2AUHGOUT-STWStark

Made in China Residential use only Fabriqué en Chine Usage résidentiel seulement Hecho en China Uso residential solamente Rev. 14.04.2023 Smart wall mounted LED light fixture - Stark TM INSTRUCTION MANUAL IMPORTANT, KEEP FOR FUTURE REFERENCE: PLEASE READ CAREFULLY. Luminaire intelligent mural à DEL - Stark MC MANUEL D’INSTRUCTIONS IMPORTANT, CONSERVER POUR CONSULTATION ULTÉRIEURE : LIRE ATTENTIVEMENT. Luminaria inteligente de pared LED - Stark MR MANUAL DE INSTRUCCIONES IMPORTANTE, CONSERVAR PARA FUTURA REFERENCIA : LEER DETENIDAMENTE. Model / Modèle / Modelo: OUT-STW-C 2 INSTRUCTION MANUAL / MANUEL D’INSTRUCTIONS / MANUAL DE INSTRUCCIONES EN INCLUDED FR INCLUS ES INCLUIDO WHAT YOU WILL NEED...VOUS AUREZ BESOIN DE...LO QUE NECESITARÁ... Item Pièce Pieza Description Description Descripción Quantity Quantité Cantidad Wire connector Capuchon de connexion Conector de cable x 3 +1 extra Mounting Screw Vis de support de montage Tornillo de soporte de montaje x 2 Mounting bracket Support de montage Soporte de montaje X 1 Fixation nut Écrou de fixation Tuerca de fijación x 2 +1 extra Washer Rondelle Arandella x 2 +1 extra Light fixture Luminaire Luminario x 1 Screwdriver Tournevis Destornillador Sealant Scellant Sellante NOTE: Please consult your local hardware store for the proper sealant. NOTE : Consulter votre quincaillerie locale afin de vous procurer le bon scellant pour l’installation du luminaire à l’extérieur. NOTE: Por favor, consulte con su ferretería habitual para elegir el sellante correcto para instalar la lámpara fuera. 3 EN IMPORTANT The installer and/or user must read, understand and follow these instructions before installing the product. This product must be properly installed before it is used. If instructions are not followed, the manufacturer will not be held responsible for any problems or product malfunction. Failure to follow installation and/or operating instructions voids the warranty. We recommend that this product be installed by a certified electrician. In some states or provinces, it is a legal requirement for this type of product to be installed by a certified electrician, according to the electrical and building codes effective in the region where the unit is used. FR IMPORTANT Avant l’installation de ce produit, l’utilisateur et/ou l’installateur doit avoir lu et compris ces instructions. Cet appareil doit être installé convenablement avant usage. Si ces instructions ne sont pas respectées, le fabricant ne pourra être tenu responsable d’aucun problème ou de dysfonctionnement du produit. Le non-respect des instructions d’installation et/ou d’utilisation annulera la garantie en vigueur. Nous recommandons que ce produit soit installé par un électricien certifié. Dans certains États ou provinces, il est légalement requis que ce type de produit soit installé par un électricien certifié conformément aux codes de l’électricité et du bâtiment en vigueur. ES IMPORTANTE El instalador o usuario debe leer detenidamente las instrucciones antes de instalar el producto y seguirlas fielmente. El producto debe estar correctamente instalado antes de su utilización. Si no siguen las instrucciones, el fabricante no se hará responsable de problemas o de un funcionamiento incorrecto del producto. Si no sigue las instrucciones de instalación o de uso, se anulará la garantía. Le recomendamos que el producto sea instalado por un electricista certificado. En algunos estados o provincias, se requiere por ley que este tipo de producto sea conectado por un electricista certificado siguiendo los códigos eléctricos y arquitectónicos de la región. Switch off the main electrical supply from the fuse box/circuit breaker before installing the unit or doing any maintenance. Not compatible with dimmers. DIMMABLE WITH APPLICATION ONLY Il est important de couper l’alimentation électrique du disjoncteur avant de procéder à l’installation ou à l’entretien. Non compatible avec les gradateurs. INTENSITÉ VARIABLE AVEC APPLICATION SEULEMENT Desconecte la instalación eléctrica en la caja de circuitos/disyuntor antes de instalar esta unidad o realizar tareas de mantenimiento en ella. No es compatible con atenuadores. REGULABLE SOLO CON APLICACIÓN WARNING: Risk of electrical shock. Turn off breaker at the panel. AVERTISSEMENT : Risque de décharge électrique. Éteindre le disjoncteur sur le panneau électrique. ADVERTENCIA: Riesgo de descarga eléctrica. Desconectar la corriente eléctrica del panel (disyuntor). NOTENOTENOTE 4 INSTRUCTION MANUAL / MANUEL D’INSTRUCTIONS / MANUAL DE INSTRUCCIONES STEP-BY-STEP INSTALLATION 1. Turn off the power at the circuit breaker and the light switch. Ensure the power is off before removing the old light fixture. 2. Unscrew and remove the mounting bracket from the light fixture. Install the mounting bracket to the junction box. Ensure that the two mounting screws are pointing away from the wall and are in the horizontal position. 3. Using the junction box screws, screw the mounting bracket onto the junction box. INSTALLATION ÉTAPE PAR ÉTAPE 1. Couper le courant à partir du panneau électrique et du disjoncteur. S’assurer que le courant est bien coupé avant de retirer l’ancien luminaire. 2. Retirer le support de montage du luminaire. Installer le support sur le boîtier de raccordement. Les vis du support de montage doivent pointer à l’opposé du mur et être en position horizontale. 3. Visser le support de montage sur le boîtier de raccordement avec les vis de boîtier de raccordement. INSTALACIÓN ETAPA POR ETAPA 1. Desconecte la instalación eléctrica y apague el interruptor. Antes de retirar la antigua lámpara, asegúrese de que no haya corriente. 2. Desatornille y retire el soporte de montaje de la lámpara. Instale el soporte de montaje en la caja de conexiones. Asegúrese de que los dos tornillos roscados están apuntando en dirección opuesta a la pared en posición horizontal. 3. Usando los tornillos de caja de conexiones, atornille el soporte de montaje en la caja de conexiones. EN MI…

