2AU6R04459802.11ax (WiFi 6) Dual-Radio Outdoor PoE Wireless Bridge

Zyxel Networks Corporation No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: May 22, 2026 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) FCC ID: 2AU6R04459 To whom it may concern, [Zyxel Networks Corporation] (“the applicant”) certifies that the equipment [FCC ID: 2AU6R04459] for which authorization is sought is not the equipment on the Covered List, as established pursuant to § 1.50002 of CFR Title 47, that is prohibited from obtaining an equipment authorization under this subpart. This includes equipment that: (1) Has been certified as a modular transmitter; or (2) Meets the modular transmitter requirements of § 15.212 of this chapter and could be certified as a modular transmitter. pursuant to section 2.903 resulting the recent adoption of FCC 25-71 (et al., ET Docket No. 21-232, Second Report and Order); or (3) Uncrewed aircraft systems (UAS) and UAS critical components produced in a foreign country and all communications and video surveillance equipment and services listed in Section 1709(a)(1) of the FY25 National Defense Authorization Act (Pub. L. 118-159) Applicant certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Applicant further certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software is installed in the equipment being certified. The above-referenced Covered List is published by the Public Safety and Homeland Security Bureau (PSHSB), pursuant to Section 1.50002 of the Commission’s rules. Sincerely, Emma Bao / Manager Zyxel Networks Corporation Tel: 886 3 578-3942 # 88582 E-mail: [email protected]

U.S. Agent for Service of Process Attestation Federal Communications Commission Authorization and Evaluation Division U.S. Agent Company name: Zyxel Communications, Inc FRN: 0033426222 Contact Name: Shawn Rogers Street Address: 1130 North Miller Street Anaheim City/Province/Zip: CA 92806-2001 Telephone No: +1-714-632-0882 Email: [email protected] This letter is to confirm that we have accepted the responsibility to act as the designated U.S. Agent for service of process as required by §2.911(d)(7) on behalf of the Zyxel Communications Corporation noted below. U.S. Agent Signature: Date: 2026-01-21 Signed by (printed name): Shawn Rogers Applicant Company name: Zyxel Networks Corporation FRN: 0028988400 Grantee Code: 2AU6R Contact Name: Emma Bao Street Address: No.2, Industry East Road IX, Hsinchu Science Park City/Province/Zip: Hsinchu Taiwan Telephone No: 886 3 578-3942 Email: [email protected] This letter is to confirm that the Applicant has designated the U.S. Agent noted above for the purpose of accepting service of process on their behalf as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signature: Date: 2026-01-21 Signed by (printed name): Emma Bao

Zyxel Networks Corporation No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Date: 2026/5/22 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: 2AU6R04459 Product name: 802.11ax (WiFi 6) Dual-Radio Outdoor PoE Wireless Bridge To whom it may concern: We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for FCC equipment authorization, including the signing of all documents relating to these matters. International Certification Corp. Address : No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Dist., TaoYuan City 333, Taiwan (R.O.C.) Name : Gary Chang Job Title : Manager e-mail : [email protected] Webs We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. Emma Bao / Manager Zyxel Networks Corporation Tel: 886 3 578-3942 # 88582 E-mail: [email protected]

Date: May 22, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: 2AU6R04459 To whom it may concern: Short-term confidentiality Pursuant to DA 04-1705 of the Commission’s pubic notice, in order to comply with the marketing regulations in 47CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after issue date ☒ Internal Photographs ☒ External Photographs ☒ User's manual ☒ Test Set up photo Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: ☒ Block Diagram ☒ Schematics ☒ Operational Description ☐ Bill of Materials ☐ Tune up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Emma Bao / Manager Zyxel Networks Corporation Tel: 886 3 578-3942 # 88582 E-mail: [email protected]

Zyxel Networks Corporation No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Date: May 22, 2026 Subject: Ad Hoc Mode Function Declaration FCC ID: 2AU6R04459 IC ID: 25830-04459 To Whom it may concern, We, Zyxel Networks Corporation declare that the device does not support any non-US channels and country code selection in all the operational mode(s). Regards, Emma Bao / Manager Zyxel Networks Corporation Tel: 886 3 578-3942 # 88582 E-mail: [email protected]

