2AUHG-UCL-ACCPBAAccent 3 CCT, rechargeable 3PK

Made in China Fabriqué en Chine Hecho en China Residential use only Usage résidentiel seulement Uso residencial solamente Indoor use only Usage intérieur seulement Uso interiores solamente Pack of 3 LED closet lights - Accent TM INSTRUCTION MANUAL IMPORTANT: READ CAREFULLY AND KEEP. Ensemble de 3 éclairages à DEL pour penderie - Accent MC MANUEL D’INSTRUCTIONS IMPORTANT : À LIRE ATTENTIVEMENT ET À CONSERVER. Paquete de 3 luces LED para armario - Accent MR MANUAL DE INSTRUCCIONES IMPORTANTE: LEER DETENIDAMENTE Y CONSERVAR. Model / Modèle / Modelo: UCL-ACCPBA Rev. 04-09-2024 2 ITEM PIÈCE PIEZA DESCRIPTION DESCRIPTION DESCRIPCIÓN QUANTITY QUANTITÉ CANTIDAD A Double sided tape puck Pastille adhésive double face Cinta adhesiva de doble cara × 3 B Metal base Base métallique Base metálica × 3 C Mounting screw Vis de montage Tornillo de montaje × 3 D Magnetic LED closet light DEL magnétique pour penderie lámpara magnética LED para armario × 3 E USB-C Power wire (50 cm / 19.7 in) Câble électrique USB-C (50 cm / 19.7 po) Cable eléctrico USB-C (50 cm / 19.7 pulg) × 1 WHAT YOU WILL NEED VOUS AUREZ BESOIN LO QUE NECESITARÁ Screwdriver Tournevis Destornillador INCLUDED HARDWARE MATÉRIEL INCLUS HERRAMIENTAS INCLUIDAS 3 STEP-BY-STEP INSTALLATION INSTALLATION DÉTAILLÉE INSTALACIÓN ETAPA POR ETAPA A B Installation with double sided tape puck Installation avec pastille adhésive double face Instalación con cinta adhesiva de doble cara Installation with puck and mounting screw Installation avec la base métallique et vis de montage Instalación con base metálica y tornillo de montaje A B B C D D E E 4 Do not use outdoor.Ne pas utiliser à l’extérieur.No usar en exteriores. IMPORTANT The installer and/or user must read, understand and follow these instructions before installing the product. This product must be properly installed before it is used. If instructions are not followed, the manufacturer will not be held responsible for any problems or product malfunction. Failure to follow installation and/or operating instructions voids the warranty. We recommend that this product be installed by a certified electrician. In some states or provinces, it is a legal requirement for this type of product to be installed by a certified electrician, according to the electrical and building codes effective in the region where the unit is used. IMPORTANT Avant l’installation de ce produit, l’utilisateur et/ou l’installateur doit avoir lu et compris ces instructions. Cet appareil doit être installé convenablement avant usage. Si ces instructions ne sont pas respectées, le fabricant ne pourra être tenu responsable d’aucun problème ou de dysfonctionnement du produit. Le non-respect des instructions d’installation et/ou d’utilisation annulera la garantie en vigueur. Nous recommandons que ce produit soit installé par un électricien certifié. Dans certains États ou provinces, il est légalement requis que ce type de produit soit installé par un électricien certifié conformément aux codes de l’électricité et du bâtiment en vigueur. IMPORTANTE El instalador o usuario debe leer detenidamente las instrucciones antes de instalar el producto y seguirlas fielmente. El producto debe estar correctamente instalado antes de su utilización. Si no siguen las instrucciones, el fabricante no se hará responsable de problemas o de un funcionamiento incorrecto del producto. Si no sigue las instrucciones de instalación o de uso, se anulará la garantía. Le recomendamos que el producto sea instalado por un electricista certificado. En algunos estados o provincias, se requiere por ley que este tipo de producto sea conectado por un electricista certificado siguiendo los códigos eléctricos y arquitectónicos de la región. CAUTION ATTENTION ATENCIÓN 5 6 MOUNTING BRACKET INSTALLATION | MOUNTING SCREW INSTALLATION DU SUPPORT DE MONTAGE | VIS DE MONTAGE INSTALACIÓN DEL SOPORTE DE MONTAJE | TORNILLO DE MONTAGE 1A B C D 7 MOUNTING BRACKET INSTALLATION | MOUNTING SCREW INSTALLATION DU SUPPORT DE MONTAGE | VIS DE MONTAGE INSTALACIÓN DEL SOPORTE DE MONTAJE | TORNILLO DE MONTAGE 2A B D 8 MOUNTING BRACKET INSTALLATION | DOUBLE SIDED ADHESIVE INSTALLATION DU SUPPORT DE MONTAGE | ADHÉSIF DOUBLE FACE INSTALACIÓN DEL SOPORTE DE MONTAJE | ADHESIVO DE DOBLE CARA 1B A B 9 CLOSET LIGHT INSTALLATION | DOUBLE SIDED ADHESIVE INSTALLATION DE LA LUMIÈRE DE PENDERIE | ADHÉSIF DOUBLE FACE INSTALACIÓN DE LA LUZ DE ARMARIO | ADHESIVO DE DOBLE CARA 2B B D 10 NOTE: Rechargeable with USB-C connector 1 charge lasts up to 8 hours NOTE : Rechargeable avec connecteur USB-C 1 seule charge peut durer 8 heures NOTA: Recargable con conector USB-C 1 carga dura hasta 8 horas CONNECTION BRANCHEMENT CONEXIÓN 3 11 SENSOR FUNCTIONING FONCTIONNEMENT DU CAPTEUR FUNCIONAMIENTO DEL SENSOR 4 OFF ON MODE 1: Motion sensor + photocell MODE 1 : Capteur de mouvement + photocellule MODO 1: Sensor de movimiento + fotocélula MODE 2: Motion sensor only MODE 2 : Capteur de mouvement uniquement MODO 2: Solo sensor de movimiento 12 CLICK 5 SELECTABLE WHITE TECHNOLOGY TECHNOLOGIE DE BLANC AJUSTABLE TECNOLOGÍA DE BLANCO AJUSTABLE DIM/COLOR: Quick press: CCT selection (3000K, 4000K, 5000K) Press and hold: Dimming Appui rapide : Sélection de la température de couleur (3000K, 4000K, 5000K) Appuyer et maintenir : Gradation Pulsación rápida: Selección de temperatura de color (3000K, 4000K, 5000K) Mantenga pulsado: Atenuación MEMORY FUNCTION: Last selected CCT and dimming level are memorized automatically FONCTION MÉMOIRE : La dernière température de couleur et le niveau de gradation sélectionnés sont automatiquement mémorisés FUNCIÓN DE MEMORIA: La última temperatura de color seleccionada y el nivel de atenuación se recuerdan automáticamente 13 Operation is subject to the following two conditions: 1. this device may not cause interference, and 2. this device must accept any inteference, including inteference that may cause undesired operation of the device. L’exploitation est autorisée aux deux conditions suivantes : 1. l’a…

