2AUHG-FLR-CLClayton Floor lamp

Floor lamp - Clayton TM INSTRUCTION MANUAL IMPORTANT: READ CAREFULLY AND KEEP. Lampadaire - Clayton MC MANUEL D’INSTRUCTIONS IMPORTANT : À LIRE ATTENTIVEMENT ET À CONSERVER. Lampara de piso - Clayton MC MANUAL DE INSTRUCCIONES IMPORTANTE: LEER DETENIDAMENTE Y CONSERVAR. Made in China Fabriqué en Chine Hecho en China Residential use only Usage résidentiel seulement Uso residencial solamente Indoor use only Usage intérieur seulement Uso interiores solamente Model / Modèle / Modelo: FLR-CL-BL Rev. 28-12-2023 ITEM PIÈCE PIEZA DESCRIPTION DESCRIPTION DESCRIPCIÓN QUANTITY QUANTITÉ CANTIDAD A Floor Lamp Lampadaire Lámpara de pie × 1 B Diffuser Diffuseur Difusor × 1 C Wall plug Prise murale Enchufe de pared x 1 D Wrench Clé Llave inglesa x 1 2 INCLUDED HARDWARE MATÉRIEL INCLUS HERRAMIENTAS INCLUIDAS B C D A 3 DETAILED VIEW VUE DETALLÉE VISTA DETALLADA 1 CAUTION ATTENTION ATENCIÓN IMPORTANT The installer and/or user must read, understand and follow these instructions before installing the product. This product must be properly installed before it is used. If instructions are not followed, the manufacturer will not be held responsible for any problems or product malfunction. Failure to follow installation and/or operating instructions voids the warranty. The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed. IMPORTANT Avant l’installation de ce produit, l’utilisateur et/ou l’installateur doit avoir lu et compris ces instructions. Cet appareil doit être installé convenablement avant usage. Si ces instructions ne sont pas respectées, le fabricant ne pourra être tenu responsable d’aucun problème ou de dysfonctionnement du produit. Le non-respect des instructions d’installation et/ou d’utilisation annulera la garantie en vigueur. Le câble ou le cordon extérieur souple de ce luminaire ne peut pas être remplacé; si le câble est endommagé, le luminaire doit être détruit. IMPORTANTE El instalador o usuario debe leer detenidamente las instrucciones antes de instalar el producto y seguirlas fielmente. El producto debe estar correctamente instalado antes de su utilización. Si no se siguen las instrucciones, el fabricante no se hará responsable de problemas o de un funcionamiento incorrecto del producto. Si no sigue las instrucciones de instalación o de uso, se anulará la garantía. El cable o cordón flexible externo de esta luminaria no puede ser reemplazado; si el cable está dañado, la luminaria debe ser destruida. WARNING: Risk of electrical shock. Turn off breaker at the panel. AVERTISSEMENT: Risque de décharge électrique. Éteindre le disjoncteur sur le panneau électrique. ADVERTENCIA: Riesgo de descarga eléctrica. Desconectar la corriente eléctrica del panel (disyuntor). 4 FLOOR LAMP ASSEMBLY ASSEMBLAGE DU LAMPADAIRE MONTAJE DE LÁMPARA DE PIE 2 D A 5 FLOOR LAMP ASSEMBLY ASSEMBLAGE DU LAMPADAIRE MONTAJE DE LÁMPARA DE PIE 3 A 6 DIFFUSER INSTALL ASSEMBLAGE DU LAMPADAIRE INSTALACIÓN DEL DIFUSOR 4 A B 7 POWER PLUG CONNECTION CONNEXION DE LA PRISE D'ALIMENTATION CONEXIÓN DEL ENCHUFE DE ALIMENTACIÓN 5 A B C 8 CONNECTION BRANCHEMENT CONEXIÓN 6 Have a power outlet nearby Disposer d’une prise d’alimentation à proximité Tener una toma de corriente cerca ! C 9 TURN ON/OFF ALLUMER/ÉTEINDRE ENCENDER/APAGAR 7 A B Foot switch: 1) Press and release: ON / OFF 2) Press and hold: Dimming from 100% to 10% Interrupteur au pied: 1) Appuyez et relâchez : Allumé / Éteint 2) Maintenez enfoncé : Gradation de 100 % à 10 % Interruptor de pie: 1) Presione y suelte: ENCENDIDO / APAGADO 2) Mantenga presionado: Atenuación del 100% al 10% ! 10 11 WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device does not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to an outlet on a circuit that the receiver is not connected to. • Consult the dealer or an experienced radio/TV technician for help. AVERTISSEMENT : Toute modification apportée, non expressément approuvée par la partie responsable de la conformité, pourrait interdire à l’utilisateur d’exploiter cet appareil. Ce dispositif est conforme à la partie 15 des règles de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : 1. ce dispositif ne peut pas causer d’interférences nuisibles; et 2. cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un fonctionnement indésirable. REMARQUE : Cet équipement a été testé et déclaré comme respectant les limites d’un dispositif numérique de classe B, conformément à la partie 15 des règles de la FCC. Ces limites sont destinées à fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère, utilise et peut émett…

