2ATH6-AVG30WF6AltumView Sentinare 3 Smart Activity Sensor

Sentinare 3 Smart Activity Sensor Quick Start Guide Thank you for choosing AltumView Sentinare 3 smart activity sensor! The following is a list of the main steps to use the sensor. Detailed user manual and help information can be found at https://altumview.ca/support/ 1: In the Box • Sentinare 3 smart activity sensor x 1 • Power adapter x 1 • USB cable x 1 • Mounting bracket x 1 2: Download the Sentinare Activity Sensor App on Apple App Store or Google Play. 3: Install the Sensor Install the sensor at about 1.8-2.5 meters from the ground and tilt it down slightly so that it can monitor most of the room and the floor. The bracket can be mounted on a horizontal surface, on the wall, or on the ceiling. The sensor can be installed with the USB port in the bottom or on the top. In the latter case, you need to turn on the Upside-Down Installation flag in the App. More details can be found from our website. 4: Create an Account Create a new account from the Sentinare Activity Sensor App. Choose the server that is closest to your country. Each sensor is only pre-registered in the white list of one server. 5: Add the Sensor to the Account Go to the Rooms page in the App, and add your sensor to the account. Follow the instruction to set up WiFi, and upgrade the firmware if necessary. 6: Calibrate the Sensor After adding the sensor, the App will guide you to calibrate the floor so that fall detection can work properly. 7: Add People Go to the People page to add people to the account, including each person’s face photos, to enable face recognition. The sensor is now ready to look after your loved ones! FCC Compliance Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. I SED Compliance Statements This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. Haut - parleurs et subwoofer doit être installé et utilisé avec une distance minimale de 20cm entre le radiateur et votre corps. Contact Us https://www.altumview.ca [email protected] 火柴人传感器快速使用指南 （简体中文） 欢迎使用奥瞳火柴人传感器！使用传感器的主要步骤如下。详细说明书和帮助信息请访问我们的网址： https://altumview.ca/support/ 1: 装箱清单 • 火柴人传感器x 1 • 电源适配器 x 1 • USB 线 x 1 • 支架 x 1 2: 下载 Sentinare Activity Sensor APP： 3: 安装传感器 建议将火柴人传感器安装在1.8-2.5米左右的高度，并适当向下倾斜，以便能检测到房间的大部分地面。支 架可安装在水平面、侧墙、或天花板。传感器可正常安装（USB电源在后下方）或倒置安装（USB电源在 后上方）。倒置安装时需要在App里打开倒置安装的设置。详细信息请访问我们的网址。 4: 创建账户 在火柴人传感器App里创建账户。请选择离您最近的服务器。每个传感器已经预先登记在一个服务器的白 名单上。 5: 添加传感器到账户 在火柴人传感器APP里的房间页面，可以添加传感器，然后根据提示设置WiFi。如果有新的固件，App会 提示升级固件。 6: 地板标定 首次添加传感器后，App会引导您进行地板标定，之后传感器才能进行跌倒检测。 7: 添加人员 在火柴人传感器APP的人员页面，可以添加人员信息，包括人脸照片，以便使用人脸识别功能。 经过这些基本步骤，传感器就可以使用了。 联系我们 https://www.altumview.ca [email protected] 火柴人傳感器快速使用指南 （繁體中文） 歡迎使用奧瞳火柴人傳感器！使用傳感器的主要步驟如下。詳細說明書和幫助信息請訪問我們的網址： https://altumview.ca/support/ 1: 裝箱清單 • 火柴人傳感器x 1 • 電源適配器 x 1 • USB 線 x 1 • 支架 x 1 2: 下載 Sentinare Activity Sensor APP： 3: 安裝傳感器 建議將火柴人傳感器安裝在1.8-2.5米左右的高度，並適當向下傾斜，以便能檢測到房間的大部分地面。支 架可安裝在水平面、側牆、或天花板。傳感器可正常安裝（USB電源在後下方）或倒置安裝（USB電源在 後上方）。倒置安裝時需要在App裡打開倒置安裝的設置。詳細信息請訪問我們的網址。 4: 創建賬戶 在火柴人傳感器App裡創建賬戶。請選擇離您最近的服務器。每個傳感器已經預先登記在一個服務器的白 名單上。 5: 添加傳感器到賬戶 在火柴人傳感器APP裡的房間頁面，可以添加傳感器，然後根據提示設置WiFi。如果有新的固件，App會 提示升級固件。 6: 地板標定 首次添加傳感器後，App會引導您進行地…

Text truncated - open the document above for the full version.

