2ATAD-SPM-208LKitchen Machine

SPM-208L User Manual Table of Contents 01/ Important Safety Instructions 02/ Know About Your Sunway Multi-Function Cooking Machine 03/ Accessories of Sunway Multi-Function Cooking Machine: a. Mixing mug b. Mug lid c. Sealing ring d. Measuring cup e. Round steamer f. Steamer set h. Blade i. Blade sealing ring j. Dough stirrer k. Dough stirring rod 04/ Touch Panel Operation: a. Boot animation b. Boot guide c. STT dial function d. Interface icons e. Basic mode f. Preset mode g. Electronic scale mode h. Recipe mode i. Setting mode j. Internal mode k. Life test l. Abnormal operation 05/ How to Use Your Sunway Multi-Function Cooking Machine 06/ Cleaning Guide 07/ Troubleshooting 08/ Technical Parameters 01. Important Safety Instructions For the sake of your safety, please read the following instructions. Even if you are familiar with this machine, please read these instructions carefully. Follow the instructions below to avoid fire, electric shock or injury. / Before turning on the machine, please make sure that all the basic safety measures mentioned in the manual are taken for fear of fire, electric shock or injury. In order to ensure that all operations are carried out properly, please know about some limitations and potential hazards of this machine. It is very important to read this manual carefully for safe use of this machine. / Do not place the machine, the power plug or the power cord in water or other liquids. Cleaning shall be done with a damp cloth. / Please use the machine at120V, 60Hz. / Do not operate the machine beyond the scope of operation. / Do not repair, disassemble or modify the machine yourself. / Do not allow water or dust into the machine. / Do not use the machine outdoors. / There may be a potential risk of fire, electric shock or injury if parts or accessories not recommended or supplied by the manufacturer are used. / Children are not allowed to use this machine. Keep the appliance and its cord out of reach of children. Children shall not play with the appliance. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. / When the machine is running, do not add any utensils. / Do not extend the power cord without authorization. / Please place the machine in a dry place. Do not use the machine on or near flammable objects, such as curtains, towels or other flammable materials. / After use or during cleaning, make sure the machine is turned off and the power has been disconnected. When disconnecting the power, hold the plug and pull it out of the socket. Do not pull the power cord or pull the machine with the power cord. / Do not hang the power cord on the edge of the table, and keep it away from heat. / Be careful of some surfaces to avoid scald, as some surfaces become hot easily after heating. Let them cool down before cleaning. / Prevent steam scald during use. If necessary, use a cloth to remove the steamer. / If the machine contains hot liquid, have the power disconnected automatically or manually before moving the machine. Be careful not to get scalded by liquid when moving the machine. / Remember to hold the handle of the mug and never touch the mug body. / Do not touch the movable parts on the machine. / Observe the machine or accessories from time to time to avoid the risk of injury. / Do not allow no-load running. / Do not touch the food in the transparent measuring cup directly. / Before running the machine, make sure the transparent measuring cup and lid are installed correctly. / Do not open the lid until the blade completely stops rotating. / Do not lock or block the brake system of the mug lid. Do not touch the sharp blade. When removing the blade from the mug, remember to hold the upper end of the blade to avoid cutting. / If the blade is stuck in the food, please remember to turn off the machine before moving the blade. / Do not heat the transparent measuring cup or other parts in the microwave oven. / The machine shall not be operated if there is something wrong with it. / Do not put the mug or other parts in a sterilizer or a microwave oven. / Make sure the food does not exceed the maximum capacity indicator. / When using a steamer to steam food, make sure the food does not exceed the maximum capacity. / Do not connect the machine to a timer or a remote control system. / When cooking baby food, please check the food concentration frequently to make sure there is no chunky food. / The machine is suitable for home use (and similar use in hotels or restaurants) and is in compliance with safety regulations. / Make sure the steamer is placed correctly on the mug. / Make sure the machine is out of reach of children. / Please use the supplied stirring rod when stirring the food in the mug. Please do not use a metal spoon, a wooden spoon or other objects to stir, because these objects may be stuck by the blade and then cause injury. / Open the lid only when you need to stir the food in the mug. Remember to close the lid when you don’t need to stir. / Avoid placing the machine on the edge of the table for fear of falling. / If you do not need to use the steamer during operation, please ensure an enough distance from the cabinet or the shelf to avoid getting hurt by steam. / Before use, please verify that the waterproof silicone ring on the blade combination is installed for fear that the food will easily flow into the machine during use and cause damage. / Please use AC power supply and a properly installed socket, and verify that the working voltage and frequency are consistent with the rated values (see the machine base). / Repair shall be done by a professional because only the repair done at the after-sales service office can prevent damages of some wire interfaces of the product. Repairing by yourself is highly risky. This machine can be used eithe…

Text truncated - open the document above for the full version.

20

Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Room 02, & 101/E201/E301/E401/E501/E601/E701/E801 of Room 01 1-8/F., No. 7-2. Caipin Road, Science City, GETDD, Guangzhou, Guangdong, China Job No.: 211202061GZU FCC ID: 2ATAD-SPM-208L Version: 06 November 2020 Page 1 of 3 FCC simultaneously transmitter-Mobile (MPE) RF Exposure Compliance Requirement Model no.: SPM-208L 1. Standard requirement Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. (a) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)(mW/cm 2 ) Averaging Times ׀E׀ 2 ׀, H׀ 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f 2 )* 6 30-300 61.4 0.163 1.0 6 300-1500 -- -- f/300 6 1500-100000 -- -- 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)(mW/cm 2 ) Averaging Times ׀E׀ 2 ׀,H׀ 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 -- -- F/1500 30 1500-100000 -- -- 1.0 30 Note: f=frequency in MHz; *Plane-wave equivalent power density Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Room 02, & 101/E201/E301/E401/E501/E601/E701/E801 of Room 01 1-8/F., No. 7-2. Caipin Road, Science City, GETDD, Guangzhou, Guangdong, China Job No.: 211202061GZU FCC ID: 2ATAD-SPM-208L Version: 06 November 2020 Page 2 of 3 FCC simultaneously transmitter-Mobile (MPE) 2. MPE Calculation Method E (V/m)=(30*P*G) 0.5 /d Power Density: Pd(W/m 2 )=E 2 /377 E=Electric Field (V/m) P=Peak RF output Power (W) G=EUT Antenna numeric gain (numeric) d= Separation distance between radiator and human body (m) The formula can be changed to Pd= (30*P*G)/(377*d 2 ) From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. 3. Calculated Result and Limit WIFI: Peak Output Power = 16.15dBm(max.value declared by client), antenna gain = 0.71dBi Frequency (MHz) Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2412-2462 1.18 16.15 41.21 0.00965 1 Complies MPE ratio: 0.00965(mW/cm 2 )/1(mW/cm 2 ) =0.00965 Bluetooth(BLE): Peak Output Power = 1.12dBm(max.value declared by client), antenna gain = 0.71dBi Frequency (MHz) Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2402-2480 1.18 1.12 1.29 0.00030 1 Complies MPE ratio: 0.00030 (mW/cm2)/1 (mW/cm2) = 0.00030 Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Room 02, & 101/E201/E301/E401/E501/E601/E701/E801 of Room 01 1-8/F., No. 7-2. Caipin Road, Science City, GETDD, Guangzhou, Guangdong, China Job No.: 211202061GZU FCC ID: 2ATAD-SPM-208L Version: 06 November 2020 Page 3 of 3 FCC simultaneously transmitter-Mobile (MPE) Bluetooth(BT): Peak Output Power = 0.84dBm(max.value declared by client), antenna gain = 0.71dBi Frequency (MHz) Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2402-2480 1.18 0.84 1.21 0.00028 1 Complies MPE ratio: 0.00028 (mW/cm 2 )/1(mW/cm 2 ) =0.00028 Sum of the MPE ratio for all simultaneously transmitting antennas: 0.00965+0.00030+0.00028 = 0.01023< 1 According to MPE test Exclusion condition in KDB 447498 (D01) General RF Exposure Guidance D01 v06, the MPE report is not required. Test Location: Intertek Testing Services Shenzhen Ltd. Guangzhou Branch All tests were performed at: Room102/104, No 203, KeZhu Road, Science City, GETDD Guangzhou, China

Report No.: BL-SZ2290557-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Shenzhen Kangyuanxin Communication Techniligy Co., Ltd Address: 6th Floor, Building 21, Guangqian Industrial Zone, Longzhu 3rd Road, Xili Town, Nanshan District, Shenzhen Equipment Type: WIFI ANTENNA Model Name: HSL001 Brand Name: KOYOX Test Standard: ANSI/IEEE Std 149-1979 Test Date: Sep. 16, 2022 Date of Issue: Sep. 22, 2022 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Tolan Tu Approved by: Wei Yanquan (Chief Engineer) _______________ _______________ _______________ Report No.: BL-SZ2290557-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Sep. 22, 2022 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 3 1.1 Test Laboratory ................................................................................................................... 3 1.2 Test Location ....................................................................................................................... 3 2 PRODUCT INFORMATION ....................................................................................................... 4 2.1 Applicant Information ........................................................................................................... 4 2.2 Manufacturer Information .................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) ......................................................... 4 2.4 Ancillary Equipment ............................................................................................................. 4 2.5 Technical Information .......................................................................................................... 4 3 SUMMARY OF TEST RESULTS ............................................................................................... 5 3.1 Test Standards .................................................................................................................... 5 3.2 Test Verdict ......................................................................................................................... 5 3.3 Test Uncertainty .................................................................................................................. 5 4 GENERAL TEST CONFIGURATIONS ...................................................................................... 6 4.1 Test Condition ..................................................................................................................... 6 4.2 Test Equipment List ............................................................................................................. 6 4.3 Test Setup ........................................................................................................................... 7 ANNEX A TEST RESULTS ........................................................................................................... 8 A.1 Gain and Efficiency ............................................................................................................. 8 ANNEX B RADIATION PATTERN ................................................................................................ 9 ANNEX C TEST SETUP PHOTOS ............................................................................................. 12 ANNEX D EUT PHOTO .............................................................................................................. 12 Report No.: BL-SZ2290557-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Report No.: BL-SZ2290557-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Shenzhen Kangyuanxin Communication Techniligy Co., Ltd Address 6th Floor, Building 21, Guangqian Industrial Zone, Longzhu 3rd Road, Xili Town, Nanshan District, Shenzhen 2.2 Manufacturer Information Manufacturer Shenzhen Kangyuanxin Communication Techniligy Co., Ltd Address 6th Floor, Building 21, Guangqian Industrial Zone, Longzhu 3rd Road, Xili Town, Nanshan District, Shenzhen 2.3 General Description for Equipment under Test (EUT) EUT Name WIFI ANTENNA Model Name Under Test HSL001 Antenna Type PIFA Antenna Dimensions 30*3 mm 2.4 Ancillary Equipment Note: Not applicable. 2.5 Technical Information Test Frequencies …

Text truncated - open the document above for the full version.

Report No.: BL-SZ2290557-AA 1 / 1 EUT PHOTO Antenna

Report No.: BL-SZ2290557-AO 1 / 1 TEST SETUP PHOTOS

Sunway Products Hong Kong Company Limited TEST REPORT SCOPE OF WORK EMC TESTING–SPM-208L REPORT NUMBER 211202061GZU-003 ISSUE DATE [REVISED DATE] 28-October-2022 [--------------------] PAGES 68 DOCUMENT CONTROL NUMBER FCC BT 3.0-e © 2017 INTERTEK TEST REPORT Room 02, & 101/E201/E301/ E401/E501/E601/E701/E801 of Room 01 1-8/F., No. 7-2. Caipin Road, Science City, GETDD, Guangzhou, Guangdong, China Telephone: +86 20 8213 9688 Facsimile: +86 20 3205 7538 www.intertek.com.cn This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Room 02, & 101/E201/E301/E401/E501/E601/E701/E801 of Room 01 1-8/F., No. 7-2. Caipin Road, Science City, GETDD, Guangzhou, Guangdong, China Version: 03 September 2021 Page 2 of 68 FCC BT 3.0-e Applicant Name & Address : Sunway Products Hong Kong Company Limited ROOM 1013, NEW COMMERCE CENTRE, NO.19 ON SUM STREET, SHATIN, NT, HONG KONG, China Manufacturing Site : Guangzhou Shengwei Electric Manufacturing Company Limited Jintian Industry Zone, Huadong Town, Huadu District, Guangzhou Guangdong, China Intertek Report No: FCC ID: 211202061GZU-003 2ATAD-SPM-208L Test standards 47 CFR PART 15 Subpart C: 2020 section 15.247 Sample Description Product : Kitchen Machine Model No. : SPM-208L Electrical Rating : 120V 60Hz 1350W Serial No. : Not Labeled Date Received : 02 December 2021 Date Test Conducted : 06 September 2022 to 11 October 2022 Prepared and Checked By Elena lei Engineer Approved By: Dean Liu Project Engineer TEST REPORT Intertek Report No.: 211202061GZU-003 Version: 03 September 2021 Page 3 of 68 FCC BT 3.0-e CONTENT TEST REPORT ........................................................................................................................... 1 CONTENT ............................................................................................................................. 3 1.0 TEST RESULT SUMMARY ............................................................................................ 4 2.0 GENERAL DESCRIPTION .............................................................................................. 5 2.1 PRODUCT DESCRIPTION ........................................................................................................ 5 2.2 RELATED SUBMITTAL(S) GRANTS ............................................................................................ 6 2.3 TEST METHODOLOGY ........................................................................................................... 7 2.4 TEST FACILITY ...................................................................................................................... 7 3.0 SYSTEM TEST CONFIGURATION .................................................................................. 7 3.1 JUSTIFICATION ..................................................................................................................... 7 3.2 EUT EXERCISING SOFTWARE.................................................................................................. 8 3.3 SPECIAL ACCESSORIES ........................................................................................................... 8 3.4 MEASUREMENT UNCERTAINTY ............................................................................................... 8 3.5 EQUIPMENT MODIFICATION .................................................................................................. 9 3.6 SUPPORT EQUIPMENT LIST AND DESCRIPTION .......................................................................... 9 4.0 MEASUREMENT RESULTS ......................................................................................... 11 4.1 ANTENNA REQUIREMENT .................................................................................................... 11 4.2 20 DB BANDWIDTH ........................................................................................................... 12 4.3 CARRIER FREQUENCIES SEPARATED ....................................................................................... 19 4.4 HOPPING CHANNEL NUMBER .............................................................................................. 22 4.5 DWELL TIME ..................................................................................................................... 25 4.6 PSEUDO RANDOM FREQUENCY HOPPING SEQUENCE ............................................................... 35 4.6.1 Standard requirement ........................................................................................... 35 4.6.2 EUT Pseudo random Frequency Hopping Sequence .............................................. 35 4.7 MAXIMUM PEAK CONDUCTED OUTPUT POWER ..................................................................... 36 4.8 OUT OF BAND CONDUCTED EMISSIONS ................................................................................. 42 4.9 OUT OF BAND RADIATED EMISSIONS .................................................................................... 45 4.10 RADIATED EMISSIONS IN RESTRICTED BANDS ...................................................................... 45 4.11 BAND EDGES REQ…

Text truncated - open the document above for the full version.

Note:EUT is positioned at the center of the turntable to keep 3 m between the measurement antenna and EUT for the radiated emissions measurements Radiated Emission (30MHz-1000MHz) Radiated Emission (Above 1000MHz) Conducted disturbance voltage at mains ports（150KHz-30MHz）