Text truncated - open the document above for the full version.

Form: RFT-AMER-TCB-OP-19n Revision: 1 Page 1 of 1 Date: 1/25/2023 Attention: Application Examiner Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist and 47 CFR parts §2.903 and §2.911(d)(5)(ii) of the FCC rules Applicant: Artika For Living Inc FCC ID: 2AUHG-FLR-CL To whom it may concern, Artika For Living Inc certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to 47 CFR part §2.903 of the FCC rules and does not originate directly or indirectly from any company named on the covered list located in the link above or any subsidiary or affiliate thereof. Applicant further certifies that, as of the date of the filing of the application, the Applicant is not identified on the Covered List as an entity producing “covered” equipment and is not a subsidiary or affiliate of any such entity pursuant to 47 CFR part §1.50002 and required by 47 CFR part §2.911(d)(5)(ii) of the FCC rules. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant and agree to immediately notify Intertek if there is any change in the status identified above. ______________________________ [Signature of authorized Proprietor, Partner or Authorized Officer] [Printed Name] Mathieu Seguin [Type Title] Engineering & QC Director [Company name] Artika For Living Inc

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: January 4, 2024 Signed by (Printed Name/Title): Nathan Grinager / Co-President *This letter is valid indefinitely for all applications submitted within the period of 3/20/2023 – 3/29/2024 The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Artika For Living Inc. Grantee Code: 2AUHG Contact Name: Mathieu Seguin Street Address: 1756 50 th avenue, City/Province/Zip: Montreal (Lachine)/ Quebec/ Canada/ H8T 2V5 Telephone No: 1-514-883-8699 Email: [email protected] FRN #: 0030285126 Applicant Signature: Date: 2024-01-04 Signed by (Printed Name/Title): Mathieu Seguin/ Engineering and Quality Control Director Company name: Artika For Living inc. Adress: 1756, 50 th avenue, Montreal (Lachine), Quebec, H8T 2V5, Canada Date:2024-01-09 Subject: Declaration of Agent of Service of Process - Product "A" I, Mathieu Seguin, on behalf of Artika for living inc., hereby attest that Approve-IT, Inc. is the authorized agent for service of process for our product, " FLR-CL-BL", with the FCC-ID code "2AUHG-FLR-CL". This attestation is made in accordance with regulatory requirements and is intended to confirm that Approve-IT, Inc is duly appointed to accept service of process on behalf of Artika For Living inc. for matters related to the product. Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 Applicant Company name: Artika For Living Inc. Grantee Code: 2AUHG Contact Name: Mathieu Seguin Street Address: 1756 50 th avenue, City/Province/Zip: Montreal (Lachine)/ Quebec/ Canada/ H8T 2V5 Telephone No: 1-514-883-8699 Email: [email protected] FRN #: 0030285126 This appointment is effective as of 2024-01-09, and Approve-IT, Inc will act as the authorized representative for service of process until further notice or until such time that a new agent is appointed by Artika for Living Inc. Please note that the formal attestation of the agent for service, which serves as proof of the business relationship between our two entities, is contained in a separate document. This present document is solely intended to specify the agent responsible for the designated product. This attestation is provided in good faith and is accurate to the best of my knowledge. Sincerely, Mathieu Seguin Engineering and QC director

