2ATIH-EPM1Earphone

AUKEY EP-M1 USER MANUAL Ear-tips Charging Case Earbuds In the Box - 01 - - 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 02 - - 03 - - 04 - - 05 - - 06 - User Manual USB-C Charging Cable Thank you for purchasing the AUKEY Move Mini True Wireless Stereo earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number. Specifications 規格 Product Number Bluetooth Version Charging Time Battery Life Earphones Impedance Maximum Output Power Frequency Range Microphone Sensitivity Battery Capacity Bluetooth Effective Distance Product Weight Charging Voltage AUKEY Move Mini 5.0 ≈2h ≈30h (with case) ≈5h (buds only) 32Ω 5mW 20Hz-20KHz -42dB@1KHz 500mAh 10m 35g DC 5V A2DP / AVRCP/HSP/ HFP Bluetooth Protocol PRODUCT DETAILS Please charge the earbuds and the charging case for at least 15 minutes before first use. LED Indicator Multi-Function Touch Panel LED Charging Indicator USB-C Charging Port LISTENING COMFORT Select the right size of ear-tip Choose the ear-tip with the most comfortable fit and best seal. To change an ear-tip, gently pull it off from the earbud and press on the new one. Wearing the Earbuds Gently insert the earbuds into the ear and adjust to a comfortable position by rotating them. R is for the right ear, and L for the left. BATTERY LIFE AND CHARGING Battery life In Bluetooth mode the buds can last for 5 hours of continuous play. Using the charging case, this can be extended to 30 hours. Charging the earbuds Place the earbuds in the charging case and they will automatically shut down and begin charging. Charging the charging case PLAYBACK CONTROLS Touch Control Music Play/Pause Next Track Volume + - Answer Hang Up Decline Call Activate Voice Assistant Left ear Right ear TapTap Double-tapDouble-tap TapTap Long-press 3s Long-press: volume - Long-press: volume + Long-press 3s Long-press 2sLong-press 2s Triple-tapTriple-tap Model: EP-M1 AUKEY Technology Co.,Ltd. Aukey Technology co., Ltd. www.aukey.com | [email protected] Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, Guangdong ,P.R.China FCC ID: 2ATIH-EPM1 Designed by AUKEY AUTOMATIC CONNECTION Automatic remote connection 1. When you turn on the earbuds, they will automatically reconnect to the last-paired device or enter pairing mode if no paired device is found. 2. To clear the pairing list, take the right earbud out of the charging case and then press and hold the touch-sensitive panel on the right earbud for 10 seconds until the LED indicator blinks red 5 times. After that, place the earbud back in the case and take it out again to enter pairing mode. 3.In pairing mode, the earbuds will automatically turn off after 5 minutes if no devices are paired. 4. The earbuds are automatically turned off when placed in the charging case. 5. If the Bluetooth connection is lost, they will automatically begin pairing. NOTE: If one of the earbuds has no sound output, put both earbuds back into the charging case and take them out again. The maximum wireless operating range is 10m (33ft). If you exceed this range, the earbuds will disconnect from your paired device. The connection will be re-established if you re-enter the wireless range within 5 minutes. The earbuds will automatically reconnect to the last-paired device. To connect with other devices, repeat the previous pairing steps. SAFETY INSTRUCTIONS 1. Do not place the earbuds in extremely high or low ambient temperatures for an extended period of time. Extreme temperatures will cause the device to deform. 2. Use electronic equipment with caution during thunderstorms. 3. This product contains small parts which could cause harm if swallowed. Keep out of the reach of children. 4. Using the earbuds for a long time at high volume may affect your hearing. Make sure to use an appropriate level of volume. BATTERY WARNING This product contains a lithium battery. Please do not disassemble, strike, crush, or place the product into contact with flames. Do not expose to high temperatures or direct sunlight for a prolonged period. If there is any swelling, leakage, odor, or any other abnormality in the battery compartment of the product, cease use immediately. Please dispose of used batteries properly and in accordance with local regulations. READ ALL INSTRUCTIONS BEFORE USE AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. FCC RF EXPOSURE STATEMENT: CAUTION! If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject …

Text truncated - open the document above for the full version.

