2ASVG-PEGASUS1PEGASUS

Pegasus Installation Instructions 400243 | v. 1.0 | 29 August 2023 DATA Pegasus 30230 4 V+ V- + G - COMPATLOCAL CHANNEL FCC ID: 2ASYG-PEGASUS1 R.RX R.TX PROG RF LEARN Please use this QR Code to access more documents and Video Tutorials related to the product. FCC INFORMATION This device complies with FCC RF radiation exposure limits set forth for general population. This device must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the the interference by one or more of the following measures:- - - - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Canada's license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Scan the QR code to scan Pegasus specsheet Tech Specs Technical Support: 512.832.6939 Hours of Support: 7:30am - 5pm CST [email protected] [email protected] CONTENTS Parts in the Box 4 Mounting Options 5 RJ45 and Power Pinouts 6 GPI/O and Dry Contact Pinouts 7 IR HEX codes 8 LED Details 9 User Button Actions 10 Learning Somfy/Olibra Remotes, Keypads & Sensors 11 Learning Pico Remotes to Control a 485 Motor 12 Programming an RTS Motor Channel 13 RTS Smart Repeater Setup 14 RTS to 485 Smart Receiver Setup 15 485 to RTS Smart Transmitter Setup 16 Network Mode 17 Factory Reset 18 4 PARTS IN THE BOX (1) White Decora Wall Trim Plate (1) Pegasus(1) Pegasus Decora Label (1) AUX USB Power Cable (1) CAT5e(2) J Box screws (2)Trim plate screws 5 Left or Right Din Rail mounting Standard single or multiple gang J Box MOUNTING OPTIONS Choose your mounting: Pegasus Pro-tip It is best not to mount Pegasus in a metal J Box 6 RJ45 AND POWER PINOUTS 5 position removable screw-down Terminal block connector for GPI/O Aux power Input (7-28vDC) Data +(WHT/ ORG) Data - (ORG) N/A (WHT/ GRN) N/A (GRN) Power + (BLUE) Ground - (WHT/ BRWN) Ground - (BRWN) Power + (WHT/ BLUE) 485 Connection (TIA 568B)RJ Pin Outs 1 8 DATA Pegasus 30230 4 V+ V- + G - COMPATLOCAL CHANNEL FCC ID: 2ASYG-PEGASUS1 R.RX R.TX PROG RF LEARN - Ground (USB Black) +7-28vDC Positive (USB Red) 7 GPI/O AND DRY CONTACT PINOUTS UP STOP 12 V Trigger Sleeve Tip DC 0 - 10V Input GND (PINK) (-) POSITIVE (VIOLET) (+) IR Input BLACK (IR/SERIAL-)(GND) YELLOW (IR/SERIAL+)(485 DATA -(SIG OUT)) GREEN(DATA +(VSI) Dry Contacts DOWN 8 IR HEX CODES 0000 006c 0000 000c 0006 011b 0006 011b 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 011b 0006 08a4 0000 006c 0000 000c 0006 011b 0006 011b 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 011b 0006 011b 0006 08a4 0000 006c 0000 000c 0006 011b 0006 011b 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 011b 0006 00bb 0006 08a4 UP STOP DOWN Third party IR universal control systems may be used to control the screen or using these hex codes: (Available on the website too.) * Not included / optional 9 LED DETAILS Compatible Mode ON when in Compatible Mode UP GPI/O Briefly turns on with a valid up signal on the GPI/O Connector Repeater Mode Transmit (Tx) On SOLID when IN Repeater RX Mode Repeater Mode Receive (Rx) On SOLID when IN Repeater RX Mode Sub GHz Signal Briefly turns on with any valid Sub GHz Data (Receiving or Trasmitting) Both Rx and Tx LED's remain on when in Rx/Tx repeater mode Learn Flashes when learning a remote 485 Data/Power ON, when power from BUS or AUX is applied and flashes OFF with 485 data on Bus DOWN GPI/O Briefly turns on with a valid signal on the GPIO/O Connector Local Mode ON when in Local Mode R.RX R.TX DATA Pegasus 30230 4 V+ V- + G - COMPATLOCAL CHANNEL FCC ID: 2ASYG-PEGASUS1 R.RX R.TX PROG RF LEARN 10 DATA Pegasus 30230 4 V+ V- + G - COMPATLOCAL CHANNEL FCC ID: 2ASYG-PEGASUS1 R.RX R.TX PROG RF LEARN USER BUTTON ACTIONS 16 Rx/16 Tx Channels O-F Note: moving the Hex to C.E.F. will change the transceiver to one of three repeater functions in local mode HEX Switch Fixed Channels C = Repeater Transmit Mode (Tx) R.TX LED ON (Transmits relayed 485 repeater groups) D = Repeater Receive Mode (Rx) R.Rx LED ON (relays received RF cmds and sends over 485) E = Repeater Legacy Mode (Rx/Tx) Both R.Rx and R.Tx LED ON (repeats cmds from Rx. to Tx) F = Motor Channel / GPI/O Output Default Program Button Press and release sends pairing command. Use this button to program SubGHz Motors. Hold button (3 seconds to reboot and boot in compatibility mode (Compat LED turns on)(Legacy mode is default)toggle Holding both Program and Learn button down for approx. 3 secs will factory reset, all LED's will come on (erases all channels in and out and puts Pegasus back in Local mode and Legacy compatibility) Learn Button Press this button (LED starts flashing) to LEARN a Sub GHz keypad, remote or sensor on the currently set Hex CH (up to 16) Hold button (3 seconds) (until LED comes on to erase the current He…