2023-12-19 Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement Applicant: Artika For Living Inc FCC ID: 2AUHG-FLR-CL To Whom It May Concern: We, Artika For Living Inc, hereby authorized Intertek Testing Services Shenzhen Ltd. Guangzhou Branch to act as our Agent for the purpose of preparing application for FCC ID number 2AUHG-FLR-CL) under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is 2023-12-14. The Limited Agency Agreement expires on 2024-03-19, unless sooner terminated or extended by written notice to Intertek Testing Services Shenzhen Ltd. Guangzhou Branch and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, [Signature] [Printed Name] Mathieu Seguin [Type Title] Engineering & QC Director [Company name] Artika For Living Inc

1(1) 2023-12-19 Attention: Application Examiner RE: Request for Confidentiality Applicant: Artika For Living Inc FCC ID: 2AUHG-FLR-CL To Whom It May Concern: Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request is hereby submitted by Artika For Living Inc to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Detailed Block Diagrams • Detailed Operational/Functional Description Rationale for request for confidentiality: Artika For Living Inc has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] If you have questions or need further information, please contact the undersigned. Sincerely, [Signature] [Printed Name] Mathieu Seguin [Type Title] Engineering & QC Director [Company name] Artika For Living Inc

52mm 30mm 30mm 85mm This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation. Este dispositivo cumple con la Parte 15 de las Reglas de la FCC.Su operación está sujeta a las siguientes dos condiciones: (1) Este dispositivo no debe causar interferencia dañina y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo aquella que pueda causar una operación indeseada. Cet appareil est déclaré conforme à la Section 15 du règlement de la FCC.Son fonctionnement est assujetti aux deux conditions suivantes: (1)L'appareil ne doit pas causer d'interférences dangereuses et (2) il doit résister à tout type d'interférences,y compris les interférences qui peuvent causer un fonctionnement non désiré. MODEL/MODÈLE/MODELO: FLR-CL-BL For use with Class 2, 24V ,max 0.5A power supply FCC ID :2AUHG-FLR-CL CAN ICES-005(B)/NMB-005(B) MADE IN CHINA/FABRIQUÉ EN CHINE/HECHO EN CHINA DATE/DATE/FECHA :01.2024 3189405 US C CONFORMS TO UL STD. 153 CONFORME À LA NORME UL153 CONFORME AL STD. UL 153 CERTIFIED TO CSA STD. C22.2 No. 250.4 CERTIFI É SELON LA NORME CSA C22.2 NO. 250.4 CERTIFICADO AL STD. CSA C22.2 No. 250.4 Pour une utilisation avec une alimentation de class 2, 24V ,max 0.5A Power/Puissance/Potencia: 8.5W PO-36426 This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation. Este dispositivo cumple con la Parte 15 de las Reglas de la FCC.Su operación está sujeta a las siguientes dos condiciones: (1) Este dispositivo no debe causar interferencia dañina y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo aquella que pueda causar una operación indeseada. Cet appareil est déclaré conforme à la Section 15 du règlement de la FCC.Son fonctionnement est assujetti aux deux conditions suivantes: (1)L'appareil ne doit pas causer d'interférences dangereuses et (2) il doit résister à tout type d'interférences,y compris les interférences qui peuvent causer un fonctionnement non désiré. PO-36426 MODEL/MODÈLE/MODELO: FLR-CL-BL For use with Class 2, 24V ,max 0.5A power supply FCC ID :2AUHG-FLR-CL CAN ICES-005(B)/NMB-005(B) MADE IN CHINA/FABRIQUÉ EN CHINE/HECHO EN CHINA DATE/DATE/FECHA :01.2024 3189405 US C CONFORMS TO UL STD. 153 CONFORME À LA NORME UL153 CONFORME AL STD. UL 153 CERTIFIED TO CSA STD. C22.2 No. 250.4 CERTIFI É SELON LA NORME CSA C22.2 NO. 250.4 CERTIFICADO AL STD. CSA C22.2 No. 250.4 Pour une utilisation avec une alimentation de class 2, 24V ,max 0.5A Power/Puissance/Potencia: 8.5W

