2ATGAST60BD Neo Infusion Pump

RESEARCH & DEVELOPMENT CORP. Technology Center, 340 Commercial Street Manchester, New Hampshire 03101-1108 •(603) 669-5139 DEKA Research & Development Corp. 340 Commercial Street Manchester, NH 03101 United States 2025-05-27 Federal Communication Commission 7435 Oakland Mills Road Columbia, MD 21046 Attestation Statement according to 2.911(d)(5)(i) and 2.911(d)(5)(ii) FCC ID: 2ATGAST60 TO WHOM IT MAY CONCERN: Hereby we certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Further we certify that, as of the date of the filing of the application, DEKA Research & Development Corp. is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, _______________ Jack Murphy DEKA Research & Development Corp. 340 Commercial Street Manchester, NH 03101 603-669-5139 [email protected]

RESEARCH & DEVELOPMENT CORP. Technology Center, 340 Commercial Street Manchester, New Hampshire 03101-1108 •(603) 669-5139 U.S. Agent Designation for Service of Process (Applicant is Both Grantee and U.S. Agent) TO: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant Company name: DEKA Research & Development Corp. FRN #: 0028264091 Grantee Code: 2ATGA Contact Name: Jack Murphy Street Address: 340 Commercial Street City/Province/Zip: Manchester, NH 03101 Telephone No: 603-669-5139 Email: [email protected] Applicant Signature: Date: Signed by (Printed Name/Title): Jack Murphy, Test Manager

Color is shown for placement only. Match color per your documented specification. Figure inside blue icon, inside BD logo, and inside MR warning symbol and text White: C:0 M:0 Y:0 K:0 Background Color Description: Xenoy Grey Color Number: CGC 1005-073117-1 Note: The background color shown here is for reference only. Use the custom color cited. BD logo and product label text C=98 M=62 Y=0 K=14 Blue icon PMS 072C Yellow Warning triangle PMS 129C Symbols Black: C:100 M:100 Y:100 K:100 BD logo Orange : C:0 M:073 Y:98 K:0 No MR warning symbol Pantone 1807C Label Dim: 3.189” x 1.811" Radius: 0.079" x 4 Tolerance: +/-.010 100 - 240 V 50/60 Hz 150 VA For U.S. patents that may apply, see bd.com/patents FCC ID 2ATGAST60 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received including interference that may cause undesired operation. ~ IP33 Model 9200 PCU Neo P00000753 BD ® Neo PCU Model 9200 DOM Part Number: P00000753 DME: 10000399256-00 MR WARNING Projectile Hazard San Diego, California 92121 United States 10020 Pacific Mesa Boulevard Distributed by CareFusion 303, Inc. Manchester, New Hampshire 03101 540 Commercial Street Millyard Advanced Medical Products LLC United States 4 81.0 3 46.0 4X R2.0 ORIENT ARTWORK AS SHOWN ON SHEET 2 14.00 15.53 2X R12.00 21.00 SEE NOTE 14 ADHESIVE THIS SIDE NOTES, UNLESS OTHERWISE SPECIFIED: INTERPRET DRAWING PER ASME Y14.5-2009.1. PARTIALLY DIMENSIONED DRAWING. THIS DRAWING SHALL BE USED WITH 3D-CAD 2. DATA PROVIDED TO COMPLETE THE PRODUCT DEFINITION. DIMENSIONS SHOWN ON THE DRAWING TAKE PRECEDENCE OVER THE 3D-CAD DATA. DIMENSIONS QUERIED FROM 3D-CAD DO NOT REQUIRE FIRST ARTICLE INSPECTION. RELATED TO PERFORMANCE OR SAFETY; NOT A KEY CHARACTERISTIC.3 DENOTES A PROCESS CONTROL KEY CHARACTERISTIC(S) THAT MUST BE 4. INSPECTED. VERIFICATION OF THE FOLLOWING BY C OF C IS REQUIRED: 5. PART TITLEA. PART NUMBERB. PART REVISIONC. QUANTITYD. PO NUMBERE. AUTHORIZED SUPPLIER SIGNATURE AND DATEF. MATERIALG. EU DIRECTIVE 2015/863/EU (ROHS 3) COMPLIANT.H. UL969 COMPLIANTI. DATE OF MANUFACTURE AND SHELF LIFE OF ADHESIVEJ. MATERIAL:6. BASE MATERIAL: POLYCARBONATE, VELVET, 0.005" THICK.A. COLOR: XENOY GREY #1005-073117-1 B. LABEL ADHESIVE: PERMANENT HIGH STRENGTH 3M 467 MP