2ATGY-PWB1114Wireless Power Bank

Power Bank SAVE THESE INSTRUCTIONS Warranty At Ubio Labs, we are dedicated to designing and manufacturing products with superior performance and 100% customer satisfaction. All of our products come with a 1 year limited warranty from date of purchase. We are always improving our products’ features and functionality. We reserve the right to change product specifications at any time without notice. www.ubiolabs.com [email protected] 1-866-642-4428 (Monday - Friday 9am - 4:30pm PST) 2821 Northup Way, Suite 250 Bellevue, WA 98004 DO NOT RETURN TO THE STORE Our customer service team is here to help. Model: PWB1114SG Technical Specifications iPhone, Apple Watch, and AirPods are trademarks of Apple Inc., registered in the U.S. and other countries. Component: PWB1114 Input 1: Lightning Input 9W 5V / 1.8A Input 2: USB-C Input 12W 5V/2.4A Output 1: Qi (7.5W / 5W) Output 2: Apple Watch Magnetic Charging Module Output 3: USB-C Output 15W 5V/3A Charge Indicator: White/amber LED indicator* Dimensions: 5.57 x 2.74 x 0.49 inches Weight: 6.17 oz. Your wireless power bank is designed to provide optimal power delivery for your wireless device: • 7.5W wireless charging for iPhone 8 or later • 5W wireless charging for Wireless Charging Case for AirPods® and other compatible devices • All Apple Watch Models * A blinking amber LED indicates a foreign object has been detected (metal objects like keys, coins, magnets, etc.) and the device is automatically turned o to ensure safety. Removal of foreign object and proper alignment of phone will result in normal operation. 1 ) Apple Watch Magnetic Charging Module 2 ) Qi Wireless Surface 3 ) Lightning Input 4 ) USB-C Input/Outputs 5 ) Battery Level Indicator 6 ) Wireless Charge Indicator IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY 1 2 3 6 5 Features User Manual and Safety Instructions Wireless Power Bank 8,000mAh Portable Important Safety Instructions Before First Use Sleep Mode / Shake to Wake Power bank goes into sleep mode after 30 seconds when not in use. Shake to wake the power bank before charging your devices. Connect power bank into a wall charger to activate. The battery LEDs will light up. WARNING - When using this product, basic precautions should always be followed, including the following: a) Read all the instructions before using the product. b) To reduce the risk of injury, close supervision is necessary when the product is used near children. c) Do not put fingers or hands into the product. d) Do not expose power bank to rain or snow. e) Use of a power supply or charger not recommended or sold by power bank manufacturer may result in a risk of fire or injury to persons. f ) Do not use power bank in excess of its output rating. Overloaded outputs above rating may result in a risk of fire or injury to persons. g) Do not use a power bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. h) Do not disassemble the power bank. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons. i) Do not expose the power bank to fire or excessive temperature. Exposure to fire or temperature above 100°C may cause explosion. The temperature of 100°C can be replaced by the temperature of 212°F. j) Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. k) Switch off the power bank when not in use. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may n ot cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason able protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45°C or Incinerate. Follow Manufacturer’s Instructions. 4 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement The device has been evaluated to meet general RF exposure requirement. To maintain compliance wi…

Text truncated - open the document above for the full version.

Ubio Labs, Inc. Address: 2821 Northup Way, Suite 250，Bellevue，Washington，United States，98004 USA Tel.: 425-591-9529 Fax: 425-329-6262 E-mail: [email protected] Product Similarity Declaration 2020-03-09 To: FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Ubio Labs, Inc. hereby declare that we have a product named as Wireless Power Bank (Model: PWB1114SG, FCC ID: 2ATGY-PWB1114) was tested by BACL, Meanwhile, for our marketing purpose, we would like to list series model (PWB1114AW, PWB1114XX) (XX would be any Arabian number or English letter or blank)) on reports and certificate. They have the same circuit the only difference is model and color. We confirm that all information above is true, and we’ll be responsible for all the consequences. Please contact me if you have any question. Sincerely Yours, Signature: Name： Jason Lemenlson Tittle： President

Ubio Labs, Inc. Address: 2821 Northup Way, Suite 250，Bellevue，Washington，United States，98004 USA Tel.: 425-591-9529 Fax: 425-329-6262 E-mail: [email protected] QA-FR-170-B FCC Authorization Date: 2020-04-21 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Ubio Labs, Inc. hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, Ubio Labs, Inc. the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature Name： Jason Lemenlson Tittle： Manager

Ubio Labs, Inc. Address: 2821 Northup Way, Suite 250，Bellevue，Washington，United States，98004 USA Tel.: 425-591-9529 Fax: 425-329-6262 E-mail: [email protected] FCC Confidential Authorization Date: 2020-04-21 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2ATGY- PWB1114 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Ubio Labs, Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Name： Jason Lemenlson Tittle： Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Antenna Antenna

