2AUDO-F16SF16GF16A3 in 1 Wireless Charger

FCC Requirement Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ShenzhenItianTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:November8,2023 FCCID:2AUDO-F16SF16GF16A Ref.#1:AttestationStatementsPart2.911(d)(5)(i)Filing ShenzhenItianTechnologyCo.,Ltd.certifiesthattheequipmentforwhichauthorizationis soughtisnot“covered”equipmentprohibitedfromreceivinganequipmentauthorization pursuanttosection2.903oftheFCCrules. Ref.#2:AttestationStatementsPart2.911(d)(5)(ii)Filing ShenzhenItianTechnologyCo.,Ltd.certifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredListasanentityproducing “covered”equipment. Applicant:ShenzhenItianTechnologyCo.,Ltd. Address:6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China ContactPerson:JiankunZhao Tel.:15814454134 Email:[email protected] Sincerely, Signature:

ShenzhenItianTechnologyCo.,Ltd. Address：6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China FRN:0028652667 Date:2023-11-08 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2AUDO-F16SF16GF16A ShenzhenItianTechnologyCo.,Ltd.certifiesthat,asofthedateofthefilingoftheapplication, ClevelandInternationalTradeAgency.isourdesignatedU.S.agentforserviceofprocessfor theabovereferencedFCCID.ShenzhenItianTechnologyCo.,Ltd.acceptstomaintainan agentfornolessthanoneyearafterthegranteehasterminatedallmarketingandimportation ortheconclusionofanyCommission-relatedproceedinginvolvingtheequipment. ClevelandInternationalTradeAgencyaccepts,asofthedateofthefilingoftheapplication, theobligationofthedesignatedU.S.agentforserviceofprocessfortheabovereferenced FCCID. DesignatedU.S.AgentInformation: Name:ClevelandInternationalTradeAgency Address:4033STClairAve,Cleveland,OH44103,USA FRN:0033401837 ContactPerson:BeckyDeng Tel.:216-600-0606 Email:[email protected] Sincerely, SignedonbehalfofShenzhenItian TechnologyCo.,Ltd. SignedonbehalfofClevelandInternational TradeAgency signaturesignature Name:JiankunZhaoName:BeckyDeng Title:GeneralManagerTitle:Manager Date:2023-11-6Date:2023-11-6

· Page4of1 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED 东莞市石碣镇西沙路2号 2XishaRoad,ShijieTown,DongguanCity Address: 东莞市石碣镇西沙路 2 号 Tel ： 86-76986018114Fax ： 86-76986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-08-020 产品规格书 PRODUCTSPECIFICATION · 拟制 PREPAREDBY 跟单员 MERCHANDISER 工程审核 ENGINEER CHECKEDBY 制程审核 PRODUCTION CHECKDEDBY 批准 APPROVEDBY 客户：深圳市翊天科技有限公司 CUSTOMER:_______ShenzhenItianTechnologyCo.,LTD 客户料号： CUSTP/N:___________________________________________________________________ 金赞料号： KCP/N:____________________________________________________________________ 名称型号：三星手表线圈（不带磁铁2.2mm10.5uH）-线长8MM SamsungWatchcoil(2.2mm10.5uHwithoutmagnet)-linelength8MM （13.9*24.6*0.06*65P*15TS*8MM） DESE:____________________________________________________________________ 日期：2023.3.24 DATE:____________________________________________________________________ 版本：A.1 VERSION:____________________________________________________________________ （客户承认受领印）ACCEPTANCESTAMP Page4of 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel：86-76986018114Fax：86-76986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-08-020 13.9*24.6*0.06*65P*15TS*8MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 2 王云帆 版本 Rev. 变更前 BeforeChange 变更后内容 DESCRIPTION(ContentOrReasonForChanged) 日期 Date 修订者 Revisor A.0--新发行（InitialRelease）2023/3/20王云帆 A.1 带3M双面胶 With3M double-sided tape 无3M双面胶 No3Mdouble-sidedtape 2023/3/24王云帆 Page4of 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel：86-76986018114Fax：86-76986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-08-020 13.9*24.6*0.06*65P*15TS*8MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 3 1.产品外形尺寸（OVERALLDIMENSIONSOFPRODUCTS): 单位 (Unit): 毫米 (mm) Page4of 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel：86-76986018114Fax：86-76986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-08-020 13.9*24.6*0.06*65P*15TS*8MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 4 PS:1.C为磁外引线长度；8TS贴向磁片；F为磁铁外径；磁铁按N极朝上，S极朝下； PS:1.Cisthelengthofthemagneticouterlead;8TSattacheddisk;Fistheouterdiameterofthe magnet;MagnetpressNpoleup,Spoledown; 圈数 Turns 线径 WireDia. 绕线方式疏/ 密 Wdg.Type Spred/Close 绕线方向 Wdg.Direction 相交是/ 否 Intersect Yes/Not 线圈正/反贴 Coil Positive/AntiPaste 15（7+8） TS 0.06*65P丝包线 （Silk-CoveredWire） 密绕 （Close） 正反绕 （Anticlockwise） 是 （Yes） 8圈贴磁片 所有材料要求合格ROHS标准 2.电气特性（ELECTRICALCHARACTERISTICS): 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±10% 材料清单（BILLOFMATERIAIS): ABCDEGH 4±13±18+2/-013.9±0.524.6±11.44±0.152.73±0.15 IJZZ2KM 2.2±0.153.4±0.48.0±0.513.2±0.527±126±1 参考数据：线圈1.44H（不包含进线）；胶布：0.15H（接口处为双层）；胶水：0.12H；磁片凹陷厚度1.73）；总 材料厚度总计；3.59H（不包含缝隙和进线） Referencedata:coil1.44H(excludingincomingwire);Tape:0.15H(doublelayerattheinterface);Glue: 0.12H;Discdipthickness1.73);Totalmaterialthickness;3.59H(excludinggapsandinletlines) 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS 1INDS-F 线圈加磁片:10.5uH±10% 100kHz/VLCZMETER1062 Page4of 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel：86-76986018114Fax：86-76986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-08-020 13.9*24.6*0.06*65P*15TS*8MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 5 序号 number 材料名称 Materialname 品名描述 Description 物料代码 MaterialCode 厂商代码 Vendorcode 1 线材/wirerod0.06*65P丝包线 0.06*65Psilk-coveredwire SBX-2U-F-0047ZY 2 罐形磁片/Can diskette P27*26*2.73内孔8.0（带孔，带缺口） P27*26*2.73Innerhole8.0(with holesandnotches) GCP-Y-0054HQK 3 胶布/adhesive plaster 3MM

