2ASWWTAB4GTablet

FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR Information Statement Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.438W/Kg and when worn on the body, as described in this user guide, is 1.075W/Kg (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: 2ASWWTAB4G Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

Report No.: JYTSZ-R12-2600631 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607086 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 60 of 130 Band17-10MHz-QPSK-23800-50RB#0 Band17-10MHz-16QAM-23780-50RB#0 Band17-10MHz-16QAM-23790-50RB#0 Band17-10MHz-16QAM-23800-50RB#0 Report No.: JYTSZ-R12-2600631 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607086 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 61 of 130 Appendix D: Band Edge Test Result (worst case) Band Bandwidth Modulation Channel RB Config. Result (dBm) Verdict Band2 1.4MHz QPSK 18607 1RB#0 -38.54,-26.84 PASS Band2 1.4MHz QPSK 18607 1RB#5 -40.29,-45.03 PASS Band2 1.4MHz QPSK 18607 6RB#0 -33.54,-35.17 PASS Band2 1.4MHz QPSK 19193 1RB#0 -45.00,-41.54 PASS Band2 1.4MHz QPSK 19193 1RB#5 -28.41,-38.90 PASS Band2 1.4MHz QPSK 19193 6RB#0 -36.55,-38.00 PASS Band2 1.4MHz 16QAM 18607 1RB#0 -37.57,-25.54 PASS Band2 1.4MHz 16QAM 18607 1RB#5 -39.54,-44.79 PASS Band2 1.4MHz 16QAM 18607 6RB#0 -31.98,-33.72 PASS Band2 1.4MHz 16QAM 19193 1RB#0 -41.55,-41.13 PASS Band2 1.4MHz 16QAM 19193 1RB#5 -27.62,-37.29 PASS Band2 1.4MHz 16QAM 19193 6RB#0 -36.90,-36.32 PASS Band2 20MHz QPSK 18700 1RB#0 -46.54,-37.36 PASS Band2 20MHz QPSK 18700 1RB#99 -42.92,-54.45 PASS Band2 20MHz QPSK 18700 100RB#0 -35.42,-38.94 PASS Band2 20MHz QPSK 19100 1RB#0 -55.13,-49.67 PASS Band2 20MHz QPSK 19100 1RB#99 -38.08,-47.16 PASS Band2 20MHz QPSK 19100 100RB#0 -40.31,-37.60 PASS Band2 20MHz 16QAM 18700 1RB#0 -46.84,-37.46 PASS Band2 20MHz 16QAM 18700 1RB#99 -41.73,-54.33 PASS Band2 20MHz 16QAM 18700 100RB#0 -35.92,-39.70 PASS Band2 20MHz 16QAM 19100 1RB#0 -53.79,-49.93 PASS Band2 20MHz 16QAM 19100 1RB#99 -39.08,-47.57 PASS Band2 20MHz 16QAM 19100 100RB#0 -41.18,-38.64 PASS Band4 1.4MHz QPSK 19957 1RB#0 -32.08,-29.69 PASS Band4 1.4MHz QPSK 19957 1RB#5 -40.96,-46.51 PASS Band4 1.4MHz QPSK 19957 6RB#0 -31.89,-32.32 PASS Band4 1.4MHz QPSK 20393 1RB#0 -46.21,-41.79 PASS Band4 1.4MHz QPSK 20393 1RB#5 -28.83,-36.13 PASS Band4 1.4MHz QPSK 20393 6RB#0 -34.99,-33.13 PASS Band4 1.4MHz 16QAM 19957 1RB#0 -32.72,-29.04 PASS Band4 1.4MHz 16QAM 19957 1RB#5 -40.80,-45.27 PASS Band4 1.4MHz 16QAM 19957 6RB#0 -33.10,-33.47 PASS Band4 1.4MHz 16QAM 20393 1RB#0 -46.61,-41.63 PASS Band4 1.4MHz 16QAM 20393 1RB#5 -31.71,-36.70 PASS Band4 1.4MHz 16QAM 20393 6RB#0 -36.27,-35.02 PASS Report No.: JYTSZ-R12-2600631 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607086 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 62 of 130 