2ASYP-VR8Wireless remote

103485A4 WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Fax: 1-503-722-3005 VR EVO 103485A4 41 to 47 Nm (30-35 ft. lbs.) BEFESTIGUNG •Immer die Seilführung so positionieren, dass der Warnhinweis deutlich sichtbar nach oben zeigt. •Immer Befestigungselemente der Festigkeitsklasse 8.8 (Grade 5) verwenden. •Befestigungsschrauben niemals schweißen. •Niemals zu lange Schrauben verwenden. •Immer auf verlangte Schraubenlängen achten, damit das Gewinde richtig fassen kann. •Immer erst die Windeninstallation und Hakenbefestigung abschließen, bevor die Verkabelung installiert wird. WARNUNG Element MengeBeschreibung A, B, C4M10 D2M10 x 30 E2M10 x 45 VR EVO BEVOR Sie das Produkt installieren, lesen Sie bitte die gesamte dazugehörige Literatur. https://www.warn.com/manuals/index.jsp Stärke der Platte Schraubenlänge 7 mm (1/4”)32 mm (1 1/4”) 10 mm (3/8”)40 mm (1 5/8”) 13 mm (1/2”)40 mm (1 5/8”) E B A C D Element MengeBeschreibung A, B, C4M10 D2M10 x 30 E2M12 x 35 F, G, H2M12 A C D B H E G F G F Mall för standardhål Wireless remote 103485A4 41 to 47 Nm (30-35 ft. lbs.) Element MengeBeschreibung A, B, C4M10 D2M10 x 30 E2M10 x 40 A D C H E G F E B A C D G F Element MengeBeschreibung A, B, C4M10 D2M10 x 30 E2M12 x 35 F, G, H2M12 B x2x4 103485A4 VERKABELUNG • Beim Anschließen der Batterie immer Schmuck ablegen und Schutzbrille tragen. • Elektrokabel niemals über scharfe Kanten führen. • Elektrokabel niemals in die Nähe von Teilen verlegen, die heiß werden. • Niemals Elektrokabel über Batterieanschlüsse verlegen. • Elektrokabel niemals durch bewegliche Teile oder in der Nähe von beweglichen Teilen verlegen. • Stets alle off enliegenden elektrischen Kabel- und Anschlussstellen isolieren und schützen. • Immer die mitgelieferten Anschlusskappen auf die Kabel und Anschlüsse setzen. WARNUNG Stromkabel (rot) Erdungskabel (schwarz) Erdungskabel (schwarz) F2 A F1 103485A4 FERNBEDIENUNG • Niemals die Kupplung einrücken oder ausrücken, wenn die Winde unter Last ist, das Seil der Winde gespannt ist oder sich die Trommel bewegt. • Lassen Sie die Fernbedienung der Winde niemals dort liegen, wo sie während des Freilaufens, der Takelung oder wenn die Winde nicht benutzt wird, aktiviert werden kann. • Lassen Sie die Fernbedienung der drahtlosen Winde niemals eingeschaltet, wenn Sie die Winde installieren, freispulen, rüsten oder warten, oder wenn die Winde nicht verwendet wird. WARNUNG Wireless-Aktivierungstaste: Gedrückt halten, um den Wireless-Modus zu aktivieren. Winden-Ausschaltknopf: Drücken Sie, um den Ausschaltvorgang der Winde zu steuern. Winden-Einschaltknopf: Drücken Sie, um den Einschaltvorgang der Winde zu steuern. Wireless-Aktivierungslicht: Blaues Licht leuchtet, wenn der drahtlose Modus aktiviert ist. Kabelgebundenes Aktivierungslicht: Rotes Licht leuchtet, wenn der Kabelmodus aktiviert ist. Verdrahtete Funktion 1. = 103485A4 Wireless-Funktion 1. Windenfunktion 1. 