2AUHG-15FLPRLED Panel

LED DOWNLIGHT INSTALLATION INSTRUCTIONS Read the instruction sheet and all product labels before installing fixture. This product must be installed in full accordance with applicable electrical and building codes by a person familiar with the construction and operation of this fixture and all involved hazards. Installation should be performed by a qualified electrician in accordance with the National Electrical Code and relevant local codes. TO PREVENT ELECTRICAL SHOCK, POWER SHOULD BE TURNED OFF AT THE FUSE BOX BEFORE INSTALLATION. SAFETY WARNINGS: Read all product labels and directions. ·WARNING – Risk of fire or electric shock. LED Retrofit Kit installationrequires knowledge of luminaires electrical systems. If not qualified, do not attempt installation.Contact a qualified electrician. ·WARNING – Risk of fire or electric shock. Install this kit only in the luminaires that have the construction features and dimensions shown in the photographs and/or drawings. · Installation should be performed only by a qualified electrician in accordance with the National Electrical Code and relevant local codes. ·Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation. ·WARNING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects. ·Lamp replacement instructions shall indicate the manufacturer's custom lamp part number, and a method to order replacement lamps by phone, website and/or mail. ·The recessed luminaire is intended for mounting only in a covered ceiling (where only the led side of the luminaire will be exposed to damp or dry locations). · INSTALLATION SHOULD ONLY BE PERFORMED AFTER POWER TO THE FIXTURE HAS BEEN DISCONNECTED. ·These instructions shall be included on an information sheet packaged with each unit. FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the device and receiver Connect the device into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/television technician for help . The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INSTALLATION INSTRUCTIONS: 1.Attach mounting bracket to the J-Box using the 2 provided screws. 2.Attach mounting bracket to the board using the expansion bolts and Cross Nibbed Screw. 3.Attach the hook to one of the holes in the mounting bracket. 4.The hook is then inserted into the J-box 5.Insert existing wire ends from the J-Box to the LED adapter.Black wire（L）、White wire （N）and Ground wire (G). Connect the end of the LED adapter corning out of the J-Box to the fixture and wire the grounds together using the provided wire nut. 6.Then plug all wiring harnesses and fixtures into the J-Box 7.Align the wide notch.Push fixture up into the mounting bracket until it clicks into place Make sure all wires are carefully tucked inside the J-Box and fixture is flush with the ceiling. 8.Tighten the clamp by rotating clockwise.Installation complete,restore power. 1 2 4 3 5 6 7 8 6

ARTIKA FOR LIVING INC 1756, 50th Avenue Montreal (Lachine), Quebec Canada H8T 2V5 053019 – 12 Authority to Act as Agent Date: February 1, 2021 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: _______Audix Technology (Shanghai) Co., Ltd. ____ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _____2022.01.29_____ By: _____________ Mathieu Seguin (Signature 1 ) (Print name) Title: ___Engineering & QC Director ____ On behalf of: ___ARTIKA FOR LIVING INC ___ (Company Name) Telephone: __514-883-8699__ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

ARTIKA FOR LIVING INC 1756, 50th Avenue Montreal (Lachine), Quebec Canada H8T 2V5 053019 – 12 Request for Confidentiality Date: February 1, 2021 Subject: Confidentiality Request for: ____2AUHG-15FLPR____ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☐ Short Term External Photos ☐ Short Term ☐ Permanent * 2 Internal Photos ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☐ Permanent Parts List & Placement/BOM ☐ Short Term ☐ Permanent Tune-Up Procedure ☐ Short Term ☒ Permanent Schematics ☐ Short Term Test Setup Photos ☐ Short Term ☐ Permanent * 3 User’s Manual ___ARTIKA FOR LIVING INC __ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 3 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: _________ _/Engineering & QC Director __ ___Mathieu Seguin ____ (Signature/Title 4 ) (Print name) 2 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 3 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 4 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

ARTIKA FOR LIVING INC 1756, 50th Avenue Montreal (Lachine), Quebec Canada H8T 2V5 Date: 2021.03.04 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Attn: Office of Engineering and Technology Ref: 2AUHG-15FLPR To whom it may concern: Please be notified that we, the undersigned, ARTIKA FOR LIVING INC declare that the differences among the models are as following: The model number is 15FLPR-SP3-XXX#YY, "XXX" in the model name is 3 letters (from A-Z) to represent the customer, “#” is a number (from 0-9) to represent the destination country, “YY” are letters (from A-Z) to represent the product color. Sincerely, Name / Title: Mathieu Seguin/ Engineering & QC Director Company: ARTIKA FOR LIVING INC Tel: 514-883-8699 Email: [email protected]

Audix Technology (Shanghai) Co., Ltd. Report No.ACI-F21032 FIGURE 1 LED PANEL (M/N: 15FLPR-SP3-WH) G ENERAL APPEARANCE (FRONT VIEW) FIGURE 2 LED PANEL (M/N: 15FLPR-SP3-WH) GENERAL APPEARANCE (BACK VIEW)