Band4 20MHz QPSK 20050 1RB#0 -43.60,-34.89 PASS Band4 20MHz QPSK 20050 1RB#99 -47.35,-52.02 PASS Band4 20MHz QPSK 20050 100RB#0 -30.99,-34.45 PASS Band4 20MHz QPSK 20300 1RB#0 -31.19,-32.45 PASS Band4 20MHz QPSK 20300 1RB#99 -34.00,-44.20 PASS Band4 20MHz QPSK 20300 100RB#0 -38.90,-33.26 PASS Band4 20MHz 16QAM 20050 1RB#0 -44.45,-35.98 PASS Band4 20MHz 16QAM 20050 1RB#99 -46.36,-54.27 PASS Band4 20MHz 16QAM 20050 100RB#0 -31.89,-35.56 PASS Band4 20MHz 16QAM 20300 1RB#0 -32.69,-32.68 PASS Band4 20MHz 16QAM 20300 1RB#99 -34.34,-44.48 PASS Band4 20MHz 16QAM 20300 100RB#0 -36.86,-33.43 PASS Band5 1.4MHz QPSK 20407 1RB#0 -43.02,-30.48 PASS Band5 1.4MHz QPSK 20407 1RB#5 -52.95,-36.27 PASS Band5 1.4MHz QPSK 20407 6RB#0 -48.45,-38.79 PASS Band5 1.4MHz QPSK 20643 1RB#0 -35.82,-53.37 PASS Band5 1.4MHz QPSK 20643 1RB#5 -29.78,-42.25 PASS Band5 1.4MHz QPSK 20643 6RB#0 -36.49,-50.01 PASS Band5 1.4MHz 16QAM 20407 1RB#0 -43.46,-35.30 PASS Band5 1.4MHz 16QAM 20407 1RB#5 -52.90,-35.69 PASS Band5 1.4MHz 16QAM 20407 6RB#0 -49.62,-39.93 PASS Band5 1.4MHz 16QAM 20643 1RB#0 -35.24,-53.16 PASS Band5 1.4MHz 16QAM 20643 1RB#5 -34.35,-42.18 PASS Band5 1.4MHz 16QAM 20643 6RB#0 -37.58,-49.88 PASS Band5 10MHz QPSK 20450 1RB#0 -55.42,-29.13 PASS Band5 10MHz QPSK 20450 1RB#49 -39.38,-50.47 PASS Band5 10MHz QPSK 20450 50RB#0 -42.39,-34.77 PASS Band5 10MHz QPSK 20600 1RB#0 -47.59,-36.42 PASS Band5 10MHz QPSK 20600 1RB#49 -30.53,-51.53 PASS Band5 10MHz QPSK 20600 50RB#0 -38.04,-45.71 PASS Band5 10MHz 16QAM 20450 1RB#0 -55.68,-30.24 PASS Band5 10MHz 16QAM 20450 1RB#49 -39.19,-49.09 PASS Band5 10MHz 16QAM 20450 50RB#0 -45.48,-39.29 PASS Band5 10MHz 16QAM 20600 1RB#0 -49.99,-35.87 PASS Band5 10MHz 16QAM 20600 1RB#49 -29.07,-51.77 PASS Band5 10MHz 16QAM 20600 50RB#0 -35.63,-43.10 PASS Band7 5MHz QPSK 20775 1RB#0 -47.82,-39.33,-38.72,-23.01 PASS Band7 5MHz QPSK 20775 1RB#24 -48.72,-36.50,-36.34,-42.18 PASS Band7 5MHz QPSK 20775 25RB#0 -43.41,-35.88,-32.76,-30.75 PASS Band7 5MHz QPSK 21425 1RB#0 -42.98,-36.15,-48.40,-48.88 PASS Band7 5MHz QPSK 21425 1RB#24 -25.83,-39.14,-47.66,-47.73 PASS Band7 5MHz QPSK 21425 25RB#0 -32.55,-35.38,-44.09,-45.34 PASS Report No.: JYTSZ-R12-2600631 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607086 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 63 of 130 Band7 5MHz 16QAM 20775 1RB#0 -47.88,-39.86,-39.11,-24.51 PASS Band7 5MHz 16QAM 20775 1RB#24 -48.82,-34.76,-34.88,-42.58 PASS Band7 5MHz 16QAM 20775 25RB#0 -42.60,-35.16,-28.71,-29.56 PASS Band7 5MHz 16QAM 21425 1RB#0 -44.00,-34.39,-48.54,-48.97 PASS Band7 5MHz 16QAM 21425 1RB#24 -25.05,-39.03,-48.09,-47.62 PASS Band7 5MHz 16QAM 21425 25RB#0 -32.49,-33.45,-42.09,-44.74 PASS Band7 20MHz QPSK 20850 1RB#0 -34.14,-33.83,-36.96,-34.10 PASS Band7 20MHz QPSK 20850 1RB#99 -28.48,-31.42,-41.12,-51.84 PASS Band7 20MHz QPSK 20850 100RB#…

