2AUHG-FLP14TLED Panel

ZHEJIANG SHUANGYU ELECTRONIC TECHNOLOGY CO.,LTD LED panel Manual instruction (Please read the manual carefully before using the product) Basic Features: Product name：LED Panel Rated input：120V～60Hz Rated Power：46W Powe r Factor： >0.9 Colo r temperature range：4000K Workin g Temperature：-10-+40°C Workin g Humidity：0%-85% Lifetime：5000 0 Hours Contro l mode：tria c dimmer Product instruction（overview） Parts Description Quantity Junction box screw 2 Wire connector 3 Retaining screw 4 Wall anchor 4 Mounting plate 1 panel light X1 Assembly instruction: 1、 Install the mounting plat on the junction box; 2、 Use a crayon to mark the location of the screw hole; Mounting plate Junction box screw Crayon Mounting plate Support screw hole Junction box 3、 Remove the mounting plate, drill holes in the marked position with electric drill, and install the wall anchor into the hole; 4、As shown below, install the mounting plate； Mounting plate Retaining screw Junction box screw 5、As shown in the figure, hang the hook on the mounting plate and connect the wires as required; Wired hook Encoche LED panel White(N) Black(L) Wire connector Ground wire(G) Mounting plate LED panel slot Meta anchor LED panel 6、Assemble the panel light onto the mounting plate as shown； LED panel Metal anchor LED panel slot Mounting plate LED panel Attention: 1. Before using, please check the line voltage is to meet product voltage, avoiding any wrong voltage to damage product or other risk; 2. The product is irreplaceable, assembly must be electrical technician, when lifetime is ending, please replace the product; 3. Ceiling product yields heat energy, please keep the circumstance around the product in the air flow to help heat consumption. Non-warranty items: 1. Repair without being allowed, misuse; collision; abuse; liquid entering; accident; change; damaging and painting the label or false mark; 2.Over warranty period； 3.Damage by Natural power with irresistible condition； 4.Doesn’t fulfill the list on the《product failure condition》； 5.Deliberately being wrong to operate the product which including accessory on the 《product failure condition》, such as working voltage, the phase cutting, or unmatched adapter ETC which apples in the condition non-defined by manufacturer ; Manufacturer： ZHEJIANG SHUANGYU ELECTRONIC TECHNOLOGY CO.,LTD Address：Tashan Industry Zone,Meilin Street,Ninghai County,Ningbo City, 315609,Zhejiang,P.R.China Instruction：product instruction(manual), refer to《design standard on Product package material standard》 FCC Statement： Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

'(&/$5$7,21 'DWH2020-09-08 )('(5$/&20081,&$7,216&200,66,21 $XWKRUL]DWLRQDQG(YDOXDWLRQ'LYLVLRQ  2DNODQG0LOOV5RDG &ROXPELD0' 'HDU6LURU0DGDP :H ARTIKA FOR LIVING INCKHUHE\GHFODUHWKDWSURGXFWQDPH LED Panel PRGHOQDPHFLP14T-C01, FLP14T-XXXXXXX (XXXXXXX can be A to Z and/or a to z and/or 0 to 9 and/or Blank (commercial code). FCC ID: 2AUHG-FLP14T). These models are identical with the PCB design, components and electromagnetics co mpatibility characteristics. FLP14T-C01 has been tested by BACL. 7KHGLIIHUHQFHVRIWKHPDUHDVIROORZV 0RGHOQDPH 3OHDVHFRQWDFWPHLIWKHUHLVQHHGIRUDQ\DGGLWLRQDOFODULILFDWLRQRULQIRUPDWLRQ %HVW5HJDUGV Company: ARTIKA FOR LIVING INC Add: 1756 50th avenue, Lachine, Quebec, Canada, H8T 2V5 Tel: 514-883-8699 Fax: 514-636-7666 E-mail: [email protected] Signature: Typed o r Printed Name: Mathieu Seguin Title: Engineering & QC Director

Company: ARTIKA FOR LIVING INC Add: 1756 50th avenue, Lachine, Quebec, Canada, H8T 2V5 Tel: 514-883-8699 Fax: 514-636-7666 E-mail: [email protected] FCC Confidential Authorization Date: 2020-09-08 FEDERAL COMMUNICATIONS COMMISSIONS Autho rization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AUHG-FLP14 T To: whom it may concern, In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, ARTIKA FOR LIVING INC hereby requests long-term confidential treatment o f information accompanying this application as outlined below: Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Sig nature: Typed or Printed Name: Mathieu Seguin Title: Engineering & QC Director

EXHIBIT A - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT B - EUT INTERNAL PHOTOGRAPHS

FCC PART 15B TEST REPORT For ARTIKA FOR LIVING INC 1756 50th avenue, Lachine, Quebec, Canada, H8T 2V5 Report Type: Original Report Product Ty p e: LED Panel Test Engineer: Cary Han Report Number: RSHB200908001-00A Report Date: 2021-01-20 Reviewed By: Oscar Ye EMC Manager Prepared By: Bay Area Compliance Laboratories Corp. (Kunshan) No.248 Chenghu Road, Kunshan,Jiangsu province, China Tel: +86-0512-86175000 Fax: +86-0512-88934268 www.baclcorp.com.cn FCC ID: 2AUHG-FLP14T Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RSHB200908001-00A FCC Part 15B Page 2 of 14 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 3 TEST METHODOLOGY .................................................................................................................................................. 3 TEST FACILITY ............................................................................................................................................................. 3 SYSTEM TEST CONFIGURATION .......................................................................................................................... 4 JUSTIFICATION ............................................................................................................................................................. 4 EUT EXERCISE SOFTWARE .......................................................................................................................................... 4 SPECIAL ACCESSORIES ................................................................................................................................................. 4 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 4 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 4 EXTERNAL I/O CABLE .................................................................................................................................................. 4 BLOCK DIAGRAM OF RADIATED TEST SETUP ............................................................................................................... 5 SUMMARY OF TEST RESULTS ............................................................................................................................... 6 FCC §15.107 –CONDUCTED EMISSIONS ............................................................................................................... 7 APPLICABLE STANDARD .............................................................................................................................................. 7 MEASUREMENT UNCERTAINTY .................................................................................................................................... 7 EUT SETUP .................................................................................................................................................................. 7 EMI TEST RECEIVER SETUP ......................................................................................................................................... 8 TEST PROCEDURE ........................................................................................................................................................ 8 TEST EQUIPMENT LIST AND DETAILS ........................................................................................................................... 8 TEST DATA .................................................................................................................................................................. 9 FCC §15.109 - RADIATED EMISSIONS ................................................................................................................. 11 APPLICABLE STANDARD ............................................................................................................................................ 11 MEASUREMENT UNCERTAINTY .................................................................................................................................. 11 EUT SETUP ................................................................................................................................................................ 11 EMI TEST RECEIVER SETUP ....................................................................................................................................... 12 TEST PROCEDURE ...................................................................................................................................................... 12 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 12 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 12 TEST DATA ................................................................................................................................................................ 13 Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RSHB200908001-00A FCC Part 15B Page 3 of 14 GENERAL INFORMATION Product Description for Equipment under Test (EUT) Applicant ARTIKA FOR LIVING INC Manufacturer ZH…

Text truncated - open the document above for the full version.

EXHIBIT C - TEST SETUP PHOTOGRAPHS Conducted Emissions - Front Side Conducted Emissions - Left Side Radiated Emissions Front Side (Below 1 GHz) Radiated Emissions Rear Side (Below 1 GHz)