2AT8OMT10312PT1935REMOTE CONTROL CAR SERIES

FCC ID :2AT8OMT10312PT1935 ZHANDA TOYS FACTORY XINLIAO INDUSTRIAL ZONE,LIANXIA,CHENGHAI DISTRICT, SHANTOU CITY,GUANGDONG PROVINCE,CHINA REMOTE CONTROL CAR SERIES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Differences Declaration To whom concern, We company ZHANDA TOYS FACTORY hereby declares: The product models 008-18, PT1935, ZD008-1, ZD008-2, ZD008-3, ZD008-5, ZD008-6, ZD008-7, ZD008-71, ZD008-8, ZD008-8X, ZD008-6X, ZD008-2X, ZD008-PH1, ZD008-PH2, ZD008-11, ZD008-12, ZD008-13, ZD008-14, ZD008-12X, 008-PX, 008-18, 008-18X, 008-20, 008-20X, 360, 360A, 360X1, 008-364, 008-368, 008-369, 008-XD1, 008-XD2, 008-D1, 008-D2, ZD360, ZD360X, ZD380, ZD008-A1, ZD008-B1, ZD008-C1, 008-WA201, 008-WA202, 008-WA203, 008-WA204, 008-WA205, 008-A127, 008-A128, 008-1611, 008-1612, 008-A16, 008-A161, ZD008, ZD008A, 008-04C4, 008-04C5, 008-04C7, 008-04B1, 008-04B2, 008-04B3, 008-RD1 360J, 008-390, 008-360, 008-360T, 008-360V, 008-366, 008-360KL, 008-360KL1, 008-370, 008T, 008-360S1, 008-360S1A, 008-360S2A, 008-360Y, 008-360Y1, 008-360Y1A, 008-360Y2A, 008-360SY, 008-3604, 9808M-SP are identical in the same PCB layout, interior structure and electrical circuits, The differences are appearance color and model name for commercial purpose. Authorized signature: Name: Yang Da Date: 2021-07-28

DATE : 2021-07-28 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Jason Wu of Global United Technology Services Co., Ltd.and No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with ZHANDA TOYS FACTORY and XINLIAO INDUSTRIAL ZONE, LIANXIA, CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE 515800, China Signature: Name: Yang Da Title: Manager Company: ZHANDA TOYS FACTORY

ZHANDA TOYS FACTORY DATE : 2021-07-28 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AT8OMT10312PT1935 Product Name: REMOTE CONTROL CAR SERIES Request for Confidentiality To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature: Name: Yang Da Title: Manager Company: ZHANDA TOYS FACTORY

Test Model No.: 008‐18

Test Model No.: 008‐18

Global United Technology Services Co., Ltd. Report No.: GTS202105000128F01 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 17 TEST REPORT . Applicant: ZHANDA TOYS FACTORY Address of Applicant: XINLIAO INDUSTRIAL ZONE, LIANXIA, CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE 515800, China Manufacturer: ZHANDA TOYS FACTORY Address of Manufacturer: XINLIAO INDUSTRIAL ZONE, LIANXIA, CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE 515800, China Equipment Under Test (EUT) Product Name: REMOTE CONTROL CAR SERIES Model No.: See Section 5.1 FCC ID: 2AT8OMT10312PT1935 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.227 Date of sample receipt: May 18, 2021 Date of Test: May 19, 2021-July 27, 2021 Date of report issued: July 28, 2021 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202105000128F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 17 2 Version Version No. Date Description 01 July 28, 2021 Original Prepared By: Date: July 28, 2021 Project Engineer Check By: Date: July 28, 2021 Reviewer Report No.: GTS202105000128F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 17 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 VERSION .................................................................................................................................................... 2 3 CONTENTS ................................................................................................................................................ 3 4 TEST SUMMARY ....................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY .............................................................................................................. 4 5 GENERAL INFORMATION ........................................................................................................................ 5 5.1 GENERAL DESCRIPTION OF EUT ........................................................................................................... 5 5.2 TEST MODE .......................................................................................................................................... 6 5.3 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 5.4 TEST FACILITY ..................................................................................................................................... 6 5.5 TEST LOCATION ................................................................................................................................... 6 6 EQUIPMENT LIST ...................................................................................................................................... 7 7 RADIO SPECTRUM TECHNICAL REQUIREMENT .................................................................................. 9 7.1 ANTENNA REQUIREMENT ...................................................................................................................... 9 7.1.1 Test Requirement: ......................................................................................................................... 9 7.1.2 Conclusion ..................................................................................................................................... 9 8 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 10 8.1 20DB BANDWIDTH .............................................................................................................................. 10 8.1.1 E.U.T. Operation .......................................................................................................................... 10 8.1.2 Test Setup Diagram ..................................................................................................................... 10 8.1.3 Measurement Procedure and Data ............................................................................................. 10 8.2 FIELD STRENGTH OF THE FUNDAMENTAL SIGNAL (15.227(A)) .............................................................. 11 8.2.1 E.U.T. Operation .......................................................................................................................... 11 8.2.2 Test Setup Diagram ..................................................................................................................... 11 8.2.3 Measurement Procedure and Data ............................................................................................. 11 8.3 RADIATED EMISSIONS ......................................................................................................................... 13 8.3.1 E.U.T. Operation .......................................................................................................................... 14 8.3.2 Test Setup Diagram .................................................................................................................…

Text truncated - open the document above for the full version.

Test Model No.: 008‐18 Radiated Emission