2ATFT-102KDigital picture frame

FCC ID Label Location 40mm*30mm FCC ID: 2ATFT-102K This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Report No.: AGC08389250804AP03 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC08389250804AP03 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************

Page 1 of 14 Antenna Test Report Report No.: AGC08389250804PA01 PRODUCT DESIGNATION : Digital picture frame BRAND NAME : N/A MODEL NAME : 102K, 101K, 101KZ, 102KZ, 103K, 103KZ, 105K, 105KZ, 106K, 106KZ, 110K, 110KZ, 111K, 111KZ, 112K, 112KZ, 114K, 114KZ, 119K, 119KZ, 120K, 120KZ, 156K, 156KZ, 157K, 157KZ, 158K, 158KZ, 159K, 159KZ, 160K, 160KZ, 215K, 215KZ, 216K, 216KZ, 320K, 320KZ, 321K, 321KZ, 101C, 102C, 103C, 156C, 157C, 158C, 159C, 160C, 215C, 216C, 217C, 320C, 321C APPLICANT : Shenzhen Kejinming Electronic Co., Ltd. DATE OF ISSUE : Sep. 10, 2025 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC08389250804PA01 Page 2 of 13 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep. 10, 2025 Valid Initial release Report No.: AGC08389250804PA01 Page 3 of 13 TABLE OF CONTENTS 1. PRODUCT INFORMATON ...................................................................................................................... 4 2. TEST FACILITY ....................................................................................................................................... 5 3. TEST EQUIPMENT LIST ......................................................................................................................... 5 4. MEASUREMENT UNCERTAINTY .......................................................................................................... 5 5. TEST SUMMARY LIST ............................................................................................................................ 5 6. TEST SETUP ........................................................................................................................................... 6 7. TEST RESULTS ....................................................................................................................................... 7 7.1. VSWR ................................................................................................................................................ 7 7.2. GAIN AND EFFICIENCY ................................................................................................................... 8 7.3. RADIATION PATTERN ...................................................................................................................... 9 APPENDIX A: PHOTOGRAPHS OF TEST SETUP ................................................................................. 11 APPENDIX B: PHOTOGRAPHS OF EUT ................................................................................................ 12 Report No.: AGC08389250804PA01 Page 4 of 13 1. PRODUCT INFORMATON General information Applicant Shenzhen Kejinming Electronic Co., Ltd. Address Floor1-6, BlockB7, YintianIndustrialPark, Yantian Community, XixiangStreet, Bao’ anDist., Shenzhen, Guangdong, China Manufacturer Shenzhen Kejinming Electronic Co., Ltd. Address Floor1-6, BlockB7, YintianIndustrialPark, Yantian Community, XixiangStreet, Bao’ anDist., Shenzhen, Guangdong, China Factory Shenzhen Kejinming Electronic Co., Ltd. Address Floor1-6, BlockB7, YintianIndustrialPark, Yantian Community, XixiangStreet, Bao’ anDist., Shenzhen, Guangdong, China Product Designation Digital picture frame Brand Name N/A Test Model 102K Series Model(s) 101K, 101KZ, 102KZ, 103K, 103KZ, 105K, 105KZ, 106K, 106KZ, 110K, 110KZ, 111K, 111KZ, 112K, 112KZ, 114K, 114KZ, 119K, 119KZ, 120K, 120KZ, 156K, 156KZ, 157K, 157KZ, 158K, 158KZ, 159K, 159KZ, 160K, 160KZ, 215K, 215KZ, 216K, 216KZ, 320K, 320KZ, 321K, 321KZ, 101C, 102C, 103C, 156C, 157C, 158C, 159C, 160C, 215C, 216C, 217C, 320C, 321C Difference Description All the series models are the same as the test model except for the model names. Date of receipt of test item Aug. 14, 2025 Date of test Aug. 14, 2025 to Sep. 10, 2025 Report Template AGCRT-ER-PA/V1.0 Technical information Frequency Range 2400-2500MHz Test Frequencies 2400MHz, 2410MHz, 2420MHz, 2430MHz, 2440MHz, 2450MHz, 2460MHz, 2470MHz, 2480MHz, 2490MHz, 2500MHz Antenna Type Integral Antenna Dimensions 44.8mm*6.2mm RF Cable 10cm Impedance 50Ω Maximum test values Gain: 3.88dBi; Efficiency: 39.886%; VSWR: 1.098 U Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Thea Huang (Project Engineer) Sep. 10, 2025 Reviewed By Bibo Zhang (Reviewer) Sep. 10, 2025 Approved By Angela Li (Authorized Officer) Sep. 10, 2025 Report No.: AGC08389250804PA01 Page 5 of 13 2. TEST FACILITY 3. TEST EQUIPMENT LIST Equipment Manufacturer Model Cal. Date Cal. Due Antenna Measurement System ETS-Lindgren AMS-8600 Nov. 27, 2024 Nov. 26, 2025 Network Analyzer R&S 101443 Jul. 18, 2025 Jul. 17, 2026 Test Software ETS-Lindgren EMQuest Ver V1.12 N/A 4. MEASUREMENT UNCERTAINTY The uncertainty is calculated using the methods suggested in the “Guide to the Expression of Uncertainty in measurement” (GUM) published by CISPR and ANSI. - Uncertainty of VSWR, Uc = ±1.5dB - Uncertainty of Gain, Uc = ±0.8dB 5. TEST SUMMARY LIST NO. Test item Remark 1 VSWR -- 2 Gain and efficiency -- 3 Radiation pattern -- Test Site Attestation of Global Compliance (Shenzhen) Co., Ltd Location 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Report No.: AGC08389250804PA01 Page 6 of 13 6. TEST SETUP Report No.: AGC08389250804PA01 Page 7 of 13 7. TEST RESULTS 7.1. VSWR Frequency(MHz) VSWR 2402 1.084 U 2450 1.060 U 2480 1.081 U 2420 1.098 U Report No.: AGC08389250804PA01 Page 8 of 13 7.2. GAIN AND EFFICIENCY Frequency(MHz) Efficiency(dB) Efficiency(%) Gain(dBi) 2400 -4.941 32.052 1.67 2410 -4.944 32.032 1.81 2420 -5.029 31.409 1.88 2430 -4.765 33.378 2.38 2440 -4.492 35.545 2.76 2450 -4.373 36.530 2.93 2460 -4.303 37.129 3.08 2470 -4.362 36.628 3.19 2480 -4.133 38.606 3.53 2490 -3.992 39.886 3.79 2500 -4.004 39.779 3.88 Report No.: AGC08389250804PA01 Page 9 of 13 7.3. RADIATION PATTERN 2D POLAR RADIATION PATTERN FREQUENCY=24…

Text truncated - open the document above for the full version.

Report No.: AGC08389250804FR01 Page 65 of 84 Test_Graph_802.11n20_ANT1_2412_MCS0_Lower Band Edge Emissions Test_Graph_802.11n40_ANT1_2422_MCS0_Lower Band Edge Emissions Report No.: AGC08389250804FR01 Page 66 of 84 Test_Graph_802.11b_ANT1_2412_1Mbps_Higher Band Edge Emissions Test_Graph_802.11g_ANT1_2412_6Mbps_Higher Band Edge Emissions Report No.: AGC08389250804FR01 Page 67 of 84 Test_Graph_802.11n20_ANT1_2412_MCS0_Higher Band Edge Emissions Test_Graph_802.11n40_ANT1_2422_MCS0_Higher Band Emissions Report No.: AGC08389250804FR01 Page 68 of 84 11. Radiated Spurious Emission 11.1 Measurement Limits  15.209(a) Limit in the below table has to be followed Frequencies (MHz) Field Strength (microvolts/meter) Measurement Distance (meters) 0.009~0.490 2400/F(kHz) 300 0.490~1.705 24000/F(kHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 Note: All modes were tested for restricted band radiated emission, the test records reported below are the worst result compared to other modes. 11.2 Measurement Procedure 1. The EUT was placed on the top of the turntable 0.8 or 1.5 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emission, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. For emissions above 1GHz, use 1MHz RBW and 3MHz VBW for peak reading. Place the measurement antenna away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. 7. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the Report No.: AGC08389250804FR01 Page 69 of 84 pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum values. 8. If the emissions level of the EUT in peak mode was 3 dB lower than the average limit specified, then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions which do not have 3 dB margin will be repeated one by one using the quasi-peak method for below 1GHz. 9. For testing above 1GHz, the emissions level of the EUT in peak mode was lower than average limit (that means the emissions level in peak mode also complies with the limit in average mode), then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions will be measured in average mode again and reported. 10. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. High - Low scan is not required in this case.  The following table is the setting of spectrum analyzer and receiver. Spectrum Parameter Setting Start ~Stop Frequency 9kHz~150KHz/RB 200Hz for QP Start ~Stop Frequency 150kHz~30MHz/RB 9kHz for QP Start ~Stop Frequency 30MHz~1000MHz/RB 120kHz for QP Start ~Stop Frequency 1GHz~26.5GHz 1MHz/3MHz for Peak, 1MHz/3MHz for Average Receiver Parameter Setting Start ~Stop Frequency 9kHz~150KHz/RB 200Hz for QP Start ~Stop Frequency 150kHz~30MHz/RB 9kHz for QP Start ~Stop Frequency 30MHz~1000MHz/RB 120kHz for QP Report No.: AGC08389250804FR01 Page 70 of 84  Quasi-Peak Measurements below 1GHz 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. Span was set greater than 1MHz 3. RBW = as shown in the table above 4. Detector = CISPR quasi-peak 5. Sweep time = auto couple 6. Trace was allowed to stabilize  Peak Measurements above 1GHz 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 1MHz 3. VBW = 3MHz 4. Detector = peak 5. Sweep time = auto couple 6. Trace mode = max hold 7. Trace was allowed to stabilize  Average Measurements above 1GHz 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 1MHz 3. VBW ≥ [3 × RBW] 4. Detector = Power averaging (rms) 5. Averaging type = power (i.e., rms) 6. Sweep time = auto 7. Perform a trace average of at least 100 traces. 8. The applicable correction factor is [10*log (1 / D)], where D is the duty cycle. The factor had been edited in the “Input Correction” of the Spectrum Analyzer. Report No.: AGC08389250804FR01 Page 71 of 84 11.3 Measurement Setup (Block Diagram of Configuration) Radiated Emission Test Setup 9kHz-30MHz Radiated Emission Test Setup 30MHz-1000MHz R…