3. = 2. AAA 2 103485A4 41 to 47 Nm (30-35 ft. lbs.) MONTERING • Placera alltid linledaren med varningen tydligt synbar upptill. • Använd alltid klass 8.8 metrisk (grad 5) eller bättre monteringsbeslag. • Svetsa aldrig monteringsbultar. • Använd aldrig bultar som är för långa. • Bekräfta alltid bultlängden som krävs för att säkerställa korrekt gängingrepp. • Slutför alltid installationen av vinschen och krokfästet innan du ansluter ledningarna. VARNING ArtikelAntal Beskrivning A, B, C4M10 D2M10 x 30 E2M10 x 45 VR EVO Läs all produktdokumentation INNAN du installerar produkten. https://www.warn.com/manuals/index.jsp Plattans tjocklekBultens längd 7 mm (1/4”)32 mm (1 1/4”) 10 mm (3/8”)40 mm (1 5/8”) 13 mm (1/2”)40 mm (1 5/8”) E B A C D ArtikelAntal Beskrivning A, B, C4M10 D2M10 x 30 E2M12 x 35 F, G, H2M12 A C D B H E G F G F Mall för standardhål 103485A4 41 to 47 Nm (30-35 ft. lbs.) ArtikelAntal Beskrivning A, B, C4M10 D2M10 x 30 E2M10 x 40 A D C H E G F E B A C D G F ArtikelAntal Beskrivning A, B, C4M10 D2M10 x 30 E2M12 x 35 F, G, H2M12 B x2x4 103485A4 KABLAGE • Ta alltid av smycken och ta på dig skyddsglasögon när du ska ansluta batteriet. • Dra aldrig elkablar över vassa kanter. • Dra aldrig elkablar i närheten av delar som blir heta. • Dra aldrig elektriska ledningar över batteripoler. • Dra aldrig elkablar genom eller i närheten av rörliga delar. • Isolera och skydda alltid alla lösa ledningar och elektriska anslutningar. • Placera alltid de medföljande terminalskorna på kablarna och terminalerna. VARNING Strömsladd (röd) Jordsladd (svart) Jordsladd (svart) F2 A F1 103485A4 FJÄRRKONTROLL • Koppla aldrig in eller koppla ur kopplingen om vinschen är under belastning, vinsch repet är i spänning eller trumman rör sig. • Lämna aldrig vinsch fj ärrkontroll, där den kan aktiveras vid fri spolning, riggning eller när vinschen inte används. • Låt aldrig fj ärrkontrollen för trådlös vinsch vara påslagen när du installerar, freespooling, rigger eller servar, eller när vinschen inte används. VARNING Trådlös aktiveringsknapp: Tryck och håll ned för att aktivera trådlöst läge. Winch Power-Out-knapp: Tryck för att kontrollera winchens utmatningsfunktion. Winch Power-in-knapp: Tryck för att styra inslagets driftstart. Trådlöst aktiveringsljus: Blå tänds när trådlöst läge är aktiverat. Wired Activation Light: Rödt ljus när det trådbundna läget är aktiverat. Wired Funktion 1. = 103485A4 Trådlös funktion 1. Winching Funktion 1. 3. = 2. AAA 2 103485A4 41 to 47 Nm (30-35 ft. lbs.) MONTAGEM • Sempre posicione o cabo guia com a etiqueta ADVERTÊNCIA na parte de cima. • Sempre use equipamento classe métrica 8.8 (grau 5) ou superior. • Nunca solde parafusos de montagem. • Nunca use parafusos muito longos. • Sempre confi ra o comprimento do parafuso exigido, para garantir o engate adequado da rosca. • Sempre conclua a instalação do guincho e o engate do gancho antes da instalação da fi ação. ADVERTÊNCIA ItemQty Descrição A, B…