Text truncated - open the document above for the full version.

Rev 1/26/2023 US SHADE CORPORATION Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-22-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2ASVG-PEGASUS1 US SHADE CORPORATION (“Michael Braithwaite”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Michael Braithwaite Rev 1/26/2023 US SHADE CORPORATION Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-22-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2ASVG-PEGASUS1 US SHADE CORPORATION (“Michael Braithwaite”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Michael Braithwaite

Rev 1/26/2023 US SHADE CORPORATION Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-22-2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: 2ASVG-PEGASUS1 US SHADE CORPORATION (“Michael Braithwaite”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0028356186 Name: US SHADE CORPORATION Address: 9715-B Burnet Rd. #400 Austin, TX 78758 United States Contact Person: Michael Braithwaite Tel.: (512) 832-6939 Email: [email protected] Sincerely, US SHADE CORPORATION Michael Braithwaite

US SHADE CORPORATION Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 09-22-2023 SUBJECT: FCC Application for (FCC ID: 2ASVG-PEGASUS1) To Whom It May Concern: I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements: 1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, US SHADE CORPORATION ------------------------------- Michael Braithwaite

\\192.168.0.6\rf无线2\3.2023年案件\9月\黄煜翔\03. 待递交\9.8 LCSA09073077E-C230907002-1-US-PEGASUS-谭丹红-FCCID-黄煜翔-报告章\07机构 递交\Letters\POA_Letter.docx US SHADE CORPORATION Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 09-22-2023 SUBJECT: FCC Application for (FCC ID: 2ASVG-PEGASUS1) To Whom It May Concern: We, the undersigned, hereby authorize Gavin Liang at Shenzhen LCS Compliance Testing Laboratory Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Gavin Liang at Shenzhen LCS Compliance Testing Laboratory Ltd.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, ------------------------------- Michael Braithwaite

Page1of4FCCID:2ASVG-PEGASUS1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity ExternalPhotosoftheEUT Fig.1 Fig.2 Page2of4FCCID:2ASVG-PEGASUS1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.3 Fig.4 Page3of4FCCID:2ASVG-PEGASUS1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.5 Fig.6 Page4of4FCCID:2ASVG-PEGASUS1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.7

Page1of1FCCID:2ASVG-PEGASUS1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity LABELANDLOCATION (Size:L3.0cmx3.0cm) LabelLocation PEGASUS Model:PEGASUS1 FCCID:2ASVG-PEGASUS1

Page1of3FCCID:2ASVG-PEGASUS1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity InternalPhotosoftheEUT Fig.1 Fig.2 Page2of3FCCID:2ASVG-PEGASUS1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.3 Fig.4 Antenna Page3of3FCCID:2ASVG-PEGASUS1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.5