A ltumView Systems Inc. Dat e: 11/14/2022 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Regarding: FCC ID: 2ATH6-AVG30WF6 To whom it may concern: We, the undersigned, hereby authorize Compliance Certification Services (Kunshan) Inc to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with AltumView Systems Inc. This authorization is valid until further written notice from the applicant. Print Name: Jie Liang Title: President Signature: On behalf of Company: AltumView Systems Inc. Telephone: 1-604-248-8428 E-mail: [email protected]

Altum View Systems Inc. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID: 2ATH6-AVG30WF6 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Print Name: Jie Liang Title: President Signature: On behalf of Company: AltumView Systems Inc. Telephone: 1-604-248-8428 E-mail: [email protected]

Ap plicant Declaration Applic ant Declaration Rev:0.0 SGS No rth America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applic ant Legal Business Name AltumView Systems Inc. Addre ss #118-2323 Boundary Road Vancouver V5M4V8 Canada Gran tee Code 2ATH6 FCC ID 2ATH6-AVG30WF6 Authorized Contact Name Jie Lian g Co ntact Email [email protected] Con tact Phone 1-604-248-842 8 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belie f. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in t his application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensur e that pro duction units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsibl e pa rty and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Sec tion 53 01 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions . Lin k to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RS P-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Appl icant Signature: Date: 11/ 14/2022 Print Name: Jie Lian g Title: President *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Al tumView Systems Inc. W e, AltumView Systems Inc. declare that this EUT (FCC ID: 2ATH6-AVG30WF6, IC: 2509 5-AVG30WF6) does not have ad Hoc Mode function on “US/Canada frequencies“. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/ Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Print Name: Jie Liang Title: President Signature: On behalf of Company: AltumView Systems Inc. Telephone: 1-604-248-8428 E-mail: [email protected]

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 1 of 8 Appendix External Photos for FYCR2211000448AT FCC ID: 2ATH6-AVG30WF6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 2 of 8 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 3 of 8 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 4 of 8 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 5 of 8 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 6 of 8 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 7 of 8 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 8 of 8 - End of the Appendix -

Higher than Main Label Main Label

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 1 of 7 Appendix Internal Photos for FYCR2211000448AT FCC ID: 2ATH6-AVG30WF6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 2 of 7 EUT Constructional Details (EUT Photos) Antenna Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 3 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 4 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 5 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 6 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 7 of 7 - End of the Appendix -

