2AUHG-SCO-GA5CGamma LED sconce 5CCT light

Made in China Fabriqué en Chine Hecho en China Residential use only Usage résidentiel seulement Uso residencial solamente Indoor use only Usage intérieur seulement Uso interiores solamente LED wall light - Gamma TM INSTRUCTION MANUAL IMPORTANT: READ CAREFULLY AND KEEP. Luminaire mural á DEL - Gamma MC MANUEL D’INSTRUCTIONS IMPORTANT : À LIRE ATTENTIVEMENT ET À CONSERVER. Luminaria LED de pared - Gamma MR MANUAL DE INSTRUCCIONES IMPORTANTE: LEER DETENIDAMENTE Y CONSERVAR. Model / Modèle / Modelo: SCO-GA5C-BL / SCO-GA5C-BN Rev. 08-21-2024 2 WHAT YOU WILL NEED VOUS AUREZ BESOIN LO QUE NECESITARÁ INCLUDED HARDWARE MATÉRIEL INCLUS HERRAMIENTAS INCLUIDAS Item Pièce Pieza Description Description Descripción Quantity Quantité Cantidad A Mounting bracket Support de montage Soporte de montaje × 1 B Junction box screw Vis de boitier de raccordement Tornillo de caja de conexiones × 2 C Wire connector Capuchon de connexion Conector de cable × 3 D Canopy screw Vis de la base Tornillo del dosel × 2 + 1 extra E LED wall light Luminaire mural á DEL Luminaria LED de pared × 1 Screwdriver Tournevis Destornillador 3 STEP-BY-STEP INSTALLATION INSTALLATION DÉTAILLÉE INSTALACIÓN ETAPA POR ETAPA A B C DE 4 CAUTION ATTENTION ATENCIÓN WARNING: Risk of electrical shock. Turn off breaker at the panel. Switch off the main electrical supply from the fuse box/circuit breaker before installing the unit or doing any maintenance. Do not use outdoor. AVERTISSEMENT: Risque de décharge électrique. Éteindre le disjoncteur sur le panneau électrique. Il est important de couper l’alimentation électrique du disjoncteur avant de procéder à l’installation ou à l’entretien. Ne pas utiliser à l’extérieur. ADVERTENCIA: Riesgo de descarga eléctrica. Desconectar la corriente eléctrica del panel (disyuntor). Desconecte la instalación eléctrica en la caja de circuitos/disyuntor antes de instalar esta unidad o realizar tareas de mantenimiento en ella. No usar en exteriores. CAUTION If using a dimmer, it must be LED compatible. IMPORTANT The installer and/or user must read, understand and follow these instructions before installing the product. This product must be properly installed before it is used. If instructions are not followed, the manufacturer will not be held responsible for any problems or product malfunction. Failure to follow installation and/or operating instructions voids the warranty. We recommend that this product be installed by a certified electrician. In some states or provinces, it is a legal requirement for this type of product to be installed by a certified electrician, according to the electrical and building codes effective in the region where the unit is used. ATTENTION Si un gradateur est utilisé, celui-ci doit être compatible avec les lumières à DEL. IMPORTANT Avant l’installation de ce produit, l’utilisateur et/ou l’installateur doit avoir lu et compris ces instructions. Cet appareil doit être installé convenablement avant usage. Si ces instructions ne sont pas respectées, le fabricant ne pourra être tenu responsable d’aucun problème ou de dysfonctionnement du produit. Le non-respect des instructions d’installation et/ou d’utilisation annulera la garantie en vigueur. Nous recommandons que ce produit soit installé par un électricien certifié. Dans certains États ou provinces, il est légalement requis que ce type de produit soit installé par un électricien certifié conformément aux codes de l’électricité et du bâtiment en vigueur. ATENCIÓN Si utiliza un regulador, debe asegurarse de que es compatible con las luces LED. IMPORTANTE El instalador o usuario debe leer detenidamente las instrucciones antes de instalar el producto y seguirlas fielmente. El producto debe estar correctamente instalado antes de su utilización. Si no siguen las instrucciones, el fabricante no se hará responsable de problemas o de un funcionamiento incorrecto del producto. Si no sigue las instrucciones de instalación o de uso, se anulará la garantía. Le recomendamos que el producto sea instalado por un electricista certificado. En algunos estados o provincias, se requiere por ley que este tipo de producto sea conectado por un electricista certificado siguiendo los códigos eléctricos y arquitectónicos de la región. 5 MOUNTING BRACKET INSTALLATION INSTALLATION DU SUPPORT DE MONTAGE INSTALACIÓN DEL SOPORTE DE MONTAJE 1 A B 6 2 A C E Black (L) Noir (L) Negro (L) White (N) Blanc (N) Blanco (N) Ground wire (GND) Fil de mise à la terre (GND) Cable de tierra (GND) WIRE CONNECTION CONNEXION DES FILS CONEXIÓN DE LOS CABLES 7 D FINAL INSTALLATION / SELECTABLE WHITE TECHNOLOGY INSTALLATION FINALE / TECHNOLOGIE DE BLANC AJUSTABLE INSTALACIÓN FINAL / TECNOLOGÍA DE BLANCO AJUSTABLE 3 5 selectable light colors 5 couleurs de lumière réglables 5 colores de luz ajustables Switch Interrupteur Interruptor 8 Operation is subject to the following two conditions: 1. this device does not cause interference, and 2. this device must accept any interference received, including inteference that may cause undesired operation. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire d’interférences; et 2. l’appareil doit accepter toute interférence, même si ces interférences sont susceptibles d’en compromettre le fonctionnement. La operación está sujeta a las dos condiciones siguientes: 1. este dispositivo no puede causar interferencias, y 2. este dispositivo debe aceptar cualquier interferencia recibida, incluidas las interferencias que puedan provocar un funcionamiento no deseado. CANADA (IC) WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device does not cause harmful interference, and 2. this device must accept any interference received,including interference that may cause undesired operation. NOTE:…

