2ATIH-LT-T7SSmart LED Lamp

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID:2ATIH-LT-T7S 100 x 80mm 105g User Manual Smart LED Lamp Thank you for purchasing the AUKEY LT-T7s Smart LED Lamp. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number. Package Contents Smart LED Lamp Power Adapter User Manual Warranty Card Specifications Model Luminous Flux Color Temperature Color Rendering Index Input Power Consumption Number of LEDs LED Type Materials Cable Length Dimensions Weight LT-T7s 300 lm 2700K–6500K ≥80Ra AC 100–240V 50/60Hz 5W 36 RGB light: SMD5050; white light: SMD2835 ABS, PP, silicone 1.8m / 5.9ft 218 x 100mm / 8.58” x 3.94” 560g / 19.75oz - 01 - Model: LT-T7s Made in China AUKEY International Ltd. www.aukey.com | [email protected] No.102, Building P09, Electronics Trade Center Huanan City, Pinghu Town, Longgang District Shenzhen, Guangdong, 518111, CN Warranty & Customer Support For questions, support, or warranty claims, please contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number. Amazon US orders: [email protected] Amazon EU orders: [email protected] Amazon CA orders: [email protected] Amazon JP orders: [email protected] *Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If you have purchased from a different seller, please contact them directly for service or warranty issues. FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. - 07 -- 08 - - 02 - Product Diagram Touch-Sensitive Top Surface Lamp Cover Multi-Function Button Power Input Port Cable Slot To use app control and voice control functions, the lamp must be connected to the AUKEY Home app and appropriate voice assistant app The color temperature of the light can only be adjusted via app or voice control Supports 2.4GHz Wi-Fi network only Keep away from liquids and extreme heat The touchpad is a sensitive component. Keep it away from static electricity Switch off the lamp and unplug the power adapter before cleaning or when not in use for a long time Clean the lamp with a soft, dry cloth ● ● ● ● ● ● ● Download Amazon Alexa > Sign into your Amazon account > Tap on the top left corner (main menu) > Skills & Games > Search for ‘smart life’ > ENABLE > Sign into your AUKEY Home account. Connection is completed. You can control the lamp using Alexa voice commands now. Use the name of the lamp you set in the AUKEY Home app to control the lamp. Some Alexa voice commands examples are listed below: ‘Alexa, turn on/off [lamp name].’ ‘Alexa, set [lamp name] to 25/50/75/100 percent.’ ‘Alexa, set [lamp name] to blue.’ ‘Alexa, make [lamp name] warm white.’ ‘Alexa, set [lamp name] to daylight.’ Product Care & Use - 06 - Using Amazon Alexa Plug the power adapter into an AC outlet Connect the cable to the power input port in the bottom of the base 1. 2. - 03 - Getting Started Connecting to Power Tap the top surface to turn lamp on/off Short-press the multi-function button to switch lighting mode (white light / manual color-cycling / night light) Touch and hold on the top surface to smoothly scale brightness in white light mode or to cycle through the colors in manual color-cy- cling mode 1. 2. 3. Download ‘AUKEY Home’ APP1. Method 1 Method 2 Search and download "AUKEY Home" in the APP Store (IOS) Search and download "AUKEY Home" in the Google Play (Android) Scan the QR code below to download the ‘AUKEY Home’ app Physical Control App Control For Google phones, just say ‘OK Google’ to activate the Google Assistant. For other phones, access the app for voice control ● Voice Control You must first download and set up the ‘AUKEY Home’ app by following instructions 1 and 2 in ‘App Control’ above. Then follow instructions below to set up voice control for Google Assistant or Amazon Alexa. Using Google Assistant Download Google Assistant > Sign into your Google account > Tap on > Assistant > Home control > DEVICES > Tap ‘+’ > Add devices > Search for ‘Tuya Smart’ > Sign into your AUKEY Home account. Connection is completed. You can turn on/off the lamp and adjust the lighting color and brightness using Google Assistant voice commands now. Some examples are listed below: ‘Turn on/off the light.’ ‘Set the light brigh…

Text truncated - open the document above for the full version.