Text truncated - open the document above for the full version.

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: March 20, 2023 Signed by (Printed Name/Title): Nathan Grinager / Co-President *This letter must be dated within 1-year of the date the application is submitted to the TCB for device certification The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Artika For Living Inc. Grantee Code: 2AUHG Contact Name: Mathieu Seguin Street Address: 1756 50 th avenue, City/Province/Zip: Montreal (Lachine)/ Quebec/ Canada/ H8T 2V5 Telephone No: 1-514-883-8699 Email: [email protected] Applicant Signature: Date: 2023-03-20 Signed by (Printed Name/Title): Mathieu Seguin/ Engineering and Quality Control Director

ARTIKAFORLIVINGINC 2023-03-28 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor(FCCID#2AUHGOUT-STW) [ARTIKAFORLIVINGINC](“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Sincerely, Client’ssignature: Client’sname/title:Mathieu.Seguin/Engineering/QCDirector ARTIKAFORLIVINGINC 2023-03-28 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor(FCCID#2AUHGOUT-STW) [ARTIKAFORLIVINGINC](“theapplicant”)certifiesthat,asofthedateofthefilingof theapplication,theapplicantisnotidentifiedontheCoveredListasanentityproducing “covered”equipment. Sincerely, Client’ssignature: Client’sname/title:Mathieu.Seguin/Engineering/QCDirector