OR 3M 200 MP OR C. EQUIVALENT. LABEL MATERIAL AND ADHESIVE MUST BE IN ACCORDANCE WITH UL969 7. ADHESIVE SHALL BE ADHERED ON A SINGLE FACE SPECIFIED.8. LABEL TO BE SUPPLIED WITH ADHESIVE PROTECTION PAPER THAT IS EASILY 9. REMOVABLE BY HAND OR MACHINE. MATERIAL TO BE FREE FROM SCRATCHES OR ANY VISIBLE DEFECTS/DAMAGE THAT 10. MIGHT COMPROMISE ITS FUNCTIONALITY. VERIFY ARTWORK IS AS SHOWN.11. COPY COLOR AS SHOWN IN TABLE ON SHEET 2.12. PRINTING NOT TO BE BROKEN, FAINT, BLEEDING, BLOTTED OR DISCOLORED.13. NO ADHESIVE IN HATCHED AREA14. REVISIONS ZONEREVDESCRIPTIONDATEECO # 1.0RELEASE TO ECO CONTROL2/27/202321388 1.1 UPDATE NOTES TO REMOVE INCORRECT LABEL REQUIREMENTS. UPDATE ARTWORK FILE LOCATION. TC40000259.AI ARTWORK UPDATED 6/6/202321696 DOCUMENT OR FILEFILENAME AND LOCATION Adobe Illustrator Datasscm://dekasurroundbx:4900//1.%20Doc%20Control//Neo/Documentation/Design%20Outputs/Labels/TC40000259.ai 4 3 2 D C B A 4 3 2 1 C D 1 B A IP NO.:TOOLING STATUS: 1 2 3 LEVEL PROPRIETARY NOTICE N/A SHEET 1 OF 2SCALE: 1:1 FINISH: SEE NOTES MATERIAL: 1.1TC40000259-013RUW9B REVDRAWING NUMBERCAGE CODESIZE ©2018 DEKA RESEARCH & DEVELOPMENT CORP PROJECTION DATEAPPROVED: DATEQ/A: THIRD ANGLE PCU DEVICE LABEL DATEMANUFACTURING: MODEL INFO TITLE DATEENGINEER: DATECHECKED: DATEDRAWN: Released DRAWING IS FOR REFERENCE ONLY UNLESS SPECIFIED AS RELEASED APPROVALSUNLESS OTHERWISE SPECIFIED WT:0.66518516g Tel: 603.669.5139 Manchester, NH 03101 340 Commercial Street The Technology Center www.dekaresearch.com N/A10 RESEARCH & DEVELOPMENT CORPORATION DEKA RESEARCH & DEVELOPMENT CORPORATION PROPRIETARY RIGHTS ARE INCLUDED HEREIN. THIS DOCUMENT CONTAINS DEKA CONFIDENTIAL INFORMATION AND MAY NOT BE COPIED, TRANSFERRED, OR DISCLOSED, EXCEPT AS AUTHORIZED IN WRITING BY DEKA RESEARCH & DEVELOPMENT CORPORATION. UNSPECIFIED GEOMETRY MAY BE OBTAINED FROM THE DATABASE PROVIDED: (1) NAME & VERSION ARE IDENTICAL TO THAT SPECIFIED BELOW & (2) STATE IS SPECIFIED AS "RELEASED" ALL DIMENSIONS ARE IN MILLIMETERS [INCHES] INTERPRET GEOMETRIC DIMENSIONING & TOLERANCING PER ASME Y14.5-2009 REMOVE ALL BURRS AND BREAK SHARP EDGES DO NOT SCALE DRAWING IMPLIED TOLERANCES: .X 0.50[.02] DIMS OVER 150 .X0.25[.01] DIMS UPTO 150 .XX0.13[.005] ANGLES:0.5 TFRIEDRICH 2/15/2023 2/21/2023 2/27/2023 2/22/2023 BHARTWELL SPOST AKACHUCK ESANDS 9/4/2018 MODEL FILE NAME: TC40000259-01, VERSION: 1.1.45, STATE: Released TC40000259-01 1.1.49

A Company: DEKA Research Page 1 of 21 Name: BD Neo Infusion Pump Report: TR3871G Model: BD Neo PCU: 9200 BD Neo Pump Module: 9210 Job: C-3871 Serial: 03010574, 03010575, 03010576 Test Report TR3871G Equipment Under Test: BD Neo Infusion Pump Requirement(s): FCC 2.1091 Test Date(s): 4/14/2025-4/15/2025 Prepared for: DEKA Research Attn: Jack Murphy 340 Commercial Street Manchester, NH 03101 Report Issued by: Anthony Smith, EMC Engineering Specialist Signature: Date: 12/13/2025 Report Reviewed by: Adam Alger, Sr. Manager, EMC Laboratory Signature: Date: 01/21/2026 Report Constructed by: Anthony Smith, EMC Engineering Specialist Signature: Date: 08/26/2025 This test report may not be reproduced, except in full, without approval of Ezurio Company: DEKA Research Page 2 of 21 Name: BD Neo Infusion Pump Report: TR3871G Model: BD Neo PCU: 9200 BD Neo Pump Module: 9210 Job: C-3871 Serial: 03010574, 03010575, 03010576 CONTENTS Ezurio Test Services in Review .................................................................................................................. 3 1 Test Report Summary ........................................................................................................................... 