2ASWW-FLIPKFeature phone

XINCHUANGXININTERNATIONALCO.,LTD * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter October19,2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2ASWW‐FLIPK FRN:0028367951 Per section 2.911(d)(7) of the FCC rules, (“ XINCHUANGXININTERNATIONALCO.,LTD ”) certifies that the equipment for which authorization is sought is designated to thefollowing U.S. Designated agent* for service of process: Company Name: GlobalProductServicesandConsultationLLC Physical U.S. Company Address: 328WPalmAve,Monrovia.CA91016 Agent name: MichaelChan Agent Email Address: [email protected] FRN: 0033406703 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:Designated Agent Signed: (Required, if different to Applicant): Signed:Signed: Printed name: Lyra.lv Printed name: MichaelChan Title: sales Title: TechnicalDirector Company Name: XINCHUANGXIN INTERNATIONALCO.,LTD Company Name: GlobalProductServices andConsultationLLC Date: October18,2023 Date: October18,2023 气 SC3106133

XINCHUANGXIN INTERNATIONAL CO.,LTD Covered Equipment Certification Attestation Letter 10/18/2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2ASWW‐FLIPK (XINCHUANGXININTERNATIONALCO.,LTD) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the currentCovered List , the applicant should include an explanation on why the equipment is not “covered” equipment. ( XINCHUANGXININTERNATIONALCO.,LTD ) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Lyra.lv Title: sales Company Name: XINCHUANGXININTERNATIONALCO.,LTD Date: 10/18/2023 气

2023‐10‐18 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appointShenzhen Huatongwei International Inspection Co., Ltd./ 1/F, Bldg 3, Hongfa Hi-tech Industrial Park, Genyu Road, Tianliao, Gongming, Shenzhen, China/Xu Yang,. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in theFederal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with XINCHUANGXIN INTERNATIONAL CO.,LTD / ROOM 605 6/F, FA YUEN COMMERCIAL BUILDING, 75-77 FAYUEN STREET MONGKOK KL Agency agreement expiration date: 2024‐10‐18 By: Lyra.lv SignaturePrinted On behalf of : XINCHUANGXININTERNATIONALCO.,LTD Telephone: 0085260675697 气

2023‐10‐18 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:2ASWW‐FLIPK Product Name: Featurephone Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics  Block diagram Operation description  Tune up Procedure  BOM These materials contain trade secrets and proprietary information and arenot customarily released to the public. Thepublic disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. By: Lyra.lv SignaturePrinted On behalf of : XINCHUANGXININTERNATIONALCO.,LTD Telephone: 0085260675697 气

