2ASN6-XB-001Wireless Charging Power bank

Product introduction: Thank you for choosing Xbank. The Xbank allows you to charge your devices during emergency. Enjoy the ultimate wireless charging experience with Xbank + Xcase on the go. Product Features: Smart integrated foot stick for desktop use (storage-able). SMAP-WPC work with Xcase for ultimate wireless chargin experience on the go. Charge multiple devices simultaneously. LED for battery and charging status information. OVP, OCP, OTP, FOC User manual To charge Xbank: Please take out the USB-A to USB-Micro charging cable (enclosed) and connect the Micro USB port with Xbank while USB-A with USB power sources to start charging. Upon completion, the battery icon will flash and the battery capacity shows in Arabic numbers. Please note that you can also use USB-C cable to charge Xbank. The SMAP-WPC Technology brings perfect charging coil alignment for Xbank and Xcase, which means the utmost charging efficiency and least loss. Product Specifications: Product Name: Wireless Charging Power bank Model: XB-001 Wireless Charging Protocol: WPC1.1.2 DC Input 5V2A/ 9V1.6A Wireless Charging output: 10W Total DC output: 18W Effective charging distance: 0~10 mm (0.3 in) Battery Capacity: 10000 mAh Package Contents: Xbank x 1 USB-A to USB-micro charging cable x 1 Users manual x 1 To power off the Xbank. Long press the power button for 2 seconds and the Xbank will power off. To charge your phones/ USB devices with USB ports. 1. Plug your charging cable to Xbank USB-A/ USB -C ports while the other end to your phones/ devices. 2. The Xbank will automatically power on and start charging your phones/ devices. 3. You can charge multiple devices simultaneously but please note that maximum power limit is 18W in total. To charge your iPhone (with Xcase) wirelessly 1. Wear Xcase on your iPhone. 2. Press power button to power on Xbank 3. Rest your iPhone (back side of your iPhone on Xbank logo side) on Xbank, and it will automatically magnet at correct charging location. 4. Your iPhone will start charging. Cautions: Before charging Xbank, please ensure that input voltage is correct. Slightly heat up during charging is normal Please do not drop, bump, or disassemble the product without permission for maintenance. https://moxiecorp.com/ Product appearance MAXSE CORPORATION Address: 10F.-1, No. 34, Sec. 1, Fuxing S. Rd., Zhongshan Dist., Taipei City 104, Taiwan (R.O.C.) Customer Service Hotline: +886-02-2773-9005 Website: https://moxiecorp.com/ Tytpe C QC3.0 Tytpe A 5V2A Tytpe A QC3.0 Micro USB 5V2A OUT IN IN/OUT OUT Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not ins talled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is en couraged to try to correct the interference by one or more of the following measures: ●Reorient or relocate the receiving antenna. ●Increase the separation between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to which the re ceiver is connected. ●Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this device not expressly approved by Moxie corporation may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthoriz ed modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Moxie corporation 10F.-1, No.34, Sec.1, Fuxing S.Rd., Zhongshan Dist., Taipei City 104, Taiwan(R.O.C.) Tel: +886-2-2773-9005 Fax: +886-2-2773-9005 Series Models Description Date: 03-09-2020 FCC ID: 2ASN6-XB-001 Attn: Director of Certification We, Moxie corporation Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only color and model number is different for these model: Product name: Wireless Charging Power bank Model no.: XB-001, XB-002, XB-003, XB-004, XB-005 Sincerely, Name: Akio Lin Company: Moxie corporation Address: 10F.-1, No.34, Sec.1, Fuxing S.Rd., Zhongshan Dist., Taipei City 104, Taiwan(R.O.C.) Phone: +886-2-2773-9005 Fax: +886-2-2773-9005 E-Mail: [email protected]

DATE 2020-03-10 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC I D: 2ASN6-XB-001 Product Name: Wireless Charging Power bank Request for C onfidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) •Schematics and Bom •Block diagram •Operation d escription These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name: Ak io Lin Title: Manger Company: Moxie corporation

