirms its explicit c onsent and acknowledges t hat t hey must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges t heir r esponsibility to inform the FCC whenever t he Designated U.S. Agent information above changes. Applicant Company name: DeepScent Inc. Grantee FRN: 0028264802 FCC ID: 2ASKL-DS08 Contact Name: Ki Back, Jung Street Address: 99, Daehak-ro, Yuseong-gu, City /Province/Zip: Daejeon, South Korea Telephone No: +82-70-4230-2094 Email: [email protected] Applicant Signature: Date: January 26, 2024 Signed by (Printed Name/Title): Ki Back, Ju ng / Manager

DeepScent Inc. 99, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea Tel: +82-10-2688-9688 Certification Attestation Statements Attn: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: January 29, 2024 FCC ID: 2ASKL-DS08 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing DeepScent Inc. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: (Please add if applicable) : We are not applicable. Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing DeepScent Inc. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is / ▣ - is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Name: KiBack Jung Title: CEO Company: DeepScent Inc. Tel # : +82-10-2688-9688 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters should be placed on appropriate letterhead.

DeepScent Inc. 99, Daehak-ro, Yuseong-gu, Daejeon, South Korea Tel: +82-10-2688-9688 Date: January 24, 2024 F ederal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Chief, Certification and Engineering Bureau Industry Canada 1241 Clyde Avenue Ottawa, Ontario Canada K2C 1Y3 Re garding FCC Application FCC ID : 2ASKL-DS08 IC number : 31697-DSL2401 W e, DeepScent Inc., declare that the device does not support channel 12 ~ 13 in 2.4 GHz band. The firmware setting is not accessible by end users and/or unauthorized 3rd parties. Signature: Kiback Jung / Manager DeepScent In c.

Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Product Description: Model/Brand Name: FCC ID Variant Model: FCC Rule Part(s): Applicant Name: Applicant Address: Manufacturer Name: Manufacturer Address: DEEPSCENT LOUNGE DS08_019220001 2ASKL-DS08 - FCC Part 15 Subpart B Class B Part 15.107(b) & Part 15.109(b) DeepScent Inc. 99, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea DeepScent Inc. 99, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea DEEPSCENT LOUNGE, Model DS08_019220001 has been tested in accordance with the measurement procedures specified in FCC Part 15 Subpart B class B and has been shown to be complied with the electromagnetic emission limits specified in FCC Rule Part 15 Subpart B class B. A testing of the sample product has been valid for the sample tested based on the reference test report. Responsible Party – U.S. Contact Information Company Name: Approve-IT, Inc. Company Address: 8011 34 th Ave South, Suite 342, Bloomington, MN55425 Telephone or Internet : 651-247-1678 contact information : [email protected] Date of Issue: January 24, 2024 President: Kiback, Jung Signature: DeepScent Inc. Address : 99, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea Tel: +82- 10-2688-9688

DeepScent Inc. 99, Daehak-ro, Yuseong-gu, #408, Daejeon, South Korea, 34134 Tel: +82-10-2688-9688 Date: January 24, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Chief, Certification and Engineering Bureau Industry Canada 1241 Clyde Avenue Ottawa, Ontario Canada K2C 1Y3 Confidentiality Request regarding application for certification of FCC ID : 2ASKL-DS08 IC number : 31697-DSL2401 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules and IC regulation, we hereby request confidential treatment of information accompanying this application as outlined below: PERMANENT Exhibit Type File Name Part List Part List.pdf Schematics Diagram(s) Schematic.pdf Operation description Operation description.pdf Block diagram Block diagram.pdf And the above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Kiback Jung / Manager DeepScent Inc.

