2ATX9-BK181ABiWaze Clear

ABMRC LLC 860 Blue Gentian Road, Suite 200 Eagan, MN 55121 USA 877-ABM-RC01 877-226-7201 www.abmrc.com Applicant as U.S. Agent Letter of Attestation Date: 11-DEC-2025 To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2ATX9-BK181A ABMRC LLC (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Designated U.S. Agent from Applicant Company Company Name: ABMRC LLC Address: ABMRC LLC, 860 Blue Gentian Road, Suite 200, Eagan, Minnesota, USA, 55121 Tel.: +1-877-226-7201 Contact Person: Priyanka Paul Email: [email protected] FCC FRN: 0028637114 Sincerely yours, Signature Printed Name: Priyanka Paul Title: QARA Director Email: [email protected] Tel.: +91 7299334392

ABMRC LLC 860 Blue Gentian Road, Suite 200 Eagan, MN 55121 USA 877-ABM-RC01 877-226-7201 www.abmrc.com Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 10-30-2025 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: 2ATX9-BK181A ABMRC LLC (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Priyanka Paul Title: QARA Director Address: 860 Blue Gentian Road, Suite 200, Eagan, Minnesota-55121, USA Tel.: +91-7299334392 Email: [email protected]

ABMRC LLC 860 Blue Gentian Road, Suite 200 Eagan, MN 55121 USA 877-ABM-RC01 877-226-7201 www.abmrc.com Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 10-30-2025 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: 2ATX9-BK181A ABMRC LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Priyanka Paul Title: QARA Director Address: 860 Blue Gentian Road, Suite 200, Eagan, Minnesota-55121, USA Tel.: +91-7299334392 Email: [email protected]

ABMRC LLC 860 Blue Gentian Road, Suite 200 Eagan, MN 55121 USA 877-ABM-RC01 877-226-7201 www.abmrc.com Authority to Act as Agent Date: 30/10/2025 TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint Vinay N, TUV Rheinland India Pvt Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with ABMRC LLC, 860 Blue Gentian Road, Suite 200, Eagan, Minnesota, USA, 55121. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: 30/10/2025 Agreement is valid for 12 months from the above date. By: __________________________ Priyanka Paul (Signature) (Print name) QARA Director +91 7299334392 (Title) (Telephone) On behalf of: ABMRC LLC (Company Name)

ABMRC LLC 860 Blue Gentian Road, Suite 200 Eagan, MN 55121 USA 877-ABM-RC01 877-226-7201 www.abmrc.com Date: 30/10/2025 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: 2ATX9-BK181A Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup*** Short Term Permanent Tune-Up Procedure Short Term Permanent User’s Manual*** Short Term Permanent Part List/ Antenna Gain Information Datasheet ABMRC LLC has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: _______________________________________________ Priyanka Paul (Signature/QARA Director) (Print name) Tel: +91-7299334392 Email: [email protected]

ABMRC LLC 860 Blue Gentian Road, Suite 200 Eagan, MN 55121 USA 877-ABM-RC01 877-226-7201 www.abmrc.com Sl.No Radio Protocol FCC Test Report No ISED Test Report No FCC Grant Approved date ISED Grant Approved date 1 BLE RF150626C12-2 IC150626C12-2 28/11/2016 20/03/2017 2 BT RF150626C12-1 IC150626C12-1 3 Wi-Fi 2.4GHz RF150626C12 IC150626C12 We, ABMRC LLC, believe that the conducted signal test data on original reports provided by the Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch FCC ID: ZQ6-AP6212SD & IC: 11956A-AP6212SD approved on 28/11/2016 for FCC & 20/03/2017 for ISED and provided by Ampak Technology Inc., can be re-used for the following reasons: 1.Applicant has built in the radio module according to the specific radio module integration guides. 2.No changes have been made on radio module. 3.Re-test the conducted power for spot check verification, the radiated spurious emission, and re-evaluated the RF exposure. Date: 07-Nov-2025 Justification for Re-use of Radio Test Results Signed For and on Behalf of ABMRC LLC, USA. Name: Priyanka Paul Title: Director, Quality & Regulatory

Product Label ID Label Location

Prüfbericht – Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: IN254LFP 001 / IN254J69 001 Auftrags-Nr.: Order no.: 147013404 70 Seite 1 von 4 Page 1 of 4 Kunden-Referenz-Nr.: Client reference no.: 2009322 Auftragsdatum: Order date: 2025-01-24 Auftraggeber: Client: ABMRC, LLC 860 Blue Gentian Road, Suite 200, Eagan, Minnesota-55121, USA Prüfgegenstand: Test item: BiWaze Clear Bezeichnung / Typ-Nr.: Identification / Type no.: BK181 Serien -Nr.: KNS24A007 Serial no.: Auftrags-Inhalt: Order content: Testing and issue of Test Report with Grant Certificate Prüfgrundlage: Test specification: FCC Part1 1.1310, KDB 447498 D01 Wareneingangsdatum: Date of sample receipt: 2025-09-05 Prüfmuster-Nr.: Test sample no: A004085214-003 Prüfzeitraum: Testing period: 2025-09-05 - 2025-09-12 Ort der Prüfung: Place of testing: Wireless laboratory, Bangalore Prüflaboratorium: Testing laboratory: TÜV Rheinland (India) Pvt.Ltd., 27/B, 2nd Cross, Electronic City Phase1 Bangalore -560 100, India FCC Test site registration number: 496599 ISED Test site registration number: 27711 Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Naveen Kumar Muthyalapati Venkata genehmigt von: authorized by: X Signed by: Madhu Nagaraju Datum: Date: 2025-11-25 Ausstellungsdatum: Issue date: 2025-11-25 Stellung / Position: Senior Engineer Stellung / Position: Assistant Manager Sonstiges / Other: FCC ID: 2ATX9-BK181A Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (India) Pvt. Ltd. # 27/B, 2nd Cross Road, Electronics City Phase 1, Bangalore – 560 100, INDIA. Mail: [email protected] ∙ Web: www.ind.tuv.com V101023IMEASR Produkte Products www.tuv.com Prüfbericht - Nr.: Test Report No.: IN254LFP 001 / IN254J69 001 Seite 2 von 4 Page 2 of 4 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezüglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision…

