2AUHG-FM-ECECHO Flushmount

Made in China Fabriqué en Chine Hecho en China Residential use only Usage résidentiel seulement Uso residencial solamente Indoor use only Usage intérieur seulement Uso interiores solamente LED ceiling light - Echo TM INSTRUCTION MANUAL IMPORTANT: READ CAREFULLY AND KEEP. Plafonnier à DEL - Echo MC MANUEL D’INSTRUCTIONS IMPORTANT : À LIRE ATTENTIVEMENT ET À CONSERVER. Lámpara LED de techo - Echo MR MANUAL DE INSTRUCCIONES IMPORTANTE: LEER DETENIDAMENTE Y CONSERVAR. Model / Modèle / Modelo: FM-EC Rev. 09-12-2020 2 INCLUDED HARDWARE MATÉRIEL INCLUS HERRAMIENTAS INCLUIDO ITEM PIÈCE PIEZA DESCRIPTION DESCRIPTION DESCRIPCIÓN QUANTITY QUANTITÉ CANTIDAD A Mounting bracket Support de montage Soporte de montaje × 1 B Junction box screw Vis de boitier de raccordement Tornillo de caja de conexiones × 2 C Wire connector Capuchon de connexion Conector de cable × 3 D Retaining screw Vis de fixation Tornillo de fijación × 2 E LED ceiling light with canopy assembled Plafonnier à DEL avec base assemblée Lámpara LED para techo con dosel ensamblado × 1 3 STEP-BY-STEP INSTALLATION INSTALLATION DÉTAILLÉE INSTALACIÓN ETAPA POR ETAPA Screwdriver Tournevis 2 Destornillador WHAT YOU WILL NEED VOUS AUREZ BESOIN LO QUE NECESITARÁ A B C D E 4 WARNING: Risk of electrical shock. Turn off breaker at the panel. Switch off the main electrical supply from the fuse box/ circuit breaker before installing the unit or doing any maintenance. Do not use outdoor. AVERTISSEMENT: Risque de décharge électrique. Éteindre le disjoncteur sur le panneau électrique. Il est important de couper l’alimentation électrique du disjoncteur avant de procéder à l’installation ou à l’entretien. Ne pas utiliser à l’extérieur. ADVERTENCIA: Riesgo de descarga eléctrica. Desconectar la corriente eléctrica del panel (disyuntor). Desconecte la instalación eléctrica en la caja de circuitos/ disyuntor antes de instalar esta unidad o realizar tareas de mantenimiento en ella. No usar en exteriores. CAUTION If using a dimmer, it must be LED compatible. IMPORTANT The installer and/or user must read, understand and follow these instructions before installing the product. This product must be properly installed before it is used. If instructions are not followed, the manufacturer will not be held responsible for any problems or product malfunction. Failure to follow installation and/or operating instructions voids the warranty. We recommend that this product be installed by a certified electrician. In some states or provinces, it is a legal requirement for this type of product to be installed by a certified electrician, according to the electrical and building codes effective in the region where the unit is used. ATTENTION Si un gradateur est utilisé, celui-ci doit être compatible avec les lumières à DEL. IMPORTANT Avant l’installation de ce produit, l’utilisateur et/ou l’installateur doit avoir lu et compris ces instructions. Cet appareil doit être installé convenablement avant usage. Si ces instructions ne sont pas respectées, le fabricant ne pourra être tenu responsable d’aucun problème ou de dysfonctionnement du produit. Le non-respect des instructions d’installation et/ou d’utilisation annulera la garantie en vigueur. Nous recommandons que ce produit soit installé par un électricien certifié. Dans certains États ou provinces, il est légalement requis que ce type de produit soit installé par un électricien certifié conformément aux codes de l’électricité et du bâtiment en vigueur. ATENCIÓN Si utiliza un regulador, debe asegurarse de que es compatible con las luces LED. IMPORTANTE El instalador o usuario debe leer detenidamente las instrucciones antes de instalar el producto y seguirlas fielmente. El producto debe estar correctamente instalado antes de su utilización. Si no siguen las instrucciones, el fabricante no se hará responsable de problemas o de un funcionamiento incorrecto del producto. Si no sigue las instrucciones de instalación o de uso, se anulará la garantía. Le recomendamos que el producto sea instalado por un electricista certificado. En algunos estados o provincias, se requiere por ley que este tipo de producto sea conectado por un electricista certificado siguiendo los códigos eléctricos y arquitectónicos de la región. CAUTION ATTENTION ATENCIÓN 5 MOUNTING BRACKET INSTALLATION INSTALLATION DU SUPPORT DE MONTAGE INSTALACIÓN DEL SOPORTE DE MONTAJE 1 A B 6 Black (L) Noir (L) Negro (L) White (N) Blanc (N) Blanco (N) Ground wire (G) Fil de mise à la terre (G) Cable de tierra (G) CONNECTING THE WIRES AND FINAL INSTALLATION CONNEXION DES FILS ET INSTALLATION FINALE CONEXIÓN DE LOS CABLES E INSTALACIÓN FINAL 2 A D 7 8 Operation is subject to the following two conditions: 1. this device may not cause interference, and 2. this device must accept any inteference, including inteference that may cause undesired operation of the device. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage; et 2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. La operación está sujeta a las dos condiciones siguientes: 1. este dispositivo no puede causar interferencias perjudiciales, y 2. este dispositivo debe aceptar cualquier interferencia recibida, incluídas las interferencias que puedan provocar un funcionamiento no deseado. CANADA (IC) 9 WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received,including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are …

Text truncated - open the document above for the full version.