Page1of3FCCID:2ASVG-PEGASUS1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCCRFExposureEvaluation 1.ProductInformation ProductnamePEGASUS TestModelPEGASUS1 PowerSupply Input:DC7-28V HardwareVersion / SoftwareVersion / FrequencyRange 433.45MHz ChannelNumber1 ModulationType ASK AntennaDescriptionCeramicAntenna,0.79dBi(max.) ExposurecategoryGeneralpopulation/uncontrolledenvironment EUTTypeProductionUnit DeviceTypeMobileDevices Page2of3FCCID:2ASVG-PEGASUS1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity 2.EvaluationmethodandLimit SystemsoperatingundertheprovisionsofFCC47CFRsectionshallbeoperatedinamannerthatensures thatthepublicisnotexposedtoradiofrequencyenergylevelinexcessoftheCommission’sguidelines. Inaccordancewith47CFRFCCPart2SubpartJ,section2.1091thisdevicehasbeendefinedasmobile devicewherebyadistanceof0.2mnormallycanbemaintainedbetweentheuserandthedevice,andbelow RFPermissibleExposurelimitshallcomplywith. InaccordancewithKDB447498D01forSimultaneoustransmissionMPEtestexclusionapplieswhenthesum oftheMPEratiosforallsimultaneoustransmittingantennasincorporatedinahostdevice,basedonthe calculated/estimated,numericallymodelledormeasuredfieldstrengthsorpowerdensity,is≤1.0.TheMPE ratioofeachantennaisdeterminedattheminimumtestseparationdistancerequiredbytheoperating configurationsandexposureconditionsofthehostdevice,accordingtotheratiooffieldstrengthsorpower densitytoMPElimit,atthetestfrequency.Eitherthemaximumpeakorspatiallyaveragedresultsfrom measurementsornumericalsimulationsmaybeusedtodeterminetheMPEratios.Spatialaveragingdoesnot applywhenMPEisestimatedusingsimplecalculationsbasedonfar-fieldplane-waveequivalentconditions. Theantennainstallationandoperatingrequirementsforthehostdevicemustmeettheminimumtest separationdistancesrequiredbyallantennas,inbothstandaloneandsimultaneoustransmissionoperations, tosatisfycompliance. 3.Limit 3.1ReferEvaluationMethod ANSIC95.1–2019:IEEEStandardforSafetyLevelswithRespecttoHumanExposuretoElectric,Magnetic, andElectromagneticFields,0Hzto300GHz FCCKDBpublication447498D01General1RFExposureGuidancev06:MobileandPortableDevicesRF ExposureProceduresandEquipmentAuthorizationPolicies. FCCCFR47part11.1310:Radiofrequencyradiationexposurelimits. FCCCFR47part22.1091:Radiofrequencyradiationexposureevaluation:mobiledevices. 3.2Limit LimitsforMaximumPermissibleExposure(MPE)/ControlledExposure Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm²) AveragingTime (minute) LimitsforOccupational/ControlledExposure 0.3–3.0 3.0–30 30–300 300–1500 1500–100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100)* (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 LimitsforMaximumPermissibleExposure(MPE)/UncontrolledExposure Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm²) AveragingTime (minute) LimitsforOccupational/UncontrolledExposure 0.3–3.0 3.0–30 30–300 300–1500 1500–100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100)* (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequencyinMHz *=Plane-waveequivalentpowerdensity Page3of3FCCID:2ASVG-PEGASUS1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity 4.MPECalculationMethod PredicationofMPElimitatagivendistance Equationfrompage18ofOETBulletin65,Edition97-01 S=PG/4πR² Where:S=powerdensity P=powerinputtoantenna G=powergainoftheantennainthedirectionofinterestrelativetoanisotropicradiator R=distancetothecenterofradiationoftheantenna 5.AntennaInformation EUTcanonlyuseantennascertificatedasfollowsprovidedbymanufacturer; Antennatypeandantenna number OperatefrequencybandMaximumantennagain Notes CeramicAntenna419-447MHz0.79dBi433Antenna 6.ConductedPower TestProcedure TXfrequencyrange:433.45MHz Devicecategory:Portabledevice(Distance:20cm)Max. FieldStrength:60.60dBuV/m@3m EIRP=E-104.8+20logD=60.60-104.8+20log3=-34.66dBm MaximumConductedOutputPower:-34.66dBm Turn-up:-34±1 7.EvaluationResults AsdeclaredbytheApplicant,theEUTisawirelessdeviceusedinafixapplication,atleast20cmfromany bodypartoftheuserornearbypersons;fromthemaximumEUTRFoutputpower,theminimumseparation distance,r=20cm,aswellasthegainoftheusedantennarefertoantennainformation,theRFpowerdensity canbeobtained. [SRD] ModulationType OutputpowerAntenna Gain (dBi) Antenna Gain (linear) MPE (mW/cm2) MPE Limits (mW/cm2) dBmmW ASK -33.00.000250.791.20.00000010.28928 Remark: 1.Outputpowerincludingtuneuptolerance; 2.Outputpowerwasadjusttodutycycleat100%ifmeasureddutycyclelessthan98%; 3.MPEevaluatedistanceis20cmfromusermanualprovidebymanufacturer. 8.Conclusion ThemeasurementresultscomplywiththeFCCLimitper47CFR2.1091fortheuncontrolledRFExposureof mobiledevice. .......................THEENDOFREPORT.........................