DeepScent Inc. 99, Daehak-ro, Yuseong-gu, #408, Daejeon, South Korea, 34134 Tel: +82-10-2688-9688 Date: January 24, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Chief, Certification and Engineering Bureau Industry Canada 1241 Clyde Avenue Ottawa, Ontario Canada K2C 1Y3 FCC ID : 2ASKL-DS08 IC number : 31697-DSL2401 To whom it may concern: I, the undersigned, hereby authorize Young-Jin, Lee of KES Co., Ltd. and hereafter referred to as KES Co., Ltd., to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Young-Jin, Lee of KES Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing KES Co., Ltd. as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; DeepScent Inc. 99, Daehak-ro, Yuseong-gu, #408, Daejeon, South Korea, 34134 Tel: +82-10-2688-9688 f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Kiback Jung / Manager DeepScent Inc. REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

Model No.: DS08_019220001 Page 1 of 2 External photos Model No.: DS08_019220001 Page 2 of 2

Model No.: DS08_019220001 Page 1 of 1 Label photo

Model No.: DS08_019220001 Page 1 of 2 Internal photos Loop Antenna Model No.: DS08_019220001 Page 2 of 2 Blank PCB Antenna

FCC ID : 2ASKL-DS08 Page 1 of 2 RF exposure According to FCC part 1.1310 : The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in § 1.1307(b) Limits for Maximum Permissible Exposure (MPE) f= frequency in ㎒ Friis transmission formula: Pd = (Pout×G)/(4×pi×R 2 ) Where, Pd = power density in ㎽/㎠ Pout = output power to antenna in ㎽ G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd the limit of MPE, 1 ㎽/㎠. If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Frequency range (㎒) Electric field strength(V/m) Magnetic field strength (A/m) Power density (㎽/㎠) Average time (A) Limits for Occupational / Control Exposures 0.3 – 3.0 614 1.63 *(100) 6 3.0 – 30 1842/f 4.89/f *(900/f 2 ) 6 30 - 300 61.4 0.163 1.0 6 300 – 1 500 -- -- f/300 6 1 500 - 100000 -- -- 5 6 (B) Limits for General Population / Uncontrol Exposures 0.3 – 1.34 614 1.63 *(100) 30 1.34 – 30 824/f 2.19/f *(180/f 2 ) 30 3.0 - 300 27.5 0.073 0.2 30 300 – 1 500 -- -- f/1500 30 1 500 – 100 000 -- -- 1 30 FCC ID : 2ASKL-DS08 Page 2 of 2 Results Operation mode Frequency (㎒) Max Tune-up Average Power(㏈m) Antenna gain (㏈i) Power density at 20 ㎝(㎽/㎠) Limit (㎽/㎠) BDR 1 Mbps 2 402 ~ 2 480 3.00 3.40 0.000 87 1 EDR 3 Mbps 2 402 ~ 2 480 3.00 0.000 87 1 LE 1Mbps 2 402 ~ 2 480 3.00 0.000 87 1 802.11b 2 412 ~ 2 462 11.00 0.005 48 1 802.11g 2 412 ~ 2 462 9.00 0.003 46 1 802.11n_HT20 2 412 ~ 2 462 9.00 0.003 46 1 802.11n_HT40 2 422 ~ 2 452 8.00 0.002 75 1 Operation mode Frequency (㎒) Reading at 3 m (㏈㎶) Correction factor (㏈/m) Result at 3 m (㏈㎶/m) Result at 3 m (V/m) Electric field strength at 20 ㎝ (V/m) Limit (V/m) RFID 13.562 ㎒ 29.04 19.79 48.73 0.000 27 23.520 27 60.75 Note. Electric field strength at 20 ㎝ (V/m) = Result at 3 m (V/m) + Distance correction factor* *Distance correction factor = 20 * log (measure distance (3 m) / evaluate distance (0.2 m = 20 cm)) = 23.52