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221100044803 Page: 1 of 12 Winkey Wang EMC Technical Manager RF EXPOSURE EVALUATION REPORT Application No.: FYCR2211000448AT Applicant: AltumView Systems Inc. Address of Applicant: #118-2323 Boundary Road Vancouver BC V5M4V8 Canada Manufacturer: Shenzhen Wabony Electronic Co.,Ltd. Address of Manufacturer: Building 12#, An Tuo Shan High Tech Park, Xin Sha Road, Sha Er Community, Sha Jing Town, Bao An District, Shenzhen, P.R.C. Factory: Shenzhen Wabony Electronic Co.,Ltd. Address of Factory: Building 12#, An Tuo Shan High Tech Park, Xin Sha Road, Sha Er Community, Sha Jing Town, Bao An District, Shenzhen, P.R.C. Equipment Under Test (EUT): EUT Name: AltumView Sentinare 3 Smart Activity Sensor Model No.: AV-G3-0WF6 Trade Mark: FCC ID: 2ATH6-AVG30WF6 Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2022-11-09 Date of Evaluation: 2022-11-23 to 2022-12-25 Date of Issue: 2022-12-29 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221100044803 Page: 2 of 12 Revision Record Version Chapter Date Modifier Remark 01 2022-12-29 Original Authorized for issue by: Tree Zhan/Project Engineer Winkey Wang/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221100044803 Page: 3 of 12 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 5 3.4 Test Location ...................................................................................................................................... 6 3.5 Test Facility ........................................................................................................................................ 6 3.6 Deviation from Standards ................................................................................................................... 6 3.7 Abnormalities from Standard Conditions ........................................................................................... 6 3.8 Blanket 1 mW Blanket Exemption ...................................................................................................... 7 3.9 MPE-based Exemption ...................................................................................................................... 7 3.10 SAR-based Exemption ....................................................................................................................... 8 4 Measurement and Calculation ............................................................................................................... 11 4.1 Maximum transmit power ................................................................................................................. 11 4.2 RF Exposure Calculation ................................................................................................................. 12 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221100044803 Page: 4 of 12 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power Supply: AC/DC adapter： Model: HJ-0502000W2-CCC Input: 100-240V 50/60Hz 0.3A Output: 5V/2000mA Cable(s): USB A to C cable 153cm unshielded For BLE: Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V4.2 LE Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: FPC Antenna Antenna Gain: 2.63dBi For 2.4G WIFI: Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK);802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels: 802.11b/g/n(HT20):11 Channel Spacing: 5MHz Antenna Type: FPC Antenna Antenna Gain: 2.63dBi Remark: The information in this section is provided by the applicant or manufacturer, CCS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221100044803 Page: 5 of 12 3.3 Separation Distance Minimum test separation distance: 20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221100044803 Page: 6 of 12 3.4 Test Location All tests were performed at: Compliance Certification Services（Kunshan）Inc. Shenzhen branch. Fuyong lab. Xinlong TechnoPark,Fengtang Road, Fuyong Subdistrict, Bao’an, Shenzhen, China Tel: +86 755 8866 3988 Fax: +86 755 2671 0594 No tests were sub-con…

Text truncated - open the document above for the full version.