ARTIKA FOR LIVING INC. 1756 50th Avenue Lachine, Quebec H8T 2V5 Canada Tel: 514-803-6475 FCC ID: 2AUHG-FM-EC POWER OF ATTORNEY 2020/12/29 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize ITL Co., Ltd. (MR. Pauler LI, Manager) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by ITL Co., Ltd. (MR. Pauler LI, Manager) on our behalf shall have the same effect as acts of our own. This authorization expires on 2021/05/29. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, (ARTIKA FOR LIVING INC.), are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, (ARTIKA FOR LIVING INC.) <SIGNATURE> (Mirjana Djuric) (General Manager)

ARTIKA FOR LIVING INC. 1756 50th Avenue Lachine, Quebec H8T 2V5 Canada Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. ARTIKA FOR LIVING INC. would like the following documents regarding this submission for FCC ID: 2AUHG-FM-EC to be kept confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term Permanent External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Permanent Test Setup Photos Short Term Permanent* User’s Manual The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days. Sincerely, By: _________________________ _ Mirjana Djuric (Signature) (Print name) Title: General Manager On behalf of: ARTIKA FOR LIVING INC. (Company Name) Telephone: 514-803-6475

Page 1 of 5 External PHOTO: FCC ID: 2AUHG-FM-EC Page 2 of 5 Page 3 of 5 Page 4 of 5 Page 5 of 5

Label location

Page 1 of 2 Internal PHOTO: FCC ID: 2AUHG-FM-EC Page 2 of 2

ITL Page 1 of 19 Report. No. D201215004 This report is for the exclusive use of ITL’s client and is provided pursuant to the agreement between ITL assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the ITL name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by ITL. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an ITL certification program. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. TEST REPORT Applicant: ARTIKA FOR LIVING INC. Address of Applicant: 1756 50th Avenue Lachine, Quebec H8T 2V5 Canada Manufacturer: GUANGDONG CHENGCEE LIGHTING CO., LTD Address of Manufacturer: No.8 East Shengfeng Xiangsheng Road, Xiaolan, Zhongshan, Guangdong, China Product name: ECHO Flushmount Model: FM-EC-XXXXXX “XXXXXX” can be 0 to 9 and/or A to z and/or blank (commercial code) Rating(s): AC 120V, 60Hz, 20W Trademark: ARTIKA Standards: FCC Part15 subpart B：2020 FCC ID: 2AUHG-FM-EC Date of Receipt: 2020-12-14 Date of Test: 2020-12-14~2020-12-29 Date of Issue: 2020-12-30 Test Result Pass* * In the configuration tested, the test item complied with the standards specified above. Authorized for issue by: Test by: Reviewed by: Dec.30, 2020 Eleven Liang Dec.30, 2020 Pauler Li Project Engineer Project Manager Date Name/Position Signature Date Name/Position Signature ITL Page 2 of 19 Report. No. D201215004 This report is for the exclusive use of ITL’s client and is provided pursuant to the agreement between ITL assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the ITL name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by ITL. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an ITL certification program. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. Testing Laboratory information: Testing Laboratory Name .......... : ITL Co., LTD Address ..................................... : No.8, Jinqianling Street 5, Huangjiang, Dongguan, Guangdong, China. Testing location ......................... : Same as above Tel ................................................ : 0086-769-39001678 Fax .............................................. : 0086-20-62824387 E-mail .......................................... : [email protected] Possible test case verdicts: - test case does not apply to the test object .. : N/A - test object does meet the requirement ........ : P (Pass) - test object does not meet the requirement . : F (Fail) General remarks: The test results presented in this report relate only to the object tested. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. This report would be invalid test report without all the signatures of testing technician and approver. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. General product information: FM-EC-XXXXXX “XXXXXX” can be 0 to 9 and/or A to z and/or blank (commercial code) All models are identical with each other except for model designation. All tests were performed on the model FM-EC as representative. ITL Page 3 of 19 Report. No. D201215004 This report is for the exclusive use of ITL’s client and is provided pursuant to the agreement between ITL assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the ITL name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by ITL. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an ITL certification program. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. Test Summary: The following standards have been applied to ensure the product conforms with the protection requirements of the council directive FCC part 15B Electromagnetic Emissions Test Item Test Standard Test Method Class/Severity Result Conducted Emission(0.15-30MHz) FCC part 15.107 ANSI C63.4: 2014 Class B PASS Radiated Emission(30-1000MHz) FCC part 15.109 ANSI C63.4: 2014 Class B PASS Test Location All the tests were performed in ITL Co., LTD. Where is located at at No.8, Jinqianling Street 5, Huangjiang, Dongguan, Guangdong, China. Tel: 0086-769-39001678, Fax: 0086-20-62824387 No test is subcontracted Test Facility The test facility is recognized, certified, or accredited by the following organizations:  CNAS Lab code:L9342  FCC Designation No.:CN5035  IC Registration NO.: 12593A  NVLAP LAB CODE: 600199-0 ITL Page 4 of 19 Report. No. D20121500…

Text truncated - open the document above for the full version.

Page 1 of 1 TEST PHOTO: