2ATIH-PB-WL02Power Bank

ᶆ䍞J䬒⡾㓮ተሮ[PPদ࡭ঋ唇ਂ䶘দ࡭㻻䇘ᯯᕅ僇傢䪿㻻䇘ሷ䶘㜂䶘⮏ⲳ EnglishDeutschFrançais EspañolItaliano 01~0809~1516~2223~2930~3637~43 Contents - 01 - Thank you for purchasing AUKEY products. Please read this user manual carefully and keep it for future reference. Package ContentsBasix Pro Wireless Charging Power BankUSB-C to A CableUser Manual Warranty CardGetting Started Place your phone or tablet on the center of your Basix Pro Wireless Charging Power Bank - 02 - - 03 - - 04 - - 05 - - 06 - - 07 - - 08 - Out PD In/Out Wireless Charging Surface (silicone ring side) Power Button Wireless Charging Indicator LED Battery Level Indicator ŏŏŏŏ 100% ŏŏŏʊ 75% ŏŏʊʊ 50% ŏʊʊʊ 25% USB-C Input / OutputUSB Output Ready to charge Solid orange Charging Solid orange(5W) Pulsing orange(Quick Charge) Fully charged LED Turn Off Unsupporteddevice detected FOD* Blinks orange & red Plug it into a USB charger Wireless Charging LED status indicators* This means that with a Qi-certified product, the transmitter of the wireless charging system can detect if a foreign object, such as coins, metal, is on its surface. In this event, the wireless charger either stops charging or does not start charging at all Specifications ModelTechnologyCapacityBattery TypeUSB-C InputUSB-C OutputUSB-A OutputWireless OutputMax Power OutputDimensionsWeight PB-WL02Qi, USB Power Delivery 3.0, Qualcomm ® Quick Charge 3.0 10000mAh / 37WhLithium polymer(Power Delivery 3.0) DC 5V 3A / 9V 2A(Power Delivery 3.0) DC 5V 3A / 9V 2A / 12V 1.5A(Quick Charge 3.0) DC 5V 2.4A / 9V 2A / 12V 1.5A5W, 7.5W, 10W18W155 x 75 x 15.5mm / 6.10" x 2.95" x 0.61"242g / 8.54oz What is USB Power Delivery (PD)?USB Power Delivery is a universal multi-voltage charging standard that dynamically negotiates power output over a USB Type-C connection to safely and efficiently recharge a wide range of compatible devices.To get USB PD, the following are required: What is Quick Charge 3.0? Charge compatible devices up to four times faster than conventional charging. Quick Charge 3.0 is engineered to refuel devices twice as fast as Quick Charge 1.0 and is up to 38% more efficient than Quick Charge 2.0. Backward-compatible with Quick Charge 2.0/1.0 devices.Wireless ChargingPlace your phone or tablet on the center of your Basix Pro Wireless Charging Power BankNotes Warranty & Customer SupportFor questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number.Amazon US orders: [email protected] Amazon EU orders: [email protected] Amazon CA orders: [email protected] Amazon JP orders: [email protected] *Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If you have purchased from a different seller, please contact them directly for service or warranty issues.FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC RF exposure statement:The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environ-ment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. Device (phone, tablet, laptop) that supports USB PDUSB-C charger with USB PDUSB-C to C cable or Apple USB-C to Lightning Cable ŏŏŏ When the wireless charging mode is turned on, wireless charging will begin at 5W. If no devices are connected to the USB-A or USB-C port, output will automatically increase to 7.5W or 10W for ompatible wireless fast charging devices after 15 secondsIf you press the power button to enter wireless charging mode while the USB-A or USB-C port is fast-charging your device, the output on that port will be limited to 5V. The power bank automatically exits wireless charging mode after 15 seconds if no Qi device is detected, and the USB-A or USB-C port will resume fast charging ŏŏ When any two ports (including wireless charging) are output at the same time, the output will automatically turn off the fast charging mode (9V / 12V), Enter 5V voltage output mode (wireless automatic switching 5W)The product supports simultaneous output of more than two devices(Note: If the total output power exceeds 18W, the product will activate over-current protection to turn off discharging of any output, it is normal situation)The product supports charging and discharging at…

Text truncated - open the document above for the full version.

