2ATY8-IPASONP3Notebook Computer

1) FCC 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2）FCC 15.21 Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 3) FCC 15.105 For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This Notebook Computer meets the government's requirements for exposure to radio waves. The guide lines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Notebook Computer (FCC ID: 2ATY8-IPASONP3) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification is 0.243W/kg when properly worn on the body. This device was tested for typical body-worn operations with the back of the Notebook Computer kept 00mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 00cm separation distance between the user's body and the back of the Notebook Computer. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. very high volume, prolonged listening to a mobile phone can damage your hearing.

Wuhan Ipason Technology Co., Ltd 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Wuhan Ipason Technology Co., Ltd Address: 5th Floor, Multifunctional Building, No. 1, Ipason Avenue, Shekou Street, Huangpi District, Wuhan City, Hubei Province, China Product Name: Notebook Computer FCC ID: 2ATY8-IPASONP3 Model(s): IPASON P3 2.911(d)(5)(i) Equipment Type We, Wuhan Ipason Technology Co., Ltd (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: KATY LAU Date: 2023-03-16 Title: Engineer Company name: Wuhan Ipason Technology Co., Ltd NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Wuhan Ipason Technology Co., Ltd 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Wuhan Ipason Technology Co., Ltd Address: 5th Floor, Multifunctional Building, No. 1, Ipason Avenue, Shekou Street, Huangpi District, Wuhan City, Hubei Province, China Product Name: Notebook Computer FCC ID: 2ATY8-IPASONP3 Model(s): IPASON P3 2.911(d)(5)(ii) Applicant filing We, Wuhan Ipason Technology Co., Ltd (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: KATY LAU Date: 2023-03-16 Title: Engineer Company name: Wuhan Ipason Technology Co., Ltd NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Wuhan Ipason Technology Co., Ltd U.S. Agent Letter of Attestation To:FederalCommunicationsCommission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date:Apr-03-2023 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2ATY8-IPASONP3 Wuhan Ipason Technology Co., Ltd(“the applicant”) certifies that, as of the date of the filing of the application, THREE STONES MEDIA LLC(“the agent”) is our designated U.S. agent for service of process for the abovereference FCC ID. The applicant accepts to maintain an agent for service of process in the United States forno less than one year after either the grantee has permanently terminated all marketing and importation of theapplicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicialproceeding involving the equipment, whichever is later. The applicant further acknowledges it is ourresponsibility to inform the FCC whenever the agent information changes. THREE STONES MEDIA LLC ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: THREE STONES MEDIA LLC FRN: 0033401761 GC: 2A99E Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 Signature: Contact Person: Sijie Zhang Tel:+12679093692Email:[email protected] Applicant Company Name: Wuhan Ipason Technology Co., Ltd Address: 5th Floor, Multifunctional Building, No. 1, Ipason Avenue, Shekou Street, Huangpi District, Wuhan City, Hubei Province, China Signature: Contact Person: KATY LAU Tel: +86-13532691034 Email: [email protected]

Wuhan Ipason Technology Co., Ltd Agent Authorization Company: Wuhan Ipason Technology Co., Ltd Address: 5th Floor, Multifunctional Building, No. 1, Ipason Avenue, Shekou Street, Huangpi District, Wuhan City, Hubei Province, China Product Name: Notebook Computer Model Number(s): IPASON P3 Product Description: Notebook Computer We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-04-04 Name: KATY LAU Title: Engineer Company: Wuhan Ipason Technology Co., Ltd

Wuhan Ipason Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-04-04 Subject; Request for Long Term Confidentiality FCC ID: 2ATY8-IPASONP3 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description Tune-up Procedure SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: KATY LAU Title: Engineer

IPASON P3 External Photo EUT View EUT View EUT View EUT View EUT View EUT View EUT View

IPASON P3 Internal Photo EUT View EUT View EUT View EUT View ANT: BT/WIFI BT: 2402-2480MHz WIFI: 2412-2462MHz 5G WIFI: 5150MHz ~5250MHz 5725MHz ~5850MHz EUT View EUT View EUT View EUT View EUT View EUT View EUT View EUT View EUT View