4 2 Client Information ................................................................................................................................. 5 2.1 Equipment Under Test (EUT) Information ................................................................................... 5 2.2 Product Description ..................................................................................................................... 5 2.3 Modifications Incorporated for Compliance ............................................................................... 5 2.4 Deviations and Exclusions from Test Specifications .................................................................... 5 2.5 Additional Information ................................................................................................................ 6 2.6 Software Versions ........................................................................................................................ 6 2.7 Auxiliary Equipment .................................................................................................................... 6 3 References ............................................................................................................................................ 7 4 Uncertainty Summary ........................................................................................................................... 8 5 Test Data ............................................................................................................................................... 9 5.1 Antenna Port Conducted Emissions ............................................................................................ 9 5.1.1 Fundamental Emission Output Power – WLAN 2.4 .............................................................. 10 5.1.2 Fundamental Emission Output Power – WLAN 5 ................................................................. 14 5.1.3 Mobile Device – MPE Evaluation .......................................................................................... 18 6 Revision History .................................................................................................................................. 21 Company: DEKA Research Page 3 of 21 Name: BD Neo Infusion Pump Report: TR3871G Model: BD Neo PCU: 9200 BD Neo Pump Module: 9210 Job: C-3871 Serial: 03010574, 03010575, 03010576 Ezurio Test Services in Review The Ezurio laboratory located at W66 N220 Commerce Court Cedarburg, Wisconsin, 53012 USA is recognized through the following organizations: A2LA – American Association for Laboratory Accreditation Accreditation based on ISO/IEC 17025:2017 with Electrical (EMC) Scope A2LA Certificate Number: 1255.01 Scope of accreditation includes all test methods listed herein unless otherwise noted Federal Communications Commission (FCC) – USA Accredited Test Firm Registration Number: 953492 Recognition of two 3 meter Semi-Anechoic Chambers Innovation, Science and Economic Development Canada Accredited U.S. Identification Number: US0218 Recognition of two 3 meter Semi-Anechoic Chambers Company: DEKA Research Page 4 of 21 Name: BD Neo Infusion Pump Report: TR3871G Model: BD Neo PCU: 9200 BD Neo Pump Module: 9210 Job: C-3871 Serial: 03010574, 03010575, 03010576 1 TEST REPORT SUMMARY During April 14 th , 2025 to April 15 th , 2025 the Equipment Under Test (EUT), BD Neo Infusion Pump, as provided by DEKA Research was tested to the following requirements: RF Exposure Evaluation for Mobile Devices Requirements Description Method Compliant FCC 1.1307, 2.1091 Mobile Device RF Exposure Evaluation Distance ≥ 