Zyxel Networks Corporation No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Date: May 26, 2026 Subject: Enterprise Access Point and Non-Consumer Device Declaration for NWA55AX PTP FCC ID: 2AU6R04459 To Whom it may concern, We, Zyxel Networks Corporation, are writing to clarify the intended use of the equipment in this application. We hereby certify that the device is designed and marketed as an enterprise-grade access point and is intended solely for non-residential, commercial use. Based on the Federal Communications Commission’s guidance regarding routers included in the Covered List, and evaluating the product against the definition of “consumer-grade routers” as referenced in NIST IR 8425A, we respectfully provide the following context regarding the intended design and function of the NWA55AX PTP access point: Product Application and Environment The design of the NWA55AX PTP is optimized for for connecting campuses, farms, warehouses, or remote outbuildings. Its primary intended function is to facilitate wireless connectivity within a local area network (LAN) architecture, and it is meant to be deployed within commercial settings Sincerely, Emma Bao / Manager Zyxel Networks Corporation Tel: 886 3 578-3942 # 88582 E-mail: [email protected]

How to view the Regulatory Information? Step 1: Open a browser and go to https://192.168.1.2 or http://DHCP- assigned IP. Step 2: Log in to the Web Configurator. (The default Username and Password are on the device label.) Step 3: Click the menu icon in the left navigation panel and go to Maintenance > Legal and Regulatory to view applicable regulatory information for your Zyxel Device. Note: The Regulatory Information is only accessible through the Web Configurator. FCC ID: 2AU6R04459

FCC ID: 2AU6R04459 Page 1 of 2 E-Label Declaration 2.935 Electronic labeling of radiofrequency devices (a) Any radiofrequency device equipped with an integrated electronic display screen, or a radiofrequency device without an integrated screen that can only operate in conjunction with a device that has an electronic display screen, may display on the electronic display the FCC Identifier, any warning statements, or other information that the Commission's rules would otherwise require to be shown on a physical label attached to the device. This product displays the FCC warning statements and regulatory information electronically on the Web Configurator, which can be accessed through a web browser. (b) Devices displaying their FCC Identifier, warning statements, or other information electronically must make this information readily accessible on the electronic display. Users must be provided with prominent instructions on how to access the information in the operating instructions, inserts in packaging material, or other easily accessible format at the time of purchase. The access instructions may also be provided via the product-related Web site, if such a Web site exists; the packaging material must provide specific instructions on how to locate the Web site information, and a copy of these instructions must be included in the application for equipment certification Users are provided with prominent instructions on how to access the regulatory information. Detailed instructions are clearly documented in the **"Legal and Regulatory"** chapter of the User Manual. (c) Devices displaying their FCC Identifier, warning statements, or other information electronically must permit access to the information without requiring special codes, accessories or permissions and the access to this information must not require more than three steps from the device setting menu. The number of steps does not include those steps for use of screen locks, passcodes or similar security protection designed to control overall device access Access to the electronic information does not require any special codes, accessories, or permissions. The information can be accessed in no more than three steps from the device setting menu. The Standard Operating Procedure (SOP) to access the e-label is as follows: Step 1: Open a browser and go to https://192.168.1.2 or http://DHCP-assigned IP. Step 2: Log in to the Web Configurator. (The default Username and Password are on the device label.) Step 3: Click the menu icon in the left navigation panel and go to Maintenance > Legal and Regulatory to view applicable regulatory information for your Zyxel Device. FCC ID: 2AU6R04459 Page 2 of 2 (d) The electronically displayed FCC Identifier, warning statements, or other information must be displayed electronically in a manner that is clearly legible without the aid of magnification; The electronically displayed FCC warning statements and regulatory information accessed via the Web Configurator are clearly legible without the aid of magnification. (e) The necessary label information must be programmed by the responsible party and must be secured in such a manner that third-parties cannot modify it. The necessary label information is pre-programmed by the responsible party. The device firmware (FW) is encrypted and strictly secured to prevent unauthorized access, ensuring that third parties cannot modify the regulatory information. (f) (f) Devices displaying their FCC Identifier, warning statements, or other information electronically must also be labeled,either on the device or its packaging, with the FCC Identifier or other information (such as a model number and identification of a Web page that hosts the relevant regulatory information) that permits the devices to be identified at the time of importation, marketing, and sales as complying with the FCC's equipment authorization requirements. Devices can be labeled with a stickon label, printing on the packaging, a label on a protective bag, or by similar means. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. In addition to the e-label, the FCC ID is also physically printed/labeled directly on the product itself to permit identification at the time of importation, marketing, and sales. This physical label is permanent and cannot be removed. Emma Bao / Manager Zyxel Networks Corporation Tel: 886 3 578-3942 # 88582 E-mail: [email protected]

