2ASV9-6189NWiFi Module V2.0

6189N-SFC WiFi Module V2.0 Module manual 6189N-SFC WiFi Module V2.0 Customer Approval :Company Title Signature Date Fn-Link 6189N-SFC F Revision History Version DateRevision ContentDraftApproved 1.02019/01/10 New versionLzmLxy 1.12019/04/10 Update thickness dimensionLxySzs 1.22019/08/06 Update packing informationLxySzs 1.32019/11/12 Update module photoLxySzs 6189N-SFC F CONTENTS 1 Overview .................................................................................................................................... 1 1.1 Introduction ......................................................................................................................... 1 1.2 Features .............................................................................................................................. 1 1.3 General Specification ........................................................................................................ 2 1.4 Recommended Operating Rating .................................................................................... 2 ※ 1.5 EEPROM Information....................................................................................................2 2 General Specification ............................................................................................................. 2 2.1 Wi-Fi RF Specifications ..................................................................................................... 2 3 Pin Assignments ..................................................................................................................... 3 3.1 Pin Outline ........................................................................................................................... 3 3.2 Pin Definition ....................................................................................................................... 4 4 Dimensions ............................................................................................................................... 5 4.1 Module Picture ................................................................................................................... 5 4.2 Marking Description ........................................................................................................... 5 4.3 Module Physical Dimensions ........................................................................................... 6 4.4 Layout Reference ............................................................................................................... 7 6 Host Interface Timing Diagram ............................................................................................ 8 6.1 SDIO Pin Description ........................................................................................................ 8 6.2 SDIO Default Mode Timing Diagram .............................................................................. 9 6.3 SDIO Power-on sequence ................................................................................................ 9 7 Reference Design ................................................................................................................. 10 8 Ordering Information ........................................................................................................... 11 9 The Key Material List ........................................................................................................... 11 10 Environmental Requirements .......................................................................................... 11 10.1 Recommended Reflow Profile ..................................................................................... 11 10.2 Patch Wi-Fi modules installed before the notice ...................................................... 12 11 Package ................................................................................................................................. 13 11.1 Reel .................................................................................................................................. 13 11.2 Packaging Detail ............................................................................................................ 13 6189N 1 1 Overview 1.1 Introduction 6189N-SFC is a highly integrated and excellent performance Wireless LAN (WLAN) SDIO network interface device. High-speed wireless connection up to 150 Mbps. It can be easily manufactured on SMT process. This WLAN Module design is based on Realtek RTL8189FTV-VC-CG. It is a highly integrated single-chip Wireless LAN (WLAN) SDIO network interface controller complying with the 802.11n specification. It combines a MAC, a 1T1R capable baseband, and RF in a single chip. It is designed to provide excellent performance with low power Consumption and enhance the advantages of robust system and cost-effective. This compact module is a total solution for Wi-Fi technology. The module is specifically developed for Smart phones and Portable devices. 1.2 Features Operate at ISM frequency bands (2.4GHz) CMOS MAC, Baseband PHY, and RF in a single chip for 802.11b/g/n compatible WLAN Wi-Fi 1 transmitter and 1 receiver allow data rates supporting up to 150 Mbps downstream and 150 Mbps upstream PHY rates 6189N-SFC FN-LINK TECHNOLOGY LIMITEDProprietary & Confidential Information 2 1.3 General Specification Model Name6189N-SFC Product Description SWiFi Module V2.0 Dimension L x W x T: 23 x 21 x 4.8 (typical) mm Wi-Fi Interface Support SDIO Operating temperature 0°C to 70°C Storage temperature -55°C to +125°C 1.4 Recommended Operating Rating Min.Typ. Max. Unit Operating Temperature02570 deg.C VBAT3.03.33.6V VDDIO1.7 1.8 or 3.3 3.6V ※ 1.5 EEPROM Information WI-FI Vendor ID024C Product IDF179 2 General Specification 2.1 Wi-Fi RF Specifications FeaturesDescriptions Main ChipsetRealtek RTL8189FTV-VC-CG Operating Frequency 2.400～2.4835GHz Operating Voltage 3.3Vdc±10% I/O supply voltage Host InterfaceSDIO/GSPI WIFI Standar…

Text truncated - open the document above for the full version.

SharkNinja Operating LLC. Date: 14 Jan 2020 We The SharkNinja Operating LLC, hereby declare that this EUT（FCC ID:2ASV9‐6189N) doesn’t have Ad Hoc Mode function on “non‐US/Canada frequencies” In addition ,the frequency selection feature is disabled by firmware for devices marketed to US/Canada. For DTS part of this device ,only channels 1‐11 will be used in North America .Country code selection is disabed. Should you have any questions or comments regarding this matter ,please have my best attention. Sincerely yours, Print name:Paul SIlva Title: Manager SharkNinja Operating LLC

SharkNinja Operating LLC Date: 14 Jan, 2020 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 RE: SharkNinja Operating LLC FCC ID: 2ASV9‐6189N FCC Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. SharkNinja Operating LLC requests that the following documents regarding this submission for FCC ID : 2ASV9‐6189N be kept Long‐Term confidential: Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operational Description Operational Description.pdf And below exhibit kept short‐term confidential (180 days): Exhibit Type File Name External Photos External Photo.pdf Internal Photos Internal Photo.pdf Test Setup Photos Test Setup Photos.pdf Users Manuals Users Manual.pdf Those documents contain detailed system and equipment description and related information about the product which SharkNinja Operating LLC considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, SharkNinja Operating LLC considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Thank you for your attention to this matter. Yours Sincerely, Print name: Paul Silva Title: Mangaer SharkNinja Operating LLC

Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: _2ASV9-6189N__________________ Items to be covered by Single modular transmitters. Answer from applicant 1. The modular transmitter must have its own RF shielding. Yes, shield is provided as verfieid in the submitted photo 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Yes,the devices contains buffered modulation inputs in U1,RTL8189FTV 3. The modular transmitter must have its own power supply regulation. Yes,Yes,the devices contains power supply regulation in U1,RTL8189FTV 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). Yes, the module has a non- detachable PCB antenna. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes, the module was tested in a stand-alone configuration please refer to test setup photo. 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). Yes, the module has a permanently affixed label with its own FCC ID number .Please refer to label and label location. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Yes,the module comply with this requirement .Please refer to user manual . 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Yes,the module comply with this requirement .Please refer to MPE report. Items to be covered by Split modular transmitters. Answer from applicant 1. The modular transmitter must comply with all requirements of a single modular transmitter except for items (1) & (5) of the above single modular approval requirements. 2. Only the radio front end must be shielded. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The interface between the split sections of the modular system must be digital with a minimum signalling amplitude of 150 mV peak-to-peak. 3. Control information and other data may be exchanged between the transmitter control elements and radio front end. 4. The sections of a split modular transmitter must be tested installed in a host device(s) similar to that which is representative of the platform(s) intended for use. 5. Manufacturers must ensure that only transmitter control elements and radio front end components that have been approved together are capable of operating together. The transmitter module must not operate unless it has verified that the installed transmitter control elements and radio front end have been authorized together. Manufacturers may use means including, but not limited to, coding in hardware and electronic signatures in software to meet these requirements, and must describe the methods in their application for equipment authorization. Note: A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with the requirements above. Name and surname of applicant (or authorized representative): ___Paul Silva___________ Date: ___14 Jan,2020____________ Signature: _____________________

AnnexNo.:BL-SZ19C0307-AW 1 / 3 EUTEXTERNALPHOTOS FRONTVIEWOFEUT REARVIEWOFEUT AnnexNo.:BL-SZ19C0307-AW 2 / 3 LEFTVIEWOFEUT RIGHTVIEWOFEUT AnnexNo.:BL-SZ19C0307-AW 3 / 3 TOPVIEWOFEUT BOTTOMVIEWOFEUT

Label： Label location: MODEL:6189N-SFC Name:WiFi Module V2.0 FCC ID:2ASV9-6189N CMIIT ID:2019DP5985 IC :24909-6189N XXXXXXXX

