2ASVW-BT2-934-2Dash Window Qi Charging Phone holder

FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the follow ing two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, inc luding interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentia l installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televis ion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technic ian for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be insta lled and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Shenzhen Pano Technology Co.,Ltd ProductSimilarityDeclaration Product name:Dash Window Qi Charging Phone holder Model name:BT2-934-2, CCH3360 FCC ID:2ASVW-BT2-934-2 We (Shenzhen Pano Technology Co.,Ltd) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Signature: Name:DerekCheng Title: N/A Place :3F,No.3,YuanhuSciencePark, XinlianCommunity,LongchengStreet,Longgang, Shenzhen Date:2023/03/02

C5266091_X8_Ed.1 1/1 LetterofAuthorization <ShenzhenPanoTechnologyCo.,Ltd> Company:ShenzhenPanoTechnologyCo.,Ltd Address:3F,No.3,YuanhuSciencePark,XinlianCommunity,Longcheng Street,Longgang,Shenzhen ProductName:DashWindowQiChargingPhoneholder ModelNumber:BT2-934-2 CCH3360 FCCIdentifier:2ASVW-BT2-934-2 WeauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdelCarme,s/n, 08193Bellaterra,Spain,toactonourbehalfonallmattersconcerningthe abovenamedequipment. AnyindividualwithinLGAITechnologicalCenterS.A.isauthorizedtoactonour behalfandtakeactionontheapplication. WedeclarethatauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdel Carme,s/n,08193Bellaterra,Spain,isallowedtoforwardallinformation relatedtotheapprovalprojecttotheFederalCommunicationCommissionand todiscussanyissuesconcerningtheapprovalapplication.Anyandallacts carriedoutbyLGAITechnologicalCenterS.A.onourbehalfshallhavethe sameeffectasactsofourown. Name:DerekChengDate:2023-02-27 Title:N/A Signatureofapplicant:

C5266091_X10_Ed.1 1/1 <ShenzhenPanoTechnologyCo.,Ltd> OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:2023-02-27 Subject:RequestforConfidentiality FCCID:2ASVW-BT2-934-2 ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo BlockDiagram Schematics TestReportNoNo TestSetupPhotosNo User’sManual InternalPhotos PartsList/TuneUp RFExposureInfo OperationalDescription CoverLetter(s)NoNo SDRSoftware/SecurityInfoNo Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. Sincerely, Signature: Name:DerekCheng Title:N/A

EUTPHOTO(ExternalPhotos)