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 45 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China SAR Test Report For Applicant Name: Wuhan Ipason Technology Co., Ltd. Address: 5th Floor, Multifunctional Building, No. 1, Ipason Avenue, Shekou Street, Huangpi District, Wuhan City, Hubei Province, China EUT Name: NotebookComputer Brand Name: N/A Model Number: IPASON P3 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230322R01201 Test Standards: 47 CFR Part 2.1093 IEEE1528-2013 IEEE C95.1-2019 KDB 447498 D01 KDB 447498 D04 KDB 865664 D01 KDB 865664 D02 KDB 248227 D01 KDB 616217 D04 KDB 690783 D01 FCC ID: 2ATY8-IPASONP3 Test Conclusion: Pass Test Date: 2023-03-24 Date of Issue: 2023-03-24 Prepared By: Monica Zhou / Project Engineer Date: 2023-03-24 Approved By: Ryan.CJ / EMC Manager Date: 2023-03-24 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230322R01201 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 45 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-03-24 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230322R01201 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 45 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction ............................................................................................................................................................................................... 4 1.1 Identification of Testing Laboratory ............................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location .................................................................................................................... 4 1.3 Laboratory Condition ..................................................................................................................................................................... 4 1.4 Announcement ............................................................................................................................................................................... 4 2. Product Information .................................................................................................................................................................................. 5 2.1 Application Information .................................................................................................................................................................. 5 2.2 Manufacturer Information .............................................................................................................................................................. 5 2.3 Factory Information ........................................................................................................................................................................ 5 2.4 General Description of Equipment under Test (EUT) ............................................................................................................... 5 2.5 Equipment under Test Ancillary Equipment ............................................................................................................................... 5 2.6 Technical Information .................................................................................................................................................................... 5 3. Summary of Test Results ........................................................................................................................................................................ 6 3.1 Test Standards ............................................................................................................................................................................... 6 3.2 Device Category and SAR Limit .................................................................................................................................................. 7 3.3 Test Result Summary .................................................................................................................................................................... 7 3.4 Test Uncertainty ............................................................................................................................................................................. 8 4. Measurement System ............................................................................................................................................................................ 10 4.1 Specific Absorption Rate (SAR) Definition ............................................................................................................................... 10 4.2 MVG SA…

Text truncated - open the document above for the full version.