PART NUMBER: ANT1204F002R0433A In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. For more information: Pulse Worldwide HeadquartersPulse/Larsen AntennasEurope HeadquartersPulse (Suzhou) Wireless Products Co, Inc. Pulse GmbH & Do, KG99 HuoJuRoad(#29 Bldg,4 th 15255 Innovation Drive #100Phase San Diego, CA 92128Vancouver, WA 98683Zeppelinstrasse15Suzhou New District USAUSAHerrenberg, Germany Jiangsu Province, Suzhou 215009 PR China Tel:1-858-674-8100Tel: 1-360-944-7551 - Tel: 49 7032 7806 0 Tel: 86 512 6807 9998 18110 SE 34 th St Bldg2 Suite 250 Features: Applications: •Size : 12.3x4.0x1.6 mm •Omni-directional Radiation •Tape & reel automatic mounting •Reflow process compatible •RoHScompliant •Smart meter •Industrial remote control •ISM band equipment Manufacturer Pulse Worldwide Headquarters Model: 1204 1 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. PART NUMBER: ANT1204F002R0433A 2 ELECTRICAL SPECIFICATIONS MECHANICALDRAWING Working Frequency Bandwidth ReturnLoss Polarization Azimuth Beamwidth Peak Gain Impedance Operating Temperature Maximum Power Termination Resistance to Soldering Heats NOTE 1. The specification is defined on Pulse 419-44 7MHz / 6.5 dB Min. Linear Omni-directional 0.79 dBi(Typ.) 50 Ω - 40~105 °C 2 W Ni/ Sn(Environmentally-Friendly Leadless) 260 °C , 10sec. evaluation board Dimension L (mm)12.3 ± 0.20 W (mm)4.00 ± 0.20 T (mm)1.60 ± 0.20 A (mm)0.50 ± 0.20 Terminal nameFunction S1Feeding Point S2Soldering Point In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. PART NUMBER: ANT1204F002R0433A 3 REFERENCE DESIGN OF EVALUATION BOARD Outlookand dimension of evaluation board Details of soldering Pad In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. PART NUMBER: ANT1204F002R0433A 4 ELECTRICAL PERFORMANCES Return loss Radiation pattern Marker data 1. 419MHz, -6.5dB 2. 433MHz, -16 dB 3. 447MHz, -6.5dB YNH00131 Y axleX axle Z axle Z X Y Gain (dBi) Evaluation board and XYZ direction Frequency= 433 MHz Max gain = 0.79 dBi, at (150,330) MEG (mean effective gain)= -4.84 dBi Directivity (dB) = 6.35 Efficiency = -5.56dB, 27.79 %