Labelandlabellocation ShenzhenPanoTechnologyCo.,Ltd FCCID:2ASVW-BT2-934-2

EUTPHOTO(InternalPhotos) Coil1 ※※※※※ENDOFREPORT※※※※※

FCCID:2ASVW-BT2-934-2 ProductName:DashWindowQiChargingPhoneholder ProductModelNo.: BT2-934-2 CCH3360 TestAuxiliary:Phone,Adapter ModelNo.:DL01,DL02 TransmittingmodeKeeptheEUTincontinuouslywirelesschargingmode Powersupply:Input:DC12V1.25A WirelessOutputPhone:15WMax TestDescription:PhoneBattery>98%,=50%and<1%aretested,andtheworstis<1%. TestModes: Mode1AC/DCAdapter(12V/1.25A)+EUT+MobilePhone(15W)Record Mode2AC/DCAdapter(12V/1.25A)+EUT+MobilePhone(10W) Mode3AC/DCAdapter(12V/1.25A)+EUT+MobilePhone(5W) Note:Alltestmodeswerepre-tested,butweonlyrecordedtheworstcaseinthisreport. RFExposureEvaluation 1MeasuringStandard KDB680106RFExposureWirelessChargingAppsv03r01 2Requirements Accordingtotheitem5ofKDB680106v03r01: Inductivewirelesspowertransferapplicationsthatmeetallofthefollowingrequirementsareexcludedfrom submittinganRFexposureevaluation. (1)Powertransferfrequencyislessthan1MHz. (2)Outputpowerfromeachprimarycoilislessthanorequalto15watts. (3)Thesystemmayconsistofmorethanonesourceprimarycoils,chargingoneormoreclients.Ifmorethan oneprimarycoilispresent,thecoilpairsmaybepoweredonatthesametime. (4)Clientdeviceisplaceddirectlyincontactwiththetransmitter. (5)Mobileexposureconditionsonly(portableexposureconditionsarenotcoveredbythisexclusion). (6)TheaggregateH-fieldstrengthsanywhereatorbeyond15cmsurroundingthedevice,and20cmaway fromthesurfacefromallcoilsthatbydesigncansimultaneouslytransmit,andwhilethosecoilsare simultaneouslyenergized,aredemonstratedtobelessthan50%oftheapplicableMPElimit. Remark:Meetalltheaboverequirements. Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhumanexposure toradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) 3TestSetup 4TestProcedure 1)TheRFexposuretestwasperformedinanechoicchamber. 2)Themeasurementprobewasplacedattestdistance(15cmfromallsidesand20cmfromthetop)whichis betweentheedgeofthechargerandthegeometriccenterofprobe. 3)Thehighestemissionlevelwasrecordedandcomparedwithlimitassoonasmeasurementofeachpoints (A,B,C,D,E)werecompleted. 4)TheEUTwasmeasuredaccordingtothedictatesofKDB680106v03r01. Remark：TheEUT’stestpositionA,B,C,DandEisvalidfortheEandHfieldmeasurements. 5TestInstrumentslist TestEquipmentManufacturerModelNo.SN. Cal.Date (mm-dd-yy) Cal.Duedate (mm-dd-yy) ExposureLevelTesterNardaELT-400N-0231June.262022June.252023 Magneticfieldprobe 100cm 2 NardaELTprobe100cm 2 M0675June.262022June.252023 IsotropicElectricfield probe NardaEP-601611WX70332June.262022June.252023 6TestResult E-FiledStrengthat15cmfromtheedgessurroundingtheEUT(V/m) FrequencyRange (MHz) Test PositionA Test PositionB Test PositionC Test PositionD Limits (V/m) 0.115-0.2050.760.740.750.74614 E-FiledStrengthat20cmfromthetopoftheEUT(V/m) FrequencyRange (MHz) Test PositionE Limits (V/m) 0.115-0.2050.75614 H-FiledStrengthat15cmfromtheedgessurroundingtheEUT(A/m) FrequencyRange (MHz) Test PositionA Test PositionB Test PositionC Test PositionD Limits (A/m) 0.115-0.2050.160.140.140.151.63 H-FiledStrengthat20cmfromthetopoftheEUT(A/m) FrequencyRange (MHz) Test PositionE Limits (A/m) 0.115-0.2050.151.63 7TestSet-upPhoto

产品承认书 SPECIFICATIONFORAPPROVAL 客户 CUSTOMER: 物料名称 MODELNO ： A11 发射线圈 G50 双槽 客户料号 CUSTOMERP/N: 厂商规格 CUSTOMERP/N：20.5*43MM-0.08*105P-6.3UH-5MM 承认书日期 DATE：2022.7.30 制造商确认栏 MANUFACTURERAPPROVED 客户承认栏 CUSTOMERAPPROVED DRAWNBY 刘国君 CONFIRMBY CHECKEDBY钟春华CHECKEDBY 签章 /SIGNATURES: 签章 /SIGNATURES: 深圳市德天电子科技有限公司 SHENZHENDETIANTECHNOLOGYCo.,Ltd 深圳市宝安区观澜大富工业区汇清科技园C栋2F DETIANTechnologypark,HUIQING,guanlanstreet,longhuaDistrict,Shenzhen TEL:+860755-29110900Fax:+860755-29110900 承认书變更 VersionChangeHistory 版本變更前變更後更改日期批准 Rev.BeforeChangeAfterChangeChangeDateApprovedBy A.0 新发行 ----2018/1/8 王明 SHENZHENDETIANTECHNOLOGYCo.,Ltd 産品型號： 版本 客戶CUST: DESC 20.5*43MM-0.08*105P-6.3UH-5MM Rev：A.0 客户料号： A11 一、尺寸DIMENSION:(mm) A 43.0±1.0 B 20.5±0.5 C 1.30Max D 30±3 E 11.0ref F 2-4 G 5.0ref H 50±0.8 I 2.8MAX 注： 1.线圈贴磁片，磁片尺寸 50±0.8mm, 内孔5. 0 mm,厚度为1.0±0.2mm。 2.线圈出线位置缠宽度 8mm±0.5 高温胶纸。 3.线圈用白胶固定。 三、绕线参数WindingSpecification: 序号端子线径圈数绕线方向 NO.TERMINALWIRETurnsWindingDirection 1SF 丝包线0.08*105P 10TsCCW 四、电气特性ELECTRICALCHARACTERISTICS: 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±20% 序号项目端子标准测试条件测试仪器 NO.ITEMTERMINALSPECIFICATIONTESTFREQUENCYTESTEQUIPMENTS 1IND.S-F 3.8uH±20%单独线圈 100KHz/1.0VLCZMETER1062B 2IND.S-F 6.3uH±10%加磁片 100KHz/1.0VLCZMETER1062B 3DCRS-F ≤50mΩ LCZMETER502B 擬制/日期PREPAREDBY/DATE 審核 / 日期 CHECKED BY/DATE 刘国君2022/7/26王争明2022/7/26