ARTIKA FOR LIVING INC TEST REPORT SCOPE OF WORK EMC TESTING–TF22146(FLR-CL-XXXXXX) REPORT NUMBER 231215026GZU-001 ISSUE DATE [REVISED DATE] 29-December-2023 [---------------------] PAGES 15 DOCUMENT CONTROL NUMBER FCC Part 15:2021-a © 2022 INTERTEK TEST REPORT Room101/301/401/102/202/302/ 402/502/602/702/802, No. 7-2, Caipin Road, Huangpu District, Guangzhou, Guangdong, China Telephone: +86 20 8213 9688 Facsimile: +86 20 3205 7538 www.intertek.com.cn This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Room101/301/401/102/202/302/402/502/602/702/802, No. 7-2, Caipin Road, Huangpu District, Guangzhou, Guangdong, China Version: 09-November-2022 Page 2 of 15 FCC Part 15:2021-a Applicant Name & Address : ARTIKA FOR LIVING INC 1756 50th avenue, Lachine, Quebec, Canada H8T 2V5 Manufacturing Site : Dongguan City Tianhua Photoelectric Technology Co,. Ltd #3, 2nd Road Jinqianling Industrial Zone, Jitigang Village, Intertek Report No: FCC ID: 231215026GZU-001 2AUHG-FLR-CL Test standards CFR 47, FCC Part 15, Subpart B:2021 Sample Description Product : Clayton Floor lamp Model No. : TF22146(FLR-CL-XXXXXX) Remark:FLR-CL- followed by up to six characters, Suffix six characters can be described as XXXXXX, X can be A-Z and/or 0-9 or blank, for commerical use, none of the variables involve security. Such as different customer or different color. Electrical Rating : 120V/60Hz Serial No. Not Labeled Date Received : 15 December 2023 Date Test Conducted : 19 December 2023-21 December 2023 Prepared and Checked By Elena Lei Project Engineer Approved By: Dean Liu Project Engineer TEST REPORT Intertek Report No.: 231215026GZU-001 Version: 09-November-2022 Page 3 of 15 FCC Part 15:2021-a CONTENT TEST REPORT ....................................................................................................................... 1 CONTENT ......................................................................................................................... 3 1. TEST RESULTS SUMMARY ......................................................................................... 4 2. EMC RESULTS CONCLUSION...................................................................................... 5 3. LABORATORY MEASUREMENTS ................................................................................ 6 4. EQUIPMENT USED DURING TEST .............................................................................. 7 5. EMI TEST .................................................................................................................. 9 5.1 CONDUCTED DISTURBANCE VOLTAGE AT MAINS PORTS ......................................................... 9 5.1.1 Block Diagram of Test Setup ............................................................................... 9 5.1.2 Test Setup and Procedure ................................................................................... 9 5.1.3 Limit .................................................................................................................. 10 5.1.4 Test Data and curve .......................................................................................... 11 5.2 RADIATED EMISSION 30 MHZ -1000 MHZ ...................................................................... 13 5.2.1 Block Diagram of Test Setup ............................................................................. 13 5.2.2 Test Setup and Procedure ................................................................................. 13 5.2.3 Limit .................................................................................................................. 14 5.2.4 Test Data and Curve ......................................................................................... 14 5.3 RADIATED EMISSION ABOVE 1 GHZ ................................................................................. 15 TEST REPORT Intertek Report No.: 231215026GZU-001 Version: 09-November-2022 Page 4 of 15 FCC Part 15:2021-a 1. TEST RESULTS SUMMARY Classification of EUT: Class B Test Item Standard Result Conducted disturbance voltage at mains ports CFR 47, FCC Part 15, Subpart B Pass Radiated emission (30 MHz–1 GHz) CFR 47, FCC Part 15, Subpart B Pass Radiated emission (Above 1 GHz) CFR 47, FCC Part 15, Subpart B N/A Remark: Reference publication is used for methods of measurement: ANSI C63.4:2014 Remark: 1. The symbol “N/A” in above table means Not Applicable. 2. When determining the test results, measurement uncertainty of tests has been considered. TEST REPORT Intertek Report No.: 231215026GZU-001 Version: 09-November-2022 Page 5 of 15 FCC Part 15:2021-a 2. EMC RESULTS CONCLUSION RE: EMC Testing Pursuant to FCC part 15 performed on the Clayton Floor lamp, Models: TF22146(FLR-CL-XXXXXX). Remark:FLR-CL- followed by up to six characters, Suffix six characters can be described as XXXXXX, X can be A-Z and/or 0-9 or blank, for commerical use, none of the variables involve security. Such as different customer or different color. We tested the Clayton Floor lamp, Models: TF22146 (FLR-CL-BL), to determine if it was in compliance with the r…

Text truncated - open the document above for the full version.

Conducted Emission Radiated Emission (30MHz-1GHz) Remark: The EUT is center on the turntable, due to the edge of desk placed on the diameter of the turntable.