Text truncated - open the document above for the full version.

Certification designating a U.S. Agent for service of process: A s required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept servi ce o f process. iii. Provide a physical U.S. address and email for the designated agent. iv . Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. U nofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: T he Agent for Process of Service: •cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) •cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) •Agent can be Individual Entity or a Company Entity •Agent Entity must be located in US, US address/phone •Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) •Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE:The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Co mpany name: Artika For Living Inc. Grantee Code: 2AUHG Contact Name: Mathieu Seguin Street Address: 1756 50 th avenue, City/Province/Zip: Montreal (Lachine)/ Quebec/ Canada/ H8T 2V5 FCCID:2AUHG-SCO-GA5C Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan J Grinager Street Add ress: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: April 09, 2024 Signed by (Printed Name/Title): Nathan J Grinager / Co-President *This letter must be dated within 1-y ear o f t he da t e t he application is submitted to the TCB for device certification Applicant Signature: Date: 2024-04 -09 Si g ned by (Printed Name/Title): Mathieu Seguin/ Engineering and Quality Control Director

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-9-18> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2AUHG-SCO-GA5C SCO-GA5C-BL For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Mathieu Seguin/Engineering & QC Director Company: ARTIKA FOR LIVING INC Address: 1756 50th avenue, Lachine Quebec H8T 2V5 Canada Phone: 514-883-8699 Fax: 514-636-7666 E-Mail: [email protected]

FCC ID: 2AUHG-SCO-GA5C Page 1 of 2 Report No.: LCSA08014308E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao’an District, Shenzhen, Guangdong, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity EUT Constructional Details (External Photos) FCC ID: 2AUHG-SCO-GA5C Page 2 of 2 Report No.: LCSA08014308E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao’an District, Shenzhen, Guangdong, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity

Page 1 of 1 FCC ID: 2AUHG-SCO-GA5C Label and Location Size: L: 6.0cm*W: 3.0cm Gamma LED sconce 5CCT light Model No.: SCO-GA5C-BL FCC ID : 2AUHG-SCO-GA5C This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Location

FCC ID: 2AUHG-SCO-GA5C Page 1 of 1 Report No.: LCSA08014308E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao’an District, Shenzhen, Guangdong, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity EUT Constructional Details (Internal Photos)