Report No.: FCC022023-0679RF6 Page 1 of 74 Product Name: Notebook Computer Report No: FCC022023-0679RF6 Product Model: IPASON P3 Security Classification: Open Version: V1.0 Total Page: 74 TIRT Testing Report Prepared By: Checked By: Approved By: Stone Tang Randy Lv Daniel Chen Report No.: FCC022023-0679RF6 Page 2 of 74 FCC Radio Test Report FCC ID: 2ATY8-IPASONP3 This report concerns: Original Grant Equipment : Notebook Computer Brand Name : Test Model : IPASON P3 Series Model : N/A Applicant : Wuhan Ipason Technology Co., Ltd Address : 5th Floor, Multifunctional Building, No. 1, Ipason Avenue, Shekou Street, Huangpi District, Wuhan City, Hubei Province, China Manufacturer : Wuhan Ipason Technology Co., Ltd Address : 5th Floor, Multifunctional Building, No. 1, Ipason Avenue, Shekou Street, Huangpi District, Wuhan City, Hubei Province, China Date of Receipt : Mar. 01, 2023 Date of Test : Mar. 01, 2023~ Mar. 16, 2023 Issued Date : Apr. 06, 2023 Report Version : V1.0 Test Sample : Engineering Sample No.: 20230227002812 Standard(s) : FCC CFR Title 47, Part 15, Subpart C FCC KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10-2013 • The test result referred exclusively to the presented test model /sample. • Without written approval of TIRT Inc. the test report shall not reproduced except in full. Lab: Beijing TIRT Technology Service Co.,Ltd Shenzhen Add: 101, 3 # Factory Building, Gongjin Electronics Shatin Community, Kengzi Street, Pingshan District, Shenzhen, China TEL: +86-0755-27087573 Report No.: FCC022023-0679RF6 Page 3 of 74 Table of Contents Page REPORT ISSUED HISTORY 6 1 . SUMMARY OF TEST RESULTS 7 1.1 TEST FACILITY 8 1.2 MEASUREMENT UNCERTAINTY 8 1.3 TEST ENVIRONMENT CONDITIONS 9 2 . GENERAL INFORMATION 10 2.1 GENERAL DESCRIPTION OF EUT 10 2.2 DESCRIPTION OF TEST MODES 12 2.3 PARAMETERS OF TEST SOFTWARE 13 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 14 2.5 SUPPORT UNITS 14 3 . AC POWER LINE CONDUCTED EMISSIONS 15 3.1 LIMIT 15 3.2 TEST PROCEDURE 15 3.3 DEVIATION FROM TEST STANDARD 15 3.4 TEST SETUP 16 3.5 EUT OPERATING CONDITIONS 16 3.6 TEST RESULTS 16 4 . RADIATED EMISSIONS 17 4.1 LIMIT 17 4.2 TEST PROCEDURE 18 4.3 DEVIATION FROM TEST STANDARD 19 4.4 TEST SETUP 19 4.5 EUT OPERATING CONDITIONS 21 4.6 TEST RESULTS - 9 KHZ TO 30 MHZ 21 4.7 TEST RESULTS - 30 MHZ TO 1000 MHZ 21 4.8 TEST RESULTS - ABOVE 1000 MHZ 21 5 . NUMBER OF HOPPING FREQUENCY 22 5.1 LIMIT 22 5.2 TEST PROCEDURE 22 5.3 DEVIATION FROM STANDARD 22 5.4 TEST SETUP 22 5.5 EUT OPERATION CONDITIONS 22 Report No.: FCC022023-0679RF6 Page 4 of 74 Table of Contents Page 5.6 TEST RESULTS 22 6 . AVERAGE TIME OF OCCUPANCY 23 6.1 LIMIT 23 6.2 TEST PROCEDURE 23 6.3 DEVIATION FROM STANDARD 23 6.4 TEST SETUP 23 6.5 EUT OPERATION CONDITIONS 23 6.6 TEST RESULTS 23 7 . HOPPING CHANNEL SEPARATION 24 7.1 LIMIT 24 7.2 TEST PROCEDURE 24 7.3 DEVIATION FROM STANDARD 