2ATGY-AWC1068Wireless Charging Stand 127.7kHz

User Manual and Safety Instructions LED Charge Indicator Wireless Pad Features Qi Wireless Surface SAVE THESE INSTRUCTIONS Warranty At Ubio Labs we are dedicated to designing and manufacturing products with superior performance and 100% customer satisfaction. All of our products come with a 1 year limited warranty from date of purchase. www.ubiolabs.com [email protected] 1-866-642-4428 (Monday - Friday 9am - 4pm PST) 2821 Northup Way, Suite 250 Bellevue, WA 98004 DO NOT RETURN TO THE STORE Our customer service team is here to help. WARNING - When using this product, basic precautions should always be followed, including the following: a) Read all manufacturers instructions before using this product. b) To reduce the risk of injury, close supervision is necessary when the product is used near children. c) Do not put ngers or hands into the product. d) Do not expose wireless pad to moisture, rain, or snow. e) Use of a power supply or charger not recommended or sold by wireless pad manufacturer may result in a risk of re or injury to persons. f) Do not use the wireless pad in excess of its output rating. Overloaded outputs above rating may result in a risk of re or injury to persons. Important Safety Instructions NOTE: This equipment has been tested and found to comply with the limits for a wireless power charger, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Model: CHG1151 Input: AC 110-240V, 50-60 Hz Output: 37.5W 15V / 2.5A DC-DC Dimensions: 2.28 x 2.28 x 1.06inches Weight: 4.1 oz. Technical Specifications Wall Adapter Features At Ubio Labs, we are always improving our products’ features and functionality, we reserve the right to change specications at any time without notice. Technical Specifications Model: AWC1068SG Input: 37.5W 15V / 2.5A DC Output: Wireless10W Qi / 7.5W / 5W USB: DC5V 2.4A Compatibility: Apple, Android, other devices with wireless charging Charge Indicator: White/amber LED indicator Dimensions: 2.2 x 2.2 x 4.2 inches W eight: 10 oz. g) Do not disassemble the wireless pad. Take it to a qualied service person when service or repairs are required. Incorrect reassembly may result in a risk of re or injury to persons. h) Do not expose the wireless pad to re or excessive temperature. Exposure to re or temperature above 122°F may cause explosion. The wireless pad’s working temperature is ≤104°F. i) Have service performed by a qualied repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. Wireless Charging Stand DC Power In Your wireless pad is designed to provide optimal power delivery for your wireless device: 10W Qi certified fast charging for Samsung Note9, S9+, S9, Note8, S8+, S8, S7 Edge, S7, S6 Edge, S7, S6 Edge, S6, Note5, LG G6, LGV30, Sony Xperia XZ2 • 7.5W Apple wireless charging for iPhoneX , iPhoneX Max, iPhoneX, iPhone X, iPhone 8, iPhone 8 Plus • 5W charging for other compatible wireless charging devices User Manual AWC1064SG USB Power out Folding Wall Prongs 6 Ft. Cable

UBIO LABS, INC. Agent Authorization Company: UBIO LABS, INC. Address: 2821 Northup Way, Suite 250, Bellevue, WA 98004, USA Product Name: Wireless Charging Stand Model Number(s): AWC1068SG, AWC1068XX (where XX can be any arabian numbers or English letters or blank) Product Description: Wireless Charging Stand 127.7kHz We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020-03-06 Name: Jason Lemenlson Title: President Company: UBIO LABS, INC.

1 Declaration Letter We, SHENZHEN LAN NENG SHI TONG ELECTRONICS CO.,LTD declared that our product Wireless Charging Stand, item No.: AWC1068SG, AWC1068XX (where XX can be any arabian numbers or English letters or blank) are identical inside, the electrical circuit design, layout, components used and internal wiring, with only difference being model name and color. Sincerely yours, Signature: Name/Title: Jason Lemenlson/ President E-Mail: [email protected] Company Name: UBIO LABS, INC. Date：2020-03-06

UBIO LABS, INC. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-03-06 Subject; Request for Confidentiality FCC ID: 2ATGY-AWC1068 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Jason Lemelson Title: President

Report No: CCISE200103201-V01 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2001032 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 23 of 28 8 EUT Constructional Details Report No: CCISE200103201-V01 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2001032 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 24 of 28 Report No: CCISE200103201-V01 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2001032 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 25 of 28

ubiolabs M/N: AWC1068SG | B/N: MMWWYY HJT Input: 15V ⎓ , 2.5A Output (USB-A): 5V ⎓ , 2.4A, 12W | Output (Wireless): 5-10W FCC ID: 2ATGY-AWC1068 | IC: 25088-AWC1068 Designed in Seattle | Made in China This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Report No: CCISE200103201-V01 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2001032 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 26 of 28 Report No: CCISE200103201-V01 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2001032 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 27 of 28 Report No: CCISE200103201-V01 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2001032 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 28 of 28 ------End of report------

Shenzhen ZhongjianNanfang Testing Co., Ltd. Report No: CCISE200103202-V03 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of theCCISproduct certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery orfalsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page RF Exposure Evaluation Report Applicant: UBIO LABS, INC. Address of Applicant: 2821 Northup Way, Suite 250, Bellevue, WA 98004 USA Equipment Under Test (EUT) Product Name: Wireless Charging Stand Model No.: AWC1068SG, AWC1068XX (where XX can be any arabian numbers or English letters or blank) Trade mark: ubiolabs FCC ID: 2ATGY-AWC1068 Applicable standards: FCC CFR Title 47 Part 2 Subpart J Section 2.1091 Date of sample receipt: 10 Jan., 2020 Date of Test: 10 Jan., to 10 Mar., 2020 Date of report issue: 13 Mar., 2020 Test Result: PASS* Report No: CCISE200103202-V03 Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.: CCISE2001032 Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 9 2 Version Version No. Date Description 00 03 Mar., 2020 Original 01 10 Mar., 2020 1. Updated modulation technology on page 4. 2. Updated test data on page 7. 02 13 Mar., 2020 1. Added describe the EUT how to compliance the requirement of KDB 680106 D01 Section 5(b) on page 7. 2. Updated test data on page 7. 03 13 Mar., 2020 1. Updated Note 1/2 on page 7. Tested By: Date: 13 Mar., 2020 Test Engineer Reviewed By: Date: 13 Mar., 2020 Project Engineer Report No: CCISE200103202-V03 Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.: CCISE2001032 Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 9 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 GENERAL INFORMATION .................................................................................................................................. 4 CLIENT INFORMATION .......................................................................................................................................................... 4 GENERAL DESCRIPTION OF E.U.T. ..................................................................................................................................... 4 OPERATING MODES ............................................................................................................................................................. 4 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................................... 4 MEASUREMENT UNCERTAINTY ............................................................................................................................................ 4 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD .................................................................................... 4 LABORATORY FACILITY ....................................................................................................................................................... 5 LABORATORY LOCATION..................................................................................................................................................... 5 TEST INSTRUMENTS LIST ..................................................................................................................................................... 5 5 TECHNICAL REQUIREMENTS SPECIFICATION IN FCC CFR TITLE 47 PART 2.1091 ............................ 6 LIMITS .................................................................................................................................................................................. 6 TEST SETUP BLOCK ............................................................................................................................................................ 6 LIMITS FORGENERAL POPULATION/UNCONTROLLED EXPOSURE ..................................................................................... 6 TEST PROCEDURE ............................................................................................................................................................... 7 RESULT ................................................................................................................................................................................ 7 6 TEST SETUP PHOTOS： .................................................................................................................................... 8 7 EUT PHOTOS：...............................................................................…

Text truncated - open the document above for the full version.

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE200103201-V02 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC REPORT Applicant: UBIO LABS, INC. Address of Applicant: 2821 Northup Way, Suite 250, Bellevue, WA 98004 USA Equipment Under Test (EUT) Product Name: Wireless Charging Stand Model No.: AWC1068SG, AWC1068XX (where XX can be any arabian numbers or English letters or blank) Trade mark: ubiolabs FCC ID: 2ATGY-AWC1068 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.209 Date of sample receipt: 10 Jan., 2020 Date of Test: 10 Jan., to 02 Mar., 2020 Date of report issue: 12 Mar., 2020 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No: CCISE200103201-V02 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2001032 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 28 2 Version Version No. Date Description 00 03 Mar., 2020 Original 01 09 Mar., 2020 1. Updated modulation type on page 5. 2. Updated test method on P9, P16, P19. 3. Updated test requirement on page 16. 02 12 Mar., 2020 1. Updated test limit on page 12/13. Prepared By: Date: 12 Mar., 2020 Report Clerk Check By: Date: 12 Mar., 2020 Project Engineer Report No: CCISE200103201-V02 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2001032 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 28 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 TEST SUMMARY .................................................................................................................................................. 4 5 GENERAL INFORMATION .................................................................................................................................. 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 5 5.3 TEST MODE ............................................................................................................................................................ 5 5.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 5 5.5 MEASUREMENT UNCERTAINTY .............................................................................................................................. 6 5.6 DESCRIPTION OF CABLE USED ............................................................................................................................. 6 5.7 LABORATORY FACILITY .......................................................................................................................................... 6 5.8 LABORATORY LOCATION ....................................................................................................................................... 6 5.9 TEST INSTRUMENTSLIST ........................................................................................................................................ 7 6 TEST RESULTS AND MEASUREMENT DATA ................................................................................................ 8 6.1 ANTENNA REQUIREMENT ....................................................................................................................................... 8 6.2 RADIATED EMISSION ............................................................................................................................................. 9 6.3 CONDUCTED EMISSION ....................................................................................................................................... 16 6.4 BANDWIDTH ......................................................................................................................................................... 19 7 TEST SETUP PHOTOS...................................................................................................................................... 21 8 EUT CONSTRUCTIONAL DETAILS ..............…

Text truncated - open the document above for the full version.

Report No: CCISE200103202-V01 Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.: CCISE2001032 Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 8 of 9 6 Test Setup Photos： Report No: CCISE200103202-V01 Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.: CCISE2001032 Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 9 of 9 7 EUT Photos： ------End of report------

Report No: CCISE200103201-V01 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2001032 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 21 of 28 7 Test Setup Photos Radiated Emission(9kHz-30MHz) Radiated Emission(30MHz-1000MHz) Report No: CCISE200103201-V01 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2001032 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 22 of 28 Conducted Emission