2ATI6JG2020A27A27Toy RC Monster Spinning Car

Jinxi County Jingang Industrial Co., Ltd.

Click to zoom

Application Details

Equipment Class: DXX - Part 15 Low Power Communication Device Transmitter
Date of Grant: Jun 16, 2020
Application Purpose: Original Equipment
Date of Application: Jun 16, 2020
Equipment Note: Toy RC Monster Spinning Car
Frequency Range: 27.14500000 - 27.14500000
Company: Jinxi County Jingang Industrial Co., Ltd.
Country: China

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

The artwork and design of this manual are protected by US copyright law and may not be reproduced, distributed, displaced, published or used for any purpose without prior written permission. Altering, removing or reproducing any of the trademark or copyright notices on this package is not permitted. ©2019 MerchSource, LLC. Irvine, CA 92618. All rights reserved. RC THUNDER TUMBLER®/TWIRLING TUMBLER™ OPERATING INSTRUCTIONS Locate the battery compartment on the back of each item. Swivel latches on bottom of car to release battery pack and insert batteries. Insert 4 “AA” 1.5V alkaline batteries (not included) for car and one 9V battery (not included) for remote control. iiiiii Switch both car and remote buttons to “ON” position. For best result use the car on hard surfaces such as wood or tile. iiiiii Carefully remove items from package. BATTERY WARNING: • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. • Insert batteries using the correct polarity. Do not short-circuit the supply terminal. • Remove batteries when not in use. Recycle or dispose of exhausted batteries according to federal, state, and local laws. Do not dispose of batteries in a fire - they may leak or explode. • Only use manufacture specified battery(ies), charger(s) and/or adapter, if applicable, specified by the manufacturer. • Always use, replace, and recharge (if applicable) batteries under adult supervision. • Keep these instructions for future reference. • Do not operate during thunderstorms or rain. • Avoid water, sand and snow when operating car. • Do not submerge car or controller in water. • Never operate your car on the street or highway. • Never operate your car in a confined or crowded area, and do not use people or animals as obstacles. • Do not run your car into furniture, objects or hard surface, as this will cause damage to both the objects and your car. • Keep fingers, hair and loose clothing away from the tires. gears and motor while the car is switched to “ON”. • Do not leave car or remote control near source of heat or under direct sunlight for long periods of time. • Do not leave car or remote control outside overnight. Dampness is harmful to interior components. • Remove all batteries when not in use to avoid accidental operation • Adult supervision is recommended when operating this car. Reverse Forward Spinning Action Action Button Hold Action Button While Spinning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: KEEP THIS INSTRUCTION MANUAL AS IT CONTAINS IMPORTANT INFORMATION FOR FUTURE REFERENCE. Due to continuous product improvements, the pictures on this manual may dier slightly from the actual product. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAFETY PRECAUTIONS 1-800-374-2744 FOR TECHNICAL SUPPORT, PLEASE CALL 6+ Battery Cover On/O Switch On/O Switch Printed in China

Cover Letter(s)

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0 Jinxi County Jingang Industrial Co., Ltd. 2020.6.3 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ Jinxi County Jingang Industrial Co., Ltd.____ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: 2ATI6JG2020A27 Product Description: Toy RC Monster Spinning Car Model: JG2020A, 1012639 Sincerely, Client’s signature Client’s name:Chupo Lai Title :CEO Contact information / address : Jinxi County Industrial Park Zone C, Fuzhou City, Jiangxi, China.

Cover Letter(s)

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 6.0 Jinxi County Jingang Industrial Co., Ltd. 2020.6.3 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2ATI6JG2020A27 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name:Chupo Lai Title :CEO Contact information / address : Jinxi County Industrial Park Zone C, Fuzhou City, Jiangxi, China.