Serial number Component part numberProduct NameComposition dosage card address 0010D10S20400250TD01 SMD semi-finished 10W thyristor dimming LED (108- 135ac) 27-40V \ 0.25A 1D-BOM 0020EC104NTKP0011W04 Polypropylene film capacitor 100nF ± 5% \ 400V \ 105 °C \ T ≤ 5.0mm \ P7.5mm \ Short leg 3.5 ± 0.5mm \ CBB21 2C1 C2 0030EC224NTKP0011W04 Polypropylene film capacitor 220nF ± 5% \ 400V (actual 250V) \ 105 °C \ T ≤ 5.2mm \ P7.5mm \ Short leg 3.5 ± 0.5mm \ CBB22 1C3 0040EC827FBMW0Y29A06 Electrolytic capacitor 820uF ± 20% \ 50V \ LOW ERS \ Ripple current: 2084mA \ 105 °C \ 13 * 19mm MAX \ P5mm \ TY \ Lifespan: 10000H \ PET \ Bulk (internal processing) 1EC1 0050EC225NCMW0A20A06 Electrolytic capacitor 2.2uF ± 20% \ 400V \ 125 °C \ 6.3x11mm \ Ripple current: 72MA \ P2.5mm \ Okep RH \ Lifespan: 5000H \ Bulk long leg (internal processing) 1EC2 0060EFV7D47100L12ZZZ Varistor \ 07D471K \ 125 °C \ D=9T=6-pin distance 5.0MM \ short pin 3.5 ± 0.5mm \ HEL 1MOV1 0070EL31801020031A00 I-shaped inductor 6 * 10 (center column 3.0mm) P3.0mm \ Φ 0.16mm \ 1.8mH \ vacuum immersion \ black heat shrink tubing \ short leg 3.5 ± 0.5mm 1L1 0080EL40905030020000 Loop inductor \ T9 * 5 * 3 \ Φ 0.35 \ 15TS \ 1.2mH \ MIN \ Double wire parallel winding \ Three layer insulated wire \ Natural color (5mm long leg, stripped and tinned 3.5mm, fixed with black glue) \ Manganese core green ring 1LF1 0090EL83002020011A00 EE8.3 Common Mode Inductance \ Φ 0.13-100TS \ 20mH \ Min \ \ Label: EE8.3-01 1LF2 0095ER2208JER0010000 W ire wound resistor fuse \ 2.2R \ 5% \ 2W S \ Vertical F- type \ Copper foot \ Short foot 3.5 ± 0.5mm 2R1 R2 0100ER2700FEX0010000 MO Metal Oxide Film Resistance \ 270R \ 5% \ 2W S \ Vertical F-Type \ Copper Pin \ Short Pin 3.5 ± 0.5mm 1R5 0110ER3008JER0020000 W ire wound resistor fuse \ 3R \ 5% \ 2W S \ Vertical F-type \ Copper foot \ Short foot 3.5 ± 0.5mm 1FR1 0130ET00EE17018A1000 Transformer \ EE1710 Vertical Extension 3+2+2 \ 15W Controllable Silicon Dimming LED \ 1.05mH \ BQ-15TD- 0375 (48.5 \ 33 \ 23.5TS) 1T1 0140UF200009AY010000 Fireproof adhesive paper \ 20 * 0.025mm \ 94V0 \ Polyester tape \ Yellow \ 4.2KV \ 50M/MOLL 0.066FOR EC1 0150WS0600013S010000 Tin plated copper wire (jumper) \ 0.6mm \ Silver (using 0.0025g copper wire for 1mm) 0.086JP1 JP2 0010ER3608FTS0010000 SMD resistor \ 3.6R \ 1% \ 1206 1.000RS1 0020ER3308FTS0010000 SMD resistor \ 3.3R \ 1% \ 1206 1.000RS2 0030ER2202FSS0010000 SMD resistor \ 22K \ 1% \ 0805 1.000R3 0040ER3302JSS0010000 SMD resistor \ 33K \ 5% \ 0805 1.000R6 0045ER3609JSS0010000 SMD resistor \ 36R \ 5% \ 0805 1.000R7 0050ER1009JSS0010000 SMD resistor \ 10R \ 5% \ 0805 1.000R9 0060ER1104FTS0010000 SMD resistor \ 1.1M \ 1% \ 1206 2.000R10 R12 0070ER1002JTS0010000 SMD resistor \ 10K \ 5% \ 1206 1.000R13 0080ER1000JTS0010000 SMD resistor \ 100R \ 5% \ 1206 1.000R14 0090ER5602JTS0010000 SMD resistor \ 56K \ 5% \ 1206 2.000R15 R16 0100ER4701JSS0010000 SMD resistor \ 4.7K \ 5% \ 0805 1.000RL1 0110EC102UXKD0A12ZZZ SMD capacitor \ 1nF ± 5% \ 1KV \ \ NPO \ 1206 \ Brand: YAGEO 1.000C4 0120EC101UNKD0A11ZZZ SMD capacitor \ 100pF ± 5% \ 1KV \ NPO \ 1206 \ Brand: YAGEO 1.000C6 0140EDA70000SB021ZZZ Ordinary rectifier diode SMD \ A7/1000V1A \ SOD-123FL \ EDA 2.000D1 D3 0150EDK02200SB010ZZZ Quick Recovery Diode SMDES2D2A20VDO-214AC (SMA) EDA 1.000D2 0160EQM4N650EB022ZZZ SMD-MOSFET-N\HRH4N65AD\A\650V\Rds:3.1 Ω \TO- 252Iron seal 1.000Q1 0170ESBP3288HB020ZZZ IC\BP3288\SOP-8 1.000U1 0180EC222NCMY0C25000 Y1 capacitor \ SMD \ 2200pF ± 20% \ 400V \ 125 °C \ P10mm \ Surface mount Y capacitor 1.000CY1 0190EDABS100S0P10ZZZ Bridge pile SMD \ ABS10 \ ABS \ chip: 50 (ringing wave 2.5KV \ lightning strike 1KV) 1.000BD1 0200PS01500170021000 PCB board \ 15W thyristor dimming LED \ 60X32.3X1.2mm \ single-sided \ OSP (anti-oxidation) \ green oil surface white background black text \ 22F \ 1OZ \ PCB1502 \ REV: 1.1 \ E347659 (red glue process) 1.000PCB