External photos

Internal photos

Page: 1 of 34 TEST REPORT For SAR Report No. ...................................... : CHTEW23100037 Report Verification: Project No. ...................................... : SHT2309044602EW FCC ID ............................................. : 2ASWW-FLIPK Applicant’s name ........................... : XINCHUANGXIN INTERNATIONAL CO.,LTD Address ............................................. : ROOM 605 6/F, FA YUEN COMMERCIAL BUILDING, 75-77 FA YUEN STREET MONGKOK KL Test item description .................... : Feature phone Trade Mark ....................................... : CORN Model/Type reference ....................... : Flip K Listed Model(s) ................................. : - Standard ......................................... : FCC 47 CFR Part2.1093 IEEE Std C95.1: 1999 Edition IEEE Std 1528: 2013 Date of receipt of test sample..........: Sep. 14, 2023 Date of testing..............................: Sep. 14, 2023- Oct. 10, 2023 Date of issue...............................: Oct. 16, 2023 Result .................. ........................: PASS Compiled by ( position+printedname+signature) ... : File administrators Xiaodong Zhao Supervised by ( position+printedname+signature) ... : Project Engineer Xiaodong Zhao Approved by ( position+printedname+signature) ... : Manager Xu Yang Testing Laboratory Name ............. : Shenzhen Huatongwei International Inspection Co., Ltd Address ............................................. : 1/F, Bldg 3, Hongfa Hi-tech Industrial Park, Genyu Road, Tianliao, Gongming, Shenzhen, China Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report merely correspond to the test sample. Report No.: CHTEW23100037 Page: 2 of 34 Issued: 2023-10-16 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V05 (2023-03) Contents 1. Statement of Compliance 3 2. Test Standards and Report version 4 2.1. Test Standards 4 2.2. Report version 4 3. Summary 5 3.1. Client Information 5 3.2. Product Description 5 3.3. RF Specification Description 6 3.4. Testing Laboratory Information 6 3.5. Environmental conditions 6 4. Equipments Used during the Test 7 5. Measurement Uncertainty 8 6. SAR Measurement System Configuration 9 6.1. SAR Measurement Set-up 9 6.2. DASY5 E-field Probe System 10 6.3. Phantoms 11 6.4. Device Holder 11 7. SAR Test Procedure 12 7.1. Scanning Procedure 12 7.2. Data Storage and Evaluation 14 8. Position of the wireless device in relation to the phantom 16 8.1. Head Position 16 8.2. Body Position 17 8.3. Hotspot Mode Exposure conditions 17 9. Dielectric Property Measurements & System Check 18 9.1. Tissue Dielectric Parameters 18 9.2. System Check 19 10. SAR Exposure Limits 27 11. Conducted Power Measurement Results and Tune-up 28 12. Measured and Reported SAR Results 30 13. Simultaneous Transmission analysis 32 14. Test Setup Photos 33 15. External and Internal Photos of the EUT 34 Report No.: CHTEW23100037 Page: 3 of 34 Issued: 2023-10-16 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V05 (2023-03) 1. Statement of Compliance Maximum Reported SAR (W/kg @1g) Type Test setting PCE BT Simultaneous TX Head Cheek 0.367 0.006 0.371 Body-worn Dist.= 15mm 0.776 0.006 0.782 Note: 1. This device is in compliance with Specific Absorption Rate (SAR) for general population/uncontrolled exposure limits (1.6 W/kg@1g) specified in FCC 47 CFR part 2 (2.1093) and IEEE Std C95.1, 2. This device had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and FCC KDB publications. Report No.: CHTEW23100037 Page: 4 of 34 Issued: 2023-10-16 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V05 (2023-03) 2. Test Standards and Report version 2.1. Test Standards The tests were performed according to following standards: FCC 47 Part 2.1093: Radiofrequency radiation exposure evaluation: portable devices. IEEE Std C95.1, 1999 Edition: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz IEEE Std 1528™-2013: IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques. FCC published RF exposure KDB procedures: 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04: SAR Measurement Requirements for 100 MHz to 6 GHz 865664 D02 RF Exposure Reporting v01r02: RF Exposure Compliance Reporting and Documentation Considerations 447498 D04 Interim General RF Exposure Guidance v01: Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies 648474 D04 Handset SAR v01r03: SAR Evaluation Considerations for Wireless Handsets 941225 D01 3G SAR Procedures v03r01: SAR Measurement Procedures for 3G Devices 941225 D05 SAR for LTE Devices v02r05: SAR Evaluation Considerations for LTE Devices TCB workshop April, 2019; Page 19, Tissue Simulating Liquids (TSL) 2.2. Report version Revision No. Date of issue Description N/A 2023-10-16 Original Report No.: CHTEW23100037 Page: 5 of 34 Issued: 2023-10-16 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V05 (2023-03) 3. Summary 3.1. Client Information Applicant: XINCHUANGXIN INTERNATIONAL CO.,LTD Address: ROOM 605 6/F, FA YUEN COMMERCIAL BUILDING, 75-77 FA YUEN STREET MONGKOK KL Manufacturer: Shenzhen Chiteng Technology Co.,LTD Address: Second Floor,Area A, Building 4, Huiye Technology Workshop, Guanguang Road, Tangjia Community, Gongmin…

Text truncated - open the document above for the full version.