1 - Page 1 of 5 - Report No.: MTi20022820-8E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China hg APPENDIX 1: EUT PHOTO Photo 1 (For model PB-WL02) Photo 2 1 - Page 2 of 5 - Report No.: MTi20022820-8E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Photo 3 Photo 4 1 - Page 3 of 5 - Report No.: MTi20022820-8E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Photo 5 Photo 6 1 - Page 4 of 5 - Report No.: MTi20022820-8E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Photo 7 Photo 8 1 - Page 5 of 5 - Report No.: MTi20022820-8E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Photo 9 Photo 10 ----END OF REPORT----

1 - Page 1 of 4 - Report No.: MTi20022820-8E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China APPENDIX 1: EUT PHOTO Photo 1 (For model PB-WL02) Photo 2 Wireless charging antenna 1 - Page 2 of 4 - Report No.: MTi20022820-8E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Photo 3 Photo 4 1 - Page 3 of 4 - Report No.: MTi20022820-8E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Photo 5 Photo 6 1 - Page 4 of 4 - Report No.: MTi20022820-8E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Photo 7 ----END OF REPORT----

version01 Aukey Technology Co.,Ltd. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: PB-WL02, PB-WL03 FCC ID: 2ATIH-PB-WL02 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for Internal antenna type(s) described below: Model No. of antenna: N/A Type of antenna: coil antenna Gain of the antenna: 0 dBi Frequency range: 115–205 kHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Aukey Technology Co.,Ltd. Address: Room 102, Building P09, South China City Electronic Trading Center, Longgang District, Shenzhen, Guangdong, 518111, China City: Shenzhen ZIP / Postal code: Country: China Contact: Jiaguang Zhou Date: 5/9/20 Signature:

This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China EXPOSURE REPORT FCC ID: 2ATIH-PB-WL02 Date of issue: Apr. 08, 2020 Report Number: MTi20022820-8E2 Sample Description: Power Bank Model(s):PB-WL02, PB-WL03 Applicant: Aukey Technology Co., Ltd Address: Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, Guangdong, 518111, China Date of Test: Mar. 27, 2020 - Apr. 08, 2020 Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 9 - Report No.: MTi20022820-8E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Test Result Certification Applicant’s name: Aukey Technology Co., Ltd Address: Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, Guangdong, 518111, China Manufacture's name: Shenzhen Hasmine Technology Co., Ltd Address: Room 208, Building 8, Haomai-High-tech park, Huating Road, Dalang street, Longhua new district, Shenzhen, Guangdong Product name: Power Bank Trademark: AUKEY Model name: PB-WL02, PB-WL03 Standard: FCC CFR 47 PART 1 , 1.1310 RF Exposure Procedures: KDB 680106 D01 RF Exposure Wireless Charging App v03 This device described above has been tested by Shenzhen Microtest Co., Ltd. and the test results show that the equipment under test (EUT) compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by: Danny Xu Apr. 08, 2020 Reviewed by: Leo Su Apr. 08, 2020 Approved by: Tom Xue Apr. 08, 2020 - Page 3 of 9 - Report No.: MTi20022820-8E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China 1 General Information 1.1 Description of EUT Product name: Power Bank Brand name: AUKEY Model name: PB-WL02 Series model: PB-WL03 Deference in serial model: All the models are of the same circuit and RF module, except the model No.. Operation frequency: 115–205 kHz Operational mode: Wireless charging Modulation type: ASK Antenna type: Coil Antenna Power source: DC 9V from adapter AC 120V/60Hz or DC 3.7V from battery Battery: DC 3.7V 10000mAh Adapter information: N/A 1.2 Ancillary equipment list Equipment Model S/N Manufacturer Adapter EQ-24BCN / Huizhou Dongyang Yienbi Electronics Co., Ltd. Load / / / 1.3 Measurement uncertainty Measurement Uncertainty for a Level of Confidence of 95 %, U=2xUc(y) Radiated emission(150kHz~30MHz) ± 2.5 dB Radiated emission(30MHz~1GHz) ± 4.2 dB Radiated emission (above 1GHz) ± 4.3 dB Temperature ±1 degree Humidity ± 5 % - Page 4 of 9 - Report No.: MTi20022820-8E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China 2 Testing site Test Site Shenzhen Microtest Co., Ltd Test Site Location No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China FCC Registration No.: 448573 - Page 5 of 9 - Report No.: MTi20022820-8E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China 3 List of test equipment Equipment No. Equipment Name Manufacturer Model Serial No. Calibration date Due date MTI-E068 Broadband Field Meter Narda Safety Test Solutions GmbH NBM- 520 D-1699 2019/07/13 2020/07/12 MTI-E069 Probe E-Field Narda Safety Test Solutions EF0691 H-0571 2019/07/13 2020/07/12 - Page 6 of 9 - Report No.: MTi20022820-8E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China 4 Test Results 4.4 Maximum permissible exposure 4.4.1 Limit Frequency range(MHz) Electric field strength(V/m) Magnetic field strength(A/m) Power density(mW/cm2) Averaging time(minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f 2 6 30-300 61.4 0.163 1.0 6 6 300-1500 f/300 6 1500-100000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f 2 30 30-300 27.5 0.073 0.2 30 300-1500 f/1500 30 1500-100000 1 30 f = frequency in MHz * = Plane-wave equivalent power density 4.4.2 Test Procedures E and H-field measurements should be made with the center of the probe at a distance of 15 cm surrounding the device and 20 cm above the top surface of the primary/client pair. These measurements should be repeated for three different client battery levels, 1%, 50%, and 99%. Record the test results. KDB 680106 D01 RF Exposure Wireless Charging App v03: (1) Power transfer frequency is less than 1MHz. (2) Output power from each primary coil is less than or equal to 15 watts. (3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. (4) Client device is placed directly in contact with the transmitter. (5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). (6) The aggregate H-field strengths at 15 cm surrounding the device an…