The authenticity of the test report, contact [email protected] Report No. : KES-RF240184 Page40/87 KES-QP16-F01(00-23-01-01)KES Co., Ltd. Test results (Above 1 000㎒) Mode:LE 1 Mbps Distance of measurement:3 meter Channel:00 -Spurious Frequency (㎒) Level (㏈㎶) Detect mode Ant. Pol. (H/V) CF (㏈) DCF (㏈) Field strength (㏈㎶/m) Limit (㏈㎶/m) Margin (㏈) 1 001.4045.85PeakV-9.39-36.4674.0037.54 1 018.8045.94PeakH-9.28-36.6674.0037.34 1 661.3645.64PeakV-4.77-40.8774.0033.13 -Band edge Frequency (㎒) Level (㏈㎶) Detect mode Ant. Pol. (H/V) CF (㏈) DCF (㏈) Field strength (㏈㎶/m) Limit (㏈㎶/m) Margin (㏈) 2 323.3243.79PeakH-0.56-43.2374.0030.77 2 381.2243.64PeakV-0.37-43.2774.0030.73 Restricted band // Horizontal // PeakRestricted band // Vertical // Peak The authenticity of the test report, contact [email protected] Report No. : KES-RF240184 Page41/87 KES-QP16-F01(00-23-01-01)KES Co., Ltd. Horizontal // Peak for 1㎓to 3㎓Vertical // Peak for 1㎓to 3㎓ Horizontal // Peak for 3㎓to 18㎓Vertical // Peak for 3㎓to 18㎓ Note. 1. No spurious emission were detected above 3㎓. 2. Average test would be performed if the peak result were greater than the average limit. The authenticity of the test report, contact [email protected] Report No. : KES-RF240184 Page42/87 KES-QP16-F01(00-23-01-01)KES Co., Ltd. Mode:LE 1 Mbps Distance of measurement:3 meter Channel:20 -Spurious Frequency (㎒) Level (㏈㎶) Detect mode Ant. Pol. (H/V) CF (㏈) DCF (㏈) Field strength (㏈㎶/m) Limit (㏈㎶/m) Margin (㏈) 1 021.7046.55PeakH-9.27-37.2874.0036.72 1 661.4045.32PeakV-4.77-40.5574.0033.45 Horizontal // Peak for 1㎓to 3㎓Vertical // Peak for 1㎓to 3㎓ Horizontal // Peak for 3㎓to 18㎓Vertical // Peak for 3㎓to 18㎓ Note. 1. No spurious emission were detected above 3㎓. 2. Average test would be performed if the peak result were greater than the average limit. The authenticity of the test report, contact [email protected] Report No. : KES-RF240184 Page43/87 KES-QP16-F01(00-23-01-01)KES Co., Ltd. Mode:LE 1 Mbps Distance of measurement:3 meter Channel:39 -Spurious Frequency (㎒) Level (㏈㎶) Detect mode Ant. Pol. (H/V) CF (㏈) DCF (㏈) Field strength (㏈㎶/m) Limit (㏈㎶/m) Margin (㏈) 1 018.8045.35PeakH-9.28-36.0774.0037.93 1 664.3044.71PeakV-4.74-39.9774.0034.03 -Band edge Frequency (㎒) Level (㏈㎶) Detect mode Ant. Pol. (H/V) CF (㏈) DCF (㏈) Field strength (㏈㎶/m) Limit (㏈㎶/m) Margin (㏈) 2 491.1343.74PeakV-0.25-43.4974.0030.51 2 496.6443.38PeakH-0.25-43.1374.0030.87 Restricted band // Horizontal // PeakRestricted band // Vertical // Peak The authenticity of the test report, contact [email protected] Report No. : KES-RF240184 Page44/87 KES-QP16-F01(00-23-01-01)KES Co., Ltd. Horizontal // Peak for 1㎓to 3㎓Vertical // Peak for 1㎓to 3㎓ Horizontal // Peak for 3㎓to 18㎓Vertical // Peak for 3㎓to 18㎓ Note. 1. No spurious emission were detected above 3㎓. 