Test Laboratory: Huatongwei International Inspection Co., Ltd.,SAR LabDate: 9/28/2023 LTE Band 7 Head Communication System: UID 0, Generic LTE-FDD (0); Frequency: 2560 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2560 MHz; σ = 1.901 S/m; ε r = 39.967; ρ = 1000 kg/m 3 Phantom section: Right Section Ambient Temperature:22.7°C;Liquid Temperature:22.2°C; DASY Configuration: lProbe: EX3DV4 - SN7494; ConvF(7.83, 7.83, 7.83) @ 2560 MHz; Calibrated: 4/17/2023 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1549; Calibrated: 3/27/2023 lPhantom: Twin-SAM V8.0 ; Type: QD 000 P41 AA; Serial: 1974 lDASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Right Touch Check/CH21350/Area Scan (61x161x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.136 W/kg Right Touch Check/CH21350/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.548 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 0.156 W/kg SAR(1 g) = 0.090 W/kg; SAR(10 g) = n.a. Maximum value of SAR (measured) = 0.132 W/kg 0 dB = 0.132 W/kg = -8.80 dBW/kg Appendix D: SAR Test Data Plots Plot No.8 Test Laboratory: Huatongwei International Inspection Co., Ltd.,SAR LabDate: 9/27/2023 LTE Band 12 Head Communication System: UID 0, Generic LTE-FDD (0); Frequency: 711 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 711 MHz; σ = 0.886 S/m; ε r = 43.176; ρ = 1000 kg/m 3 Phantom section: Left Section Ambient Temperature:22.7°C;Liquid Temperature:22.2°C; DASY Configuration: lProbe: EX3DV4 - SN7494; ConvF(10.8, 10.8, 10.8) @ 711 MHz; Calibrated: 4/17/2023 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1549; Calibrated: 3/27/2023 lPhantom: Twin-SAM V8.0 ; Type: QD 000 P41 AA; Serial: 1974 lDASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Left Touch Check/CH23130/Area Scan (51x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.113 W/kg Left Touch Check/CH23130/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.001 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 0.138 W/kg SAR(1 g) = 0.083 W/kg; SAR(10 g) = 0.054 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.117 W/kg 0 dB = 0.117 W/kg = -9.33 dBW/kg Appendix D: SAR Test Data Plots Plot No.9 Test Laboratory: Huatongwei International Inspection Co., Ltd.,SAR LabDate: 9/27/2023 LTE Band 17 Head Communication System: UID 0, Generic LTE-FDD (0); Frequency: 710 MHz;Duty Cycle: 1:1 Medium parameters used: f = 710 MHz; σ = 0.886 S/m; ε r = 43.179; ρ = 1000 kg/m 3 Phantom section: Left Section Ambient Temperature:22.7°C;Liquid Temperature:22.2°C; DASY Configuration: lProbe: EX3DV4 - SN7494; ConvF(10.8, 10.8, 10.8) @ 710 MHz; Calibrated: 4/17/2023 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1549; Calibrated: 3/27/2023 lPhantom: Twin-SAM V8.0 ; Type: QD 000 P41 AA; Serial: 1974 lDASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Left Touch Check/CH23790/Area Scan (51x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.116 W/kg Left Touch Check/CH23790/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.027 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 0.141 W/kg SAR(1 g) = 0.084 W/kg; SAR(10 g) = 0.054 W/kg Maximum value of SAR (measured) = 0.119 W/kg 0 dB = 0.119 W/kg = -9.24 dBW/kg Appendix D: SAR Test Data Plots Plot No.10 Test Laboratory: Huatongwei International Inspection Co., Ltd.,SAR LabDate: 9/27/2023 LTE Band 66 Head Communication System: UID 0, Generic LTE-FDD (0); Frequency: 1745 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1745 MHz; σ = 1.378 S/m; ε r = 41.403; ρ = 1000 kg/m 3 Phantom section: Right Section Ambient Temperature:22.7°C;Liquid Temperature:22.2°C; DASY Configuration: lProbe: EX3DV4 - SN7494; ConvF(8.99, 8.99, 8.99) @ 1745 MHz; Calibrated: 4/17/2023 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1549; Calibrated: 3/27/2023 lPhantom: Twin-SAM V8.0 ; Type: QD 000 P41 AA; Serial: 1974 lDASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Right Touch Check/CH132322/Area Scan (51x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.373 W/kg Right Touch Check/CH132322/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.650 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 0.459 W/kg SAR(1 g) = 0.290 W/kg; SAR(10 g) = 0.175 W/kg Maximum value of SAR (measured) = 0.401 W/kg 0 dB = 0.373 W/kg = -4.28 dBW/kg Appendix D: SAR Test Data Plots Plot No.11 Test Laboratory: Huatongwei International Inspection Co., Ltd.,SAR LabDate: 9/28/2023 BT Head Communication System: UID 0, Generic BT (0); Frequency: 2402 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2402 MHz; σ = 1.771 S/m; ε r = 40.217; ρ = 1000 kg/m 3 Phantom section: Left Section Ambient Temperature:22.7°C;Liquid Temperature:22.2°C; DASY Configuration: lProbe: EX3DV4 - SN7494; ConvF(8.01, 8.01, 8.01) @ 2402 MHz; Calibrated: 4/17/2023 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1549; Calibrated: 3/27/2023 lPhantom: Twin-SAM V8.0 ; Type: QD 000 P41 AA; Serial: 1974 lDASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Left Touch Check/CH0/Area Scan (61x161x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.0108 W/kg Left Touch Check/CH0/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.763 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 0.00548 W/kg SAR(1 g) = 0.00387 W/kg; SAR(10 g) = 0.00286 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.00512 W/kg 0 dB = 0.00512 W/kg = -22.91 dBW/kg Ap…

Text truncated - open the document above for the full version.