Text truncated - open the document above for the full version.

Page 1 of 84 FCC Test Report Report No.: AGC08389250804FR01 FCC ID : 2ATFT-102K APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Digital picture frame BRAND NAME : N/A MODEL NAME : 102K, 101K, 101KZ, 102KZ, 103K, 103KZ, 105K, 105KZ, 106K, 106KZ, 110K, 110KZ, 111K, 111KZ, 112K, 112KZ, 114K, 114KZ, 119K, 119KZ, 120K, 120KZ APPLICANT : Shenzhen Kejinming Electronic Co., Ltd. DATE OF ISSUE : Sep. 28, 2025 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC08389250804FR01 Page 2 of 84 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep. 28, 2025 Valid Initial Release Report No.: AGC08389250804FR01 Page 3 of 84 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Table of Carrier Frequency ........................................................................................................................ 7 2.3 IEEE 802.11n Modulation Scheme ........................................................................................................... 8 2.4 Related Submittal(S) / Grant (S) ............................................................................................................... 9 2.5 Test Methodology ...................................................................................................................................... 9 2.6 Special Accessories .................................................................................................................................. 9 2.7 Equipment Modifications ........................................................................................................................... 9 2.8 Antenna Requirement................................................................................................................................ 9 2.9 Description of Test Software ................................................................................................................... 10 3. Test Environment .......................................................................................................................................... 11 3.1 Address of The Test Laboratory .............................................................................................................. 11 3.2 Test Facility .............................................................................................................................................. 11 3.3 Environmental Conditions ....................................................................................................................... 12 3.4 Measurement Uncertainty ....................................................................................................................... 12 3.5 List of Equipment Used ........................................................................................................................... 13 4.System Test Configuration ............................................................................................................................ 15 4.1 EUT Configuration ................................................................................................................................... 15 4.2 EUT Exercise ........................................................................................................................................... 15 4.3 Configuration of Tested System .............................................................................................................. 15 4.4 Equipment Used in Tested System ......................................................................................................... 16 4.5 Summary of Test Results ........................................................................................................................ 17 5. Description of Test Modes ........................................................................................................................... 18 6. Duty Cycle Measurement ............................................................................................................................. 19 7. RF Output Power Measurement .................................................................................................................. 21 7.1 Provisions Applicable .............................................................................................................................. 21 7.2 Measurement Procedure ......................................................................................................................... 21 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 21 7.4 Measurement Result ............................................................................................................................... 22 8. 6dB Bandwidth Measurement ...................................................................................................................... 23 8.1 Provisions Applicable .............................................................................................................................. 23 8.2 Measurement Procedure ......................................................................................................................... 23 8.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 23 8.4 Measurement Result .............…

Text truncated - open the document above for the full version.