Rear of the EUT label here

Report No.: FA612001 Page : 1 of 7 Report Version: Rev. 01 FCC RF Exposure Report FCC ID : 2AU6R04459 Equipment : 802.11ax (WiFi 6) Dual-Radio Outdoor PoE Wireless Bridge Model No. : NWA55AX PTP Brand Name : ZYXEL Applicant : Zyxel Networks Corporation Address : No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Standard : 47 CFR FCC Part 2.1091 Received Date : Jan. 20, 2026 Tested Date : Apr. 16 ~ Apr. 30, 2026 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Manager Gary Chang / Manager Report No.: FA612001 Page : 2 of 7 Report Version: Rev. 01 Table of Contents 1 MPE EVALUATION OF MOBILE DEVICES ......................................................................................... 4 1.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE............................................. 4 1.2 MPE EVALUATION FORMULA ............................................................................................................. 4 1.3 REFERENCE GUIDANCE ..................................................................................................................... 4 1.4 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE ................................... 4 1.5 MEASUREMENT UNCERTAINTY ......................................................................................................... 4 1.6 MPE EVALUATION RESULTS .............................................................................................................. 5 1.7 MPE EVALUATION OF SIMULTANEOUS TRANSMISSION ................................................................ 6 2 TEST LABORATORY INFORMATION ................................................................................................. 7 Report No.: FA612001 Page : 3 of 7 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FA612001 Rev. 01 Initial issue May 26, 2026 Report No.: FA612001 Page : 4 of 7 Report Version: Rev. 01 1 MPE EVALUATION OF MOBILE DEVICES 1.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE Frequency Range (MHz) Power Density (mW /cm 2 ) Averaging Time (minutes) 300~1500 F/1500 30 1500~100000 1.0 30 1.2 MPE EVALUATION FORMULA Pd = 2 * * 4 R Pi Pt Where Pd= Power density in mW/cm 2 Pt= EIRP in mW Pi= 3.1416 R= Measurement distance 1.3 REFERENCE GUIDANCE 447498 D01 General RF Exposure Guidance v06 1.4 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE None 1.5 MEASUREMENT UNCERTAINTY The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)). Parameters Uncertainty Conducted power ±0.808 dB Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Report No.: FA612001 Page : 5 of 7 Report Version: Rev. 01 1.6 MPE EVALUATION RESULTS Non-beamforming mode Frequency Range (MHz) Maximum Conducted Power (dBm) Maximum Tune Up Limit (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) *Ratio Pass / Fail 2412-2462 23.07 23.5 1.86 27 0.038 1 0.038 Pass 5180-5240 29.20 29.5 9.87 27 0.944 1 0.944 Pass 5260-5320 20.02 20.5 9.87 27 0.119 1 0.119 Pass 5500-5720 20.14 20.5 9.74 27 0.115 1 0.115 Pass 5745-5825 29.51 30 9.39 27 0.949 1 0.949 Pass Beamforming mode Frequency Range (MHz) Maximum Conducted Power (dBm) Maximum Tune Up Limit (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) *Ratio Pass / Fail 5180-5240 26.19 26.5 9.73 27 0.458 1 0.458 Pass 5260-5320 17.01 17.5 9.73 27 0.058 1 0.058 Pass 5500-5720 17.13 17.5 9.72 27 0.058 1 0.058 Pass 5745-5825 26.50 27 9.28 27 0.464 1 0.464 Pass Report No.: FA612001 Page : 6 of 7 Report Version: Rev. 01 1.7 MPE EVALUATION OF SIMULTANEOUS TRANSMISSION Non-beamforming mode Mode Max Ratio of Each Mode 2.4 GHz Wi-Fi 0.038 5 GHz Wi-Fi 0.949 Sum 0.987 Limit 1 Pass / Fail Pass Beamforming mode Mode Max Ratio of Each Mode 2.4 GHz Wi-Fi 0.038 5 GHz Wi-Fi 0.464 Sum 0.502 Limit 1 Pass / Fail Pass Report No.: FA612001 Page : 7 of 7 Report Version: Rev. 01 2 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corporation (EMC and Wireless Communication Laboratory), it is our definitive objective is to institute long term, trust-based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff. Our Test sites are located at Linkou District and Kwei Shan District. Location map can be found on our website https://www.icertifi.com.tw. Linkou Kwei Shan Kwei Shan Site II Tel: 886-2-2601-1640 Tel: 886-3-271-8666 Tel: 886-3-271-8640 No.30-2, Ding Fwu Tsuen, Lin Kou District, New Taipei City, Taiwan (R.O.C.) No.3-1, Lane 6, Wen San 3rd St., Kwei Shan Dist., Tao Yuan City 33381, Taiwan (R.O.C.) No.2-1, Lane 6, Wen San 3rd St., Kwei Shan Dist., Tao Yuan City 33381, Taiwan (R.O.C.) No.14-1, Lane 19, Wen San 3rd St., Kwei Shan Dist., Tao Yuan City 33381, Taiwan (R.O.C.) Zhonghe Tel: 886-2-2222-0288 1F, No. 6,…