Cover Letter(s)

Jinxi County Jingang Industrial Co., Ltd. Declaration of Identical Product Hereby, Name of manufacturer: Jinxi County Jingang Industrial Co., Ltd. Address: Jinxi County Industrial Park Zone C, Fuzhou City, Jiangxi, China. City: Fuzhou Country: China declares that: Product description: Toy RC Monster Spinning Car Type designation(s): 1012639 Trademark: Blue Hat /Sharper Image Family name is technically identical to: Product description: Toy RC Monster Spinning Car Type designation: JG2020A Trademark: Blue Hat /Sharper Image Certificate number (if applicable) They are identical with the test model JG2020A except the color of the appearance, trade name and model name for trading purpose. Date: 2020.6.3 City: Fuzhou Name: Chupo Lai Signature

Cover Letter(s)

Declaration on model difference 产品差异声明 We the undersigned hereby confirm that any of our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; the only differences are the appearance 、trade name and model no. for trading purpose. 我们在下面签名并据此确认:以下产品型号之间的差异仅为外观、商标及型号不同，其它设计完全相同。 The above appearance is for color and silk-screen only. 上述所说外观仅指产品的颜色及丝印. We hereby confirm that we accept the inconformity of product name between FCC report/certificate and instruction manual, and be responsible for any consequence that may arise. 我们在此确认 : 我们同意报告 / 证书和说明书上的产品名称不一致，并原意承提由此导致的任何后果。 Production name 产品名称 Trade name 商标 Model no. 型号 Toy RC Monster Spinning Car Blue Hat / Sharper Image Please provide at least 1 sample with difference except specified as above for further evaluation. 如有以下所述差异，需提供1个样板做进一步评估。 Production name 产品名称 Trade name 商标 Model no. 型号 Description 差异描述 Confirmed by Authorized Signature: 赖楚坡授权人签字 Company Stamp : Date: 2020-5-12 公司盖章日期 JG2020A, 1012639

External Photos

ID Label/Location Info

JG2020A -27MHz FCC ID label FCC ID：2ATI6JG2020A27 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 40mm 19mm

Internal Photos

Test Report

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 20 Report Version 1 Test Report No.:RF200401N008 TEST REPORT Applicant Jinxi County Jingang Industrial Co., Ltd. Address Jinxi County Industrial Park Zone C, Fuzhou City, Jiangxi, China. Manufacturer or Supplier ID Jinxi County Jingang Industrial Co., Ltd. Address Jinxi County Industrial Park Zone C, Fuzhou City, Jiangxi, China. Product Toy RC Monster Spinning Car Brand Name Blue Hat / Sharper Image Model JG2020A Additional Model & Model Difference: 1012639 Date of tests Apr. 02 to May 09, 2020 the tests have been carried out according to the requirements of the following standards: FCC Part 15, Subpart C, Section 15.227 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Evans He Project Engineer / EMC Department Approved by David Huang Supervisor / EMC Department Date: May 13, 2020 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 20 Report Version 1 Test Report No.:RF200401N008 TABLE OF CONTENTS RELEASE CONTROL RECORD ........................................................................................................3 1 SUMMARY OF TEST RESULTS ..................................................................................................4 2 MEASUREMENT UNCERTAINTY ................................................................................................4 3 GENERAL INFORMATION ..........................................................................................................5 3.1 GENERAL DESCRIPTION OF EUT ......................................................................................... 5 3.2 DESCRIPTION OF TEST MODES ........................................................................................... 6 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 6 3.4 DESCRIPTION OF SUPPORT UNITS...................................................................................... 6 4 TEST TYPES AND RESULTS ......................................................................................................7 4.1 RADIATED EMISSION MEASUREMENT ................................................................................... 7 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT ...................................................... 7 4.1.2 TEST INSTRUMENTS .................................................................................................... 8 4.1.3 TEST PROCEDURES ..................................................................................................... 9 4.1.4 DEVIATION FROM TEST STANDARD ............................................................................ 9 4.1.5 TEST SETUP ................................................................................................................ 10 4.1.6 EUT OPERATING CONDITIONS .................................................................................. 11 4.1.7 TEST RESULTS ............................................................................................................ 11 4.2 BANDWIDTH MEASUREMENT ............................................................................................. 16 4.2.1 LIMITS OF BANDWIDTH MEASUREMENT .................................................................. 16 4.2.2 TEST INSTRUMENTS .................................................................................................. 16 4.2.3 TEST PROCEDURE ..................................................................................................... 17 4.2.4 DEVIATION FROM TEST STANDARD .......................................................................... 17 4.2.5 TEST SETUP ................................................................................................................ 17 4.2.6 EUT OPERATING CONDITIONS .................................................................................. 17 4.2.7 TEST RESULTS ............................................................................................................ 18 5 PHOTOGRAPHS OF THE TEST CONFIGURATION .…

Text truncated - open the document above for the full version.

Test Setup Photos