FCC ID: 2AUHG-SCO-GA5C Page 1 of 16 Report No.: LCSA08014308E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For ARTIKA FOR LIVING INC Gamma LED sconce 5CCT light Test Model: SCO-GA5C-BL Additional Model No.: SCO-GA5C-XXXXXX(“XXXXXX” can be A to Z and/or 0 to 9 and/or blank (commercial code)) Prepared for : ARTIKA FOR LIVING INC Address : 1756 50th avenue, Lachine, Qc, Canada H8T 2V5 Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : +(86) 0755-82591330 Fax : +(86) 0755-82591332 Web : www.lcs-cert.com Mail : [email protected] Date of receipt of test sample : August 22, 2024 Number of tested samples : 1 Serial number : Prototype Sample No. : H240812001001 Date of Test : August 22, 2024 to August 24, 2024 Date of Report : August 24, 2024 FCC ID: 2AUHG-SCO-GA5C Page 2 of 16 Report No.: LCSA08014308E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity TEST REPORT Report No. ...................................... : LCSA08014308E Date of Issue .................................... : August 24, 2024 Testing Laboratory Name ............... : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ............................................ : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure ............ : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ........................... : ARTIKA FOR LIVING INC Address ............................................ : 1756 50th avenue, Lachine, Qc, Canada H8T 2V5 Test Specification Standard .......................................... : FCC 47 CFR Part 15, Subpart B ANSI C63.4-2014 Test Report Form No. ...................... : TRF-4-E-010 A/0 TRF Originator ................................. : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ...................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ................... : Gamma LED sconce 5CCT light Trade Mark ....................................... : Artika Test Model ....................................... : SCO-GA5C-BL Result .............................................. : Positive Compiled by: Supervised by: Approved by: Emma wang / File Administrator Cary Luo/ Technique principal Gavin Liang / Manager FCC ID: 2AUHG-SCO-GA5C Page 3 of 16 Report No.: LCSA08014308E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity TEST REPORT Test Report No.: LCSA08014308E August 24, 2024 Date of issue Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Model ............................. : SCO-GA5C-BL EUT ........................................ : Gamma LED sconce 5CCT light Applicant ................................ : ARTIKA FOR LIVING INC Address .................................. : 1756 50th avenue, Lachine, Qc, Canada H8T 2V5 Telephone .............................. : / Fax ......................................... : / Manufacturer .......................... : ZHONGSHAN C5 LIGHTING CO. LTD Address .................................. : 1# Henglong Road, Tongyi Industrial Area, Cao San, Guzhen, Zhongshan, Guangdong, China. Telephone .............................. : / Fax ......................................... : / Factory ................................... : ZHONGSHAN C5 LIGHTING CO. LTD Address .................................. : 1# Henglong Road, Tongyi Industrial Area, Cao San, Guzhen, Zhongshan, Guangdong, China. Telephone .............................. : / Fax ......................................... : / FCC ID: 2AUHG-SCO-GA5C Page 4 of 16 Report No.: LCSA08014308E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Revision History Report Version Issue Date Revision Content Revised By 000 August 24, 2024 Initial Issue / FCC ID: 2AUHG-SCO-GA5C Page 5 of 16 Report No.: LCSA08014308E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity TABLE OF CONTENTS Test Report Description Page 1. SUMMARY OF STANDARDS AND RESULTS ...........…

Text truncated - open the document above for the full version.

FCC ID: 2AUHG-SCO-GA5C Page 1 of 1 Report No.: LCSA08014308E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao’an District, Shenzhen, Guangdong, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Setup Photos Conducted emissions on AC mains Radiated emissions (Below 1GHz)