Page 1 of 11 RF Exposure Report Report No.: AGC08389250804FH01 FCC ID : 2ATFT-102K APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Digital picture frame BRAND NAME : N/A MODEL NAME : 102K, 101K, 101KZ, 102KZ, 103K, 103KZ, 105K, 105KZ, 106K, 106KZ, 110K, 110KZ, 111K, 111KZ, 112K, 112KZ, 114K, 114KZ, 119K, 119KZ, 120K, 120KZ APPLICANT : Shenzhen Kejinming Electronic Co., Ltd. DATE OF ISSUE : Sep. 10, 2025 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC08389250804FH01 Page 2 of 11 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep. 10, 2025 Valid Initial Release Report No.: AGC08389250804FH01 Page 3 of 11 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC08389250804FH01 Page 4 of 11 1. General Information Applicant Shenzhen Kejinming Electronic Co., Ltd. Address Floor1-6, BlockB7, YintianIndustrialPark, Yantian Community, XixiangStreet, Bao’ anDist., Shenzhen, Guangdong, China Manufacturer Shenzhen Kejinming Electronic Co., Ltd. Address Floor1-6, BlockB7, YintianIndustrialPark, Yantian Community, XixiangStreet, Bao’ anDist., Shenzhen, Guangdong, China Factory Shenzhen Kejinming Electronic Co., Ltd. Address Floor1-6, BlockB7, YintianIndustrialPark, Yantian Community, XixiangStreet, Bao’ anDist., Shenzhen, Guangdong, China Product Designation Digital picture frame Brand Name N/A Test Model 102K Series Model(s) 101K, 101KZ, 102KZ, 103K, 103KZ, 105K, 105KZ, 106K, 106KZ, 110K, 110KZ, 111K, 111KZ, 112K, 112KZ, 114K, 114KZ, 119K, 119KZ, 120K, 120KZ Difference Description All the series models are the same as the test model except for the model names. Date of receipt of test item Aug. 14, 2025 Date of Test Aug. 14, 2025 to Sep. 10, 2025 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Thea Huang (Project Engineer) Sep. 10, 2025 Reviewed By Bibo Zhang (Reviewer) Sep. 10, 2025 Approved By Angela Li (Authorized Officer) Sep. 10, 2025 Report No.: AGC08389250804FH01 Page 5 of 11 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz Hardware Version M33-V4.0 Software Version V1.0 Modulation Type 802.11b:(DQPSK, DBPSK, CCK) DSSS 802.11g/n:(64-QAM,16-QAM, QPSK, BPSK) OFDM Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation Integral Antenna Antenna Gain 3.88dBi Minimum Assessment Distance 20cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC08389250804FH01 Page 6 of 11 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) C…

Text truncated - open the document above for the full version.

Report No.: AGC08389250804AP04 Page 1 of 3 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC08389250804AP04 Page 2 of 3 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC08389250804AP04 Page 3 of 3 INTERNAL VIEW OF EUT (FIGURE 4) ****************************************End of Report************************************* 2.4GWIFI Antenna

[Shenzhen Kejinming Electronic Co., Ltd.] [Floor1-6, BlockB7, YintianIndustrialPark, Yantian Community, XixiangStreet, Bao’ anDist., Shenzhen, Guangdong, China] Date: Sep. 12, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ATFT-102K US Agent – Attestation Statement / Part 2.911(d)(7) [Shenzhen Kejinming Electronic Co., Ltd.] certifies, that as of [Sep. 12, 2025], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2ATFT-102K. [Shenzhen Kejinming Electronic Co., Ltd.], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [Shenzhen Kejinming Electronic Co., Ltd.] for FCC ID: 2ATFT-102K. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: [Shenzhen Kejinming Electronic Co., Ltd.] FRN: 0028509735 Designated Agent: FCC US Agent, LLC Company Representative: [Ruiqi Chen] Tel: 0755-27489177 Email: [email protected] Designated Agent Representative: Tim Payne Signature: Signature:

Report No.: AGC08389250804AP04 Page 1 of 5 EXTERNAL PHOTOS All VIEW OF EUT ADAPTER VIEW OF EUT Report No.: AGC08389250804AP04 Page 2 of 5 TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC08389250804AP04 Page 3 of 5 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC08389250804AP04 Page 4 of 5 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: AGC08389250804AP04 Page 5 of 5 PORT VIEW OF EUT ****************************************End of Report*************************************

Shenzhen Kejinming Electronic Co., Ltd. Floor1-6, BlockB7, YintianIndustrialPark, Yantian Community, XixiangStreet, Bao’ anDist., Shenzhen, Guangdong, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Sep. 12, 2025 Subject; Request for Confidentiality FCC ID: 2ATFT-102K To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Ruiqi Chen Title: Sales Director

C5266091_X8_Ed.1 1/1 Letter of Authorization < Shenzhen Kejinming Electronic Co., Ltd.> Company: Shenzhen Kejinming Electronic Co., Ltd. Address: Floor1-6, BlockB7, YintianIndustrialPark, Yantian Community, XixiangStreet, Bao’ anDist., Shenzhen, Guangdong, China Product Name: Digital picture frame Model Number: 102K, 101K, 101KZ, 102KZ, 103K, 103KZ, 105K, 105KZ, 106K, 106KZ, 110K, 110KZ, 111K, 111KZ, 112K, 112KZ, 114K, 114KZ, 119K, 119KZ, 120K, 120KZ FCC Identifier: 2ATFT-102K We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval pr…

Text truncated - open the document above for the full version.