Text truncated - open the document above for the full version.

Report No.: RF150626C12 Page No. 1 / 46 Report Format Version: 6.1.1 FCC Test Report Report No.: RF150626C12 FCC ID: ZQ6-AP6212SD Test Model: AP6212SD Received Date: June 26, 2015 Test Date: Aug. 27 to Sep. 02, 2015 Issued Date: July 29, 2016 Applicant: Ampak Technology Inc. Address: No1. Jen Ai Road. Hokou, Hsinchu, Taiwan,30352 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (3): E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150626C12 Page No. 2 / 46 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal ................................................................................................................... 11 3.4 Description of Support Units ............................................................................................................. 12 3.4.1 Configuration of System under Test .................................................................................................. 12 3.5 General Description of Applied Standards ........................................................................................ 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 15 4.1.3 Test Procedures ................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 16 4.1.5 Test Setup .......................................................................................................................................... 17 4.1.6 EUT Operating Conditions ................................................................................................................. 17 4.1.7 Test Results ....................................................................................................................................... 18 4.2 Conducted Emission Measurement .................................................................................................. 28 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 28 4.2.2 Test Instruments .........................................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF150626C12-2 Page No. 1 / 35 Report Format Version: 6.1.1 FCC Test Report Report No.: RF150626C12-2 FCC ID: ZQ6-AP6212SD Test Model: AP6212SD Received Date: June 26, 2015 Test Date: Aug. 27 to Sep. 03, 2015 Issued Date: July 29, 2016 Applicant: Ampak Technology Inc. Address: No1. Jen Ai Road. Hokou, Hsinchu, Taiwan,30352 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (3): E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: RF150626C12-2 Page No. 2 / 35 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal ................................................................................................................... 11 3.4 Description of Support Units ............................................................................................................. 12 3.4.1 Configuration of System under Test .................................................................................................. 12 3.5 General Description of Applied Standards ........................................................................................ 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 15 4.1.3 Test Procedures ................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 16 4.1.5 Test Setup .......................................................................................................................................... 17 4.1.6 EUT Operating Conditions ................................................................................................................. 17 4.1.7 Test Results ....................................................................................................................................... 18 4.2 Conducted Emission Measurement .................................................................................................. 22 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 22 4.2.2 Test Instruments ..........................................................................................................…

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: IN254LFP 001 Auftrags-Nr.: Order no.: 147013404 070 Seite 1 von 47 Page 1 of 47 Kunden-Referenz-Nr.: Client reference no.: 2009322 Auftragsdatum: Order date: 2025-01-24 Auftraggeber: Client: ABMRC, LLC 860 Blue Gentian Road, Suite 200, Eagan, Minnesota-55121, USA Prüfgegenstand: Test item: BiWaze Clear Bezeichnung / Typ-Nr.: Identification / Type no.: BK181 Serien -Nr.: KNS24A007 Serial no.: Auftrags-Inhalt: Order content: Testing and issue of Test Report with Grant Certificate Prüfgrundlage: Test specification: FCC Part15 SubpartC 15.247; 15.205; 15.207; 15.209 Wareneingangsdatum: Date of sample receipt: 2025-09-05 Prüfmuster-Nr.: Test sample no: A004085214-003 Prüfzeitraum: Testing period: 2025-09-05 - 2025-09-12 Ort der Prüfung: Place of testing: Wireless laboratory, Bangalore Prüflaboratorium: Testing laboratory: TÜV Rheinland (India) Pvt.Ltd., 27/B, 2nd Cross, Electronic City Phase1 Bangalore -560 100, India FCC Test site registration number: 496599 ISED Test site registration number: 27711 Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Naveen Kumar Muthyalapati Venkata genehmigt von: authorized by: X Signed by: Madhu Nagaraju Datum: Date: 2025-11-25 Ausstellungsdatum: Issue date: 2025-11-25 Stellung / Position: M.V.Naveen Kumar Senior Engineer Stellung / Position: Madhu K.N Assistant Manager Sonstiges / Other: FCC ID: 2ATX9-BK181A Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (India) Pvt. Ltd. # 27/B, 2nd Cross Road, Electronics City Phase 1, Bangalore – 560 100, INDIA. Mail: [email protected] ∙ Web: www.ind.tuv.com V101023IMEASR Produkte Products www.tuv.com Prüfbericht - Nr.: Test Report No.: IN254LFP 001 Seite 2 von 47 Page 2 of 47 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Ei…

Text truncated - open the document above for the full version.