2AT6N-20HBLAU-STREAM Hybrid

929 108TH AVE NE STE 1200, BELLEVUE, WA, 98004-4787, UNITED STATES FCC ID: 2AT6N-20HBL FCC ID: 2AT6N-20HBR IC: 25348-20HBL IC: 25348-20HBR HVIN: AU-STREAM Hybrid

QA-FR-170-B AUSOUNDS INTELLIGENCE, LLC Address: 929 108TH AVE NE STE 1200, BELLEVUE, WA, 98004-4787, United States E-mail: [email protected] Tel: +86-755 33622851 Fax: +86-755 33622854 FCC Authorization 2020/03/25 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We (AUSOUNDS INTELLIGENCE, LLC), the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: RUI Qiu Business Manager

AUSOUNDS INTELLIGENCE, LLC Address: 929 108TH AVE NE STE 1200, BELLEVUE, WA, 98004-4787, United States E-mail: [email protected] Tel: +86-755 33622851 Fax: +86-755 33622854 FCC ID Cover Letter The AUSOUNDS INTELLIGENCE, LLC, here by submit justification for placing the FCC ID in the Associated user Manual. According to the FCC Regulation and Guidance (KDB Publication 784748 D01 v09r01) allows for the FCC ID to be moved to the User’s manual and charging case if the device is unquestionably too small for the FCC ID to be printed. Referring to the above quote, as the device is too small for FCC ID: 2AT6N-20HBL to be printed. The FCC ID will be moved to the last page of user’s manual and charging case. The details are as below: A. Top cover (A): The plastic of the top cover does not provide enough physical space to fit the printing of the FCC ID according to below reference picture. B. Area (B): The plastic of the top cover does not provide enough physical space to fit the printing of the FCC ID according to below reference picture. A B Conclusion: Based on the above description of area A to B, we conclude that the device is unquestionably too small for enabling the FCC ID to be printed onto any surface. We therefore request to move the FCC ID to the user manual and charging case. FCC ID Label Sincerely, Signature: RUI Qiu Business Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Charging Box

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information = The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS BT Antenna