Text truncated - open the document above for the full version.

Report No.: FR612001AN Page : 1 of 27 Report Version: Rev. 01 FCC Test Report FCC ID : 2AU6R04459 Equipment : 802.11ax (WiFi 6) Dual-Radio Outdoor PoE Wireless Bridge Model No. : NWA55AX PTP Brand Name : ZYXEL Applicant : Zyxel Networks Corporation Address : No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Standard : 47 CFR FCC Part 15.407 Received Date : Jan. 20, 2026 Tested Date : Apr. 16 ~ Apr. 30, 2026 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Manager Gary Chang / Manager Report No.: FR612001AN Page : 2 of 27 Report Version: Rev. 01 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Local Support Equipment List .............................................................................................................. 10 1.3 Test Setup Chart .................................................................................................................................. 10 1.4 The Equipment List .............................................................................................................................. 11 1.5 Test Standards ..................................................................................................................................... 12 1.6 Reference Guidance ............................................................................................................................ 12 1.7 Deviation from Test Standard and Measurement Procedure ............................................................... 12 1.8 Measurement Uncertainty .................................................................................................................... 13 2 TEST CONFIGURATION ..................................................................................................................... 14 2.1 Testing Facility ..................................................................................................................................... 14 2.2 The Worst Test Modes and Channel Details ....................................................................................... 15 3 TRANSMITTER TEST RESULTS ....................................................................................................... 17 3.1 Emission Bandwidth ............................................................................................................................. 17 3.2 Conducted Output Power ..................................................................................................................... 18 3.3 Power Spectral Density ........................................................................................................................ 20 3.4 Unwanted Emissions ............................................................................................................................ 22 3.5 Frequency Stability ............................................................................................................................... 25 3.6 AC Power Line Conducted Emissions ................................................................................................. 26 4 TEST LABORATORY INFORMATION ............................................................................................... 27 Appendix A. Emission Bandwidth Appendix B. Conducted Output Power Appendix C. Power Spectral Density Appendix D. Unwanted Emissions Appendix E. Frequency Stability Appendix F. AC Power Line Conducted Emissions Report No.: FR612001AN Page : 3 of 27 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FR612001AN Rev. 01 Initial issue May 26, 2026 Report No.: FR612001AN Page : 4 of 27 Report Version: Rev. 01 Summary of Test Results FCC Rules Test Items Measured Result 15.207 AC Power Line Conducted Emissions [dBuV]: 0.150MHz 49.99 (Margin -16.01dB) - QP Pass 15.407(b) 15.209 Unwanted Emissions [dBuV/m at 3m]: 5446.92MHz 53.88 (Margin -0.12dB) - AV Pass 15.407(a) Emission Bandwidth Meet the requirement of limit Pass 15.407(e) 6dB bandwidth Meet the requirement of limit Pass 15.407(a) Conducted Output Power Max Power [dBm]: Non-beamforming mode 5150~5250MHz: 29.20 5250~5350MHz: 20.02 5470~5725MHz: 20.14 5725~5850MHz: 29.51 Beamforming mode 5150~5250MHz: 26.19 5250~5350MHz: 17.01 5470~5725MHz: 17.13 5725~5850MHz: 26.50 Pass 15.407(a) Power Spectral Density Meet the requirement of limit Pass 15.407(g) Frequency Stability Meet the requirement of limit Pass 15.203 Antenna Requirement Meet the requirement of limit Pass Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Report No.: FR612001AN Page : 5 of 27 Report Version: Rev. 01 1 General Description 1.1 Information 1.1.1 Specification of the Equipment under Test (EUT) RF General Information Frequency Range (MHz) IEEE Std. 802.11 Ch. Freq. (MHz) Channel Number Transmit Chains (N TX ) Data Rate / MCS 5150-5250 5250-5350 5470-5725 5725-5850 a 5180-5240 5260-5320 5500-5720 5745-5825 36-48 [4] 52-64 [4] 100-144 [12] 149-165 [5] 2 6-54 Mbps 5150-5250 5250-5350 5470-5725 5725-5850 n (HT20) …

Text truncated - open the document above for the full version.

Report No.: FR612001CO Page : 1 of 12 Report Version: Rev. 01 FCC Co-Location Test Report FCC ID : 2AU6R04459 Equipment : 802.11ax (WiFi 6) Dual-Radio Outdoor PoE Wireless Bridge Model No. : NWA55AX PTP Brand Name : ZYXEL Applicant : Zyxel Networks Corporation Address : No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Standard : 47 CFR FCC Part 15.247 47 CFR FCC Part 15.407 Received Date : Jan. 20, 2026 Tested Date : Apr. 23 ~ Apr. 24, 2026 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Manager Gary Chang / Manager Report No.: FR612001CO Page : 2 of 12 Report Version: Rev. 01 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 The Equipment List ................................................................................................................................ 6 1.3 Test Standards ....................................................................................................................................... 7 1.4 Reference Guidance .............................................................................................................................. 7 1.5 Deviation from Test Standard and Measurement Procedure ................................................................. 7 1.6 Measurement Uncertainty ...................................................................................................................... 7 2 TEST CONFIGURATION ....................................................................................................................... 8 2.1 Testing Facility ....................................................................................................................................... 8 2.2 The Worst Test Modes and Channel Details ......................................................................................... 8 3 TRANSMITTER TEST RESULTS ......................................................................................................... 9 3.1 Unwanted Emissions into Restricted Frequency Bands ........................................................................ 9 4 TEST LABORATORY INFORMATION ............................................................................................... 12 Appendix A. Unwanted Emissions Into Restricted Frequency Bands Report No.: FR612001CO Page : 3 of 12 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FR612001CO Rev. 01 Initial issue May 26, 2026 Report No.: FR612001CO Page : 4 of 12 Report Version: Rev. 01 Summary of Test Results FCC Rules Test Items Measured Result 15.247(d) 15.407(b) 15.209 Radiated Emissions [dBuV/m at 3m]: 38.73MHz 35.53 (Margin -4.47dB) - PK Pass Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Report No.: FR612001CO Page : 5 of 12 Report Version: Rev. 01 1 General Description 1.1 Information 1.1.1 Specification of the Equipment under Test (EUT) Operating Frequency 802.11b/g/n/ax: 2412 MHz ~ 2462 MHz 802.11a/n/ac/ax: 5180 MHz ~ 5240 MHz; 5260 MHz ~ 5320 MHz; 5500 MHz ~ 5720 MHz, 5745 ~ 5825 MHz Modulation Type 802.11b: DSSS (DBPSK / DQPSK / CCK) 802.11a/g/n/ac/ax: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM / 1024QAM) 1.1.2 Antenna Details WiFi 2.4G Brand Model Type Connector Antenna Gain (dBi) Lynwave Ant. 3 PIFA iPex 1.86 WiFi 5G Brand Model Type Connector Operating Frequencies (MHz) / Antenna Gain (dBi) 5150~5250 5250~5350 5470~5725 5725~5850 Lynwave Ant. 1 Patch iPex 9.87 9.87 9.74 9.39 Lynwave Ant. 2 Patch iPex 9.59 9.59 9.7 9.17 1.1.3 Power Supply Type of Equipment under Test (EUT) Power Supply Type 48Vdc from PoE Report No.: FR612001CO Page : 6 of 12 Report Version: Rev. 01 1.2 The Equipment List Test Item Radiated Emission Test Site 966 chamber3 / (03CH03-WS) Tested Date Apr. 23 ~ Apr. 24, 2026 Instrument Brand Model No. Serial No. Calibration Date…

Text truncated - open the document above for the full version.