FCC ID Label Information Label location: FCC ID: 2ASN6‐XB‐001

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 Fax: +86-755-26636041 RF EXPOSURE REPORT Report Reference No. ..................... : CTL1911076011-MPE Compiled by ( position+printed name signature) ... : Happy Guo (File administrators) Supervised by ( position+printed name+signature) .. : Nice Nong (Test Engineer) Approved by ( position+printed name+signature) .. : Ivan Xie (Manager) Applicant’s name ............................ : Moxie corporation Address............................................. : 10F.-1, No.34, Sec.1, Fuxing S.Rd., Zhongshan Dist., Taipei City 104, Taiwan(R.O.C.) Testing Laboratory Name .............. : Shenzhen CTL Testing Technology Co., Ltd. Address............................................. : Floor 1-A, Baisha Technology Park, No. 3011, Shahexi Road, Nanshan, Shenzhen 518055 China. Test specification .......................... : Standard ........................................... : FCC CFR 47 part1, 1.1307(b), 1.1310 TRF Originator .................................. : Shenzhen CTL Testing Technology Co., Ltd. Master TRF ....................................... : Dated 2011-01 Test item description ..................... : Wireless Charging Power bank FCC ID.......................................: 2ASN6-XB-001 Trade Mark ....................................... : N/A Model/Type reference ....................... : XB-001 List Model(s) ..................................... : XB-002, XB-003, XB-004, XB-005 Transmit Frequency ......................... : 115~205KHz Antenna type .................................... : Loop antenna Date of receipt of test item ................. : Nov. 09, 2019 Date of sampling ................................. : Nov. 09, 2019 Date of Test Date ............................... : Nov. 09, 2019–Dec. 17, 2019 Data of Issue ...................................... : Dec. 23, 2019 Result.................................................. : Pass Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. V1.0 Page 2 of 13 Report No.: CTL1911076011-MPE T E S T R E P O R T Test Report No. : CTL1911076011-MPE Dec. 23, 2019 ________________________________________________________________________________________ Date of issue Equipment under Test : Wireless Charging Power bank Model /Type : XB-001 Listed Models : XB-002, XB-003, XB-004, XB-005 Applicant : Moxie corporation Address : 10F.-1, No.34, Sec.1, Fuxing S.Rd., Zhongshan Dist., Taipei City 104, Taiwan(R.O.C.) Manufacturer : Shenzhen le chuang sheng technology CO.,Ltd Address : 6 Floor, Building B, Phase 3, Fuan Industrial Zone, Fengtang Avenue, Fuyong Street, Baoan District, Shenzhen City, China. Test Result PASS The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the issuing testing laboratory. V1.0 Page 3 of 13 Report No.: CTL1911076011-MPE Contents 1. SUMMARY ............................................................................. 4 1.1. EUT configuration 4 1.2 Test Mode 4 2. TEST ENVIRONMENT ............................................................... 4 2.1. Address of the test laboratory 4 2.2. Test Facility 4 2.3. Environmental conditions 5 2.4. Statement of the measurement uncertainty 5 3. METHOD OF MEASUREMENT .................................................... 5 3.1. Applicable Standard 5 3.2. Limit 5 4. TEST RESULT ........................................................................ 6 4.1. Test Setup 6 4.2. Test Equipment 6 4.3. Measurement Procedure 6 4.4. Equipment Approval Considerations 7 4.5. E and H field Strength 8 5. TEST SETUP PHOTO .............................................................. 10 V1.0 Page 4 of 13 Report No.: CTL1911076011-MPE 1. SUMMARY 1.1. EUT configuration Kind of Product: Wireless Charging Power bank Model Name: XB-001 DC Input : 5V2A / 9V1.6A Wireless Charging output: 10W Frequency Range: 115-205KHz Antenna Type: Loop Antenna FCC ID: 2ASN6-XB-001 1.2 Test Mode Test Mode Mode1 Battery powered Mode2 USB power supply (Other voltages have been tested and 9V-1.6 A is the worst mode.) 2. TEST ENVIRONMENT 2.1. Address of the test laboratory Shenzhen CTL Testing Technology Co., Ltd. Floor 1-A, Baisha Technology Park, No.3011, Shahexi Road, Nanshan District, Shenzhen, China 518055 The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.10 (2013) and CISPR Publication 22. 2.2. Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L7497 Shenzhen CTL Testing Technology Co., Ltd. has been assessed and proved to be in compliance with CNAS- CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC 17025: 2005 General Requirements) for the Competence of Testing and Calibration Laboratories. A2LA-Lab Cert. No. 4343.01 Shenzhen CTL Testing Technology Co., Ltd, EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2005 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. IC Registration No.: 9618B CAB identifier: CN0041 The 3m alternate test site of Shenzhen CTL Testing Technology Co., Ltd. EMC Laboratory has been registered by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements with Registration No.: 9618B on Jan. 22, 2019. FCC-Registration No.: …

Text truncated - open the document above for the full version.