Text truncated - open the document above for the full version.

103485A4 41 to 47 Nm (30-35 ft. lbs.) ItemAantalBeschrijving A, B, C4M10 D2M10 x 30 E2M10 x 45 VR EVO PlaatdikteBoutlengte 7 mm (1/4”)32 mm (1 1/4”) 10 mm (3/8”)40 mm (1 5/8”) 13 mm (1/2”)40 mm (1 5/8”) E B A C D ItemAantalBeschrijving A, B, C4M10 D2M10 x 30 E2M12 x 35 F, G, H2M12 A C D B H E G F G F Standaard gatenpatroon MONTAGE • Plaats altijd een goed zichtbare waarschuwing op de kabelgeleider. • Gebruik altijd montagemiddelen van kwaliteitsklasse 8.8 metrisch (imperiaal: SAE grade 5) of hoger. • Las nooit montagebouten. • Gebruik nooit bouten die te lang zijn. • Verifi eer de benodigde boutlengte om ervoor te zorgen dat de schroefdraad voldoende aangrijpt. • Voltooi altijd de lierinstallatie en haakbevestiging voordat u de bedrading installeert. WAARSCHUWING Lees altijd alle productdocumentatie VOORDAT u het product installeert. https://www.warn.com/manuals/index.jsp 103485A4 41 to 47 Nm (30-35 ft. lbs.) ItemAantalBeschrijving A, B, C4M10 D2M10 x 30 E2M10 x 40 A D C H E G F E B A C D G F ItemAantalBeschrijving A, B, C4M10 D2M10 x 30 E2M12 x 35 F, G, H2M12 B x2x4 103485A4 BEDRADING • Verwijder altijd alle sieraden en draag altijd een veiligheidsbril als u de accu aansluit. • Leid elektriciteitskabels nooit over scherpe randen. • Leg elektriciteitskabels nooit in de buurt van onderdelen die heet worden. • Leid elektriciteitskabels nooit over accupolen. • Leid elektriciteitskabels niet door of nabij bewegende onderdelen. • Isoleer en bescherm altijd alle blootliggende bedrading en elektrische aansluitingen. • Plaats altijd de meegeleverde klemhulzen op de draden en de aansluitingen. WAARSCHUWING Voedingskabel (rood) Massakabel (zwart) Massakabel (zwart) F2 A F1 103485A4 AFSTANDSBEDIENING • Schakel de koppeling nooit in of uit als de lier onder belasting staat, het lierkabel in spanning staat of de trommel in beweging is. • Verlaat de lierafstandsbediening nooit waar deze kan worden geactiveerd tijdens het vrij ronddraaien, optuigen of wanneer de lier niet wordt gebruikt. • Laat de afstandsbediening van de draadloze lier nooit ingeschakeld tijdens het installeren, freespooling, tuigage of onderhoud van een lier, of wanneer de lier niet wordt gebruikt. WAARSCHUWING Knop voor draadloze activering: Houd ingedrukt om de draadloze modus te activeren. Lier Power-Out-knop: Druk op om de power-out-bediening van de lier te regelen. Winch Power-in-knop: Indrukken om de power-in-bediening van de lier te regelen. Draadloos activeringslicht: Blauw licht aan wanneer de draadloze modus is geactiveerd. Wired Activation Light: Rood lampje aan wanneer bedrade modus is geactiveerd. Bedrade functie 1. = 103485A4 Draadloze functie 1. Winching-functie 1. 3. = 2. AAA 2 103485A4 41 - 47 Nm (30-35 ft. lbs.) 安装 · 始终适当定位导缆器，确保警告在顶部可见。 · 始终使用公制8.8级(5级)或更好的五金配件。 · 切勿焊接安装螺栓。 · 切勿使用过长的螺栓。 · 始终确认所需的螺栓长度，以确保正确的螺纹接合。 · 务必在安装布线前完成绞盘的安装和吊钩的连接。 警告 项目数量说明 A、B、C 4 M10 D2 M10 x 30 E2 M10 x 45 VR EVO 在安装产品之前，务必阅读所有产品资料。 https://www.warn.com/manuals/index.jsp 板厚度螺栓长度 7 mm (1/4”) 32 mm (1 1/4”) 10 mm (3/8”) 40 mm (1 5/8”) 13 mm (1/2”) 40 mm (1 5/8”) E B A C D 项目数量说明 A、B、C 4 M10 D2 M10 x 30 E2 M12 x 35 F、G、H 2 M12 A C D B H E G F G F 标准孔模式 103485A4 41 - 47 Nm (30-35 ft. lbs.) 项目数量说明 A、B、C 4 M10 D2 M10 x 30 E2 M10 x 40 A D C H E G F E B A C D G F 项目数量说明 A、B、C 4 M10 D2 M10 x 30 E2 M12 x 35 F、G、H 2 M12 B x2x4 103485A4 接线 • 连接电池时，务必摘掉首饰并戴上眼睛保护装置。 · 切勿将电缆穿过尖锐的边缘。 · 切勿在发热部位附近铺设电缆。 · 切勿在电池端子上布线。 · 切勿将电缆穿过或靠近活动部件。 · 务必对所有暴露的电线和电气接线端子进行绝缘和保护。 · 始终将所提供的端子柱环放在电缆和端子上。 警告 电源线 (183 cm (72”) 长，红色) 接地线 （黑色） 负极电缆 (183 cm (72”)长， 黑色) F2 A F1 103485A4 遥控 • 若绞盘处于负载状态，绞盘绳处于张力状态或滚筒处于运动状态，切勿接合或松开离合器。 · 切勿将绞盘遥控器放在它能够在自由卷线、传动或绞盘不使用时激活的地方。 · 切勿将无线绞盘遥控器放在它能够在安装、自由卷线、传动或维修绞盘或绞盘不使用时激活 的地方。 警告 绞盘电源输出按钮: 按下可控制绞盘的电源输出 操作。 绞盘电源输入按钮: 按下可控制绞盘的电源输入 操作。 无线启动指示灯: 当无线模式启动时，蓝灯点亮。 有线启动指示灯: 当有线模式启动时，红灯点亮。 有线功能 1. = 无线启动按钮: 按住可启动无线模式。 103485A4 无线功能 1. 绞盘功能 2. 1. 3. = AAA 2 FCC& ISDE Statement This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la partie 15 des règles de la FCC et aux normes RSS exemptées de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes :(1)cet appareil ne doit pas causer d’interférences nuisibles, et (2)cet appareil doit accepter toute interférence reçue, y compris les interferences pouvant entraîner un fonctionnement indés Changes or modifications to this unit not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure…

