2ASWY19TFTTLD1GPS Tracker

TOPFLYtech TLD1-DA(E) OBDII Vehicle GPS Tracker User Manual Revision 1.5 Shenzhen TOPFLYtech Co., Limited. All Rights Reserved 2 Thanks for your purchasing of the high-quality GPS tracker from TOPFLYtech. Please read this user manual carefully before installation and operation. Information in this manual is the property of TOPFLYtech. Changes to the specifications and features in this manual may be made by TOPFLYtech without prior notice. No part of this manual could be reproduced, copied, translated, transmitted, or published in any form or by any means without TOPFLYtech's prior written permission. The tracker is using GNSS & LTE technologies and could collect device coordinates then transfer them via LTE network to the server. It provides customer with cost-effective, efficient and safety management. It has been widely used in commercial transportation, company vehicle fleet management, intelligent transportation, logistics, car rental, engineering machinery, marine transportation and other segments. Shenzhen TOPFLYtech Co., Limited. All Rights Reserved 3 Contents 1. QUICK REFERENCE .............................................................................................................................. 5 2. PRODUCT SPECIFICATIONS .............................................................................................................. 5 3. LED INDICATOR ................................................................................................................................... 6 3.1 NETWORK (RED) ............................................................................................................................................. 6 3.2 GNSS (BLUE) .................................................................................................................................................. 6 3.3 DIAGNOSTIC (ORANGE) ................................................................................................................................. 6 4. INSTALLATION GUIDE ....................................................................................................................... 7 4.1 SIM CARD PRE-INSTALLATION NOTE .......................................................................................................... 7 4.2 SIM CARD INSTALLATION .............................................................................................................................. 7 4.3 INSTALLATION ................................................................................................................................................. 7 4.4 IGNITION DETECTION AND OBDII DATA READING ..................................................................................... 7 5. TRACKER CONFIGURATION ............................................................................................................. 7 6. TRACKER OPERATION ........................................................................................................................ 7 6.1 POWER ON AND OFF ...................................................................................................................................... 7 6.2 LOCATION SEARCH ......................................................................................................................................... 7 7. QUICK TROUBLE SHOOTING ............................................................................................................ 7 7.1 UNABLE TO CONNECT TO THE TRACKING PLATFORM ................................................................................. 7 7.2 TRACKER SHOWS OFFLINE ............................................................................................................................. 8 7.3 UNABLE TO LOCATE ........................................................................................................................................ 8 7.4 LOCATION DRIFT............................................................................................................................................. 8 7.5 NO COMMAND REPLY ................................................................................................................................... 8 8. WARRANTY AND STOCK .................................................................................................................. 8 9. FREQUENTLY USED OPERATION COMMANDS (SMS) .............................................................. 8 9.1 APN SETTING ................................................................................................................................................. 9 9.2 SERVER SETTING ........................................................................................................................................... 10 9.3 UPLOAD INTERVAL SETTING........................................................................................................................ 10 9.4 HEARTBEAT SETTING.................................................................................................................................... 10 9.5 GMT SETTING .............................................................................................................................................. 11 9.6 PIN SETTING ................................................................................................................................................ 11 9.7 MANAGER SETTING ..................................................................................................................................... 11 9.8 MANAGER DELETE ....................................................................................................................................... 11 9.9 MANAGER LIST ............................................................................................................................................. 12 9.10 ANTITHEFT SETTING ...............................................…

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 <2020-01-21> TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2ASWY19TFTTLD1 TLD1-DA、TLD1-A For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, (Signed) Name: FEI CHENG Company: SHENZHEN TOPFLYtech CO., LIMITED Address: Rm409 Scientific Research Building Tsinghua Hi-tech Park Hi-tech Industrial Nanshan District, Shenzhen, China Phone: +86-755-26060058 Fax:+86-755-26060050 E-Mail: [email protected]

