2AUHG-VAN4RATDEssence 4 Vanity- Chrome

ARTIKA FOR LIVING INC Covered Equipment Certification Attestation Letter Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AUHG-VAN4RATD ARTIKA FOR LIVING INC certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. ARTIKA FOR LIVING INC certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Mathieu Seguin Title: Engineering & QC Director Company Name: ARTIKA FOR LIVING INC Date: 9/15/2023

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Da te: March 20, 2023 Signed by (Printed Name/Title): Nathan Grinager / Co-President *This letter must be dated within 1-year of the date the application is submitted to the TCB for device certification The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Artika For Living Inc. Grantee Code: 2AUHG Contact Name: Mathieu Seguin Street Address: 1756 50 th avenue, City/Province/Zip: Montreal (Lachine)/ Quebec/ Canada/ H8T 2V5 Telephone No: 1-514-88 3-8699 Email: [email protected] FRN #: 0028783116 Appl icant Signature: Da te: 2023-03-20 Signed by (Printed Name/Title): Mathieu Seguin/ Engineering and Quality Control Director

DATE : 2023-09-15 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Jason Wu of Global United Technology Services Co., Ltd.and No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with ARTIKA FOR LIVING INC and 1756 50th avenue, Lachine, Quebec, H8T2V5 Canada Signature: Name: Mathieu Seguin Title: Engineering & QC Director Company: ARTIKA FOR LIVING INC

DATE : 2023-09-15 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AUHG-VAN4RATD Product Name: Essence 4 Vanity- Chrome Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signature: Name: Mathieu Seguin Title: Engineering & QC Director Company: ARTIKA FOR LIVING INC

Differences Declaration To whom concern, We company ARTIKA FOR LIVING INC hereby declares: The product models VAN4RA-XXXXXX(The suffix “XXXXXX” can be A to Z and/or 0 to 9 and/or blank denotes commercial code.) are identical in the same PCB layout, interior structure and electrical circuits, the difference is model name for commercial purpose. Authorized signature: Date: September 15, 2023

Page 1 of 3 Page 2 of 3 Page 3 of 3

This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation. Este dispositivo cumple con la Parte 15 de las Reglas de la FCC.Su operación está sujeta a las siguientes dos condiciones: (1) Este dispositivo no debe causar interferencia dañina y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo aquella que pueda causar una operación indeseada. Cet appareil est déclaré conforme à la Section 15 du règlement de la FCC.Son fonctionnement est assujetti aux deux conditions suivantes: (1)L'appareil ne doit pas causer d'interférences dangereuses et (2) il doit résister à tout type d'interférences,y compris les interférences qui peuvent causer un fonctionnement non désiré. 30 85 FCC ID :2AUHG-VAN4RATD

Label location

Page 1 of 1

Global United Technology Services Co., Ltd. Report No.: GTSL2023090117F01 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 20 TEST REPORT Applicant: ARTIKA FOR LIVING INC Address of Applicant: 1756 50th avenue, Lachine, Quebec, H8T2V5 Canada Manufacturer/Factory: Foshan Topday Optoelectronics Technology Co.,Ltd. Address of Manufacturer/Factory: Huansheng Road,Guicheng Eastern Industrial Zone B,Sanshan Nanhai District,Foshan,China Equipment Under Test (EUT) Product Name: Essence 4 Vanity- Chrome Model No.: VAN4RA-XXXXXX (The suffix “XXXXXX” can be A to Z and/or 0 to 9 and/or blank denotes commercial code.) Trade Mark: ARTIKA FCC ID: 2AUHG-VAN4RATD Applicable standards: FCC CFR Title 47 Part 15 Subpart B Date of sample receipt: July 28, 2023 Date of Test: August 23, 2023 Date of report issued: August 23, 2023 Test Result : Pass * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSL2023090117F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 20 2 Version Version No. Date Description 00 August 23, 2023 Original Prepared by: Date: August 23, 2023 Project Engineer Reviewed by: Date: August 23, 2023 Reviewer Report No.: GTSL2023090117F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 20 3 Contents 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE AND TEST VOLTAGE .......................................................................................................... 5 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 5 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 5 5.5 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 5 5.6 TEST FACILITY .................................................................................................................................... 6 5.7 TEST LOCATION .................................................................................................................................. 6 6 TEST INSTRUMENTS LIST ..................................................................................................................... 7 7 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 7.1 RADIATED EMISSION ........................................................................................................................... 9 7.2 CONDUCTED EMISSIONS ................................................................................................................... 13 8 TEST SETUP PHOTO ............................................................................................................................ 16 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 17 Report No.: GTSL2023090117F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 20 4 Test Summary Test Item Test Requirement Test Method Class / Severity Result Conducted Emission FCC Part15.107 ANSI C63.4 Class B PASS Radiated Emissions # FCC Part15.109 ANSI C63.4 Class B PASS Remark: 1. Pass: The EUT complies with the essential requirements in the standard. 2. # Refer to FCC Part 15.33 (b)(1) conditional testing procedure : Highest frequency generated or used in the device or on which the device operates or tunes (MHz) Upper frequency of measurement range (MHz) Below 1.705 30 1.705-108 1000 108-500 2000 500-1000 5000 Above 1000 5th harmonic of the highest frequency or 40 GHz, whichever is lower. Measurement Uncertainty Test Item Frequency Range Measurement Uncertainty Notes Radiated Emission 30MHz-200MHz 3.8039dB (1) Radiated Emission 200MHz-1GHz 3.9679dB (1) Radiated Emission 1GHz-18GHz 4.29dB (1) AC Power Line Conducted Emission 0.15MHz ~ 30MHz 3.44dB (1) Note (1): The measurement uncertainty is for coverage factor of k=2 and a level of confidence of 95%. Report No.: GTSL2023090117F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, L…

Text truncated - open the document above for the full version.

Page 1 of 1 Radiated Emission Conducted Emission