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RGMA200323004-00 FCC Part 15C Page 10 of 32 FCC §1.1310, §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standard According to subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According with KDB 680106 D01 RF Exposure Wireless Charging Apps v03 clause 3 c) According to KDB 680106 D01 RF Exposure Wireless Charging App v03 clause 5 b) Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RGMA200323004-00 FCC Part 15C Page 11 of 32 Block Diagram of Test Setup Note: 20 cm for Top test. Test Data Environmental Conditions Temperature:25C Relative Humidity: 65 % ATM Pressure: 101.0 kPa The testing was performed by Black Chen on 2020-03-31. Test mode: Transmitting & Charging (full load) Type C Terminal Charging was the worst case: 15cm Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RGMA200323004-00 FCC Part 15C Page 12 of 32 H-Filed Strength Frequency Range (kHz) Position A (A/m) Position B (A/m) Position C (A/m) Position D (A/m) Position E (A/m) 50% Limit (A/m) Limit Te s t (A/m) 110-205 0.586 0.618 0.586 0.586 0.618 0.815 1.63 E-Filed Strength Frequency Range (kHz) Position A (V/m) Position B (V/m) Position C (V/m) Position D (V/m) Position E (V/m) 50% Limit (V/m) Limit Te s t (V/m) 110-205 1.547 1.486 1.528 1.664 1.425 307 614 Note: Test with 15cm distance from the center of the probe(s) to the edge of the device, 20cm for the top test. Result: Compliance Considerations of compliance 680106 D01 RF Exposure Wireless Charging App v03 clause 5 b: (1) Power transfer frequency is less than 1 MHz. Yes, the operation frequency is 110-205 kHz. (2) Output power from each primary coil is less than or equal to 15 watts. Yes, the maximum output power of primary coil is 7.5Watts, less than 15 watts. (3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. (4) Client device is placed directly in contact with the transmitter. Yes, client device is placed directly in contact with the transmitter (5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Yes, mobile exposure conditions only (6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yes, the test result for H and E-filed strength less than 50% of the MPE limit. ① ② ① Wireless charging area for mobile phone which include one coil. ② Wireless charging coil for apple watch which include one coil. Note: The two wireless charging areas are independent. The coils and clients are able to detect and coupling only between individual pairs of coils.

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. FCC PART 15C TEST REPORT For Ubio Labs, Inc. 2821 Northup Way, Suite 250, Bellevue, WA 98004, USA FCC ID: 2ATGY-PWB1114 Report Type: Original Report Product Type: Wireless Power Bank Re port Number: RGMA200323004-00 Re port Date: 2020-04-29 Reviewed B y: Jimmy Xiao RF En gineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RGMA200323004-00 FCC Part 15C Page 2 of 32 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 3 TEST METHODOLOGY .................................................................................................................................................. 3 MEASUREMENT UNCERTAINTY .................................................................................................................................... 4 TEST FACILITY ............................................................................................................................................................. 4 SYSTEM TEST CONFIGURATION .......................................................................................................................... 5 JUSTIFICATION ............................................................................................................................................................. 5 EUT EXERCISE SOFTWARE .......................................................................................................................................... 5 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 5 EXTERNAL I/O CABLE .................................................................................................................................................. 5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 6 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 TEST EQUIPMENT LIST ........................................................................................................................................... 9 FCC §1.1310, §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ........................................................... 10 APPLICABLE STANDARD ............................................................................................................................................ 10 BLOCK DIAGRAM OF TEST SETUP .............................................................................................................................. 11 TEST DATA ................................................................................................................................................................ 11 FCC§15.203 – ANTENNA REQUIREMENT ........................................................................................................... 13 APPLICABLE STANDARD ............................................................................................................................................ 13 ANTENNA CONNECTED CONSTRUCTION .................................................................................................................... 13 FCC §15.207 – AC LINE CONDUCTED EMISSION ............................................................................................. 14 APPLICABLE STANDARD ............................................................................................................................................ 14 EUT SETUP ................................................................................................................................................................ 14 EMI TEST RECEIVER SETUP ....................................................................................................................................... 14 TEST PROCEDURE ...................................................................................................................................................... 14 CORRECTED FACTOR & MARGIN CALCULATION ....................................................................................................... 15 TEST RESULTS SUMMARY .......................................................................................................................................... 15 TEST DATA ....…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Apple terminal charging Conducted Emissions - Front View Conducted Emissions - Side View Radiated Emissions View (9 kHz ~ 30 MHz) Radiated Emissions View (30 MHz ~ 1 GHz) Type C Terminal Charging Conducted Emissions - Front View Conducted Emissions - Side View Radiated Emissions View (9 kHz ~ 30 MHz) Radiated Emissions View (30 MHz ~ 1 GHz) Wireless Charging & charging for mobile phone with USB cable Conducted Emissions - Front View Conducted Emissions - Side View Radiated Emissions View (9 kHz ~ 30 MHz) Radiated Emissions View (30 MHz ~ 1 GHz) H-Filed Strength View E-Filed Strength View