SHENZHEN TOPFLYtech CO., LIMITED Rm409 Scientific Research Building Tsinghua Hi-tech Park Hi-tech Industrial Nanshan District, Shenzhen, China Labelling Location Declaration Letter Date: Jan. 21, 2020 FCC ID: 2ASWY19TFTTLD1 Model: TLD1-DA、TLD1-A Following the KDB 784748 D01General labeling and Notification, the information related to Labeling implementation for the GPS Tracker, FCC ID: 2ASWY19TFTTLD1, Information On Label On Product Packaging In Online User Guide In Printed User Guide FCC ID Number (Contains FCC ID: 2ASWY19TFTTLD1) Y Y 15.19 Statement “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation” Y Y Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Y Y Product Packaging Label is shown below: FCC ID: 2ASWY19TFTTLD1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, The product is packaged individually. SHENZHEN TOPFLYtech CO., LIMITED Rm409 Scientific Research Building Tsinghua Hi-tech Park Hi-tech Industrial Nanshan District, Shenzhen, China Sincerely Signature Name: FEI CHENG Title: General Manager Tel: +86-755-26060058 Fax: +86-755-26060050 E-Mail: [email protected]

Declaration of Authorization We Name: SHENZHEN TOPFLYtech CO., LIMITED Address: Rm409 Scientific Research Building Tsinghua Hi-tech Park Hi-tech Industrial Nanshan District, City: Shenzhen State: N/A Country: China Declare that: Name Representative of agent: Ms. Riley Wei Agent Company name: BTL Inc. Address: No. 29, Jintang Road, Tangzhen Industry Park,Pudong New Area, City: Shanghai Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s): Product description: GPS Tracker Type designation: TLD1-DA、TLD1-A Trademark: TOPFLYtech FCC ID: 2ASWY19TFTTLD1 on our behalf. Date:2020/01/21 City:Shenzhen Name: FEI CHENG Function: General Manager Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

SHENZHEN TOPFLYTECH CO., LIMITED Rm409 Scientific Research Building Tsinghua Hi-tech Park Hi-tech Industrial Nanshan District, Shenzhen, China Date: Jan. 21, 2020 FCC ID: 2ASWY19TFTTLD1 Model Number: TLD1-DA、TLD1-A To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, SHENZHEN TOPFLYTECH CO., LIMITED, hereby declare that our product (GPS Tracker) Model Number: TLD1-DA、TLD1-A will disable Bluetooth EDR function by software and only open Bluetooth Lower Energy function (Bluetooth V4.0) although Bluetooth modular MT2503 support both Bluetooth Lower Energy (Bluetooth V4.0) and Bluetooth EDR, due to marketing purposes. End-user will only use Bluetooth Lower Energy function (Bluetooth V4.0) in USA market. Please contact me if you have any question. Sincerely, Signed: Name/Title: FEI CHENG / General Manager

Model Declaration Letter We, the undersigning company Company Name: SHENZHEN TOPFLYTECH CO., LIMITED Address: Rm409 Scientific Research Building Tsinghua Hi-tech Park Hi-tech Industrial Nanshan District, Shenzhen, China Hereby confirm that the following products: Product description: GPS Tracker Type designation: TLD1-DA、TLD1-A Trademark: TOPFLYtech That All versions of the Model TLD1-DA and TLD1-A ; are electrically equal except the following difference: 1. TLD1-DA support OBDII diagnostic feature; 2. TLD1-A doesn’t support OBDII diagnostic feature, so the PCB doesn’t have the MCU and the components. Date: 20120-01-21 Name: FEI CHENG Telephone: +86-755-26060058 E-mail: [email protected] Signature:

Project No.: 1903H004 Page 1 of 10 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 1903H004 Page 2 of 10 Project No.: 1903H004 Page 3 of 10

Label Label location

Project No.: 1903H004 Page 4 of 10 Ant for BT/LE Project No.: 1903H004 Page 5 of 10 Project No.: 1903H004 Page 6 of 10 Project No.: 1903H004 Page 7 of 10 Project No.: 1903H004 Page 8 of 10 Project No.: 1903H004 Page 9 of 10 Project No.: 1903H004 Page 10 of 10