Test Laboratory: Huatongwei International Inspection Co., Ltd.,SAR LabDate: 9/27/2023 LTE Band 17 Body-worn Communication System: UID 0, Generic LTE-FDD (0); Frequency: 710 MHz;Duty Cycle: 1:1 Medium parameters used: f = 710 MHz; σ = 0.886 S/m; ε r = 43.179; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature:22.7°C;Liquid Temperature:22.2°C; DASY Configuration: lProbe: EX3DV4 - SN7494; ConvF(10.8, 10.8, 10.8) @ 710 MHz; Calibrated: 4/17/2023 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1549; Calibrated: 3/27/2023 lPhantom: Twin-SAM V8.0 ; Type: QD 000 P41 AA; Serial: 1974 lDASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Rear/CH23790/Area Scan (51x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.218 W/kg Rear/CH23790/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 14.34 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.262 W/kg SAR(1 g) = 0.149 W/kg; SAR(10 g) = 0.102 W/kg Maximum value of SAR (measured) = 0.206 W/kg 0 dB = 0.218 W/kg = -6.62 dBW/kg Appendix D: SAR Test Data Plots Plot No.22 Test Laboratory: Huatongwei International Inspection Co., Ltd.,SAR LabDate: 9/27/2023 LTE Band 66 Body-worn Communication System: UID 0, Generic LTE-FDD (0); Frequency: 1745 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1745 MHz; σ = 1.378 S/m; ε r = 41.403; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature:22.7°C;Liquid Temperature:22.2°C; DASY Configuration: lProbe: EX3DV4 - SN7494; ConvF(8.99, 8.99, 8.99) @ 1745 MHz; Calibrated: 4/17/2023 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1549; Calibrated: 3/27/2023 lPhantom: Twin-SAM V8.0 ; Type: QD 000 P41 AA; Serial: 1974 lDASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Rear 15mm/CH132322/Area Scan (51x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.05 W/kg Rear 15mm/CH132322/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.47 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 1.21 W/kg SAR(1 g) = 0.685 W/kg; SAR(10 g) = 0.385 W/kg Maximum value of SAR (measured) = 1.01 W/kg 0 dB = 1.05 W/kg = 0.22 dBW/kg Appendix D: SAR Test Data Plots Plot No.23 Test Laboratory: Huatongwei International Inspection Co., Ltd.,SAR LabDate: 9/28/2023 BT Body-worn Communication System: UID 0, Generic BT (0); Frequency: 2402 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2402 MHz; σ = 1.771 S/m; ε r = 40.217; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature:22.7°C;Liquid Temperature:22.2°C; DASY Configuration: lProbe: EX3DV4 - SN7494; ConvF(8.01, 8.01, 8.01) @ 2402 MHz; Calibrated: 4/17/2023 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1549; Calibrated: 3/27/2023 lPhantom: Twin-SAM V8.0 ; Type: QD 000 P41 AA; Serial: 1974 lDASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Rear 15mm/CH0/Area Scan (61x101x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.0158 W/kg Rear 15mm/CH0/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.867 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 0.00824 W/kg SAR(1 g) = 0.00443 W/kg; SAR(10 g) = 0.00348 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.00676 W/kg 0 dB = 0.0158 W/kg = -18.02 dBW/kg Appendix D: SAR Test Data Plots Plot No.24 Appendix E: DAE and Probe Calibration Certificate 1 of 12 1. DAE4 Calibration Certificate Appendix E: DAE and Probe Calibration Certificate 2 of 12 Appendix E: DAE and Probe Calibration Certificate 3 of 12 Appendix E: DAE and Probe Calibration Certificate 4 of 12 2. Probe Calibration Certificate Appendix E: DAE and Probe Calibration Certificate 5 of 12 Appendix E: DAE and Probe Calibration Certificate 6 of 12 Appendix E: DAE and Probe Calibration Certificate 7 of 12 Appendix E: DAE and Probe Calibration Certificate 8 of 12 Appendix E: DAE and Probe Calibration Certificate 9 of 12 Appendix E: DAE and Probe Calibration Certificate 10 of 12 Appendix E: DAE and Probe Calibration Certificate 11 of 12 Appendix E: DAE and Probe Calibration Certificate 12 of 12 Appendix F: Dipole Calibration Certificate 1 of 42 1.1. D750V3 Dipole Calibration Certificate Appendix F: Dipole Calibration Certificate 2 of 42 Appendix F: Dipole Calibration Certificate 3 of 42 Appendix F: Dipole Calibration Certificate 4 of 42 Appendix F: Dipole Calibration Certificate 5 of 42 Appendix F: Dipole Calibration Certificate 6 of 42 Appendix F: Dipole Calibration Certificate 7 of 42 Extended Dipole Calibrations Referring to KDB865664 D01, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Head-750 Date of measurement Return-loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary impedance (ohm) Delta (ohm) 2021-01-22 -28.6 53.6 -1.34 2022-01-17 -28.1 -1.75 53.5 0.1 -1.11 0.23 2023-01-15 -28.3 -1.05 53.3 0.3 -1.22 0.12 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5ohm of prior calibration. Therefore the verification result should support extended calibration. Appendix F: Dipole Calibration Certificate 8 of 42 1.2. D835V2 Dipole Calibration Certificate Appendix F: Dipole Calibration Certificate 9 of 42 Appendix F: Dipole Calibration Certificate 10 of 42 Appendix F: Dipole Calibration Certificate 11 of 42 Appendix F: Dipole Calibration Certificate 12 of 42 Appendix F: Dipole Calibration Certificate 13 of 42 Appendix F: Dipole Calibration Certificate 14 of 42 Extended Dipole Calibrations Referring to KDB865664 D01, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior…