24 7.4 TEST SETUP 24 7.5 EUT OPERATION CONDITIONS 24 7.6 TEST RESULTS 24 8 . BANDWIDTH 25 8.1 LIMIT 25 8.2 TEST PROCEDURE 25 8.3 DEVIATION FROM STANDARD 25 8.4 TEST SETUP 25 8.5 EUT OPERATION CONDITIONS 25 8.6 TEST RESULTS 25 9 . MAXIMUM OUTPUT POWER 26 9.1 LIMIT 26 9.2 TEST PROCEDURE 26 9.3 DEVIATION FROM STANDARD 26 9.4 TEST SETUP 26 9.5 EUT OPERATION CONDITIONS 26 9.6 TEST RESULTS 26 10 . CONDUCTED SPURIOUS EMISSION 27 10.1 LIMIT 27 10.2 TEST PROCEDURE 27 10.3 DEVIATION FROM STANDARD 27 10.4 TEST SETUP 27 Report No.: FCC022023-0679RF6 Page 5 of 74 Table of Contents Page 10.5 EUT OPERATION CONDITIONS 27 10.6 TEST RESULTS 27 11 . MEASUREMENT INSTRUMENTS LIST 28 12 . EUT TEST PHOTO 30 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 32 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 34 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 35 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 37 APPENDIX E - NUMBER OF HOPPING FREQUENCY 46 APPENDIX F - AVERAGE TIME OF OCCUPANCY 48 APPENDIX G - HOPPING CHANNEL SEPARATION 52 APPENDIX H - BANDWIDTH 54 APPENDIX I - MAXIMUM OUTPUT POWER 62 APPENDIX J - CONDUCTED SPURIOUS EMISSION 66 APPENDIX K - DECLARATION FOR BLUETOOTH DEVICE 73 Report No.: FCC022023-0679RF6 Page 6 of 74 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note FCC022023-0679RF6 V1.0 Original Report. Apr. 06, 2023 Valid Report No.: FCC022023-0679RF6 Page 7 of 74 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC CFR Title 47, Part 15, Subpart C Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Conducted Emissions APPENDIX A PASS ------ 15.247(d) 15.205(a) 15.209(a) Radiated Emission APPENDIX B APPENDIX C APPENDIX D PASS ------ 15.247 (a)(1)(iii) Number of Hopping Frequency APPENDIX E PASS ------ 15.247 (a)(1)(iii) Average Time of Occupancy APPENDIX F PASS ------ 15.247(a)(1) Hopping Channel Separation APPENDIX G PASS ------ 15.247(a)(1) Bandwidth APPENDIX H PASS ------ 15.247(a)(1) Maximum Output Power APPENDIX I PASS ------ 15.247(d) Conducted Spurious Emission APPENDIX J PASS ------ 15.203 Antenna Requirement ------ PASS Note(2) Note: (1) “N/A” denotes test is not applicable in this test report (2) The device what use a permanently attached antenna were considered sufficient to comply with the provisions of 15.203. Report No.: FCC022023-0679RF6 Page 8 of 74 1.1 TEST FACILITY Company: Beijing TIRT Technology Service Co.,Ltd Shenzhen Address: 101, 3 # Factory Building, Gongjin Electronics Shatin Community, Kengzi Street, Pingshan District, Shenzhen, China CNAS Registration Number: CNAS L14158 A2LA Registration Number: 6049.01 FCC Accredited Lab. Designation Number: CN1309 FCC Test Firm Registration Number: 825524 Telephone: +86-0755-27087573 1.2 MEASUREMENT UNCERTAINTY ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)) The BTL measurement uncertainty as below table: Uncertainty Para…