2. Average test would be performed if the peak result were greater than the average limit. The authenticity of the test report, contact [email protected] Report No. : KES-RF240184 Page45/87 KES-QP16-F01(00-23-01-01)KES Co., Ltd. Test results (18㎓to 30㎓) Mode:LE 1 Mbps Distance of measurement:3 meter Channel:39 (Worst case) Horizontal PeakVertical Peak Note. No spurious emission were detected above 18㎓. The authenticity of the test report, contact [email protected] Report No. : KES-RF240184 Page46/87 KES-QP16-F01(00-23-01-01)KES Co., Ltd. Mode:802.11b Distance of measurement:3 meter Channel:01 -Spurious Frequency (㎒) Level (㏈㎶) Detect mode Ant. Pol. (H/V) CF (㏈) DCF (㏈) Field strength (㏈㎶/m) Limit (㏈㎶/m) Margin (㏈) 1 007.2445.82PeakH-9.36-36.4674.0037.54 1 131.7044.82PeakV-8.57-36.2574.0037.75 4 834.0040.85PeakH6.51-47.3674.0026.64 4 834.0043.97PeakV6.51-50.4874.0023.52 -Band edge Frequency (㎒) Level (㏈㎶) Detect mode Ant. Pol. (H/V) CF (㏈) DCF (㏈) Field strength (㏈㎶/m) Limit (㏈㎶/m) Margin (㏈) 2 389.3548.89PeakH-0.34-48.5574.0025.45 2 390.0045.42PeakV-0.34-45.0874.0028.92 Restricted band // Horizontal // PeakRestricted band // Vertical // Peak The authenticity of the test report, contact [email protected] Report No. : KES-RF240184 Page47/87 KES-QP16-F01(00-23-01-01)KES Co., Ltd. Horizontal // Peak for 1㎓to 3㎓Vertical // Peak for 1㎓to 3㎓ Horizontal // Peak for 3㎓to 18㎓Vertical // Peak for 3㎓to 18㎓ Note. 1. Average test would be performed if the peak result were greater than the average limit. The authenticity of the test report, contact [email protected] Report No. : KES-RF240184 Page48/87 KES-QP16-F01(00-23-01-01)KES Co., Ltd. Mode:802.11b Distance of measurement:3 meter Channel:06 -Spurious Frequency (㎒) Level (㏈㎶) Detect mode Ant. Pol. (H/V) CF (㏈) DCF (㏈) Field strength (㏈㎶/m) Limit (㏈㎶/m) Margin (㏈) 1 010.1045.11PeakH-9.34-35.7774.0038.23 1 120.1044.52PeakV-8.65-35.8774.0038.13 4 878.0041.29PeakH6.83-48.1274.0025.88 4 878.0043.46PeakV6.83-50.2974.0023.71 Horizontal // Peak for 1㎓to 3㎓Vertical // Peak for 1㎓to 3㎓ Horizontal // Peak for 3㎓to 18㎓Vertical // Peak for 3㎓to 18㎓ Note. 1. Average test would be performed if the peak result were greater than the average limit. The authenticity of the test report, contact [email protected] Report No. : KES-RF240184 Page49/87 KES-QP16-F01(00-23-01-01)KES Co., Ltd. Mode:802.11b Distance of measurement:3 meter Channel:11 -Spurious Frequency (㎒) Level (㏈㎶) Detect mode Ant. Pol. (H/V) CF (㏈) DCF (㏈) Field strength (㏈㎶/m) Limit (㏈㎶/m) Margin (㏈) 1 024.6044.85PeakH-9.25-35.6074.0038.40 1 664.3045.34PeakV-4.74-40.6074.0033.40 4 921.0044.18PeakH7.15-51.3374.0022.67 4 921.0042.54PeakV7.15-49.6974.0024.31 -Band edge Frequency (㎒) Level (㏈㎶) Detect mode Ant. Pol. (H/V) CF (㏈) DCF (㏈) Field strength (㏈㎶/m) Limit (㏈㎶/m) Margin (㏈) 2 488.0145.28PeakV-0.25-45.0374.0028.97 2 488.0845.18PeakH-0.25-44.9374.0029.07 Restricted band // Horizontal // PeakRestricted band // Vertical // Peak The authenticity of the test report, contact [email protected] Report No. : KES-RF240184 Page50/87 KES-QP16-F01(00-23-01-01)KES Co., Ltd. Horizontal // Peak for 1㎓to 3㎓Vertical // Peak for 1㎓to 3㎓ Horizontal // Peak for 3㎓to 18㎓Vertical // Peak for 3㎓to 18㎓ Note. 1. Average tes…