20 cm Maximum Permissible Exposure Yes Notice: The results relate only to the item tested as configured and described in this report. Any additional configurations, modes of operation, or modifications made to the equipment under test after the specified test date(s) are at the decision of the client and may not apply to the data seen in this test report. The decision rule for Pass / Fail assessment to the specification or standard listed in this test report has been agreed upon by the client and laboratory to be as follows: Measurement Type Rule Emissions – Amplitude 1 dB below specified limit Emissions – Frequency 1% less than the specification Immunity Tested at specified level Company: DEKA Research Page 5 of 21 Name: BD Neo Infusion Pump Report: TR3871G Model: BD Neo PCU: 9200 BD Neo Pump Module: 9210 Job: C-3871 Serial: 03010574, 03010575, 03010576 2 CLIENT INFORMATION Company Name DEKA Research Contact Person Jack Murphy Address 340 Commercial Street Manchester, NH 03101 2.1 Equipment Under Test (EUT) Information The following information has been supplied by the client Product Name BD Neo Infusion Pump Model Number …

Text truncated - open the document above for the full version.

Datasheet DEKA Custom Antenna(s) Neo Dual Band Antenna DKNE-50376-001 TC40002175-01 PCBA Rev: 1.0 Version 1-0 https://www.ezurio.com/ 2 © Copyright 2024 Ezurio All Rights Reserved DEKA Custom Antenna Datasheet Revision History Version Date Notes Contributors Approver 1-0 Jun 9, 2025 Robert Gosewehr https://www.ezurio.com/ 3 © Copyright 2024 Ezurio All Rights Reserved DEKA Custom Antenna Datasheet Contents 1 Specifications ..................................................................................................................................................................................................................................... 4 2 Test Setup .......................................................................................................................................................................................................................................... 5 3 Antenna Measurements..................................................................................................................................................................................................................... 6 3.1 Return Loss ............................................................................................................................................................................................................................. 7 4 Antenna Radiation Performance ........................................................................................................................................................................................................ 8 4.1.1 2.4GHz Band ......................................................................................................................................................................................................................... 8 4.1.2 5GHz Band ..................................................................................................................................................................................................................... 12 5 Performance Summary .................................................................................................................................................................................................................... 