Text truncated - open the document above for the full version.

Appendix F: Dipole Calibration Certificate 37 of 42 Appendix F: Dipole Calibration Certificate 38 of 42 Appendix F: Dipole Calibration Certificate 39 of 42 Appendix F: Dipole Calibration Certificate 40 of 42 Appendix F: Dipole Calibration Certificate 41 of 42 Appendix F: Dipole Calibration Certificate 42 of 42 Extended Dipole Calibrations Referring to KDB865664 D01, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Head-2600 Date of measurement Return-loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary impedance (ohm) Delta (ohm) 2022-01-25 -23.6 49.5 -6.58 2022-01-17 -24.0 1.69 49.1 0.4 -6.03 0.55 2023-01-15 -23.8 0.85 49.3 0.2 -6.33 0.25 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5ohm of prior calibration. Therefore the verification result should support extended calibration.

Page: 1 of 34 TEST REPORT For Bluetooth-EDR Report No. ...................................... : CHTEW23100035 Report Verification: Project No.................................： SHT2309044601EW FCC ID ............................................. : 2ASWW-FLIPK Applicant’s name ........................... : XINCHUANGXIN INTERNATIONAL CO.,LTD Address ............................................. : ROOM 605 6/F, FA YUEN COMMERCIAL BUILDING, 75-77 FA YUEN STREET MONGKOK KL Product Name ................................ : Feature phone Trade Mark ....................................... : CORN Model No. ......................................... : Flip K Listed Model(s) ................................. : - Standard ......................................... : FCC CFR Title 47 Part 15 Subpart C § 15.247 Date of receipt of test sample..........: Sep. 14, 2023 Date of testing.............................: Sep. 14, 2023- Oct. 10, 2023 Date of issue...............................: Oct. 13, 2023 Result .................. ........................: PASS Compiled by ( Position+Printed name+Signature): File administrators Xiaodong Zhao Supervised by (Position+Printed name+Signature): Project Engineer Xiaodong Zhao Approved by (Position+Printed name+Signature): Manager Xu Yang Testing Laboratory Name ............. : Shenzhen Huatongwei International Inspection Co., Ltd. Address ............................................. : 1/F, Bldg 3, Hongfa Hi-tech Industrial Park, Genyu Road, Tianliao, Gongming, Shenzhen, China Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report merely correspond to the test sample. Report No.: CHTEW23100035 Page: 2 of 34 Date of issue: 2023-10-13 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V05(2023-03) Contents 1. TEST S T A N D A R D S A N D R E P O R T V E R S I O N 3 1.1. Test Standards 3 1.2. Report version 3 2. TEST DESCRIPTION 4 3. SUMMARY 5 3.1. Client Information 5 3.2. Product Description 5 3.3. Radio Specification Description 5 3.4. Testing Laboratory Information 6 4. TEST CONFIGURATION 7 4.1. Test frequency list 7 4.2. Descriptions of Test mode 7 4.3. Test mode 7 4.4. Test sample information 8 4.5. Support unit used in test configuration and system 8 4.6. Testing environmental condition 8 4.7. Statement of the measurement uncertainty 9 4.8. Equipment Used during the Test 10 5. TEST CONDITIONS AND RESULTS 12 5.1. Antenna Requirement 12 5.2. AC Conducted Emission 13 5.3. Peak Output Power 15 5.4. 20 dB Bandwidth 16 5.5. 