Text truncated - open the document above for the full version.

TEST REPORT Report No. : KES-RF240184 Page1/87 KES Co., Ltd. #3002, #3503, #3701, 40, Simin-daero365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Republic of Korea Tel : +82-31-425-6200, Fax : +82-31-425-6200 The authenticity of the test report, contact [email protected] KES-QP16-F01(00-23-01-01)KES Co., Ltd. FCC/IC TEST REPORT 1. Client ○ Name : DeepScent Inc. ○ Address : 34134 99, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea 2. Sample Description ○ Product item : DEEPSCENT LOUNGE ○ Model name : DS08_019220001 ○ Manufacturer etc. : DeepScent Inc. 3. Date of test :2024.03.27 ~ 2024.04.11 4. Location of Test :Permanent Testing LabOn Site Testing ○ Adress : 473-21, Gayeo-ro, Yeoju-si, Gyeonggi-do, Korea 5. Test method used :Part 15.247 & RSS-247 6. Test result :PASS The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This laboratory is not accredited for the test results marked*. This test report is not related to KOLAS accreditation. Affirmation Tested byTechnical Manager Name :Bong-Seok Kim(Signature)Name :Yeong-Jun Cho(Signature) 2024. 04. 30. KES Co., Ltd. Accredited by KOLAS, Republic of KOREA The authenticity of the test report, contact [email protected] Report No. : KES-RF240184 Page2/87 KES-QP16-F01(00-23-01-01)KES Co., Ltd. REPORT REVISION HISTORY DateTestReport No.Revision History 2024.04.30.KES-RF240184Initial This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. This document may be altered or revised by KES Co., Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by KES Co., Ltd. will constitute fraud and shall nullify the document. Use of uncertainty of measurement for decisions on conformity (decision rule): No decision rule is specified by the standard, when comparing the measurement result with the applicable limit according to the specification in that standard. The decisions on conformity are made without applying the measurement uncertainty(“simple acceptance” decision rule, previously known as “accuracy method”). ☐ Other (to be specified, for example when required by the standard or client) The authenticity of the test report, contact [email protected] Report No. : KES-RF240184 Page3/87 KES-QP16-F01(00-23-01-01)KES Co., Ltd. TABLE OF CONTENTS 1.General information ................................................................................................................................... 4 1.1.EUT description .......................................................................................................................... 4 1.2.Test configuration........................................................................................................................ 5 1.3.Information about derivative model ............................................................................................ 5 1.4.Accessory information ................................................................................................................ 5 1.5.Sample calculation ..................................................................................................................... 5 1.6.Measurement Uncertainty .......................................................................................................... 5 1.7.Frequency/channel operations ................................................................................................... 6 2.Summary of tests ....................................................................................................................................... 7 3.Test results ................................................................................................................................................. 8 3.1.99% Occupied Bandwidth .......................................................................................................... 8 3.2.6㏈bandwidth ........................................................................................................................ 14 3.3.Output power ............................................................................................................................ 20 3.4.Power spectral density ............................................................................................................. 22 3.5.Radiated restricted band and emissions .................................................................................. 28 3.6.Conducted spurious emissions & band edge ........................................................................... 70 3.7.AC conducted emissions .......................................................................................................... 82 3.8.Antenna Requirement............................................................................................................... 86 Appendix A. Measurement equipment.......................................................................................................... 87 The authenticity of the test report, contact [email protected] Report No. : KES-RF240184 Page4/87 KES-QP16-F01(00-23-01-01)KES Co., Ltd. 1.General information ApplicantDeepScent Inc. Applicant address34134 99, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea Test siteKES Co., Ltd. Test site address#3002, #3503, #3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do,14057,Republic of Korea 473-21, Gayeo-ro, Yeoju-si, Gyeonggi-do, Korea Test FacilityFCC Accreditation Designation No.: KR0100, Registration No.: 444148 Standard(s)Part 15.247 IC rule part(s):IC : RSS-247 FCC ID:2ASKL-DS08 IC ID:31697-DSL2401 Test device serial No.ProductionPre-productionEngineering 1.1.EUT …

Text truncated - open the document above for the full version.