Aukey Technology Co., Ltd Agent Authorization Company: Aukey Technology Co., Ltd Address: Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, Guangdong ,P.R.China Product Name: Earphone Trade Mark: AUKEY Model Number(s): EP-M1 FCC ID: 2ATIH-EPM1 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2021-01-05 Name: Jiaguang Zhou Title: Manager Company: Aukey Technology Co., Ltd

Aukey Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021-01-05 Subject; Request for Confidentiality FCC ID: 2ATIH-EPM1 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description BOM Software Security Requirements In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name / Title: Jiaguang Zhou / Manager Company: Aukey Technology Co., Ltd Address: Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, Guangdong ,P.R.China Phone: 0755-33620645 Fax: 0755-33620645 E-Mail: [email protected]

FCC ID: 2ATIH-EPM1 Fig. 1 Fig. 2 FCC ID: 2ATIH-EPM1 Fig. 3 Fig. 4 FCC ID: 2ATIH-EPM1 Fig. 5 Fig. 6 FCC ID: 2ATIH-EPM1 Fig. 7 Fig. 8 FCC ID: 2ATIH-EPM1 Fig. 9 Fig. 10

_____________________________________________________________________________________________________ LABEL AND LOCATION (Size: L1.0cm x 0.5cm) Label Location FCC ID: 2ATIH-EPM1

FCC ID: 2ATIH-EPM1 Fig. 1 Fig. 2 Antenna FCC ID: 2ATIH-EPM1 Fig. 3 Fig. 4 FCC ID: 2ATIH-EPM1 Fig. 5 Fig. 6

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong RF Exposure evaluation Report Reference No. .................... : FCC ID. ............................................ : GTS20201119015-1-6 2ATIH-EPM1 Compiled by ( position+printed name+signature) .. : File administrators Peter Xiao Supervised by ( position+printed name+signature) .. : Test Engineer Moon Tan Approved by ( position+printed name+signature) .. : Manager Simon Hu Date of issue ..................................... : Dec.07, 2020 Representative Laboratory Name : Shenzhen Global Test Service Co.,Ltd. Address ............................................. : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong,China Applicant’s name ............................ : Aukey Technology Co., Ltd Address ............................................. : Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, Guangdong ,P.R.China Test specification .......................... : Standard ........................................... : 47CFR §1.1310 47CFR §2.1093 KDB447498 v06 TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ....................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .................... : Earphone Trade Mark ....................................... : AUKEY Manufacturer ..................................... : Aukey Technology Co., Ltd Model/Type reference ....................... : EP-M1 Listed Models ................................... : N/A Exposure category ............................ : General population/uncontrolled environment EUT Type .......................................... : Production Unit Hardware Version ............................ : XCA1001_V31 Software Version .............................. : XC-1001(31BT)-BT8896A_V16 Rating ............................................... : DC 3.7V by battery Recharged by DC 5.0V/1.0A Result ................................................ : PASS Report No.: GTS20201119015-1-6 Page 2 of 8 T E S T R E P O R T Test Report No. : GTS20201119015-1-6 Dec.07, 2020 ______________________________________________________________________________________________ Date of issue Equipment under Test : Earphone Model /Type : EP-M1 Listed model : N/A Applicant : Aukey Technology Co., Ltd Address : Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, Guangdong ,P.R.China Manufacturer : Aukey Technology Co., Ltd Address : Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, Guangdong ,P.R.China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20201119015-1-6 Page 3 of 8 Contents 1. S U M M A R Y .................................................................................. 4 1.1. EUT configuration ....................................................................................................................................... 4 1.2. Product Description .................................................................................................................................... 4 2. T E S T E N V I R O N M E N T ................................................................... 5 2.1. Address of the test laboratory ................................................................................................................... 5 2.2. Test Facility .................................................................................................................................................. 5 2.3. Environmental conditions .......................................................................................................................... 5 2.4. Statement of the measurement uncertainty ............................................................................................. 5 3 . M E T H O D O F M E A S U R EM E N T ......................................................... 6 3.1. Applicable Standard .................................................................................................................................... 6 3.2. Evaluation Method and Limit...................................................................................................................... 6 4. C O N D U C T E D P O W E R R E S U L T S ...................................................... 7 5. M A N U F A C T U R I N G T O L E R ANCE ...................................................... 7 6 . E V A L U A T I O N R E S U L TS ................................................................ 7 6.1. Standalone Evaluation ................................................................................................................................ 7 7. C O N C L U S I O N ............................................................................. 8 Report No.: GTS20201119015-1-6 Page 4 of 8 1. S U M M A R Y 1.1. EUT configuration The following peripheral devices and interface cables were connected during the measurement: ● - supplied by the manufacturer ○ - supplied by the lab ● Adapter Length (m)…