Text truncated - open the document above for the full version.

NINGBO LIANDA WINCH CO.,LTD Yushantou Village,Dongqiao Town Haishu Dist,Ningbo,China The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-3-22 To whom it may concern: We, NINGBO LIANDA WINCH CO.,LTD , hereby certify that the equipment for which authorization is sought (FCC ID: 2ASYP-VR8) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). Sincerely, Signature Annabelle Li Sales NINGBO LIANDA WINCH CO.,LTD 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V02

- NINGBO LIANDA WINCH CO.,LTD - The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 3/13/2023 U.S. Agent Designation NINGBO LIANDA WINCH CO.,LTD acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2ASYP-VR8） Name of U.S. agent: Tim Payne Company U.S. agent: FCC US Agent, LLC Physical U.S. address of agent: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent: 0033402884 Email address of U.S. agent: [email protected] Phone of U.S. agent: 708-571-3148 FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of NINGBO LIANDA WINCH CO.,LTD NINGBO LIANDA WINCH CO.,LTD accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). Sincerely, Signature Annabelle Sales NINGBO LIANDA WINCH CO.,LTD Signature Tim Payne Manager FCC US Agent, LLC 48_[model] US_Agent_2.911(d)(7)-U, V03

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-3-22> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2ASYP-VR8 VR EVO For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Annabelle Li/Sales Company: NINGBO LIANDA WINCH CO.,LTD Address: Yushantou Village,Dongqiao Town Haishu Dist,Ningbo,China Phone: 0574-88151208 Fax: 0574 88001969 E-Mail: [email protected]

NINGBO LIANDA WINCH CO.,LTD Yushantou Village,Dongqiao Town Haishu Dist,Ningbo,China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-3-22 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2ASYP-VR8 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Annabelle Li/Sales Company: NINGBO LIANDA WINCH CO.,LTD Address: Yushantou Village,Dongqiao Town Haishu Dist,Ningbo,China Phone: 0574-88151208 Fax: 0574 88001969 E-Mail: [email protected]

Page1of3FCCID:2ASYP-VR8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity ExternalPhotosoftheEUT Fig.1 Fig.2 Page2of3FCCID:2ASYP-VR8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.3 Fig.4 Page3of3FCCID:2ASYP-VR8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.5 Fig.6

Page1of1FCCID:2ASYP-VR8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity LABELANDLOCATION (Size:L5.0cmx2.5cm) LabelLocation Wirelessremote Model:VREVO FCCID:2ASYP-VR8

Page1of3FCCID:2ASYP-VR8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity InternalPhotosoftheEUT Fig.1 Fig.2 Page2of3FCCID:2ASYP-VR8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.3 Fig.4 ANT Page3of3FCCID:2ASYP-VR8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.5