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 E-mail: [email protected] TEST REPORT FCC PART 15 SUBPART C Report Reference No.: CTL1911076011-WF Compiled by: ( position+printed name+signature) Happy Guo (File administrators) Tested by: ( position+printed name+signature) Nice Nong (Test Engineer) Approved by: ( position+printed name+signature) Ivan Xie (Manager) Product Name .............................. : Wireless Charging Power bank Model/Type reference ................. : XB-001 List Model(s) ................................ : XB-002, XB-003, XB-004, XB-005 Trade Mark ................................... : N/A FCC ID ........................................ : 2ASN6-XB-001 Applicant’s name ........................ : Moxie corporation Address of applicant .................. : 10F.-1, No.34, Sec.1, Fuxing S.Rd., Zhongshan Dist., Taipei City 104, Taiwan(R.O.C.) Test Firm ...................................... : Shenzhen CTL Testing Technology Co., Ltd. Address of Test Firm .................. : Floor 1-A, Baisha Technology Park, No.3011, Shahexi Road, Nanshan District, Shenzhen, China 518055 Test specification ........................ : Standard ........................................ : FCC Rules Part 15.207,15.209, 15.215(c) ANSI C63.10-2013 TRF Originator .............................. : Shenzhen CTL Testing Technology Co., Ltd. Master TRF ................................... : Dated 2011-01 Date of Receipt ............................ : Nov. 09, 2019 Date of sampling ......................... : Nov. 09, 2019 Date of Test Date ......................... : Nov. 09, 2019-Mar. 14, 2020 Data of Issue ................................ : Mar. 14, 2020 Result ........................................... : Pass Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. V1.0 Page 2 of 24 Report No.: CTL1911076011-WF TEST REPORT Test Report No. : CTL1911076011-WF Mar. 14, 2020 Date of issue Equipment under Test : Wireless Charging Power bank Model /Type : XB-001 Listed Models : XB-002, XB-003, XB-004, XB-005 Applicant : Moxie corporation Address : 10F.-1, No.34, Sec.1, Fuxing S.Rd., Zhongshan Dist., Taipei City 104, Taiwan(R.O.C.) Manufacturer : Shenzhen le chuang sheng technology CO.,Ltd Address : 6 Floor, Building B, Phase 3, Fuan Industrial Zone, Fengtang Avenue, Fuyong Street, Baoan District, Shenzhen City, China. Test result Pass * *In the configuration tested, the EUT complied with the standards specified page 5. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the issuing testing laboratory. V1.0 Page 3 of 24 Report No.: CTL1911076011-WF ** Modified History ** Revisions Description Issued DataReport No. Remark Version 1.0 Initial Test Report Release2020-03-14 CTL1911076011-WF Tracy Qi V1.0 Page 4 of 24 Report No.: CTL1911076011-WF Table of Contents Page 1. SUMMARY............................................................................................................................................................ 5 1.1. TEST STANDARDS ..................................................................................................................................................... 5 1.2. TEST DESCRIPTION ........................................................................................................................................................ 5 1.3. TEST FACILITY .............................................................................................................................................................. 6 1.4. STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................................... 6 2. GENERAL INFORMATION ....................................................................................................................................... 8 2.1. ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 8 2.2. GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 8 2.3. SPECIAL ACCESSORIES ................................................................................................................................................... 8 2.4. EQUIPMENTS USED DURING THE TEST .............................................................................................................................. 9 2.5. RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................................................ 9 2.6. MODIFICATIONS ........................................................................................................................................................... 9 3. TEST CONDITIONS AND RESULTS ......................................................................................................................... 10 3.1. CONDUCTED EMISSIONS TEST ....................................................................................................................................... 10 3.2. RADIATED EMISSIONS .................................................................................................................................................. 13 3.3. 20DB BANDWIDTH .........................................................................................…

Text truncated - open the document above for the full version.