Text truncated - open the document above for the full version.

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID. ............................................ : GTS20201119015-1-5 2ATIH-EPM1 Compiled by ( position+printed name+signature).. : File administrators Peter Xiao Supervised by ( position+printed name+signature).. : Test Engineer Moon Tan Approved by ( position+printed name+signature).. : Manager Simon Hu Date of issue ..................................... : Dec.07, 2020 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong,China Applicant’s name ............................ : Aukey Technology Co., Ltd Address ............................................ : Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, Guangdong ,P.R.China Test specification ........................... : Standard ........................................... : FCC Part 15.247: Operation within the bands 902-928 MHz, 2400- 2483.5 MHz and 5725-5850 MHz TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ....................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Earphone Trade Mark ....................................... : AUKEY Manufacturer .................................... : Aukey Technology Co., Ltd Model/Type reference ...................... : EP-M1 List Models ..................................... : N/A Modulation Type ............................... : GFSK,π/4-DQPSK,8DPSK Operation Frequency ........................ : From 2402MHz to 2480MHz Hardware Version ............................ : XCA1001_V31 Software Version .............................. : XC-1001(31BT)-BT8896A_V16 Rating ............................................... : DC 3.7V by battery Recharged by DC 5.0V/1.0A Result ............................................... : PASS Report No.: GTS20201119015-1-5 Page 2 of 44 T E S T R E P O R T Test Report No. : GTS20201119015-1-5 Dec.07, 2020 ______________________________________________________________________________________________ Date of issue Equipment under Test : Earphone Model /Type : EP-M1 Listed model : N/A Applicant : Aukey Technology Co., Ltd Address : Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, Guangdong ,P.R.China Manufacturer : Aukey Technology Co., Ltd Address : Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, Guangdong ,P.R.China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20201119015-1-5 Page 3 of 44 Contents 1. TEST STANDARDS ......................................................................................................................................... 4 2. SUMMARY ....................................................................................................................................................... 5 2.1. General Remarks ................................................................................................................................... 5 2.2. Product Description ................................................................................................................................ 5 2.3. Equipment Under Test ........................................................................................................................... 6 2.4. Short description of the Equipment under Test (EUT) ........................................................................... 6 2.5. EUT operation mode .............................................................................................................................. 6 2.6. Block Diagram of Test Setup ................................................................................................................. 7 2.7. Related Submittal(s) / Grant (s) ............................................................................................................. 7 2.8. EUT Exercise Software .......................................................................................................................... 7 2.9. Special Accessories ............................................................................................................................... 7 2.10. External I/O Cable ................................................................................................................................ 7 2.11. Modifications ........................................................................................................................................ 7 3. TEST ENVIRONMENT ..................................................................................................................................... 8 3.1. Address of the test laboratory ................................................................................................................ 8 3.2. Test Facility ....…

Text truncated - open the document above for the full version.

FCC ID: 2ATIH-EPM1 _______________________________________________________________________________________________ Page 1 of 2 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Fig. 1 Fig. 2 FCC ID: 2ATIH-EPM1 _______________________________________________________________________________________________ Page 2 of 2 1.2. Photo of Conducted Emissions Measurement Fig. 3