Page1of29FCCID:2ASVG-PEGASUS1ReportNo.:LCSA09073077EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCCTESTREPORT For USSHADECORPORATION PEGASUS TestModel:PEGASUS1 Preparedfor:USSHADECORPORATION Address:9715-BBurnetRd.#400,Austin,TXUSA78758 Preparedby:ShenzhenLCSComplianceTestingLaboratoryLtd. Address:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei, ShajingStreet,BaoanDistrict,Shenzhen,518000,China Tel:(+86)755-82591330 Fax:(+86)755-82591332 Web:www.LCS-cert.com Mail:[email protected] Dateofreceiptoftestsample:September12,2023 Numberoftestedsamples:2 Samplenumber: A09073077-1,A09073077-2 Serialnumber:Prototype DateofTest:September12,2023~September18,2023 DateofReport:September19,2023 Page2of29FCCID:2ASVG-PEGASUS1ReportNo.:LCSA09073077EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCCTESTREPORT FCCCFR47PART15C(15.231) ReportReferenceNo. .................. :LCSA09073077EA DateofIssue .................................... :September19,2023 TestingLaboratoryName...........:ShenzhenLCSComplianceTestingLaboratoryLtd. Address.............................................: 101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei, ShajingStreet,BaoanDistrict,Shenzhen,518000,China TestingLocation/Procedure......... :FullapplicationofHarmonisedstandards■ PartialapplicationofHarmonisedstandards□ Otherstandardtestingmethod□ Applicant’sName..........................:USSHADECORPORATION Address.............................................:9715-BBurnetRd.#400,Austin,TXUSA78758 TestSpecification Standard...........................................: FCCCFR47PART15SubpartC,ANSIC63.10-2013 TestReportFormNo...................:LCSEMC-1.0 TRFOriginator.................................:ShenzhenLCSComplianceTestingLaboratoryLtd. MasterTRF ...................................... :Dated2011-03 ShenzhenLCSComplianceTestingLaboratoryLtd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenLCSComplianceTestingLaboratoryLtd.isacknowledgedascopyrightownerandsourceof thematerial.ShenzhenLCSComplianceTestingLaboratoryLtd.takesnoresponsibilityforandwillnot assumeliabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialdueto itsplacementandcontext. TestItemDescription..................:PEGASUS TradeMark.......................................: N/A TestModel.......................................: PEGASUS1 Ratings..............................................:Input:DC7-28V Result................................................:Positive Compiledby:Supervisedby:Approvedby: RoryHuang/AdministratorCaryLuo/TechniqueprincipalGavinLiang/Manager Page3of29FCCID:2ASVG-PEGASUS1ReportNo.:LCSA09073077EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCC--TESTREPORT EUT.........................................:PEGASUS TestModel...........................:PEGASUS1 Applicant...............................:USSHADECORPORATION Address..................................: 9715-BBurnetRd.#400,Austin,TXUSA78758 Telephone...............................:/ Fax..........................................:/ Manufacturer.......................:USSHADECORPORATION Address...................................:9715-BBurnetRd.#400,Austin,TXUSA78758 Telephone...............................:/ Fax..........................................:/ Factory....................... : USSHADECORPORATION Address...................................:9715-BBurnetRd.#400,Austin,TXUSA78758 Telephone...............................:/ Fax..........................................:/ TestResultPositive Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetestlaboratory. TestReportNo.:LCSA09073077EA September19,2023 Dateofissue Page4of29FCCID:2ASVG-PEGASUS1ReportNo.:LCSA09073077EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity RevisionHistory ReportVersionIssueDateRevisionContentRevisedBy 000September19,2023InitialIssue-- Page5of29FCCID:2ASVG-PEGASUS1ReportNo.:LCSA09073077EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity TABLEOFCONTENTS 1.GENERALINFORMATION.....................................................................................................................................6 1.1.DESCRIPTIONOFDEVICE(EUT)........................................................................................................................6 1.2.OBJECTIVE...........................................................................................................................................................6 1.3.ENVIRONMENTALCONDITIONS............................................................................................................................6 1.4.SUPPORTEQUIPMENTLIST.................................................................................................................................6 1.5.EXTERNALI/OPORT...........................................................................................…

Text truncated - open the document above for the full version.

Page1of2FCCID:2ASVG-PEGASUS1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity TestSetupPhotosoftheEUT TestSetupPhoto(s)ofRadiatedEmissionsMeasurement Fig.1 Fig.2 Page2of2FCCID:2ASVG-PEGASUS1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity TestSetupPhoto(s)ofConductedEmissionsMeasurement Fig.3