Text truncated - open the document above for the full version.

This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Test Report FCC ID: 2ATIH-PB-WL02 Date of issue: Apr. 08, 2020 Report number: MTi20022820-8E1 Sample description: Power Bank Model(s): PB-WL02, PB-WL03 Applicant: Aukey Technology Co., Ltd Address: Room 102, Building P09, South China City Electronic Trading Center, Longgang District, Shenzhen, Guangdong, 518111, China Date of test: Mar. 27, 2020 - Apr. 08, 2020 Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 21 - Report No.: MTi20022820-8E1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China Table of Contents 1 GENERAL INFORMATION ................................................................................................................................. 4 1.1 FEATURE OF EQUIPMENT UNDER TEST (EUT) ................................................................................................................... 4 1.2 TEST MODE .............................................................................................................................................................. 4 1.3 EUT TEST SETUP ....................................................................................................................................................... 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 SUMMARY OF TEST RESULT ............................................................................................................................. 6 2.1 OPERATION CHANNEL LIST ........................................................................................................................................... 6 2.2 TEST CHANNEL .......................................................................................................................................................... 6 3 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 7 3.1 TEST LABORATORY ..................................................................................................................................................... 7 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 3.3 MEASUREMENT UNCERTAINTY ...................................................................................................................................... 7 3.4 TEST SOFTWARE ........................................................................................................................................................ 7 4 LIST OF TEST EQUIPMENT ................................................................................................................................ 8 5 TEST RESULTS .................................................................................................................................................. 9 5.1 ANTENNA REQUIREMENT ............................................................................................................................................ 9 5.1.1 Standard requirement ................................................................................................................................. 9 5.1.2 EUT Antenna ............................................................................................................................................... 9 5.2 CONDUCTED EMISSION ............................................................................................................................................. 10 5.2.1 Limits ......................................................................................................................................................... 10 5.2.2 Test Procedures ......................................................................................................................................... 10 5.2.3 Test Setup .................................................................................................................................................. 10 5.2.4 Test Result ................................................................................................................................................. 11 5.3 RADIATED EMISSION ................................................................................................................................................. 12 5.3.1 Limits ......................................................................................................................................................... 12 5.3.2 Test Procedures ......................................................................................................................................... 13 5.3.3 Test Setup .................................................................................................................................................. 14 5.3.4 Test Result ................................................................................................................................................. 14 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 19 5.4.1 Test method .....................................................................................................…

Text truncated - open the document above for the full version.

Model: PB-WL02 Radiated emission