Aukey Technology Co.,Ltd. Statement Product Name: Smart LED Lamp Model N o.: LT-T7s, LT-T6, LT-T7, LT-T7R, LT-T21, LT-T22, LT-T23, LT-T24, LT-T25, LT-T26, LT-T27, LT-T28, LT-T29, LT-T30 We(Aukey Technology Co.,Ltd., Room 102, Building P09, South China City Electronic Trading Center, Longgang District, Shenzhen, Guangdong, 518111, China ) hereby state that all models above are identical in interior structure, electrical circuits and components, and just the color and model No. are different for marking requirement. Signature: Name / title: Jiaguang Zhou / Manager Tel: (86) 755-33620645 Email: [email protected] Date: 2020‐04‐26

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Aukey Technology Co.,Ltd. Address: Room 102, Building P09, South China City Electronic Trading Center, Longgang District, Shenzhen, Guangdong, 518111, China Product Name: Smart LED Lamp Model Number: LT-T7s, LT-T6, LT-T7, LT-T7R, LT-T21, LT-T22, LT-T23, LT-T24, LT-T25, LT-T26, LT-T27, LT-T28, LT-T29, LT-T30 FCC Identifier: 2ATIH-LT-T7S We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jiaguang Zhou Date: 4/26/2020 Title: Manger Signature of applicant:

C5266091_X10_Ed.1 1/1 Aukey Technology Co.,Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 4/26/2020 Subject: Request for Confidentiality FCC ID: 2ATIH-LT-T7S To Wh om It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above m entioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Jiaguang Zhou 4/26/2020 Title: Manager

- Page 1 of 4 - Report No.: MTi20030613-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China APPENDIX 1: EUT PHOTO Photo 1 (For model LT-T7s) Photo 2 - Page 2 of 4 - Report No.: MTi20030613-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Photo 3 Photo 4 - Page 3 of 4 - Report No.: MTi20030613-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Photo 5 Photo 6 - Page 4 of 4 - Report No.: MTi20030613-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Photo 7 Photo 8 ----END OF REPORT----

- Page 1 of 5 - Report No.: MTi20030613-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China APPENDIX 1: EUT PHOTO Photo 1 (For model LT-T7s) Photo 2 - Page 2 of 5 - Report No.: MTi20030613-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Photo 3 Photo 4 WIFI Antenna - Page 3 of 5 - Report No.: MTi20030613-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Photo 5 Photo 6 - Page 4 of 5 - Report No.: MTi20030613-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Photo 7 Photo 8 - Page 5 of 5 - Report No.: MTi20030613-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Photo 9 Photo 10 ----END OF REPORT----

This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China MPE REPORT FCC ID:2ATIH-LT-T7S Date of issue: Apr. 10, 2020 Report number: MTi20030613-4E2 Sample description: Smart LED Lamp Model(s): LT-T7s, LT-T6, LT-T7, LT-T7R, LT-T21, LT-T22, LT-T23, LT-T24, LT-T25, LT-T26, LT-T27, LT-T28, LT-T29, LT-T30 Applicant: Aukey Technology Co., Ltd. Address: Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, China. Date of test: Mar. 23, 2020 to Apr. 10, 2020 Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 4 - Report No.: MTi20030613-4E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China TEST RESULT CERTIFICATION Applicant’s name: Aukey Technology Co., Ltd. Address: Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, China. Manufacture's name: Pulnda International Limited Address: CHANGZHI SCIENCE PARK ,No. 7 WEST INDUSTRIAL ZONE, SHAJING TOWN, BAOAN DISTRICT, SHENZHEN CITY, CHINA Product name: Smart LED Lamp Trademark: AUKEY Model and/or type reference . : LT-T7s Serial model: LT-T6, LT-T7, LT-T7R, LT-T21, LT-T22, LT-T23, LT-T24, LT-T25, LT-T26, LT-T27, LT-T28, LT-T29, LT-T30 RF exposure procedures: KDB 447498 D01 v06 This device described above has been tested by Shenzhen Microtest Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by: Danny Xu Apr. 10, 2020 Reviewed by: Leo Su Apr. 10, 2020 Approved by: Tom Xue Apr. 10, 2020 - Page 3 of 4 - Report No.: MTi20030613-4E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method Friis transmission formula: Pd= (Pout*G)\ (4*pi*R 2 ) Where Pd= Power density in mW/cm2 Pout=output power to antenna in mW G= Numeric gain of the antenna relative to isotropic antenna Pi=3.1415926 R= distance between observation point and center of the radiator in cm(20cm) Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. - Page 4 of 4 - Report No.: MTi20030613-4E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Measurement Result WIFI: Operation Frequency: WIFI 802.11b/g/n HT20: 2412-2462MHz, Power density limited: 1mW/ cm 2 Antenna Type: FPC Antenna; antenna gain: -2dBi R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(-2/10)=0.63 Channel Freq. (MHz) modulation conducted power Tune- up power Max Antenna Evaluation result at 20cm Power density Limits (dBm) (dBm) tune-up power Gain Power density(mW/cm2 ) (mW/cm2) (dBm) (mW) Numeric Ant A Ant A Ant A Ant A Ant A Ant A 2412 802.11b 16.45 16±1 17 50.118723 0.63 0.00628 1 2437 16.48 16±1 17 50.118723 0.63 0.00628 1 2462 16.05 16±1 17 50.118723 0.63 0.00628 1 2412 802.11g 16.63 16±1 17 50.118723 0.63 0.00628 1 2437 16.38 16±1 17 50.118723 0.63 0.00628 1 2462 16.72 16±1 17 50.118723 0.63 0.00628 1 2412 802.11n H20 16.62 16±1 17 50.118723 0.63 0.00628 1 2437 16.79 16±1 17 50.118723 0.63 0.00628 1 2462 16.36 16±1 17 50.118723 0.63 0.00628 1 Conclusion: For the max result: 0.00628≤ 1.0 for 1g SAR, No SAR is required. ----END OF REPORT----

This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Test Report FCC ID:2ATIH-LT-T7S Date of issue: Apr. 10, 2020 Report number: MTi20030613-4E1 Sample description: Smart LED Lamp Model(s): LT-T7s, LT-T6, LT-T7, LT-T7R, LT-T21, LT-T22, LT-T23, LT-T24, LT-T25, LT-T26, LT-T27, LT-T28, LT-T29, LT-T30 Applicant: Aukey Technology Co., Ltd. Address: Room 102, Building P09, South China City Electronic Trading Center, Longgang District, Shenzhen, China. Date of test: Mar. 23, 2020 to Apr. 10, 2020 Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 51 - Report No.: MTi20030613-4E1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Table of Contents 1 GENERAL INFORMATION ...................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................... 5 1.2 OPERATION CHANNEL LIST .............................................................................................................................................. 6 1.3 TEST CHANNEL LIST ....................................................................................................................................................... 6 1.4 ANCILLARY EQUIPMENT LIST ........................................................................................................................................... 6 1.5 DESCRIPTION OF SUPPORT UNITS .................................................................................................................................... 6 2 SUMMARY OF TEST RESULTS ................................................................................................................................. 7 3 TEST FACILITIES AND ACCREDITATIONS .................................................................................................................. 8 3.1 TEST LABORATORY ........................................................................................................................................................ 8 3.2 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 8 3.3 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 8 3.4 TEST SOFTWARE ........................................................................................................................................................... 8 4 EQUIPMENT LIST .................................................................................................................................................. 9 5 TEST RESULT ....................................................................................................................................................... 10 5.1 ANTENNA REQUIREMENT ............................................................................................................................................. 10 5.1.1 Standard requirement ....................................................................................................................................... 10 5.1.2 EUT antenna ..................................................................................................................................................... 10 5.2 PEAK OUTPUT POWER ................................................................................................................................................. 11 5.2.1 Limit .................................................................................................................................................................. 11 5.2.2 Test setup .......................................................................................................................................................... 11 5.2.3 Test procedure ................................................................................................................................................... 11 5.2.4 Test results ........................................................................................................................................................ 12 5.3 POWER SPECTRAL DENSITY ........................................................................................................................................... 13 5.3.1 Limit .................................................................................................................................................................. 13 5.3.2 Test setup .......................................................................................................................................................... 13 5.3.3 Test procedure ................................................................................................................................................... 13 5.3.4 Test results ........................................................................................................................................................ 14 5.4 CONDUCTED EMISSION ................................................................................................................................................ 17 5.4.1 Limits ..........................................................…

Text truncated - open the document above for the full version.

Model: LT-T7s Radiated emission Conducted emission