2ASP8NITRON65Phone

MAXWEST COMMUNICATION LIMITED ADD: FLAT/RM 707 7/F, FORTRESS TOWER 250 KING'S ROAD,NORTH POINT, HONG KONG TEL: 0086-755-83453835 FAX: 0086-755-83453835 E-mail: [email protected] FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We,MAXWEST COMMUNICATION LIMITED, hereby authorize Bay Area Compliance Laboratories Corp.(Dongguan) to act as a laboratory for testing and test report generation for the following project(s): (Product description: Phone, model name: NITRO N65, FCC ID: 2ASP8NITRON65） The product only supports BT(GFSK, π/4-DQPSK, 8DPSK), BLE 1M,2 .4G WIFI(2412-2462MHz),GSM/GPRS/EDGE: 850/1900, WCDMA Band 2/5 , LTE B and 2/4/5/7/38, FM(VHF band II: 87.5~108 MHz, only RX) , GPS L1/BDS B1/ GLONASS G1/SBAS were actived in USA. We also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission's regulations will have affixed to it a label identical to that submitted f or approval with this application. Sincerely, Signature: Printed Name: Rita Yu Title: Manager Date: 2026-05-08

ATTESTATION STATEMENT MAXWEST COMMUNICATION LIMITED Add: FLAT/RM 707 7/F, FORTRESS TOWER 250 KING'S ROAD,NORTH POINT,HONG KONG Tel: 0086-755-83453835 FAX: 0086-755-83453835 Email: [email protected] Date: 2026-05-08 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(5)(i), (ii) Filing FCC I D: 2ASP8NITRON65 Signed by (printed name): Rita Yu Title: Manager MAXWEST COMMUNICATION LIMITED, certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. And MAXWEST COMMUNICATION LIMITED, certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. MAXWEST COMMUNICATION LIMITED certifies that the equipment does not use Kaspersky's software information. Sincerely,

U.S. AGENT LETTER OF ATTESTATION Date: 2026-05-08 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2ASP8NITRON65 MAXWEST COMMUNICATION LIMITED certifies that, as of the date of the filing of the application, OC CONTINENTAL SOURCE INC is our designated U.S. agent for service of process for the above referenced FCC ID. MAXWEST COMMUNICATION LIMITED accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. OC CONTINENTAL SOURCE INC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: OC CONTINENTAL SOURCE INC Address:13772 GOLDEN WEST ST. UNIT. 618 WESTMINSTER, CA. 92683-3123,United States FRN:0033598186 Tel.: 714-862-5327 Email: [email protected] Signed by (printed name): sabah mus Applicant:MAXWEST COMMUNICATION LIMITED Add:FLAT/RM 707 7/F, FORTRESS TOWER 250 KING'S ROAD,NORTH POINT, HONG KONG FRN:0028314615 Tel:0086-755-83453835 Email:[email protected] Signed by (printed name):Rita Yu Signature: Signature:

QA-FR-170-B MAXWEST COMMUNICATION LIMITED Add: FLAT/RM 707 7/F, FORTRESS TOWER 250 KING'S ROAD,NORTH POINT,HONG KONG Tel: 0086-755-83453835 FAX: 0086-755-83453835 Email: [email protected] FCC Authorization Date: 2026-05-08 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , MAXWEST COMMUNICATION LIMITED, Hereby authorizes Bay Area Compliance Laboratories Corp.(Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature: Printed name: Rita Yu Title: Manager

QA-FR-1 72-A MAXWEST COMMUNICATION LIMITED ADD: FLAT/RM 707 7/F, FORTRESS TOWER 250 KING'S ROAD,NORTH POINT, HONG KONG TEL: 0086-755-83453835 FAX: 0086-755-83453835 E-mail: [email protected] FCC Confidential Authorization Date: 2026-05-08 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 hereby requests long-term confidential treatment of information Subject: Confidentiality Request regarding application for certification of FCC ID: 2 ASP8NITRON65 I n accordance with Sections 0.457 and 0.459 of the Commission’s Rules, MAXWEST COMMUNICATION LIMITED hereby requests long-term confidential treatment of information accompanying this application as outlined below: •Block Diagram •Schematics •Operation Description •Internal Photos •User’s Manual •External Photos • Parts List/Tune up procedure As well asshort-term (secrecy cycle:180 days) confidential treatment of information accompanying this •Test Set-up Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed Name: Rita Yu Title: Manager application as outlined below:

MAXWEST COMMUNICATION LIMITED ADD: FLAT/RM 707 7/F, FORTRESS TOWER 250 KING'S ROAD,NORTH POINT, HONG KONG TEL: 0086-755-83453835 FAX: 0086-755-83453835 E-mail: [email protected] DECLARATION OF SIMILARITY Date: 2026-05-08 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: We, MAXWEST COMMUNICATION LIMITED, hereby declare that the product: Phone, FCC ID: 2ASP8NITRON65. the model: NITRO N65 which was tested by Bay Area Compliance Laboratories Corp. (Dongguan) and has two configurations. Both configurations are electrically identical. The difference between these two configurations lies in whether they have a single SIM card slot or dual SIM card slots. Moreover, the colors of the two configurations are different, while the rest are the same. Please contact me should there be need for any additional clarification or information. Best Regards, Signature: Printed Name: Rita Yu Title: Manager

Unit:mm

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2602S35570E-RF-00B Report Template Version: FCC-BT-V2.2 Page 71 of 71 EXHIBIT C - RF EXPOSURE EVALUATION Applicable Standard According to§15.247(i) and §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB447498 D01 General RF Exposure Guidance v06: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. Measurement Result The max conducted power including tune-up tolerance is 5.5 dBm (3.55 mW). [(max. power of channel, mW)/(min. test separation distance, mm)][√f(GHz)] =3.55/5*(√2.480) = 1.1< 3.0 Note: the max conducted power including tune-up tolerance was declared by manufacturer. Result: Compliant. The stand-alone SAR evaluation is not necessary. ***** END OF REPORT *****