16 6 Appendix .......................................................................................................................................................................................................................................... 17 6.1.1 2.4GHz Software Test Settings ........................................................................................................................................................................................... 17 6.1.2 5GHz Software Test Settings.......................................................................................................................................................................................... 18 7 Additional Information ..................................................................................................................................................................................................................... 19 https://www.ezurio.com/ 4 © Copyright 2024 Ezurio All Rights Reserved DEKA Custom Antenna Datasheet 1 Specifications Ant0 Position (Behind LCD Screen/PCB) Ant1 Position (Behind LCD Screen) Figure 1: Ant0 (WiFi) Position & Ant1 (WiFi/BT) Position ELECTRICAL SPECIFICATIONS Frequency (MHz) 2400-2480 4900-5900 Peak Gain (dBi) Ant0 (+1.63) / Ant1 (-0.33) Ant0 (+2.50) / Ant1 (+5.23) Average Gain (dB) Ant0 (-7) / Ant1(-6) Ant0 (-6) / Ant1(-6.5) VSWR (MHz) 3.0:1 3.0:1 Isolation (dB) – min. 30 Impedance (Ω) 50 Antenna Type PCB Polarization Linear MECHANICAL SPECIFICATIONS Dimensions – mm 38.06 x 17.88 x 1.76 Color PCB (Green) Cable Dia. (mm) 1.37 Connector Mating Height (max) - mm MHF1 (U.FL) 2.5 Cable Type MHF1 to MHF1 Cable Length(s) - mm Ant0 (WiFi) = ~50 Ant1 (WiFi/BT) = ~225 **Note: All electrical specifications are based on the current design of Ant0 and Ant1 antennas, MHF1 connector to MHF1 connector 1.37 dia. Coax cable: 50 and 225mm lengths, and current antenna placement(s). Any variation to the antenna design, cable lengths, antenna placements, or any variations of the actual device itself could cause variations to these antenna specifications.** https://www.ezurio.com/ 5 © Copyright 2024 Ezurio All Rights Reserved DEKA Custom Antenna Datasheet 2 Test Setup Antenna measurements such as VSWR were measured with a Copper Mountain Planar 804/1 vector network analyzer. Active radiation patterns were measured with a Rohde Schwarz NRX power meter and NRP8S power sensors in a Howland Company 3100 chamber equivalent. Phase center is eight inches above the Phi positioner. Figure 2: Antenna Chamber https://www.ezurio.com/ 6 © Copyright 2024 Ezurio All Rights Reserved DEKA Custom Antenna Datasheet 3 Antenna Measurements https://www.ezurio.com/ 7 © Copyright 2024 Ezurio All Rights Reserved DEKA Custom Antenna Datasheet 3.1 Return Loss Figure 3: Return Loss Closed Device (TR1 = Ant1 / TR2 = Ant0) https://www.ezurio.com/ 8 © Copyright 2024 Ezurio All Rights Reserved DEKA Custom Antenna Datasheet 4 Antenna Radiation Performance Figure 4: 2.4GHz Radiation Pattern Setup 4.1.1 2.4GHz Band 4.1.1.1 Azimuthal Conical Cuts at 2412MHz Figure 5: Ant0 (Left) & Ant1 (Right) https://www.ezurio.com/ 9 © Copyright 2024 Ezurio All Rights Reserved DEKA Custom Antenna Datasheet 4.1.1.2 3D Plots at 2412MHz Rotated Around +Z Axis Figure 6: Ant0 2412MHz 3D Plots Rotated Around +Z Axis Figure 7: Ant1 2412MHz 3D Plots https://www.ezurio.com/ 10 © Copyright 2024 Ezurio All Rights Reserved DEKA Custom Antenna Datasheet 4.1.1.3 Azimuthal Conical Cuts at 2437MHz Figure 8: Ant0 (Left) & Ant1 (Right) 4.1.1.4 3D Plots at 2437MHz Rotated Around +Z Axis Figure 9: Ant0 2437MHz 3D Plots Rotated Around +Z Axis Figure 10: Ant1 24…

Text truncated - open the document above for the full version.

