2ASRB-M150Label Maker

zhuhai Quin Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 26, 2024 FCC ID: 2ASRB-M150 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing zhuhai Quin Technology Co., Ltd. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing zhuhai Quin Technology Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: zhuhai Quin Technology Co., Ltd. Address: ROOM 103-029(CENTRALIZED OFFICE AREA), 1F, BUILDING 1, NO. 18 FUTIAN ROAD, XIANGZHOU DISTRICT, ZHUHAI CITY China Person: Chloe Xu Tel.: +0756-8699759 Email: [email protected] Sincerely, Signature:

Zhuhai Quin Technology Co., Ltd. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: March 30, 2024 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2ASRB-M150 Zhuhai Quin Technology Co., Ltd.(“the applicant”) certifies that, as of the date of the filing of the application, USA MEIHUA TRADING INC (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. USA MEIHUA TRADING INC ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: USA MEIHUA TRADING INC FRN: 0033406166 Address: 5379 Pine Valley Ct Boulder, CO 80301 United States Signature: Contact Person: Harley Quinn Tel: (312) 363-9424 Email: [email protected] Applicant Company Name: Zhuhai Quin Technology Co., Ltd. FRN: 0028328375 Address: ROOM 103-029(CENTRALIZED OFFICE AREA), 1F, BUILDING 1, NO. 18 FUTIAN ROAD, XIANGZHOU DISTRICT, ZHUHAI CITY, China Signature: Contact Person: Chloe Xu Tel: 0756-8699759 Email: [email protected]

Report No: SSP24030088A Antenna Test Report Page 1 of 4 Antenna Test Report Test Standard: IEEE 149-1979 Manufacturer: Zhuhai Quin Technology Co., Ltd. Product Name: Label Maker Model: M150 Report No.: SSP24030088A Tested Date: 2024-03-09 Issued Date: 2024-03-11 Tested By: William Liu (Engineer) Approved By: Lahm Peng (Manager) Prepared By: Shenzhen ZRLK Testing Technology Co., Ltd. 1F, No. 35 Building, Changxing Technology Industrial Park, Yutang Street, Guangming New District, Shenzhen City, Guangdong Province, China Tel.: +86-755-33019599 Fax.: +86-755-33019599 Website: www.zrlklab.com Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen ZRLK Testing Technology Co., Ltd. Report No: SSP24030088A Antenna Test Report Page 2 of 4 1. General Information 1.1 Product Information Manufacturer Manufacturer: Zhuhai Quin Technology Co., Ltd. Address of Manufacturer: ROOM 103-029(CENTRALIZED OFFICE AREA), 1F, BUILDING 1, NO. 18 FUTIAN ROAD, XIANGZHOU DISTRICT, ZHUHAI CITY China General Description of Antenna Product Name: Label Maker Model No.: M150 Frequency Range: 2400MHz-2483.5MHz Type of Antenna: PCB Antenna Antenna Gain: -0.58dBi (Max.) Impedance: 50 ohm Antenna View (15mm*6mm) 1.2 Test Methodology All measurements contained in this report were conducted with standards IEEE 149-1979 for IEEE Standard Test Procedures for Antennas. 1.3 Test Facilities Testing Lab: Shenzhen ZRLK Testing Technology Co., Ltd. All measurement facilities used to collect the measurement data are located at 1F, No. 35 Building, Changxing Technology Industrial Park, Yutang Street, Guangming New District, Shenzhen City, Guangdong Province, China Report No: SSP24030088A Antenna Test Report Page 3 of 4 2. OTA Test 2.1 Gain Frequency Peak Gain (dBi) Polarity 2402MHz -0.58 Horizontal 2402MHz -0.65 Vertical 2442MHz -1.35 Horizontal 2442MHz -1.78 Vertical 2480MHz -1.9 Horizontal 2480MHz -2.21 Vertical 2.2 Radiation Pattern View Report No: SSP24030088A Antenna Test Report Page 4 of 4

zhuhai Quin Technology Co., Ltd. Date: March 26, 2024 Product Model Number: M150, M110, M120, MC020, M160, M100, M110 PRO, M120 PRO, M170, M150 PRO, M170 PRO, M180, M160 PRO, M180 PRO, M190, M100 PRO, M190 PRO FCC ID: 2ASRB-M150 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Chloe Xu Contact Listed on FCC Wesbite Title: product manager Email: [email protected] Telephone: +0756-8699759 On behalf of: zhuhai Quin Technology Co., Ltd.

zhuhai Quin Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 1, 2024 Subject; Request for Confidentiality FCC ID: 2ASRB-M150 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Chloe Xu Title: product manager

Zhuhai Quin Technology Co., Ltd. Model Difference Statement Dear Sir/Madam, Added models M110, M120, MC020, M160, M100, M110 PRO, M120 PRO, M170, M150 PRO, M170 PRO, M180, M 160 PRO, M180 PRO, M190, M100 PRO, M190 PRO basis of the original product M150. The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: Chloe Xu Title: product manager Company name: Zhuhai Quin Technology Co., Ltd. Address: ROOM 103-029(CENTRALIZED OFFICE AREA), 1F, BUILDING 1, NO. 18 FUTIAN ROAD, XIANGZHOU DISTRICT, ZHUHAI CITY China

Report No: SSP24030088-2E FCC ID: 2ASRB-M150 Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