Page1of27FCCID:2ASYP-VR8ReportNo.:LCSA022723120EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCCTESTREPORT For NINGBOLIANDAWINCHCO.,LTD Wirelessremote TestModel:VREVO Preparedfor:NINGBOLIANDAWINCHCO.,LTD Address:YushantouVillage,DongqiaoTownHaishuDist,Ningbo,China Preparedby:ShenzhenLCSComplianceTestingLaboratoryLtd. Address:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei, ShajingStreet,BaoanDistrict,Shenzhen,518000,China Tel:(+86)755-82591330 Fax:(+86)755-82591332 Web:www.LCS-cert.com Mail:[email protected] Dateofreceiptoftestsample:March02,2023 Numberoftestedsamples:A022723120-1,A022723120-2 Serialnumber:Prototype DateofTest:March02,2023~March13,2023 DateofReport:March13,2023 Page2of27FCCID:2ASYP-VR8ReportNo.:LCSA022723120EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCCTESTREPORT FCCCFR47PART15C(15.231) ReportReferenceNo. .................. :LCSA022723120EA DateofIssue .................................... :March13,2023 TestingLaboratoryName...........:ShenzhenLCSComplianceTestingLaboratoryLtd. Address.............................................: 101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei, ShajingStreet,BaoanDistrict,Shenzhen,518000,China TestingLocation/Procedure......... :FullapplicationofHarmonisedstandards■ PartialapplicationofHarmonisedstandards□ Otherstandardtestingmethod□ Applicant’sName..........................:NINGBOLIANDAWINCHCO.,LTD Address.............................................:YushantouVillage,DongqiaoTownHaishuDist,Ningbo,China TestSpecification Standard...........................................:FCCCFR47PART15SubpartC,ANSIC63.10-2013 TestReportFormNo...................:LCSEMC-1.0 TRFOriginator.................................:ShenzhenLCSComplianceTestingLaboratoryLtd. MasterTRF ...................................... :Dated2011-03 ShenzhenLCSComplianceTestingLaboratoryLtd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenLCSComplianceTestingLaboratoryLtd.isacknowledgedascopyrightownerandsourceof thematerial.ShenzhenLCSComplianceTestingLaboratoryLtd.takesnoresponsibilityforandwillnot assumeliabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialdueto itsplacementandcontext. TestItemDescription..................:Wirelessremote TradeMark.......................................:N/A TestModel.......................................:VREVO Ratings..............................................:DC4.5Vby3*AAABatteries Result................................................:Positive Compiledby:Supervisedby:Approvedby: LiHuan/AdministratorCaryLuo/TechniqueprincipalGavinLiang/Manager Page3of27FCCID:2ASYP-VR8ReportNo.:LCSA022723120EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCC--TESTREPORT EUT.........................................:Wirelessremote TestModel...........................:VREVO Applicant...............................:NINGBOLIANDAWINCHCO.,LTD Address..................................:YushantouVillage,DongqiaoTownHaishuDist,Ningbo,China Telephone...............................:/ Fax..........................................:/ Manufacturer.......................:NINGBOLIANDAWINCHCO.,LTD Address...................................:YushantouVillage,DongqiaoTownHaishuDist,Ningbo,China Telephone...............................:/ Fax..........................................:/ Factory....................... :NINGBOLIANDAWINCHCO.,LTD Address...................................:YushantouVillage,DongqiaoTownHaishuDist,Ningbo,China Telephone...............................:/ Fax..........................................:/ TestResultPositive Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetestlaboratory. TestReportNo.:LCSA022723120EA March13,2023 Dateofissue Page4of27FCCID:2ASYP-VR8ReportNo.:LCSA022723120EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity RevisionHistory ReportVersionIssueDateRevisionContentRevisedBy 000March13,2023InitialIssue-- Page5of27FCCID:2ASYP-VR8ReportNo.:LCSA022723120EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity TABLEOFCONTENTS 1.GENERALINFORMATION........................................................................................................................6 1.1.DESCRIPTIONOFDEVICE(EUT).............................................................................................................6 1.2.OBJECTIVE.............................................................................................................................................6 1.3.ENVIRONMENTALCONDITIONS................................................................................................................6 1.4.HOSTSYSTEMCONFIGURATIONLISTANDDETAILS.................................................................................6 1.5.EXTERNALI/OPORT............................................................................................................…

Text truncated - open the document above for the full version.

Page1of1FCCID:2ASYP-VR8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity TestSetupPhotosoftheEUT TestSetupPhoto(s)ofRadiatedEmissionsMeasurement Fig.1 Fig.2