Appendix A: 20dB Emission Bandwidth Test Result TestMode Antenna Channel 20db EBW[MHz] Limit[MHz] Verdict DH1 Ant1 2402 0.927 --- PASS 2441 0.927 --- PASS 2480 0.927 --- PASS 2DH1 Ant1 2402 1.254 --- PASS 2441 1.251 --- PASS 2480 1.254 --- PASS 3DH1 Ant1 2402 1.263 --- PASS 2441 1.263 --- PASS 2480 1.260 --- PASS Test Graphs DH1_Ant1_2402 DH1_Ant1_2441 DH1_Ant1_2480 2DH1_Ant1_2402 2DH1_Ant1_2441 2DH1_Ant1_2480 3DH1_Ant1_2402 3DH1_Ant1_2441 3DH1_Ant1_2480 Appendix B: Occupied Channel Bandwidth Test Result TestMode Antenna Channel OCB [MHz] Limit[MHz] Verdict DH1 Ant1 2402 0.854 --- PASS 2441 0.854 --- PASS 2480 0.854 --- PASS 2DH1 Ant1 2402 1.154 --- PASS 2441 1.154 --- PASS 2480 1.154 --- PASS 3DH1 Ant1 2402 1.151 --- PASS 2441 1.151 --- PASS 2480 1.151 --- PASS Test Graphs DH1_Ant1_2402 DH1_Ant1_2441 DH1_Ant1_2480 2DH1_Ant1_2402 2DH1_Ant1_2441 2DH1_Ant1_2480 3DH1_Ant1_2402 3DH1_Ant1_2441 3DH1_Ant1_2480 Appendix C: Maximum conducted Peak output power Test Result TestMode Antenna Channel Result[dBm] Limit[dBm] Verdict DH1 Ant1 2402 4.60 <=20.97 PASS 2441 4.58 <=20.97 PASS 2480 4.51 <=20.97 PASS 2DH1 Ant1 2402 3.98 <=20.97 PASS 2441 3.93 <=20.97 PASS 2480 3.86 <=20.97 PASS 3DH1 Ant1 2402 4.39 <=20.97 PASS 2441 4.36 <=20.97 PASS 2480 4.29 <=20.97 PASS Appendix D: Carrier frequency separation Test Result TestMode Antenna Channel Result[MHz] Limit[MHz] Verdict DH1 Ant1 Hop 1.003 >=0.618 PASS 2DH1 Ant1 Hop 1.003 >=0.834 PASS 3DH1 Ant1 Hop 1.000 >=0.840 PASS Test Graphs DH1_Ant1_Hop 2DH1_Ant1_Hop 3DH1_Ant1_Hop Appendix E: Time of occupancy Test Result Test Mode AntennaChannel Burst Width [ms] Total Hops [Num] Result[s]Limit[s] Verdict DH1 Ant1 Hop 0.37 330 0.121 <=0.4 PASS DH3 Ant1 Hop 1.62 200 0.323 <=0.4 PASS DH5 Ant1 Hop 2.855 140 0.3997 <=0.4 PASS 2DH1 Ant1 Hop 0.38 320 0.120 <=0.4 PASS 2DH3 Ant1 Hop 1.62 170 0.275 <=0.4 PASS 2DH5 Ant1 Hop 2.86 130 0.372 <=0.4 PASS 3DH1 Ant1 Hop 0.38 320 0.120 <=0.4 PASS 3DH3 Ant1 Hop 1.62 130 0.210 <=0.4 PASS 3DH5 Ant1 Hop 2.86 130 0.372 <=0.4 PASS Note 1: A period time=0.4*79=31.6(S), Result= Burst Width* Total Hops Note 2: Total Hops=Hopping Number in 3.16s*10 Note 3: Hopping Number in 3.16s=Total of highest signals in 3.16s (Second high signals were other channel) Test Graphs DH1_Ant1_Hop DH3_Ant1_Hop DH5_Ant1_Hop 2DH1_Ant1_Hop 2DH3_Ant1_Hop 2DH5_Ant1_Hop 3DH1_Ant1_Hop 3DH3_Ant1_Hop 3DH5_Ant1_Hop Appendix F: Number of hopping channels Test Result Test Mode Antenna Channel Result[Num] Limit[Num] Verdict DH1 Ant1 Hop 79 >=15 PASS 2DH1 Ant1 Hop 79 >=15 PASS 3DH1 Ant1 Hop 79 >=15 PASS Test Graphs DH1_Ant1_Hop 2DH1_Ant1_Hop 3DH1_Ant1_Hop Appendix G:Band edge measurements Test Graphs DH1_Ant1_Low_2402 DH1_Ant1_High_2480 DH1_Ant1_Low_Hop_2402 DH1_Ant1_High_Hop_2480 2DH1_Ant1_Low_2402 2DH1_Ant1_High_2480 2DH1_Ant1_Low_Hop_2402 2DH1_Ant1_High_Hop_2480 3DH1_Ant1_Low_2402 3DH1_Ant1_High_2480 3DH1_Ant1_Low_Hop_2402 3DH1_Ant1_High_Hop_2480

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.247 TEST REPORT For AUSOUNDS INTELLIGENCE, LLC 929 108TH AVE NE STE 1200, BELLEVUE, WA, 98004-4787, United States FCC ID: 2AT6N-20HBL Report Type: Original Report Product Type: AU-STREAM Hybrid Re port Number: RSZ200227810-00A Re port Date: 2020-04-01 Reviewed B y: Jimmy Xiao RF En gineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200227810-00A FCC Part 15.247 Page 2 of 25 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 SPECIAL ACCESSORIES ................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 EXTERNAL I/O CABLE .................................................................................................................................................. 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 TEST EQUIPMENT LIST ........................................................................................................................................... 9 FCC§15.247 (i), §1.1307 (b) (1) &§2.1093 – RF EXPOSURE ...................................................................................... 10 APPLICABLE STANDARD ............................................................................................................................................ 10 FCC §15.203 – ANTENNA REQUIREMENT .......................................................................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 11 FCC §15.205, §15.209 & §15.247(d) – RADIATED EMISSIONS ........................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 EUT SETUP ................................................................................................................................................................ 12 EMI TEST RECEIVER & SPECTRUM ANALYZER SETUP .............................................................................................. 13 TEST PROCEDURE ...................................................................................................................................................... 13 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 13 TEST RESULTS SUMMARY .......…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emissions View (Below 1 GHz) Radiated Emissions View (Above 1 GHz)