CCUT Testing & Certification Report No: SSP24030088-1E FCC Test Report Page 1 of 46 FCC TEST REPORT FCC ID: 2ASRB-M150 Report No. : SSP24030088 -1E Applicant : Zhuhai Quin Technology Co., Ltd. Product Name : Label Maker Model Name : M150 Test Standard : FCC Part 15.247 Date of Issue : 2024-03-20 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. CCUT Testing & Certification Report No: SSP24030088-1E FCC Test Report Page 2 of 46 Test Report Basic Information Applicant..................................: Zhuhai Quin Technology Co., Ltd. Address of Applicant...............: ROOM 103-029(CENTRALIZED OFFICE AREA), 1F, BUILDING 1, NO. 18 FUTIAN ROAD, XIANGZHOU DISTRICT, ZHUHAI CITY China Manufacturer..........................: Zhuhai Quin Technology Co., Ltd. Address of Manufacturer........: ROOM 103-029(CENTRALIZED OFFICE AREA), 1F, BUILDING 1, NO. 18 FUTIAN ROAD, XIANGZHOU DISTRICT, ZHUHAI CITY, CHINA Product Name.........................: Label Maker Brand Name.............................: - Main Model..............................: M150 Series Models..........................: M110, M120, MC020, M160, M100, M110 PRO, M120 PRO, M170, M150 PRO, M170 PRO, M180, M160 PRO, M180 PRO, M190, M100 PRO, M190 PRO Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2013 Date of Test .............................: 2024-03-15 to 2024-03-20 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lieber Ouyang) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. CCUT Testing & Certification Report No: SSP24030088-1E FCC Test Report Page 3 of 46 CONTENTS 1. General Information ....................................................................................................................................................... 5 1.1 Product Information ................................................................................................................................................ 5 1.2 Test Setup Information............................................................................................................................................. 6 1.3 Compliance Standards .............................................................................................................................................. 7 1.4 Test Facilities ........................................................................................................................................................... 7 1.5 List of Measurement Instruments ............................................................................................................................. 8 1.6 Measurement Uncertainty ........................................................................................................................................ 8 2. Summary of Test Results ................................................................................................................................................ 9 3. Antenna Requirement .................................................................................................................................................. 10 3.1 Standard and Limit................................................................................................................................................. 10 3.2 Test Result ............................................................................................................................................................. 10 4. Conducted Emissions ................................................................................................................................................... 11 4.1 Standard and Limit................................................................................................................................................. 11 4.2 Test Procedure....................................................................................................................................................... 11 4.3 Test Data and Results ............................................................................................................................................. 12 5. Radiated Emissions ...................................................................................................................................................... 15 5.1 Standard and Limit................................................................................................................................................. 15 5.2 Test Procedure....................................................................................................................................................... 15 5.3 Test Data and Results ............................................................................................................................................. 17 6. Band-edge Emissions(Radiated) .................................................................................................................................. 21 6.1 Standard and Limit................................................................................................................................................. 21 6.2 Test Procedure.......................................................................…

Text truncated - open the document above for the full version.

CCUT Testing & Certification Report No: SSP24030088-2E FCC Test Report Page 1 of 32 FCC TEST REPORT FCC ID: 2ASRB-M150 Report No. : SSP24030088-2E Applicant : Zhuhai Quin Technology Co., Ltd. Product Name : Label Maker Model Name : M150 Test Standard : FCC Part 15.247 Date of Issue : 2024-03-20 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. CCUT Testing & Certification Report No: SSP24030088-2E FCC Test Report Page 2 of 32 Test Report Basic Information Applicant..................................: Zhuhai Quin Technology Co., Ltd. Address of Applicant...............: ROOM 103-029(CENTRALIZED OFFICE AREA), 1F, BUILDING 1, NO. 18 FUTIAN ROAD, XIANGZHOU DISTRICT, ZHUHAI CITY China Manufacturer..........................: Zhuhai Quin Technology Co., Ltd. Address of Manufacturer........: ROOM 103-029(CENTRALIZED OFFICE AREA), 1F, BUILDING 1, NO. 18 FUTIAN ROAD, XIANGZHOU DISTRICT, ZHUHAI CITY, CHINA Product Name.........................: Label Maker Brand Name.............................: Main Model..............................: M150 Series Models..........................: M110, M120, MC020, M160, M100, M110 PRO, M120 PRO, M170, M150 PRO, M170 PRO, M180, M160 PRO, M180 PRO, M190, M100 PRO, M190 PRO Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2013 Date of Test .............................: 2024-03-15 to 2024-03-20 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lieber Ouyang) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. CCUT Testing & Certification Report No: SSP24030088-2E FCC Test Report Page 3 of 32 CONTENTS 1. General Information ....................................................................................................................................................... 5 1.1 Product Information ................................................................................................................................................ 5 1.2 Test Setup Information............................................................................................................................................. 6 1.3 Compliance Standards .............................................................................................................................................. 7 1.4 Test Facilities ........................................................................................................................................................... 7 1.5 List of Measurement Instruments ............................................................................................................................. 8 1.6 Measurement Uncertainty ........................................................................................................................................ 8 2. Summary of Test Results ................................................................................................................................................ 9 3. Antenna Requirement .................................................................................................................................................. 10 3.1 Standard and Limit................................................................................................................................................. 10 3.2 Test Result ............................................................................................................................................................. 10 4. Conducted Emissions ................................................................................................................................................... 11 4.1 Standard and Limit................................................................................................................................................. 11 4.2 Test Procedure....................................................................................................................................................... 11 4.3 Test Data and Results ............................................................................................................................................. 12 5. Radiated Emissions ...................................................................................................................................................... 15 5.1 Standard and Limit................................................................................................................................................. 15 5.2 Test Procedure....................................................................................................................................................... 15 5.3 Test Data and Results ............................................................................................................................................. 17 6. Band-edge Emissions(Radiated) .................................................................................................................................. 21 6.1 Standard and Limit................................................................................................................................................. 21 6.2 Test Procedure..........................................................................…

Text truncated - open the document above for the full version.