2AU6R04359802.11be (WiFi 7) Triple-Radio PoE Access Point

U.S. Agent for Service of Process Attestation Federal Communications Commission Authorization and Evaluation Division U.S. Agent Company name: Zyxel Communications, Inc FRN: 0033426222 Contact Name: Shawn Rogers Street Address: 1130 North Miller Street Anaheim City/Province/Zip: CA 92806-2001 Telephone No: +1-714-632-0882 Email: [email protected] This letter is to confirm that we have accepted the responsibility to act as the designated U.S. Agent for service of process as required by §2.911(d)(7) on behalf of the Zyxel Communications Corporation noted below. U.S. Agent Signature: Date: 2026-01-21 Signed by (printed name): Shawn Rogers Applicant Company name: Zyxel Networks Corporation FRN: 0028988400 Grantee Code: 2AU6R Contact Name: Emma Bao Street Address: No.2, Industry East Road IX, Hsinchu Science Park City/Province/Zip: Hsinchu Taiwan Telephone No: 886 3 578-3942 Email: [email protected] This letter is to confirm that the Applicant has designated the U.S. Agent noted above for the purpose of accepting service of process on their behalf as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signature: Date: 2026-01-21 Signed by (printed name): Emma Bao

Rev 1/26/2023 (Zyxel Networks Corporation) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-24-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AU6R04359 [Zyxel Networks Corporation] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Zyxel Networks Corporation] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) Emma Bao Rev 1/26/2023 (Zyxel Networks Corporation) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date:02-24-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AU6R04359 [Zyxel Networks Corporation] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) Emma Bao

Zyxel Networks Corporation Declaration of Authorization We Name: Zyxel Networks Corporation Address: No.2 Industry East RD.IX, Hsinchu Science Park City: Hsinchu Country: Taiwan Declare that: Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3 Jinshagang 1 st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s): Product description: 802.11be (WiFi 7) Triple-Radio PoE Access Point Type designation: NWA240BE Trademark: ZYXEL FCC ID: 2AU6R04359 on our behalf. Date: 2026-02-24 City: Hsinchu Name: Emma Bao Function: Manager Signature: .

Zyxel Networks Corporation Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026.02.24 Subject; Request for Confidentiality FCC ID: 2AU6R04359 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software security description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Emma Bao Title:Manager

Zyxel Networks Corporation MiCOM Labs FCC sample DofC 2.0 Date: 24 Feb.,2026 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Subject: FCC ID: 2AU6R04359 To Whom It May Concern: We hereby attest to the fact that we have applied the Declaration of Conformity procedure for a Class B Computer Peripheral to the digital portion of this composite filing. The requirements identified in KDB 896810 and 47CFR 2.948(b) have been followed. A test report has been issued by [BTL Inc.（Dongguan）/ No.3, Jinshagang 1st Road, Shixia, Dalang Town,Dongguan, Guangdong, China.] and can be identified by report number [BTL-FCCP-1-2508C743/ BTL- FCCP-2-2508C743/ BTL-FCCP-3-2508C743/ BTL-FCCP-4-2508C743/ BTL-FCCP-5-2508C743]. Sincerely, Signature Emma Bao Manager Zyxel Networks Corporation No.2 Industry East RD.IX, Hsinchu Science Park, Hsinchu, Taiwan

Zyxel Networks Corporation No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Date: April 27, 2026 Subject: Enterprise Access Point and Non-Consumer Device Declaration for NWA240BE FCC ID: 2AU6R04359 To Whom it may concern, We, Zyxel Networks Corporation, are writing to clarify the intended use of the equipment in this application. We hereby certify that the device is designed and marketed as an enterprise-grade access point and is intended solely for non-residential, commercial use. Based on the Federal Communications Commission’s guidance regarding routers included in the Covered List, and evaluating the product against the definition of “consumer-grade routers” as referenced in NIST IR 8425A, we respectfully provide the following context regarding the intended design and function of the NWA240BE access point: Product Application and Environment The design of the NWA240BE is optimized for modern, device-dense commercial environments, such as offices, classrooms, hospitality venues, and retail spaces. Its primary intended function is to facilitate wireless connectivity within a local area network (LAN) architecture, and it is meant to be deployed within commercial settings Sincerely, Emma Bao / Manager Zyxel Networks Corporation Tel: 886 3 578-3942 # 88582 E-mail: [email protected]

FCC Software Configuration Control Declaration Rev1.1 Zyxel Networks Corporation FCC Software Configuration Control Declaration Date: February 24, 2026 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: 802.11be (WiFi 7) Triple-Radio PoE Access Point/ NWA240BE Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Emma Bao Date: 2026-02-24 Title: Manager Signature of applicant

Report No.: BTL-FCCP-5-2508C743 Project No.: 2508C743 Page 1 of 10 Report Version: R00 FCC Radio Evaluation Report FCC ID: 2AU6R04359 Report No. : BTL-FCCP-5-2508C743 Equipment : 802.11be (WiFi 7) Triple-Radio PoE Access Point Model Name : NWA240BE Brand Name : ZYXEL Applicant : Zyxel Networks Corporation Address : No.2 Industry East RD.IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Manufacturer : Zyxel Networks Corporation Address : No.2 Industry East RD.IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C FCC Rule Part(s) : 47 CFR § 2.1091 IEEE C95.1 Date of Receipt : 2025/9/25 Date of Evaluation : 2026/1/22 Issued Date : 2026/4/16 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Benny Cao, Engineer Approved by : Jerry Chuang, Manager BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-5-2508C743 Project No.: 2508C743 Page 2 of 10 Report Version: R00 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the Customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-5-2508C743 Project No.: 2508C743 Page 3 of 10 Report Version: R00 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-5-2508C743 R00 Original Report. 2026/4/16 Valid Report No.: BTL-FCCP-5-2508C743 Project No.: 2508C743 Page 4 of 10 Report Version: R00 1. LIMITS According to § 1.1310 Radiofrequency radiation exposure limits. (a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) of this part within the frequency range of 100 kHz to 6 GHz (inclusive). (b) The SAR limits for occupational/controlled exposure are 0.4 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 8 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit for occupational/controlled exposure is 20 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 6 minutes to determine compliance with occupational/controlled SAR limits. (c) The SAR limits for general population/uncontrolled exposure are 0.08 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 1.6 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit is 4 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 30 minutes to determine compliance with general population/uncontrolled SAR limits. (e) Limits for Maximum Permissible Exposure (MPE) to radiofrequency electromagnetic fields (Table 1). Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *(100) ≤6 3.0-30 1842/f 4.89/f *(900/f 2 ) <6 30-300 61.4 0.163 1.0 <6 300-1.500 f/300 <6 1.500-100.000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) <30 1.34-30 824/f 2.19/f *(180/f 2 ) <30 30-300 27.5 0.073 0.2 <30 300-1.500 f/1500 <30 1.500-100.000 1.0 <30 f = frequency in MHz. * = Plane-wave equivalent power density. Report No.: BTL-FCCP-5-2508C743 Project No.: 2508C743 Page 5 of 10 Report Version: R00 2. APPLIED EXEMPTION CRITERIA Refer to KDB 447498 D04, ticked item is applied: For RF Exposure Test Exemptions for Single Source: ☐ 1-mW Test Exemption Per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of s…

Text truncated - open the document above for the full version.