Text truncated - open the document above for the full version.

深圳星源创科技有限公司 ShenZhenXingYuanChuangTechnologyCo.,Ltd 地址：深圳市宝安区福永镇福海街道塘尾股份商务大厦1506 Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] 规格承认书 ApprovalSheet 客户名称 Customer 思宇星 日期 Data 2022/12/10 产品名称 Product WiFi天线 客户机型 Models I1401-P3 料号 P/N F548-14RB-305 客户料号 CustomerP/N 规格描述 Specifications 黑色FPC；RF0.81四代端子黑色同轴线，L=305mm 供应商承认签印 VenderApprovedBy 客户承认签印 CustomerApprovedBy CheckedBy:CheckedBy: ApprovalBy:ApprovalBy: 文件修订履历表 版本 Version 修订内容 ReviseTheContent 修订人 Revused 核准 Approval 修订日期 Date 备注 Note 深圳星源创科技有限公司 ShenZhenXingYuanChuangTechnologyCo.,Ltd 地址：深圳市宝安区福永镇福海街道塘尾股份商务大厦1506 Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] Content NO.ProectPageNO. 1Specification3 2WiFiAntTestInformation4 ３ AntennaPlacement5 ４ TestData6~~8 ５ AntennaAssembly9 ６ Notes10 ７ InspectionStandard11 ８ OutgoingInspectionReport12 ９ PackingSpecification13 深圳星源创科技有限公司 ShenZhenXingYuanChuangTechnologyCo.,Ltd 地址：深圳市宝安区福永镇福海街道塘尾股份商务大厦1506 Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] Specification 1.1ElectricalProperties CharacteristicsSpecifications WorkingBand 2.4GWiFi; 5GWiFi AntennaFromPIFA Impedance50Ω PolarizationLinear PeakEffi 38%@2.4G; 28%@5G PeakGain [email protected]; 3.5dBi@5G 1.2PhysicalProperties CharacteristicsSpecifications OperatingTemp -10 °C ~+60 °C StorageTemp -10 °C ~+70 °C Humidity10~95%RH 深圳星源创科技有限公司 ShenZhenXingYuanChuangTechnologyCo.,Ltd 地址：深圳市宝安区福永镇福海街道塘尾股份商务大厦1506 Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] WiFiAntTestInformation 深圳星源创科技有限公司 ShenZhenXingYuanChuangTechnologyCo.,Ltd 地址：深圳市宝安区福永镇福海街道塘尾股份商务大厦1506 Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] AntennaPlacement 深圳星源创科技有限公司 ShenZhenXingYuanChuangTechnologyCo.,Ltd 地址：深圳市宝安区福永镇福海街道塘尾股份商务大厦1506 Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] TestData S11Parameter-VSWR EfficiencyTable（2.4G） 深圳星源创科技有限公司 ShenZhenXingYuanChuangTechnologyCo.,Ltd 地址：深圳市宝安区福永镇福海街道塘尾股份商务大厦1506 Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] EfficiencyTable（5G） 深圳星源创科技有限公司 ShenZhenXingYuanChuangTechnologyCo.,Ltd 地址：深圳市宝安区福永镇福海街道塘尾股份商务大厦1506 Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] RadiationPattern(2.4G) RadiationPattern(5G) BTTest 深圳星源创科技有限公司 ShenZhenXingYuanChuangTechnologyCo.,Ltd 地址：深圳市宝安区福永镇福海街道塘尾股份商务大厦1506 Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] AntennaAssembly 深圳星源创科技有限公司 ShenZhenXingYuanChuangTechnologyCo.,Ltd 地址：深圳市宝安区福永镇福海街道塘尾股份商务大厦1506 Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] Notes 深圳星源创科技有限公司 ShenZhenXingYuanChuangTechnologyCo.,Ltd 地址：深圳市宝安区福永镇福海街道塘尾股份商务大厦1506 Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] InspectionStandard 深圳星源创科技有限公司 ShenZhenXingYuanChuangTechnologyCo.,Ltd 地址：深圳市宝安区福永镇福海街道塘尾股份商务大厦1506 Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] OutgoingInspectionReport 深圳市星源创科技有限公司 出货检验报告 客户思宇星品名规格 主天线 出货数量 5 抽样数量 2 机型 I1401-P3 料号 F548-14RB-305 出货日期 2022/12/10 检验标准☑正常检验□加严检验□减量检验 抽样方式MIL-STD-105D（II）单次抽样接受限AQL:CR：0Maj：2.5Min：4.0 质量允收水平 CRAcc 0 MajACC 0 Min ACC 0 CRREJ 1 MajREJ 1 Min REJ 1 项目检验内容检验要求检验方法 检验结果判定 123 4 尺寸检验 线总长 305±3 直尺 305305 合格 FPC外形 8±0.3 卡尺 88 合格 FPC外形 41±0.3 卡尺 41.040.9 合格 项目检验内容检验要求检验方法缺陷描述 CRMajMin 判定 外观检验 线外皮外被有无刮伤现象目视无异常 000 合格 焊盘加锡无氧化、锡尖等现象目视无异常000合格 IPEX 无缺料，烈痕，色差，缩 水，烫伤，无氧化、变 色、变形脱线等不良现象 目视无异常000合格 电气特性 其它 最终判定☑OK□NG 表格编号： XYC-WF-PZ-001 深圳星源创科技有限公司 ShenZhenXingYuanChuangTechnologyCo.,Ltd 地址：深圳市宝安区福永镇福海街道塘尾股份商务大厦1506 Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] PackingSpecification

IPASON P3 Test Set-up Photo