Text truncated - open the document above for the full version.

Certification designating a U.S. Agent for service of process: A s required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept servi ce o f process. iii. Provide a physical U.S. address and email for the designated agent. iv . Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. U nofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: T he Agent for Process of Service: •cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) •cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) •Agent can be Individual Entity or a Company Entity •Agent Entity must be located in US, US address/phone •Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) •Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE:The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the con clusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Compan y name: Artika For Living Inc. Grantee Code: 2AUHG Contact Name: Mathieu Seguin Street Address: 1756 50 th a v enue, City/Province/Zip: Montreal (Lachine)/ Quebec/ Canada/ H8T 2V5 FCCID:2AUHG-UCL-ACCPBA Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan J Grinager Street Ad dress: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: April 09, 2024 Signed by (Printed Name/Title): Nathan J Grinager / Co-President *This letter must be dated within 1-y ear o f t he da t e the application is submitted to the TCB for device certification Applicant Signature: Date: 2024-04 -09 Si gned by (Printed Name/Title): Mathieu Seguin/ Engineering and Quality Control Director

FCC ID: 2AUHG-UCL-ACCPBA Page 1 of 2 Report No.: LCSA08064175E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao’an District, Shenzhen, Guangdong, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity EUT Constructional Details (External Photos) FCC ID: 2AUHG-UCL-ACCPBA Page 2 of 2 Report No.: LCSA08064175E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao’an District, Shenzhen, Guangdong, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity

Page 1 of 1 FCC ID: 2AUHG-UCL-ACCPBA Label and Location Size: L: 3.0cm*W: 2.0cm Accent 3 CCT, rechargeable 3PK Model No.: UCL-ACCPBA FCC ID : 2AUHG-UCL-ACCPBA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Location

FCC ID: 2AUHG-UCL-ACCPBA Page 1 of 2 Report No.: LCSA08064175E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao’an District, Shenzhen, Guangdong, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity EUT Constructional Details (Internal Photos) FCC ID: 2AUHG-UCL-ACCPBA Page 2 of 2 Report No.: LCSA08064175E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao’an District, Shenzhen, Guangdong, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity

FCC ID: 2AUHG-UCL-ACCPBA Page 1 of 2 Report No.: LCSA08064175E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao’an District, Shenzhen, Guangdong, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Setup Photos Conducted emissions on AC mains Radiated emissions (Below 1GHz) FCC ID: 2AUHG-UCL-ACCPBA Page 2 of 2 Report No.: LCSA08064175E Shenzhen LCS Compliance Testing Laboratory Ltd. Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao’an District, Shenzhen, Guangdong, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity