2AUHG-CL-COCloset light

Made in China Fabriqué en Chine Hecho en China Residential use only Usage résidentiel seulement Uso residencial solamente Indoor use only Usage intérieur seulement Uso interiores solamente Led ceiling lights kit - Closet Light TM INSTRUCTION MANUAL IMPORTANT: READ CAREFULLY AND KEEP. Ensemble de plafonniers à DEL - Closet Light MC MANUEL D’INSTRUCTIONS IMPORTANT : À LIRE ATTENTIVEMENT ET À CONSERVER. Juego de luminarias LED de techo - Closet Light MR MANUAL DE INSTRUCCIONES IMPORTANTE: LEER DETENIDAMENTE Y CONSERVAR. Model / Modèle / Modelo: CL-CO,CL-CO8-C Rev. 21-07-2020 2 ITEM PIÈCE PIEZA DESCRIPTION DESCRIPTION DESCRIPCIÓN QUANTITY QUANTITÉ CANTIDAD A Junction box screw Vis de boitier de raccordement Tornillo de caja de conexiones × 2 B Wire connector Capuchon de connexion Conector de cable × 2 C Mounting bracket Support de montage Soporte de montaje × 1 D LED ceiling light Plafonnier à DEL Luminaria LED de techo × 2 INCLUDED HARDWARE MATÉRIEL INCLUS HERRAMIENTAS INCLUIDO 3 STEP-BY-STEP INSTALLATION INSTALLATION DÉTAILLÉE INSTALACIÓN ETAPA POR ETAPA 1 A B C D 4 WARNING: Risk of electrical shock. Turn off breaker at the panel. Switch off the main electrical supply from the fuse box/ circuit breaker before installing the unit or doing any maintenance. Do not use outdoor. AVERTISSEMENT: Risque de décharge électrique. Éteindre le disjoncteur sur le panneau électrique. Il est important de couper l’alimentation électrique du disjoncteur avant de procéder à l’installation ou à l’entretien. Ne pas utiliser à l’extérieur. ADVERTENCIA: Riesgo de descarga eléctrica. Desconectar la corriente eléctrica del panel (disyuntor). Desconecte la instalación eléctrica en la caja de circuitos/ disyuntor antes de instalar esta unidad o realizar tareas de mantenimiento en ella. No usar en exteriores. CAUTION If using a dimmer, it must be LED compatible. IMPORTANT The installer and/or user must read, understand and follow these instructions before installing the product. This product must be properly installed before it is used. If instructions are not followed, the manufacturer will not be held responsible for any problems or product malfunction. Failure to follow installation and/or operating instructions voids the warranty. We recommend that this product be installed by a certified electrician. In some states or provinces, it is a legal requirement for this type of product to be installed by a certified electrician, according to the electrical and building codes effective in the region where the unit is used. ATTENTION Si un gradateur est utilisé, celui-ci doit être compatible avec les lumières à DEL. IMPORTANT Avant l’installation de ce produit, l’utilisateur et/ou l’installateur doit avoir lu et compris ces instructions. Cet appareil doit être installé convenablement avant usage. Si ces instructions ne sont pas respectées, le fabricant ne pourra être tenu responsable d’aucun problème ou de dysfonctionnement du produit. Le non-respect des instructions d’installation et/ou d’utilisation annulera la garantie en vigueur. Nous recommandons que ce produit soit installé par un électricien certifié. Dans certains États ou provinces, il est légalement requis que ce type de produit soit installé par un électricien certifié conformément aux codes de l’électricité et du bâtiment en vigueur. ATENCIÓN Si utiliza un regulador, debe asegurarse de que es compatible con las luces LED. IMPORTANTE El instalador o usuario debe leer detenidamente las instrucciones antes de instalar el producto y seguirlas fielmente. El producto debe estar correctamente instalado antes de su utilización. Si no siguen las instrucciones, el fabricante no se hará responsable de problemas o de un funcionamiento incorrecto del producto. Si no sigue las instrucciones de instalación o de uso, se anulará la garantía. Le recomendamos que el producto sea instalado por un electricista certificado. En algunos estados o provincias, se requiere por ley que este tipo de producto sea conectado por un electricista certificado siguiendo los códigos eléctricos y arquitectónicos de la región. CAUTION ATTENTION ATENCIÓN 5 MOUNTING BRACKET INSTALLATION INSTALLATION DU SUPPORT DE MONTAGE INSTALACIÓN DEL SOPORTE DE MONTAJE 1 A C 6 CONNECTING THE WIRES CONNEXION DES FILS CONECTANDO LOS CABLES 2 Black (L) Noir (L) Negro (L) White (N) Blanc (N) Blanco (N) Ground wire (G) Fil de mise à la terre (G) Cable de tierra (G) B D C 7 LUMINAIRE INSTALLATION INSTALLATION DU LUMINAIRE INSTALACIÓN DE LUMINARIAS 3 D C 8 LUMINAIRE INSTALLATION INSTALLATION DU LUMINAIRE INSTALACIÓN DE LUMINARIAS 4 D 9 CHARACTERISTICS CARACTÉRISTIQUES CARACTERISTICAS 5 D ! ! ! Range Rendement Rango 360 ̊ Sensor diameter Diamètre du capteur Diámetro del sensor 3 - 5 ft/pi Install height Hauteur d'installation Instalar altura 7 - 10 ft/pi 10 DAY / NIGHT MODE MODE JOUR / NUIT MODO DÍA / NOCHE 6 Light up during day and night S'allume de jour comme de nuit Ilumina durante el día y la noche Light up only during night Ne s'allume que la nuit Ilumina solo durante la noche D 12 Operation is subject to the following two conditions: 1. this device may not cause interference, and 2. this device must accept any inteference, including inteference that may cause undesired operation of the device. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage; et 2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. La operación está sujeta a las dos condiciones siguientes: 1. este dispositivo no puede causar interferencias perjudiciales, y 2. este dispositivo debe aceptar cualquier interferencia recibida, incluídas las interferencias que puedan provocar un funcionamiento no deseado. CANADA (IC) 13 WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This device complies with…

Text truncated - open the document above for the full version.

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: March 20, 2023 Signed by (Printed Name/Title): Nathan Grinager / Co-President *This letter must be dated within 1-year of the date the application is submitted to the TCB for device certification The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Artika For Living Inc. Grantee Code: 2AUHG Contact Name: Mathieu Seguin Street Address: 1756 50 th avenue, City/Province/Zip: Montreal (Lachine)/ Quebec/ Canada/ H8T 2V5 Telephone No: 1-514-883-8699 Email: [email protected] Applicant Signature: Date: 2023-03-20 Signed by (Printed Name/Title): Mathieu Seguin/ Engineering and Quality Control Director

ARTIKAFORLIVINGINC 2023-07-06 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor(FCCID:2AUHG-CL-CO) [ARTIKAFORLIVINGINC](“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Sincerely, MathieuSeguin Engineering&QCDirector ARTIKAFORLIVINGINC 175650thavenue.LachineQuebec.H8T2V5Canada ARTIKAFORLIVINGINC 2023-07-06 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor(FCCID:2AUHG-CL-CO) [ARTIKAFORLIVINGINC](“theapplicant”)certifiesthat,asofthedateofthefilingof theapplication,theapplicantisnotidentifiedontheCoveredListasanentityproducing “covered”equipment. Sincerely, MathieuSeguin Engineering&QCDirector ARTIKAFORLIVINGINC 175650thavenue.LachineQuebec.H8T2V5Canada