AnnexNo.:BL-SZ19C0307-AI 1 / 1 EUTINTERNALPHOTOS MAINBOARDTOPVIEW(WITHOUTSHIELDING) Antenna RFChip

RF Exposure Evaluation For FCC ID: 2ASV9-6189N Refer user manual this device is a WiFi Module V2.0, and this device was designed used in Mobile devices that the minimum distance between human’s body is 20cm. Based on the 47CFR 2.1091, this device belongs to Mobile device. The definition of the category as following: Mobile Derives: CFR Title 47 §2.1091(b) (b) For purposes of this section, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. FCC KDB 447498 D01 General RF Exposure Guidance v06 Limit Devices operating in standalone mobile exposure conditions may contain a single transmitter or multiple transmitters that do not transmit simultaneously. A minimum test separation distance ≥ 20 cm is required between the antenna and radiating structures of the device and nearby persons to apply mobile device exposure limits. The distance must be fully supported by the operating and installation configurations of the transmitter and its antenna(s), according to the source-based time-averaged maximum power requirements of § 2.1091(d)(2). In cases where cable losses or other attenuations are applied to determine compliance, the most conservative operating configurations and exposure conditions must be evaluated. The minimum test separation distance required for a device to comply with mobile exposure conditions must be clearly identified in the installation and operating instructions, for all installation and exposure conditions, to enable users and installers to comply with RF exposure requirements. For mobile devices that have the potential to operate in portable device exposure conditions, similar to the configurations described in § 2.1091(d)(4), a KDB inquiry is required to determine the SAR test requirements for demonstrating compliance. When the categorical exclusion provision of § 2.1091(c) applies, the minimum test separation distance may be estimated, when applicable, by simple calculations according to plane-wave equivalent conditions, to ensure the transmitter and its antenna(s) can operate in manners that meet or exceed the estimated distance. The source-based time-averaged maximum radiated power, according to the maximum antenna gain, must be applied to calculate the field strength and power density required to establish the minimum test separation distance. When the estimated test separation distance becomes overly conservative and does not support compliance, MPE measurement or computational modeling may be used to determine the required minimum separation distance. According to FCC Part 1.1307, systems operating under the provisions of this section shall be operated in a manner the ensures that the public is not exposed to radio frequency energy level in excess of the commission’s guidelines. Limits for General Population/ Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength(E)(V/m) Magnetic Field Strength (H)(A/m) Power Density (S)(mW/cm 2 ) 0.3-1.34 614 1.63 (100)* 1.34-30 824/f 2.19/f (180/f2)* 30-300 27.5 0.073 0.2 300-1500 f/1500 1500-100,000 1.0 MPE calculation formula Where: S = power density P = output power (mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = Separation distance between radiator and human body (cm) Test data 2.4G WIFI Mode 802.11b 802.11g 802.11n-20 802.11n-40 Average Power (dBm) 15.45 14.27 14.30 14.22 Note: This report listed the worst case average power value, please refer to RF test report for more details. Turn-up power Band Mode Range (dBm) 2.4G WIFI 802.11b 14.00-16.00 802.11g 12.50-14.50 802.11n-20 12.50-14.50 802.11n-40 12.50-14.50 Test result Evolution mode Maximum peak output power （dBm） Antenna Gain (typical) (dBi) To t a l Power (mw) Distance (cm) Limit of Power Density (mW/cm²) Power Density (mW/cm²) Verdict 2.4G WIFI 16.00 3.5 89.1320 1 0.018 Pass Note: 1. The WiFi Module V2.0 work frequency range used is 2400 MHz ~ 2483.5 MHz, the result close to the limit by the above formula. 2. More power list please refer to RF test report. Conclusion: RF exposure Evaluation Results: Compliance

Report No.: BL-SZ19C0307-601 2 / 88 Revision History VersionIssue DateRevisions Content Rev. 01Jan. 15, 2020Initial Issue TABLE OF CONTENTS 1 ADMINISTRATIVE DATA (GENERAL INFORMATION).......................................................................................... 1.1 Identification of the Testing Laboratory................................................................................................................ 1.2 Identification of the Responsible Testing Location ............................................................................................. 1.3 Laboratory Condition ............................................................................................................................................... 1.4 Announce.................................................................................................................................................................. 2 PRODUCT INFORMATION .......................................................................................................................................... 2.1 Applicant Information.............................................................................................................................................. 2.2 Manufacturer Information....................................................................................................................................... 2.3 Factory Information ................................................................................................................................................. 2.4 General Description for Equipment under Test (EUT) ....................................................................................... 2.5 Technical Information .............................................................................................................................................. 2.6 Additional Instructions............................................................................................................................................. 3 SUMMARY OF TEST RESULTS................................................................................................................................. 3.1 Test Standards......................................................................................................................................................... 3.2 Verdict ........................................................................................................................................................................ 4 GENERAL TEST CONFIGURATIONS ........................................................................................................................ 4.1 Test Environments ................................................................................................................................................... 4.2 Test Equipment List................................................................................................................................................. 4.3 Measurement Uncertainty...................................................................................................................................... 4.4 Description of Test Setup ....................................................................................................................................... 4.4.1 For Antenna Port Test..................................................................................................................................... 4.4.2 For AC Power Supply Port Test ..................................................................................................................... 4.4.3 For Radiated Test (Below 30 MHz) ............................................................................................................... 4.4.4 For Radiated Test (30 MHz-1 GHz).............................................................................................................. 4.4.5 For Radiated Test (Above 1 GHz)................................................................................................................. 4.5 Measurement Results Explanation Example...................................................................................................... Report No.: BL-SZ19C0307-601 3 / 88 4.5.1 For conducted test items:................................................................................................................................ 4.5.2 For radiated band edges and spurious emission test:............................................................................... 5 TEST ITEMS .................................................................................................................................................................... 5.1 Antenna Requirements ........................................................................................................................................... 5.1.1 Relevant Standards......................................................................................................................................... 5.1.2 Antenna Anti-Replacement Construction..................................................................................................... 5.1.3 Antenna Gain.................................................................................................................................................... 5.2 Output Power........................................................................................................................................................... 5.2.1 Test Limit ........................................................................................................................................................... 5.2.2 Test Setup ......................................................................................................................................................... 5.2.3 Test Procedure........…

Text truncated - open the document above for the full version.

AnnexNo.:BL-SZ19C0307-AR 1 / 4 TESTSETUPPHOTOS 1. RadiatedTestPhoto Below30MHz 30MHz-1GHz AnnexNo.:BL-SZ19C0307-AR 2 / 4 Close-up Above1GHz AnnexNo.:BL-SZ19C0307-AR 3 / 4 Close-up 2.ConductedTestPhoto ConductedTest-WIFI AnnexNo.:BL-SZ19C0307-AR 4 / 4 3.ConductedEmissions TestPhoto1 TestPhoto2