Text truncated - open the document above for the full version.

JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607086 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 1 of 2 GSM, WCDMA, LTE test setup photos Radiated Spurious Emission Below 1GHz Above 1GHz JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607086 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 2 Conducted method ------End------

JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R14-2600053 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607087 Page 1 of 9 EUT Photos Model:The Leader Tab9 4G JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R14-2600053 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607087 Page 2 of 9 Model:Star9 4G JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R14-2600053 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607087 Page 3 of 9 EUT Antenna Locations The Leader Tab9 4G JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R14-2600053 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607087 Page 4 of 9 JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R14-2600053 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607087 Page 5 of 9 Star9 4G JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R14-2600053 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607087 Page 6 of 9 JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R14-2600053 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607087 Page 7 of 9 SAR Test Setup Photos The Leader Tab9 4G Head Right Cheek Right Tilted Left Cheek Left Tilted Body Back side(0mm MAIN ANT) Back side (0mm WiFi ANT) JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R14-2600053 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607087 Page 8 of 9 Left side(0mm) Right side(0mm) Bottom side(0mm) JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R14-2600053 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2607087 Page 9 of 9 Star9 4G Head Right Cheek Right Tilted Left Cheek Left Tilted Body Back side(0mm) Right side(0mm)

JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R12-2600632 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in above the application standard version. Test results reported herein relate only to the item(s) tested. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Cover Page RF Test Report (WCDMA) Report No.: JYTSZ-R12-2600632 Applicant: XINCHUANGXIN INTERNATIONAL CO. LTD Address of Applicant: ROOM 605 6/F, FA YUEN COMMERCIAL BUILDING, 75-77 FA YUEN STREET MONGKOK KL Equipment Under Test (EUT) Product Name: Tablet Model No.: The Leader Tab9 4G, Star9 4G Trade Mark: CORN FCC ID: 2ASWWTAB4G Applicable Standards: FCC CFR Title 47 Part 2, 22H, 24E, 27L Date of Sample Receipt: 27 Jul., 2026 Date of Test: 28 Jul., to 17 Aug., 2026 Date of Report Issued: 31 Aug., 2026 Test Result: PASS Tested by: Date: 31 Aug., 2026 Project Engineer Reviewed by: Date: 31 Aug., 2026 Senior Engineer Approved by: Date: 31 Aug., 2026 Manager Report No.: JYTSZ-R12-2600632 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-152-C Project No.: JYTSZR2607086 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 19 Version 1 Version No. Date Description 00 31 Aug., 2026 Original Report No.: JYTSZ-R12-2600632 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-152-C Project No.: JYTSZR2607086 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 3 of 19 Contents 2 Page Cover Page ............................................................................................................................................................. 1 Version ........................................................................................................................................................... 2 1 Contents ......................................................................................................................................................... 3 2 General Information ...................................................................................................................................... 4 3 Client Information ................................................................................................................................... 4 3.1 General Description of E.U.T. ................................................................................................................ 4 3.2 Disclaimer ............................................................................................................................................... 4 3.3 Test Mode and Environment .................................................................................................................. 5 3.4 Description of Test Auxiliary Equipment ................................................................................................ 5 3.5 Measurement Uncertainty ...................................................................................................................... 5 3.6 Additions to, Deviations, or Exclusions from the Method ....................................................................... 5 3.7 Laboratory Facility .................................................................................................................................. 6 3.8 Laboratory Location ................................................................................................................................ 6 3.9 Test Instruments List .............................................................................................................................. 7 3.10 Measurement Setup and Procedure ........................................................................................................... 9 4 Test Channel .......................................................................................................................................... 9 4.1 Test Setup ............................................................................................................................................ 10 4.2 Test Procedure ..................................................................................................................................... 11 4.3 Test Results ................................................................................................................................................. 12 5 Summary .............................................................................................................................................. 12 5.1 Clause and Data Summary .............................................................................................................. 12 5.1.1 Test Limit .......................................................................................................................................... 13 5.1.2 Field Strength of Spurious Radiation Measurement ............................................................................ 14 5.2 Report No.: JYTSZ-R12-2600632 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-152-C Project No.: JYTSZR2607086 No.101, Building 8, Innovation Wisdom Port, No.155…

Text truncated - open the document above for the full version.

JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R12-2600631 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in above the application standard version. Test results reported herein relate only to the item(s) tested. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Cover Page RF Test Report (LTE) Report No.: JYTSZ-R12-2600631 Applicant: XINCHUANGXIN INTERNATIONAL CO. LTD Address of Applicant: ROOM 605 6/F, FA YUEN COMMERCIAL BUILDING, 75-77 FA YUEN STREET MONGKOK KL Equipment Under Test (EUT) Product Name: Tablet Model No.: The Leader Tab9 4G, Star9 4G Trade Mark: CORN FCC ID: 2ASWWTAB4G Applicable Standards: FCC CFR Title 47 Part 2, 22H, 24E, 27L & H & M Date of Sample Receipt: 27 Jul., 2026 Date of Test: 28 Jul., to 17 Aug., 2026 Date of Report Issued: 31 Aug., 2026 Test Result: PASS Tested by: Date: 31 Aug., 2026 Project Engineer Reviewed by: Date: 31 Aug., 2026 Senior Engineer Approved by: Date: 31 Aug., 2026 Manager Report No.: JYTSZ-R12-2600631 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-151-C Project No.: JYTSZR2607086 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 26 Version 1 Version No. Date Description 00 31 Aug., 2026 Original Report No.: JYTSZ-R12-2600631 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-151-C Project No.: JYTSZR2607086 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 3 of 26 Contents 2 Page Cover Page ............................................................................................................................................................. 1 Version ........................................................................................................................................................... 2 1 Contents ......................................................................................................................................................... 3 2 General Information ...................................................................................................................................... 4 3 Client Information ................................................................................................................................... 4 3.1 General Description of E.U.T. ................................................................................................................ 4 3.2 Disclaimer ............................................................................................................................................... 4 3.3 Test Mode and Environment .................................................................................................................. 5 3.4 Description of Test Auxiliary Equipment ................................................................................................ 5 3.5 Measurement Uncertainty ...................................................................................................................... 5 3.6 Additions to, Deviations, or Exclusions from the Method ....................................................................... 5 3.7 Laboratory Facility .................................................................................................................................. 6 3.8 Laboratory Location ................................................................................................................................ 6 3.9 Test Instruments List .............................................................................................................................. 7 3.10 Measurement Setup and Procedure ........................................................................................................... 9 4 Test Channel .......................................................................................................................................... 9 4.1 Test Setup ............................................................................................................................................ 11 4.2 Test Procedure ..................................................................................................................................... 12 4.3 Test Results ................................................................................................................................................. 13 5 Summary .............................................................................................................................................. 13 5.1 Clause and Data Summary .............................................................................................................. 13 5.1.1 Test Limit .......................................................................................................................................... 14 5.1.2 Field Strength of Spurious Radiation Measurement ............................................................................ 15 5.2 Report No.: JYTSZ-R12-2600631 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-151-C Project No.: JYTSZR2607086 No.101, Building 8, Innovation Wisdom Port, …

Text truncated - open the document above for the full version.

JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R12-2600630 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in above the application standard version. Test results reported herein relate only to the item(s) tested. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Cover Page RF Test Report (GSM) Report No.: JYTSZ-R12-2600630 Applicant: XINCHUANGXIN INTERNATIONAL CO. LTD Address of Applicant: ROOM 605 6/F, FA YUEN COMMERCIAL BUILDING, 75-77 FA YUEN STREET MONGKOK KL Equipment Under Test (EUT) Product Name: Tablet Model No.: The Leader Tab9 4G, Star9 4G Trade Mark: CORN FCC ID: 2ASWWTAB4G Applicable Standards: FCC CFR Title 47 Part 2, 22H, 24E Date of Sample Receipt: 27 Jul., 2026 Date of Test: 28 Jul., to 17 Aug., 2026 Date of Report Issued: 31 Aug., 2026 Test Result: PASS Tested by: Date: 31 Aug., 2026 Project Engineer Reviewed by: Date: 31 Aug., 2026 Senior Engineer Approved by: Date: 31 Aug., 2026 Manager Report No.: JYTSZ-R12-2600630 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-150-C Project No.: JYTSZR2607086 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 17 Version 1 Version No. Date Description 00 31 Aug., 2026 Original Report No.: JYTSZ-R12-2600630 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-150-C Project No.: JYTSZR2607086 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 3 of 17 Contents 2 Page Cover Page ............................................................................................................................................................. 1 Version ........................................................................................................................................................... 2 1 Contents ......................................................................................................................................................... 3 2 General Information ...................................................................................................................................... 4 3 Client Information ................................................................................................................................... 4 3.1 General Description of E.U.T. ................................................................................................................ 4 3.2 Disclaimer ............................................................................................................................................... 4 3.3 Test Mode and Environment .................................................................................................................. 5 3.4 Description of Test Auxiliary Equipment ................................................................................................ 5 3.5 Measurement Uncertainty ...................................................................................................................... 5 3.6 Additions to, Deviations, or Exclusions from the Method ....................................................................... 5 3.7 Laboratory Facility .................................................................................................................................. 6 3.8 Laboratory Location ................................................................................................................................ 6 3.9 Test Instruments List .............................................................................................................................. 7 3.10 Measurement Setup and Procedure ........................................…

Text truncated - open the document above for the full version.