A Company: DEKA Research Page 1 of 44 Name: BD Neo Infusion Pump Report: TR3871B Model: BD Neo PCU: 9200 BD Neo Pump Module: 9210 Job: C-3871 Serial: 03010574, 03010575, 03010576, 03010615 Test Report TR3871B Equipment Under Test: BD Neo Infusion Pump Requirement(s): FCC 15.407 Test Date(s): 3/12/2025-4/23/2025 Prepared for: DEKA Research Attn: Jack Murphy 340 Commercial Street Manchester, NH 03101 Report Issued by: Anthony Smith, EMC Engineering Specialist Signature: Date: 11/19/2025 Report Reviewed by: Adam Alger, Sr. Manager, EMC Laboratory Signature: Date: 11/19/2025 Report Constructed by: Anthony Smith, EMC Engineering Specialist Signature: Date: 6/9/2025 This test report may not be reproduced, except in full, without approval of Ezurio Company: DEKA Research Page 2 of 44 Name: BD Neo Infusion Pump Report: TR3871B Model: BD Neo PCU: 9200 BD Neo Pump Module: 9210 Job: C-3871 Serial: 03010574, 03010575, 03010576, 03010615 CONTENTS Contents.................................................................................................................................................. 2 Ezurio Test Services in Review ............................................................................................................. 3 1 Test Report Summary ...................................................................................................................... 4 2 Client Information............................................................................................................................ 5 2.1 Equipment Under Test (EUT) Information ............................................................................... 5 2.2 Product Description ................................................................................................................ 5 2.3 Modifications Incorporated for Compliance ............................................................................ 5 2.4 Deviations and Exclusions from Test Specifications ................................................................. 5 2.5 Channels Tested ..................................................................................................................... 6 2.6 Additional Information ........................................................................................................... 7 2.7 Software Versions ................................................................................................................... 8 2.8 Auxiliary Equipment ................................................................................................................ 8 3 References ....................................................................................................................................... 9 4 Uncertainty Summary .................................................................................................................... 10 5 Test Data ....................................................................................................................................... 11 5.1 Antenna Port Conducted Emissions ...................................................................................... 11 5.2 Radiated Emissions ............................................................................................................... 30 5.3 AC Mains Conducted Emissions............................................................................................. 41 6 Revision History ............................................................................................................................. 44 Company: DEKA Research Page 3 of 44 Name: BD Neo Infusion Pump Report: TR3871B Model: BD Neo PCU: 9200 BD Neo Pump Module: 9210 Job: C-3871 Serial: 03010574, 03010575, 03010576, 03010615 Ezurio Test Services in Review The Ezurio laboratory located at W66 N220 Commerce Court Cedarburg, Wisconsin, 53012 USA is recognized through the following organizations: A2LA – American Association for Laboratory Accreditation Accreditation based on ISO/IEC 17025:2017 with Electrical (EMC) Scope A2LA Certificate Number: 1255.01 Scope of accreditation includes all test methods listed herein unless otherwise noted Federal Communications Commission (FCC) – USA Accredited Test Firm Registration Number: 953492 Recognition of two 3 meter Semi-Anechoic Chambers Innovation, Science and Economic Development Canada Accredited U.S. Identification Number: US0218 Recognition of two 3 meter Semi-Anechoic Chambers Company: DEKA Research Page 4 of 44 Name: BD Neo Infusion Pump Report: TR3871B Model: BD Neo PCU: 9200 BD Neo Pump Module: 9210 Job: C-3871 Serial: 03010574, 03010575, 03010576, 03010615 1 TEST REPORT SUMMARY During 3/12/2025-4/23/2025 the Equipment Under Test (EUT), BD Neo Infusion Pump, as provided by DEKA Research was tested to the following requirements: Operation in the 5.15-5.25, 5.25-5.35, 5.47-5.725, and 5.735-5.835 GHz bands Requirements Description Method Compliant 15.407(b) (1), (2), (3), (4), (9), and (10) 15.209 Spurious Radiated Emissions in Restricted Bands 30-40000 MHz ANSI C63.10 Yes 15.407(a) 26 dB and 99% Occupied Bandwidth ANSI C63.10 Yes 15.407(b)(1)(2)(3)(4) Conducted Out-of-band Emissions ANSI C63.10 Yes 15.407(a)(5) Power Spectral Density ANSI C63.10 Yes 15.407(g) Frequency Stability ANSI C63.10 Reported FCC 15.407(b)(9) AC Mains Conducted Emissions ANSI C63.10 Yes Notice: The results relate only to the item tested as configured and described in this report. Any additional configurations, modes of operation, or modifications made to the equipment under test after the specified test date(s) are at the decision of the client and may not apply to the data seen in this test report. The decision rule for Pass / Fail assessment to the specification or standard listed in this test report has been agreed upon by the client and laboratory to be as follows: Measurement Type Rule Emissions – Amplitude 1 dB below specified limit Emissions – Frequency 1% less than the specifi…

Text truncated - open the document above for the full version.