Antenna Test Report Shenzhen Deshiqin Technology Co.,Ltd Add:Building 2, Private Enterprise Technology Park, Xili University City, Nanshan District, Shenzhen,China 1：Power and sensitivity testing 1.1Test data Model： S6599Antenna : FPCUnit：dBm Channel GSM850GSM900DCS1800PCS1900 CH128CH192CH251CH1CH62CH124CH512CH698CH885CH512CH661CH810 TRP25.1225.2225.3326.4527.2327.2625.3625.8525.1225.5225.1224.85 TIS -102.42-102.18-103.43-103.45 WCDMA-1900WCDMA-850 CH9663CH9800CH9938CH4357CH4408CH4458 TRP 18.1218.3318.2116.1316.1616.12 TIS -104.14-103.17 Channel LTE-FDD-B2LTE-FDD-B4LTE-FDD-B5 LTE-FDD-B7 CH18650CH18900CH19150CH2000CH20175CH20350CH20450CH20525CH20600CH20800CH21100CH21400 TRP18.3618.2518.7518.2618.3618.5217.3617.1217.2518.2617.5717.42 TIS-92.43-92.56-91.36-91.25 LTE-FDD-B28ALTE-FDD-B28BLTE-TDD-B38 CH27260CH27370CH27469CH27410CH27510CH27600CH37850CH38000CH38150 TRP16.1217.2417.1117.1417.2416.4217.4817.3617.25 TIS-91.12-89.74-91.12 Channel Channel 2.GPS/WIFI/BT GPS Maximum signal strength Number of received stars Average positioning time（s） Weather conditions 421290-120Sunny WIFI Normal internet distance（m） Smooth distance for online browsing （m） 12-1510-12 BT Clear call distance（m） 10-12 frequency range 2400-2500MHz WIFI/BT 3. Antenna gain BandGAIN(dBi)BandGAIN(dBi) GSM850-1.6 LTE- B28A/B-2.5 EGSM900-1.45 LTE-B380.4 DCS18001 GPS 1.3 PCS19001.2 WIFI -0.96 W-Band21.2 BT -0.96 W-Band5-1.6 LTE-B2 1.2 LTE-B4 0.15 LTE-B5 -1.6 LTE-B7 -2.04 700M 800M 900M 1700M 1800M 2000M 、 2500M 2600M GPS WIFI/BT 2450M 4.Structural drawings (unit:mm) MX-N65-MAIN-V1.0 MX-N65-GWB-V1.0 MX-N65-DIV-V1.0

Report Template Version: FCC-BT-V2.2 Page 1 of 71 TEST REPORT Applicant: MAXWEST COMMUNICATION LIMITED Address: FLAT/RM 707 7/F, FORTRESS TOWER 250 KING'S ROAD,NORTH POINT, HONG KONG P r o d u c t N a m e : Phone F C C I D : 2ASP8NITRON65 Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2020 KDB 558074 D01 15.247 Meas Guidance v05r02 Report Number: 2602S35570E-RF-00B Report Date: 2026/5/13 The above device has been tested and found compliant with the requirement of the relevant standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Alice Tan Approved By: Pedro Yun Title: RF Engineer Title: RF Supervisor Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Each test item follows the test standard(s) without deviation. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2602S35570E-RF-00B Report Template Version: FCC-BT-V2.2 Page 2 of 71 CONTENTS DOCUMENT REVISION HISTORY ................................................................................................. 4 1. GENERAL INFORMATION ........................................................................................................... 5 1.1 GENERAL DESCRIPTION OF EQUIPMENT UNDER TEST ............................................................................. 5 1.2 ACCESSORY INFORMATION ........................................................................................................................ 5 1.3 ANTENNA INFORMATION DETAIL▲ .......................................................................................................... 5 1.4 EQUIPMENT MODIFICATIONS ..................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ................................................................................................... 6 3. DESCRIPTION OF TEST CONFIGURATION ............................................................................ 7 3.1 OPERATION FREQUENCY DETAIL .............................................................................................................. 7 3.2 EUT OPERATION CONDITION .................................................................................................................... 7 3.3 SUPPORT EQUIPMENT LIST AND DETAILS ................................................................................................. 7 3.4 SUPPORT CABLE LIST AND DETAILS .......................................................................................................... 7 3.5 BLOCK DIAGRAM OF TEST SETUP .............................................................................................................. 8 3.6 TEST FACILITY .......................................................................................................................................... 10 3.7 MEASUREMENT UNCERTAINTY ................................................................................................................ 10 4. REQUIREMENTS AND TEST PROCEDURES ......................................................................... 11 4.1 AC LINE CONDUCTED EMISSIONS ........................................................................................................... 11 4.1.1 Applicable Standard ............................................................................................................................................ 11 4.1.2 EUT Setup ........................................................................................................................................................... 12 4.1.3 EMI Test Receiver Setup .................................................................................................................................... 12 4.1.4 Test Procedure ..................................................................................................................................................... 13 4.1.5 Corrected Amplitude & Margin Calculation ....................................................................................................... 13 4.1.6 Test Result ........................................................................................................................................................... 13 4.2 RADIATED SPURIOUS EMISSIONS ............................................................................................................. 14 4.2.1 Applicable Standard ............................................................................................................................................ 14 4.2.2 EUT Setup ........................................................................................................................................................... 14 4.2.3 EMI Test Receiver & Spectrum Analyzer Setup ................................................................................................. 16 4.2.4 Test Procedure .....................................................................................................................................................…

Text truncated - open the document above for the full version.