FCC RF EXPOSURE EVALUATION REPORT FCC ID: 2ASWY19TFTTLD1 Project No. : 1903H004 Equipment : GPS Tracker Model : TLD1-DA、TLD1-A Applicant : SHENZHEN TOPFLYTECH CO., LIMITED Address : Rm409 Scientific Research Building Tsinghua Hi-tech Park Hi-tech Industrial Nanshan District, Shenzhen, China Exposure category : General population/uncontrolled environment EUT Type: : Production Unit (Engineer Sample) Device Type : Mobile Device 1. Evaluation Method Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. In accordance with KDB447498D01 for Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modeled or measured field strengths or power density, is ≤ 1.0. The MPE ratio of each antenna is determined at the minimum test separation distance required by the operating configurations and exposure conditions of the host device, according to the ratio of field strengths or power density to MPE limit, at the test frequency. Either the maximum peak or spatially averaged results from measurements or numerical simulations may be used to determine the MPE ratios. Spatial averaging does not apply when MPE is estimated using simple calculations based on far-field plane-wave equivalent conditions. The antenna installation and operating requirements for the host device must meet the minimum test separation distances required by all antennas, in both standalone and simultaneous transmission operations, to satisfy compliance. 2. Limits for General Population/Uncontrolled Exposure 3. Refer Evaluation Method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1093: Radiofrequency radiation exposure evaluation: portable devices 4. Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 5. Conducted Power Results 5.1 Test Setup 5.2 Test Equipment Item Kind of Equipment Manufacturer Type No. Serial No. Calibrated until 1 Peak Power Analyzer Keysight 8990B MY51000507 Mar. 29, 2020 2 Pulse Power Sensor Keysight N1923A MY58310003 Mar. 29, 2020 Remark: all calibration period of equipment list is one year. 5.3 Test Procedure a. The EUT was directly connected to the power meter and antenna output port as show in the block diagram Test Setup. b. Setup EUT work at duty cycle more than 98%; c. Read power sensor values in RMS detector; 5.4 Test Results and Manufacturing Tolerance Mode Maximum Average power declared by Manufacturer Antenna 0 GFSK – BT LE 3.00 6. Antenna Information Antenna Manufacturer Model Name Antenna Type Connector Maximum Peak Gain (dBi) Antenna 0 N/A N/A Internal N/A 0.5 7. Evaluation Results 7.1 Standalone Antenna 0 Mode Output power Antenna Gain (dBi) Antenna Gain (linear) Duty Cycle MPE (W/m 2 ) MPE Limits (W/m 2 ) (dBm) (W) GFSK – BT LE 3.00 0.0020 0.5 1.1220 100% 0.0045 1.0000 Remark: 1. Maximum power including tune-up tolerance; 2. EIRP including tune-up tolerance; 3. MPE use distance is 20cm from manufacturer declaration of user manual. 8. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. End of Test Report.