ConfidentialInformationVersion1.00 第 1 页 / 共计 10 页 ShenzhenHaoTianChengWireless TechnologyCO.Ltd Name：SampleApproval Ver：V1.0 date：2022.12.28 SampleApprovalSheet ProjectName ： H07A-2.0 SampleName ： WIFI/BTantenna SampleSPEC：FPCAntenna+CABLE(L:86.00mm) CustomerPN. ： TransferDate ： 2022.12.28 SupplierConfirm Project Engineer Quality xiaoqiang Michaelgushuang date 2022.12.282022.12.282022.12.28 Customer confirm PMElectronMDPDQE date conclusion□MP□Limitsuse （） K □ROHS Suppliername:ShenzhenHaoTianChengWirelessTechnologyCO.Ltd TheSupplieraddress:ShenZhenbaoandistrictleavefairytwolaneallthewaybest scienceandtechnologyparkbuildingL/5E E-mail:[email protected] ： 13923736137 ConfidentialInformationVersion1.00 第 2 页 / 共计 10 页 CATALOG 1.Specificationoverview............................................................................................................3 2.Appearance..............................................................................................................................3 3.Electricalproperties...............................................................................................................3 3.1Antennafrequencyband...............................................................................................3 3.2Matchingcircuit..............................................................................................................3 3.3Impedancerequirements...............................................................................................4 3.4WIFI/BTpassivestandingwavediagram...................................................................4 3.5WIFI/BTPassiveSmithChart......................................................................................4 3.6Passiveefficiencygains..................................................................................................5 3.7WIFI/BTPassiveSmithChartWIFIAntennaTestData........................................5 3.8Environmentaltreatment.............................................................................................6 4.Appearancestructure.............................................................................................................6 4.1Antennamaterial............................................................................................................6 4.2Structuraldrawings....................................................................................................7 5.Listofrawmaterials（BOM）.............................................................................................8 6.Productionflowchart............................................................................................................8 7.Reliabilitytestreport.............................................................................................................9 8.GPtestreportofantennaandaccessorymaterials（ROHS.SGS.MSDS）：............9 9.Packingmethod....................................................................................................................10 ConfidentialInformationVersion1.00 第 3 页 / 共计 10 页 1.Specificationoverview Thisspecificationdescribestheconditionofbuilt-inwifi/btantennaofHuaBaoLi_H07A-2.0. ItisfrequencybandWiFiismanufacturedby ShenzhenHaoTianChengWirelessTechnologyCO.Ltd 。 2.Appearance 3.Electricalproperties 3.1.Antennafrequencyband WIFI/BT Emission spectrum(MHz) 2400~2500 Receiving frequency band(MHz) 2400~2500 3.2.Matchingcircuit Matchingcircuitnotchanged ConfidentialInformationVersion1.00 第 4 页 / 共计 10 页 3.3Impedancerequirements 50ohm 3.4WIFI/BTpassivestandingwavediagram: 3.5WIFI/BTPassiveSmithChart: ConfidentialInformationVersion1.00 第 5 页 / 共计 10 页 3.6Passiveefficiencygains 3.7WIFI/BTPassiveSmithChartWIFIAntennaTestData: ConfidentialInformationVersion1.00 第 6 页 / 共计 10 页 3.8Environmentaltreatment 4Appearancestructure 4.1Antennamaterial Antennamaterial:FPCantenna,blackink,goldplatingonexposedcopperarea. Substrate+doublesidedadhesivetape+releasepaper Cableline:thetabaldistanceof86.00mm,wirediameter1.13mm,teflonmaterial. ConfidentialInformationVersion1.00 第 7 页 / 共计 10 页 4.2Structuraldrawings ConfidentialInformationVersion1.00 第 8 页 / 共计 10 页 5.Listofrawmaterials（BOM） 6.Productionflowchart ConfidentialInformationVersion1.00 第 9 页 / 共计 10 页 7.Reliabilitytestreport 8.GPtestreportofantennaandaccessorymaterials（ROHS.SGS.MSDS）： Someinformationofantenna: Duetothelargenumberofpages,theaboveRoHS.SGS.MSDSdatawillbeprovidedin electronicform. ConfidentialInformationVersion1.00 第 10 页 / 共计 10 页 CABLE: 9.Packingmethod FPC+CableantennasinglePCSshipment,about100PCS,asmallbagintoalargebagagain,thelastis putintoasmallcarton,asmallboxofabout3000PCSantenna.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221100044802 Page: 1 of 100 Winkey Wang EMC Technical Manager TEST REPORT Application No.: FYCR2211000448AT Applicant: AltumView Systems Inc. Address of Applicant: #118-2323 Boundary Road Vancouver BC V5M4V8 Canada Manufacturer: Shenzhen Wabony Electronic Co.,Ltd. Address of Manufacturer: Building 12#, An Tuo Shan High Tech Park, Xin Sha Road, Sha Er Community, Sha Jing Town, Bao An District, Shenzhen, P.R.C. Factory: Shenzhen Wabony Electronic Co.,Ltd. Address of Factory: Building 12#, An Tuo Shan High Tech Park, Xin Sha Road, Sha Er Community, Sha Jing Town, Bao An District, Shenzhen, P.R.C. Equipment Under Test (EUT): EUT Name: AltumView Sentinare 3 Smart Activity Sensor Model No.: AV-G3-0WF6 Trade Mark: FCC ID: 2ATH6-AVG30WF6 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-11-09 Date of Test: 2022-11-23 to 2022-12-25 Date of Issue: 2022-12-29 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221100044802 Page: 2 of 100 Revision Record Version Chapter Date Modifier Remark 01 2022-12-29 Original Authorized for issue by: Tree Zhan/Project Engineer Winkey Wang/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221100044802 Page: 3 of 100 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221100044802 Page: 4 of 100 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY .............................................................................................................. 6 4.4 TEST LOCATION .................................................................................................................................... 7 4.5 TEST FACILITY ...................................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ............................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 7 5 EQUIPMENT LIST ...................................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 11 6.1 ANTENNA REQUIREMENT .................................................................................................................... 11 6.1.1 Test Requirement: ....................................................................................................................... 11 6.1.2 Conclusion ................................................................................................................................... 11 7 RADIO SPECTRUM MATTER TEST RESULTS ..............................................................................…

Text truncated - open the document above for the full version.