FIGURE 1 LED PANEL (M/N: 15FLPR-SP3-WH) COVER REMOVED FIGURE 2 LED PANEL (M/N: 15FLPR-SP3-WH) MAINBOARD FRONT VIEW FIGURE 3 LED PANEL (M/N: 15FLPR-SP3-WH) MAINBOARD BACK VIEW FIGURE 4 LED PANEL (M/N: 15FLPR-SP3-WH) LED FIGURE 5 LED PANEL (M/N: 15FLPR-SP3-WH) LED FRONT VIEW FIGURE 6 LED PANEL (M/N: 15FLPR-SP3-WH) LED BACK VIEW

Artika for Living Inc. FCC ID: 2AUHG-15FLPR Page 1 of 13 Audix Technology (Shanghai) Co., Ltd. Report No.ACI-F21032 Prepared For : Artika for Living Inc. 1756, 50th Avenue Montreal (Lachine), Quebec Canada H8T 2V5 Prepared By : Audix Technology (Shanghai) Co., Ltd. 3F and 4F, 34Bldg 680 Guiping Rd, Caohejing Hi-Tech Park, Shanghai, China 200233 Tel: +86-21-64955500 File No. : C1D2101032 Report No. : ACI-F21032 Date of Test : 2021.01.28 Date of Report : 2021.02.02 TEST REPORT On behalf of Artika for Living Inc. LED Panel Model No.: 15FLPR-SP3-XXX#YY FCC ID : 2AUHG-15FLPR TESTING NVLAP LAB CODE 200371-0 The statement is based on a single evaluation of samples of the above-mentioned products. It does not imply an assessment of the whole production and does not permit the use of the test lab logo. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, o r any agency of the Federal Government. Artika for Living Inc. FCC ID: 2AUHG-15FLPR Page 2 of 13 Audix Technology (Shanghai) Co., Ltd. Report No.ACI-F21032 TABLE OF CONTENTS Description Page Test Report ............................................................................................................................................ 3 1 SUMMARY OF STANDARDS AND RESULTS .......................................................................... 4 1.1 Description of Standards and Results ......................................................................................... 4 2 GENERAL INFORMATION .......................................................................................................... 5 2.1 Description of Device (EUT) ..................................................................................................... 5 2.2 Description of Test Facility ........................................................................................................ 5 3 CONDUCTED EMISSION TEST .................................................................................................. 6 3.1 Test Equipment ........................................................................................................................... 6 3.2 Block Diagram of Test Setup ..................................................................................................... 6 3.3 Conducted Emission Limits [FCC Part 15 Subpart B 15.107(a)] .............................................. 6 3.4 Test Configuration ...................................................................................................................... 6 3.5 Operating Condition of EUT ...................................................................................................... 7 3.6 Test Procedures .......................................................................................................................... 7 3.7 Test Results ................................................................................................................................ 7 4 RADIATED EMISSION TEST ....................................................................................................... 9 4.1 Test Equipment ........................................................................................................................... 9 4.2 Block Diagram of Test Setup ..................................................................................................... 9 4.3 Radiated Emission Limit [FCC Part 15 Subpart B 15.109(a)] ..... ............................................ 10 4.4 Test Configuration .................................................................................................................... 10 4.5 Operating Condition of EUT .................................................................................................... 10 4.6 Test Procedures ........................................................................................................................ 10 4.7 Test Results .............................................................................................................................. 11 5 MEASUREMENT UNCERTAINTY LIST ................................................................................. 13 6 PHOTOGRAPHS ............................................................................................................................. 1 6.1 Conducted Emission Test ........................................................................................................... 1 6.2 Radiated Emission Test .............................................................................................................. 2 APPENDIX (Photos of EUT) Artika for Living Inc. FCC ID: 2AUHG-15FLPR Page 3 of 13 Audix Technology (Shanghai) Co., Ltd. Report No.ACI-F21032 TEST REPORT Applicant : Artika for Living Inc. Manufacturer : Hengdian Group Tospo Lighting Co., Ltd. EUT Description : LED Panel (A) Model No. : 15FLPR-SP3-XXX#YY (B) Power Supply : AC 120V/60Hz Test Procedure Used: FCC RULES AND REGULATIONS PART 15 SUBPART B CLASS B AND ANSI C63.4-2014 The device described above is tested by Audix Technology (Shanghai) Co., Ltd. to determine the maximum emission levels emanating from the device. The maximum emission levels are compared to the FCC Part 15 Subpart B (Class B) limits both radiated and conducted emissions. The test results are contained in this test report and Audix Technology (Shanghai) Co., Ltd. is assumed full responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT, which was tested in 3m anechoic chamber is in technically compliance with the FCC official limits. This report applies to above tested sample only. This report shall not be reproduced in part without written approval of Audix Technology (Shanghai) Co., Ltd. Date of Test : 2021.01.28 Date of Report : 2021.02.02 Producer : Review : Signatory : Name of the Responsible Party : Signature : WENCY YANG / Deputy Manager BYRON KWO/Assist…

Text truncated - open the document above for the full version.

Audix Technology (Shanghai) Co., Ltd. Report No.ACI-F21032 6 PHOTOGRAPHS 6.1 Conducted Emission Test Audix Technology (Shanghai) Co., Ltd. Report No.ACI-F21032 6.2 Radiated Emission Test F RONT VIEW OF RADIATED EMISSION B ACK VIEW OF RADIATED EMISSION