99% Occupied Bandwidth 17 5.6. Carrier Frequencies Separation 18 5.7. Hopping Channel Number 19 5.8. Dwell Time 20 5.9. Duty Cycle Correction Factor (DCCF) 21 5.10. Pseudorandom Frequency Hopping Sequence 22 5.11. Conducted Band edge and Spurious Emission 23 5.12. Radiated Band edge Emission 25 5.13. Radiated Spurious Emission 27 6. TEST SETUP PHOTOS 32 7. EXTERNAL AND INTERNAL PHOTOS 34 8. APPENDIX REPORT 34 Report No.: CHTEW23100035 Page: 3 of 34 Date of issue: 2023-10-13 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V05(2023-03) 1. TEST STANDARDS AND REPORT VERSION 1.1. Test Standards The tests were performed according to following standards: ‒ FCC CFR Title 47 Part 15 Subpart C § 15.247: Operation within the bands 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz ‒ ANSI C63.10:2020: American National Standard for Testing Unlicensed Wireless Devices ‒ KDB 558074 D01 15.247 Meas Guidance v05r02: Guidance for Compliance Measurements on Digital Transmission System, Frequency Hopping Spread Spectrum System, and Hybrid System Devices Operating under Section 15.247 of The FCC Rules 1.2. Report version Revision No. Date of issue Description N/A 2023-10-13 Original Report No.: CHTEW23100035 Page: 4 of 34 Date of issue: 2023-10-13 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V05(2023-03) 2. TEST DESCRIPTION Report clause Test Items Standard Requirement Result Test Engineer 5.1 Antenna Requirement 15.203/15.247 (c) PASS Xiaodong Zhao 5.2 AC Conducted Emission 15.207 PASS Junman Wang 5.3 Peak Output Power 15.247 (b)(1) PASS Xiaodong Zhao 5.4 20 dB Bandwidth 15.247 (a)(1) PASS Xiaodong Zhao 5.5 99% Occupied Bandwidth - PASS *1 Xiaodong Zhao 5.6 Carrier Frequency Separation 15.247 (a)(1) PASS Xiaodong Zhao 5.7 Hopping Channel Number 15.247 (a)(1) PASS Xiaodong Zhao 5.8 Dwell Time 15.247 (a)(1) PASS Xiaodong Zhao 5.9 Duty Cycle Correction Factor - PASS *1 Xiaodong Zhao 5.10 Pseudorandom Frequency Hopping Sequence 15.247(b)(4) PASS Xiaodong Zhao 5.11 Conducted Band Edge and Spurious Emission 15.247(d)/15.205 PASS Xiaodong Zhao 5.12 Radiated Band Edge Emission 15.205/15.209 PASS Yifan Wang 5.13 Radiated Spurious Emission 15.247(d)/15.205/15.209 PASS Yifan Wang Note: ‒ The measurement uncertainty is not included in the test result. ‒ *1: No requirement on standard, only report these test data. Report No.: CHTEW23100035 Page: 5 of 34 Date of issue: 2023-10-13 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V05(2023-03) 3. SUMMARY 3.1. Client Information Applicant: XINCHUANGXIN INTERNATIONAL CO.,LTD Address: ROOM 605 6/F, FA YUEN COMMERCIAL BUILDING, 75-77 FA YUEN STREET MONGKOK KL Manufacturer: Shenzhen Chiteng Technology Co.,LTD Address: Second Floor,Area A, Building 4, Huiye Technology Workshop, Guanguang Road, Tangjia Community, Gongming Street, Guangming New District, Shenzhen, Guangdong 3.2. Product Description Main unit information: Product Name: Feature phone T…

Text truncated - open the document above for the full version.

Project No.: SHT2309044601EW Radio Specification: Bluetooth EDR Shenzhen Huatongwei International Inspection Co., Ltd. Appendix report page: 1 of 41 APPENDIX REPORT Project No. SHT2309044601EW Radio Specification Bluetooth EDR Test sample No. YPHT23090446001_01 Model No. Flip K Start test date 2023-09-27 Finish date 2023-09-27 Temperature 23.7°C Humidity 49% Test Engineer Xiaodong …

Text truncated - open the document above for the full version.