Page1of4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED 东莞市石碣镇西沙路2号 2XishaRoad,ShijieTown,DongguanCity Address:东莞市石碣镇西沙路2号2XishaRoad,ShijieTown,DongguanCity Tel ： 86-076986018114Fax ： 86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 东莞市金赞智能科技有限公司 产品规格书 PRODUCTSPECIFICATION 拟制 PREPAREDBY 跟单员 MERCHANDISER 工程审核 ENGINEER CHECKEDBY 制程审核 PRODUCTION CHECKDEDBY 批准 APPROVEDBY 王云帆 客户：深圳市翊天科技有限公司 CUSTOMER:_ShenzhenItianTechnologyCo.,LTD______________ 客户料号：061.001 CUSTP/N:____________________________________________________________________ 金赞料号：061.001 KCP/N:____________________________________________________________________ 名称型号：（通用磁吸线圈-开槽线长40MM）20.5*42*0.08*105P*10TS*40MM DESE:(Universalmagneticcoil-slottedlinelength40MM) 20.5*42*0.08*105P*10TS*40MM 日期：2023.3.23 DATE:____________________________________________________________________ 版本：A.0 VERSION:____________________________________________________________________ （客户承认受领印）ACCEPTANCESTAMP Pageof4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel：86-076986018114Fax：86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 规格内容 061.001 20.5*42*0.08*105P*10TS*40MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 2 版本 Rev. 变更前 BeforeChange 变更后内容 DESCRIPTION(ContentOrReasonForChanged) 日期 Date 修订者 Revisor A.0--新发行（InitialRelease）2023/3/23王云帆 Pageof4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel：86-076986018114Fax：86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 规格内容 061.001 20.5*42*0.08*105P*10TS*40MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 3 1.产品外形尺寸（OVERALLDIMENSIONSOFPRODUCTS): 单位(Unit):毫米(mm) PS:1.（F）为磁外引线长度；2.（H）包含进线，不包含离型纸 3.（进出线部分如图）线圈4分之一不打胶：方便客户穿5MM灯板排线4：线圈内孔无溢胶（避免灯板突起） 圈数 Turns 线径 WireDia. 绕线方式疏/密 Wdg.Type Spred/Close 绕线方向 Wdg.Direction 相交是/否 Intersect Yes/Not 线圈正/反贴 Coil Positive/AntiPaste 10TS 0.08*105P小线径丝包 线（Silk-CoveredWire） 密绕（Close） 逆时针 （Anticlockwise） 是（Yes）反贴（Anti/-Paste） ABCDEFGHI 5.3±0.520.5±0.542±0.544+0/-13±140±21.2±0.052.6MAX10±2 Pageof4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel：86-076986018114Fax：86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 规格内容 061.001 20.5*42*0.08*105P*10TS*40MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 4 所有材料要求合格ROHS标准 2.电气特性（ELECTRICALCHARACTERISTICS): 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±10% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS 1INDS-F 线圈/coil：3.6uH±10% 100kHz/VLCZMETER1062 2INDS-F 线圈加磁片/Coiland diskette：6.3uH±10% 100kHz/VLCZMETER1062 3.材料清单（BILLOFMATERIAIS): 序号 NO. 材料名称 Materialname 品名描述 Description 物料代码 MaterialCode 厂商代码 Vendorcode 1 线材/wirerod0.08*105P小线径丝包线 SBX-2U-F-0011ZY 2 铁氧体 /ferrite G44（+0/-1）*5.3*1.0（+0/-0.1）H （带孔，带双槽L槽） GCP-T-0077LX 3 双面胶/double facedadhesive tape 42*5.3*0.08H（带孔，带手撕） 42*5.3*0.08H(withhole,withhand tear) SMJ-00064 NR 4 胶水/glueJS-E7202（加稠）白胶 JS-E7202(thickened)whiteglue E7202WHZY Pageof4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel：86-076986018114Fax：86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 规格内容 061.001 20.5*42*0.08*105P*10TS*40MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 5 5 锡条/tinbar环保无铅焊锡条 Environmentallyfriendlylead-free solderbar 无铅高温锡条 Lead-freehigh temperaturetin strip XC

ShenzhenItianTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:November8,2023 Subject;RequestforConfidentiality FCCID:2AUDO-F16SF16GF16A ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram OperationalDescription Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:JiankunZhao Title:GeneralManager

ShenzhenItianTechnologyCo.,Ltd. ModelConfirmationLetter We,ShenzhenItianTechnologyCo.,Ltd.certifytheproduct: 3in1WirelessCharger ModelNo.:F16S,F16G,F16A Theirelectricalcircuitdesign,layout,componentsusedandinternalwiringareidentical, Onlytheappearanceandcoloroftheproductsaredifferent. Signiture: GranteeContact:JiankunZhao CompanyName:ShenzhenItianTechnologyCo.,Ltd. Date:October31,2023

EffectiveDate:April2,2020QSF7.6.4-8–AgentAuthorizationLetterTemplatePage1of1 RevisionDate:Revision:0 ShenzhenItianTechnologyCo.,Ltd. Date:November8,2023 ProductModelNumber:F16S，F16G，F16A FCCID：2AUDO-F16SF16GF16A Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C.CanadaV5J5K5to actonourbehalfonallmattersconcerningtheabovenamedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatORGANIZATION.isallowedtoforwardallinformationrelatedtotheapproval projecttotheappliedcertificationbodyandtothenotificationentitiesandtodiscussanyissues concerningtheapprovalapplication.AnyandallactscarriedoutbyORGANIZATION.onour behalfshallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:GeneralManager Email:[email protected] Telephone:15814454134 Onbehalfof:ShenzhenItianTechnologyCo.,Ltd.