ARTIKAFORLIVINGINC Declarationonmodeldifference Wetheundersignedherebyconfirmthatthesemodelsareidentical,andallmodelshavethe sameRFmoduleandantenna,PCBlayout,schematicsandcomponent.Onlythemodelsnameare different. ProductionnameTrademark FCCID Modelno. Closetlight 2AUHG-CL-CO MK-SPL-SN，MK-SPL-WH，CL- CO-XXXXXX,10FM-CMP-XXXXXX Sincerely, MathieuSeguin Engineering&QCDirector ARTIKAFORLIVINGINC 175650thavenue.LachineQuebec.H8T2V5Canada

ARTIKAFORLIVINGINC 2023-07-06 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeDongGuanAnciElectronicTechnologyCo.,Ltd.toact onourbehalfinallmattersrelatingtoapplicationforequipmentauthorization,includingthe signingofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseAct of1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, MathieuSeguin Engineering&QCDirector ARTIKAFORLIVINGINC 175650thavenue.LachineQuebec.H8T2V5Canada

ARTIKAFORLIVINGINC 2023-07-06 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:CONFIDENTIALITYREQUESTFOR(EUTName:Closetlight/Model:MK-SPL- SN，MK-SPL-WH，CL-CO-XXXXXX,10FM-CMP-XXXXXX/FCCID:2AUHG- CL-CO) ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459 ofCFR47.Wehaverequestedthatthe(BlockDiagram,OperationalDescription,Schematics ， F) requiredtobesubmittedwiththisapplicationbepermanentlywithheldfrompublic review. Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedtothepublic.The publicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovideunjustifiedbenefitstoitscompetitors. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, MathieuSeguin Engineering&QCDirector ARTIKAFORLIVINGINC 175650thavenue.LachineQuebec.H8T2V5Canada

FCC ID：2AUHG-CL-CO Manufacturer：ARTIKA FOR LIVING Input：AC 120V 60Hz 16 Product name：Closet light Model Numbe W INC

Web: www.gtggroup.com E-mail: [email protected].: 86-400 755 8988 47 C F Report Reference No. .......................: TEST REPORT FR FCC Part15, Subpart B CC ID: 2AUHG-CL-CO E01A22120211F00201 Prepared by (name + signature) .......: Luke Li Reviewed by (name + signature) ......: Duke Liu Approved by (name + signature) ......: Tiger Xu Date of Receipt of EUT .....................: Date of Test.......................................: Date of issue .....................................: Testing Laboratory ............................: Address .............................................: Laboratory location ...........................: Applicant‟s name ..............................: Address .............................................: Manufacturer‟s name ........................: Address .............................................: Factory‟s name ...........................: Address.....................................: December 08, 2022 December 08, 2022 to December 10, 2022 June 21, 2023 Dong Guan Anci Electronic Technology Co., Ltd 1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan Lake Hi-tech Industrial Development Zone, Dongguan City, Guangdong Pr., China. EMC Laboratory ARTIKA FOR LIVING INC 1756 50th a venue, Lachine Quebec, H8T 2V5 Canada Meko Lighting Company Limited NO.2 Songlin East Road, ZengTian Village, Xin An District, Chang An Town, Dongguan City, China Meko Lighting Company Limited NO.2 Songlin East Road, ZengTian Village, Xin An District, Chang An Town, Dongguan City, China TRF No.: 01-E001-5A TRF Originator: GTG TRF Date: 2022-07-01 Page 2 of 29 Report No.: E01A22120211F00201 TRF No.: 01-E001-5A Global Testing , Great Quality. Test specification: Product..............................................: Closet light Trade Mark........................................: Description ........................................: Models ..............................................: Test Sample ......................................: Ratings ..............................................: Standards ........................................: The device described above was te determine the maximum emission lev endure and its performance criterion. Guan Anci Electronic Technology Co. of these measurements. This report standards. This report applies to the above sam approval of Dong Guan Anci Electron The products covered by this report are surface ceiling-mounted luminaires which is suitable for dry locations use. They are provided with lead conductor for field wiring connection. MK-SPL-SN, MK-SPL-WH, CL-CO-, 10FM-CMP-, followed by six characters They are similar in mechanical and electrical construction, differences among them are outlook, size and wattage. Model nomenclature: CL-CO-XXXXXX,10FM-CMP-XXXXXX Suffix "X" can be A to Z, 1 to 9 or blank, used for a commercial code. MK-SPL-SN Input: AC 120V,60Hz, 16W 47 CFR FCC Part 15, Subpart B ANSI C63.4: 2014 sted by Dong Guan Anci Electronic Technology Co., Ltd. to els emanated from the device and severity levels of the device The measurement results are contained in this test report and Dong , Ltd. assumes full responsibility for the accuracy and completeness shows the EUT is technically compliance with the above official ple only and shall not be reproduced in part without written ic Technology Co., Ltd. Page 3 of 29 Report No.: E01A22120211F00201 TRF No.: 01-E001-5A Global Testing , Great Quality. Table of Contents Page 1.GENERAL INFORMATION4 1.1 GENERAL PRODUCT INFORMATION 4 1.2 Modified Information 5 1.3 FACILITIES AND ACCREDITATION 6 1.4 NORMATIVE REFERENCES 6 2.SUMMARY OF TEST RESULTS7 2.1 MEASUREMENT UNCERTAINTY 7 2.2 DESCRIPTION OF TEST MODES 8 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 9 3.CONDUCTED EMISSION TEST10 3.1 CONDUCTED EMISSION MEASUREMENT 10 3.1.1 LIMITS OF CONDUCTED EMISSION (MAINS PORT) 10 3.1.2 MEASUREMENT INSTRUMENTS LIST 11 3.1.3 TEST PROCEDURE 11 3.1.4 DEVIATION FROM TEST STANDARD 11 3.1.5 TEST SETUP 12 3.1.6 EUT OPERATING CONDITIONS 12 3.1.7 TEST RESULTS 12 3.2 RADIATED EMISSION MEASUREMENT 15 3.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT 15 3.2.2 MEASUREMENT INSTRUMENTS LIST 16 3.2.3 TEST PROCEDURE 17 3.2.4 DEVIATION FROM TEST STANDARD 17 3.2.5 TEST SETUP 18 3.2.6 EUT OPERATING CONDITIONS 19 3.2.7 TEST RESULTS 19 4.ATTACHMENT22 4.1 EUT TEST PHOTO22 4.2 EUT PRODUCT PHOTO23 Page 4 of 29 Report No.: E01A22120211F00201 TRF No.: 01-E001-5A Global Testing , Great Quality. 1.GENERAL INFORMATION 1.1 GENERAL PRODUCT INFORMATION Cl oset light, direct plug-in type, which designed to supply power for audio, video, information and communication technology, business and office machines, for indoor use only. The models MK-SPL-SN was tested in this report. The EUT passed the test. Page 5 of 29 Report No.: E01A22120211F00201 TRF No.: 01-E001-5A Global Testing , Great Quality. 1.2 Modified Information Version Revision Date Report No. Ver.1.0 Original Report / E01A22120211F00201 Page 6 of 29 Report No.: E01A22120211F00201 TRF No.: 01-E001-5A Global Testing , Great Quality. 1.3 FACILITIES AND ACCREDITATION Test Location Dong Guan Anci Electronic Technology Co., Ltd Address 1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan Lake Hi-tech Industrial Development Zone, Dongguan City, Guangdong Pr., China. Accreditation Laboratory The Laboratory has been assessed and proved to be in compliance with FCC, The Registration Number is 991798. Description All tests measurement facilities use to collect the measurement data are located at 1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan Lake Hi-tech Industrial Development Zone, Dongguan City, Guangdong Pr., China. 1.4 NORMATIVE REFERENCES [1]ANSI C63.4:2014 American National Standard for Methods of Measuring of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. [2]47 CFR FCC Part 2 General Rules and Regulations [3]47 CFR FCC Part 15 Radio Frequency Devices (Subpart B) Page 7 of 29 …

Text truncated - open the document above for the full version.