ProjectNo.:ZKT-2302070534E Page 1 of 22 FCCTESTREPORT FCCID:2ASVW-BT2-934-2 ReportNumber. .................................. :ZKT-2302070534E DateofTest ....................................................... : Feb.07,2023toFeb.13,2023 Dateofissue.........................................: Feb.13,2023 Totalnumberofpages..........................22 TestResult .......................................... : PASS TestingLaboratory............................: ShenzhenZKTTechnologyCo.,Ltd. Address ............................................... : 1/F,No.101,BuildingB,No.6,TangweiCommunityIndustrial Avenue,FuhaiStreet,Bao'anDistrict,Shenzhen,China Applicant'sname.............................:ShenzhenPanoTechnologyCo.,Ltd Address...............................................: 3F,No.3,YuanhuSciencePark,XinlianCommunity,Longcheng Street,Longgang,Shenzhen Manufacturer'sname......................:ShenzhenPanoTechnologyCo.,Ltd Address...............................................: 3F,No.3,YuanhuSciencePark,XinlianCommunity,Longcheng Street,Longgang,Shenzhen Testspecification: Standard................................................:FCCCFRTitle47Part15SubpartC Testprocedure.....................................: / Non-standardtestmethod................:N/A TestReportFormNo........................: TRF-EL-107_V0 TestReportForm(s)Originator.....: ZKTTesting MasterTRF ........................................ : Dated:2020-01-06 ThisdevicedescribedabovehasbeentestedbyZKT,andthetestresultsshowthattheequipmentunder test(EUT)isincompliancewiththeFCCrequirements.Anditisapplicableonlytothetestedsample identifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofZKT,thisdocumentmay bealteredorrevisedbyZKT,personalonly,andshallbenotedintherevisionofthedocument. Productname.....................................:DashWindowQiChargingPhoneholder Trademark...........................................: Bracketron Model/Typereference.........................:BT2-934-2 CCH3360 Ratings..................................................: Input:DC12V1.25A WirelessOutputPhone:15WMax ProjectNo.:ZKT-2302070534E Page 2 of 22 Testingprocedureandtestinglocation: TestingLaboratory.......................................:ShenzhenZKTTechnologyCo.,Ltd. Address............................................................:1/F,No.101,BuildingB,No.6,TangweiCommunity IndustrialAvenue,FuhaiStreet,Bao'anDistrict, Shenzhen,China TomZou Testedby(name+signature).......................: JacksonFang Reviewer(name+signature).......................: LakeXie Approved(name+signature) ....................... : ProjectNo.:ZKT-2302070534E Page 3 of 22 TABLEOFCONTENTS 1.VERSION.......................................................................................................................................4 2.TESTSUMMARY........................................................................................................................5 2.1TESTFACILITY....................................................................................................................................6 2.2MEASUREMENTUNCERTAINTY....................................................................................................6 3.GENERALINFORMATION......................................................................................................7 3.1GENERALDESCRIPTIONOFEUT..................................................................................................7 3.2Testmode..............................................................................................................................................7 3.3BlockDiagramofEUTConfiguration................................................................................................8 3.4TestConditions.....................................................................................................................................8 3.5DescriptionOfSupportUnits(ConductedMode)............................................................................8 3.6EQUIPMENTSLISTFORALLTESTITEMS..................................................................................9 4.CONDUCTEDEMISSIONTEST............................................................................................10 4.1CONDUCTEDEMISSIONMEASUREMENT................................................................................10 4.1.1POWERLINECONDUCTEDEMISSIONLimits........................................................................10 4.1.2TESTPROCEDURE.......................................................................................................................10 4.1.3DEVIATIONFROMTESTSTANDARD.......................................................................................11 4.1.4TESTSETUP...................................................................................................................................11 4.1.5EUTOPERATINGCONDITIONS.................................................................................................11 4.1.6TestResult.......................................................................................................................................11 5.RADIATEDEMISSIONMEASUREMENT............................................................................14 5.1RadiatedEmissionLimits..................................................................................................................14 5.2AnechoicChamberTestSetupDiagram........................................................................................15 5.3TestProcedure....................................................................................................................................15 5.4DEVIATIONFROMTESTSTANDARD..........................................................................................15 5.5TestResult...........................................................................................................................................16 6.BANDWID…

Text truncated - open the document above for the full version.

EUTTESTPHOTO