Externalphotos

F16SF16GF16A

Internalphotos

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 RFExposureEvaluationReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlytothesample(s) tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.: CQASZ20231001943E-02 Applicant:ShenzhenItianTechnologyCo.,LTD AddressofApplicant:6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China EquipmentUnderTest(EUT): Product:3in1WirelessCharger ModelNo.:F16S,F16G,F16A TestModelNo.:F16S BrandName:ITIAN FCCID:2AUDO-F16SF16GF16A Standards:47CFRPart1.1307 47CFRPart1.1310 KDB680106D01RFExposureWirelessChargingBaseAppv04r01 DateofReceipt:2023-10-27 DateofTest:2023-10-27to2023-11-21 DateofIssue: 2023-11-21 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (JoeWang) ReviewedBy: (TimoLei) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231001943E-02 Page:2of10 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20231001943E-02Rev.01 Initialreport 2023-11-21 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231001943E-02 Page:3of10 2Contents Page 1VERSION............................................................................................................................................................................2 2CONTENTS........................................................................................................................................................................3 ..................................................................................................................................................................................................3 3GENERALINFORMATION..............................................................................................................................................4 3.1CLIENTINFORMATION...................................................................................................................................................4 3.2GENERALDESCRIPTIONOFEUT...................................................................................................................................4 3.3PRODUCTSPECIFICATIONSUBJECTIVETOTHISSTANDARD...........................................................................................4 3.4TESTENVIRONMENT......................................................................................................................................................5 3.5DESCRIPTIONOFSUPPORTUNITS..................................................................................................................................5 3.6TESTLOCATION.............................................................................................................................................................6 3.7TESTFACILITY...............................................................................................................................................................6 3.8EQUIPMENTLIST............................................................................................................................................................6 4RFEXPOSUREEVALUATION.......................................................................................................................................7 4.1RFEXPOSURECOMPLIANCEREQUIREMENT.................................................................................................................7 4.1.1Limits....................................................................................................................................................................7 4.1.2TestProcedure...................................................................................................................................................7 4.1.3TestSetup...........................................................................................................................................................8 4.1.4TestResults........................................................................................................................................................8 APPENDIXA:PHOTOGRAPHSOFTESTSETUP.....................................................................................................10 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231001943E-02 Page:4of10 3GeneralInformation 3.1ClientInformation Applicant: ShenzhenItianTechnologyCo.,LTD AddressofApplicant: 6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China Manufacturer: ShenzhenItianTechnologyCo.,LTD AddressofManufacturer: 6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China Factory:ShenzhenItianTechnologyCo.,LTD AddressofFactory:6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China 3.2GeneralDescriptionofEUT ProductName: 3in1WirelessCharger ModelNo.: F16S,F16G,F16A TestModelNo.: F16S BrandName: ITIAN SoftwareVersion: F16-1024N-V1 HardwareVersion: F16-1024-5004-V12 EUTPowerSupply: DC5V=2A,9V=2A 3.3ProductSpecificationsubjectivetothisstandard EquipmentCategory:Non-ISMfrequency OperationFrequencyrange:110kHz~205kHz ModulationType:ASK AntennaType:Inductioncoil AntennaGain:0dBi Power:Output:28W(Max) Note: 1.Insection15.31(m),regardstotheoperatingfrequencyrangeless1MHz. ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231001943E-02 Page:5of10 3.4TestEnvironment OperatingEnvironment: Temperature: 25.5  C Humidity:53%RH AtmosphericPressure:1009mbar TestMode: Modea:KeeptheEUTWirelessChargingpadforGalaxyWatchOutPut3W Modeb:KeeptheEUTWirelessChargingpadforWireless1OutPut5W Modec:Keept…

Text truncated - open the document above for the full version.

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 TestReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonly tothesample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.:CQASZ20231001943E-01 Applicant:ShenzhenItianTechnologyCo.,LTD AddressofApplicant:6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China EquipmentUnderTest(EUT): Product:3in1WirelessCharger ModelNo.:F16S,F16G,F16A TestModelNo.:F16S BrandName:ITIAN FCCID:2AUDO-F16SF16GF16A Standards:47CFRPart15,SubpartC DateofReceipt:2023-10-27 DateofTest:2023-10-27to2023-11-21 DateofIssue: 2023-11-21 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (JoeWang) ReviewedBy: (TimoLei) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231001943E-01 Page: 2 of 32 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20231001943E-01Rev.01 Initialreport 2023-11-21 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231001943E-01 Page: 3 of 32 2TestSummary TestItemTestRequirementTestmethodResult AntennaRequirement 47CFRPart15,SubpartCSection 15.203 ANSIC63.102013PASS ACPowerLine Conducted Emission 47CFRPart15,SubpartCSection 15.207 ANSIC63.102013PASS 20dBOccupied Bandwidth 47CFRPart15,SubpartCSection 15.215 ANSIC63.102013PASS RadiatedEmission, RadiatedSpurious Emissions 47CFRPart15,SubpartCSection 15.209 ANSIC63.102013PASS ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231001943E-01 Page: 4 of 32 3Contents Page 1VERSION..........................................................................................................................................................................2 2TESTSUMMARY............................................................................................................................................................3 3CONTENTS......................................................................................................................................................................4 4GENERALINFORMATION...........................................................................................................................................5 4.1CLIENTINFORMATION.................................................................................................................................................5 4.2GENERALDESCRIPTIONOFEUT.................................................................................................................................5 4.3PRODUCTSPECIFICATIONSUBJECTIVETOTHISSTANDARD........................................................................................5 4.4TESTENVIRONMENT...................................................................................................................................................6 4.5DESCRIPTIONOFSUPPORTUNITS...............................................................................................................................6 4.6STATEMENTOFTHEMEASUREMENTUNCERTAINTY....................................................................................................7 4.7TESTLOCATION..........................................................................................................................................................7 4.8TESTFACILITY............................................................................................................................................................7 4.9DEVIATIONFROMSTANDARDS....................................................................................................................................7 4.10OTHERINFORMATIONREQUESTEDBYTHECUSTOMER............................................................................................7 4.11EQUIPMENTLIST.......................................................................................................................................................8 5TESTRESULTSANDMEASUREMENTDATA.......................................................................................................9 5.1ANTENNAREQUIREMENT............................................................................................................................................9 5.2CONDUCTEDEMISSIONS............................................................................................................................................10 5.320DBOCCUPYBANDWIDTH......................................................................................................................................15 5.4RADIATEDSPURIOUSEMISSION&RESTRICTEDBANDS...........................................................................................17 5.4.1SpuriousEmissions......................................................................................................................................17 6PHOTOGRAPHS-EUTTESTSETUP.....................................................................................................................24 6.1RADIATEDEMISSION.................................................................................................................................................24 6.2CONDUCTEDEMISSION..............................................................................................................................................25 7PHOTOGRAPHS-EUTCONSTRUCTIONALDETAILS......................................................................................26 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231001943E-01 Page: 5 of 32 4GeneralInformation 4.1ClientInformation Applicant: ShenzhenItianTechnologyCo.,LTD AddressofApplicant: 6F,BuildingD,Phase2nd,AnfengInd…

Text truncated - open the document above for the full version.

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231001943E-01 Page: 28 of 32 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231001943E-01 Page: 29 of 32 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231001943E-01 Page: 30 of 32 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231001943E-01 Page: 31 of 32 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231001943E-01 Page: 32 of 32 ***ENDOFREROPT***

Setupphotos 1Photographs-EUTTestSetup 1.1RadiatedEmission 9kHz~30MHz: 30MHz~1GHz: 1.2 ConductedEmission