Report No.: BTL-FCCP-1-1903H004 Page 1 of 56 FCC Radio Test Report FCC ID: 2ASWY19TFTTLD1 This report concerns: Original Grant Project No. : 1903H004 Equipment : GPS Tracker Brand Name : TOPFLYtech Test Model : TLD1-DA Series Model : TLD1-A Applicant : SHENZHEN TOPFLYTECH CO., LIMITED Address : Rm409 Scientific Research Building Tsinghua Hi-tech Park Hi-tech Industrial Nanshan District, Shenzhen, China Manufacturer : SHENZHEN TOPFLYTECH CO., LIMITED Address : Rm409 Scientific Research Building Tsinghua Hi-tech Park Hi-tech Industrial Nanshan District, Shenzhen, China Factory : SHENZHEN TOPFLYTECH CO., LIMITED Address : Rm409 Scientific Research Building Tsinghua Hi-tech Park Hi-tech Industrial Nanshan District, Shenzhen, China Date of Receipt : May. 13, 2019 Date of Test : May. 13, 2019~ Mar. 03, 2020 Issued Date : Apr. 08, 2020 Report Version : R03 Test Sample : Engineering Sample No.: SH1904292 Standard(s) : FCC Part15, Subpart C (15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance V05r02 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Iscaa Min Approved by : Krain Wu Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.: BTL-FCCP-1-1903H004 Page 2 of 56 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-1903H004 Page 3 of 56 Table of Contents Page REPORT ISSUED HISTORY 5 1 . SUMMARY OF TEST RESULTS 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 1.3 TEST ENVIRONMENT CONDITIONS 7 2 . GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF EUT 8 2.2 DESCRIPTION OF TEST MODES 10 2.3 PARAMETERS OF TEST SOFTWARE 10 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 2.5 SUPPORT UNITS 12 3 . AC POWER LINE CONDUCTED EMISSIONS TEST 13 3.1 LIMIT 13 3.2 TEST PROCEDURE 13 3.3 DEVIATION FROM TEST STANDARD 13 3.4 TEST SETUP 14 3.5 EUT OPERATING CONDITIONS 14 3.6 TEST RESULTS 14 4 . RADIATED EMISSION TEST 15 4.1 LIMIT 15 4.2 TEST PROCEDURE 16 4.3 DEVIATION FROM TEST STANDARD 16 4.4 TEST SETUP 17 4.5 EUT OPERATING CONDITIONS 18 4.6 TEST RESULT - 9 KHZ TO 30 MHZ 18 4.7 TEST RESULT - 30 MHZ TO 1000 MHZ 18 4.8 TEST RESULT - ABOVE 1000 MHZ 18 5 . BANDWIDTH TEST 19 5.1 LIMIT 19 5.2 TEST PROCEDURE 19 5.3 DEVIATION FROM STANDARD 19 5.4 TEST SETUP 19 5.5 EUT OPERATION CONDITIONS 19 5.6 TEST RESULTS 19 Report No.: BTL-FCCP-1-1903H004 Page 4 of 56 Table of Contents Page 6 . MAXIMUM OUTPUT POWER 20 6.1 LIMIT 20 6.2 TEST PROCEDURE 20 6.3 DEVIATION FROM STANDARD 20 6.4 TEST SETUP 20 6.5 EUT OPERATION CONDITIONS 20 6.6 TEST RESULTS 20 7 . CONDUCTED SPURIOUS EMISSION 21 7.1 LIMIT 21 7.2 TEST PROCEDURE 21 7.3 DEVIATION FROM STANDARD 21 7.4 TEST SETUP 21 7.5 EUT OPERATION CONDITIONS 21 7.6 TEST RESULTS 21 8 . POWER SPECTRAL DENSITY TEST 22 8.1 LIMIT 22 8.2 TEST PROCEDURE 22 8.3 DEVIATION FROM STANDARD 22 8.4 TEST SETUP 22 8.5 EUT OPERATION CONDITIONS 22 8.6 TEST RESULTS 22 9 . MEASUREMENT INSTRUMENTS LIST 23 10 . EUT TEST PHOTO 25 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 27 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 28 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 29 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 34 APPENDIX E - BANDWIDTH 49 APPENDIX F - MAXIMUM OUTPUT POWER 51 APPENDIX G - CONDUCTED SPURIOUS EMISSION 53 APPENDIX H - POWER SPECTRAL DENSITY 55 Report No.: BTL-FCCP-1-1903H004 Page 5 of 56 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Feb. 24, 2020 R01 Add the co-located radiated spurious emission data in page 31-32 and 46-47. Mar. 04, 2020 R02 Update the description of Mode 4 in page10. Mar. 26, 2020 R03 Update the test mode description in page10. Apr. 08, 2020 Report No.: BTL-FCCP-1-1903H004 Page 6 of 56 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part15, Subpart C (15.247) Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Conducted Emissions APPENDIX A N/A ------ 15.247(d) 15.205(a) 15.209(a) Radiated Emissions APPE…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-1903H004 Page 24 of 51 10. EUT TEST PHOTO Radiated Emissions Test Photos 30 MHz to 1000 MHz Report No.: BTL-FCCP-1-1903H004 Page 25 of 51 Radiated Emissions Test Photos Above 1 GHz