DifferencesDeclaration To whomconcern, We companyARTIKAFOR LIVINGINC Here by declares: The seriesmodelOUT-STW-C, OUT-STW-C1,OUT-STW-C2, OUT-STW-C3, OUT-STW-C4, OUT-STW-C5, OUT-STW-C6, OUT-STW-C7, OUT-STW-C8, OUT-STW-C9, OUT-STW-C10, OUT-STW-C11, OUT-STW-C12, OUT-STW-C13, OUT-STW-C14, OUT-STW-C15, OUT-STW-C16, OUT-STW-C17, OUT-STW-C18, OUT-STW-C19, is modelsuse the same circuit principle,the same PCB layout,and the differenceis that they have differentshell colorsand have been testedin STANDARD-TECHTESTING SERVICES. The differencesin seriesmodelsare as follows: OUT-STW-XXXXXX (Remark:“XXXXXX” can be A to Z and/or0 to 9 and or/blank(commerical code).) Client’s signature: Client’s Name :Mathieu.Seguin Company name: ARTIKA FOR LIVING INC Company address: 1756 50th avenue, Lachine, Québec, Canada H8T 2V5 Tel: 1.514.883.8699 E-Mail: [email protected]

ARTIKAFORLIVINGINC 2022.12.30 EurofinsElectricalandElectronicTestingNA,Inc 914WestPatapscoAvenue Baltimore,MD21230 RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeSTANDARD-TECHTESTINGSERVICES/Standard-Tech Building,No.6GuanhongRoad,GuangzhouScienceCity,Guangzhou510663,Chinatoacton ourbehalfinallmattersrelatingtoapplicationforequipmentauthorization,includingthesigning ofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseAct of1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, Client’ssignature: Client’sname/title:Mathieu.Seguin/Engineering/QCDirector Contactinformation/address:175650thavenue,Lachine,Québec,CanadaH8T2V5

ARTIKA FOR LIVING INC 2022.12.30 Eurofins Electrical and Electronic Testing NA, Inc 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Stark /OUT-STW-XXXXXX/ FCC ID: 2AUHGOUT-STW) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Block Diagram/Schematics/ Operation description) required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me i f there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Mathieu.Seguin / Engineering/QC Director Contact information / address: 1756 50th avenue, Lachine, Québec, Canada H8T 2V5

STANDARD-TECHTESTINGSERVICES STANDARD-TECHTESTINGSERVICESAppendixPage 1 of 4 PhotooftheEUT STANDARD-TECHTESTINGSERVICES STANDARD-TECHTESTINGSERVICESAppendixPage 2 of 4 STANDARD-TECHTESTINGSERVICES STANDARD-TECHTESTINGSERVICESAppendixPage 3 of 4 STANDARD-TECHTESTINGSERVICES STANDARD-TECHTESTINGSERVICESAppendixPage 4 of 4

FCCID：2AUHGOUT-STW FCC§15.247(I)&§1.1310&§2.1091-MAXIMUMPERMISSIBLE EXPOSURE(MPE) ApplicableStandard Accordingtosubpart15.247(i)andsubpart1.1310(b)(1),2.1091systemsoperatingundertheprovisions ofthissectionshallbeoperatedinamannerthatensuresthepublicisnotexposedtoRFenergylevelin excessofthecommunicationguidelines. LimitsforGeneralPopulation/UncontrolledExposure FrequencyRange (MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm2) AveragingTime (minutes) 0.3-1.346141.63*(100)30 1.34-30824/f2.19/f*(180/f²)30 30-30027.50.0730.230 300-1500/f/150030 1500-100,000/1.030 f=frequencyinMHz;*=Plane-waveequivalentpowerdensity CalculatedFormulary: PredicationofMPElimitatagivendistance S=PG/4πR²=powerdensity(inappropriateunits,e.g.mW/cm2); P=powerinputtotheantenna(inappropriateunits,e.g.,mW); G=powergainoftheantennainthedirectionofinterestrelativetoanisotropicradiator,thepowergain factor,isnormallynumericgain; R=distancetothecenterofradiationoftheantenna(appropriateunits,e.g.,cm) CalculatedData: Mode Frequency Range (MHz) AntennaGain Tune-up ConductedPower Evaluation Distance (cm) Power Density (mW/cm2) MPE Limit (mW/cm2) (dBi)(numeric)(dBm)(mW) 802.11b 2412~2462 2.41.7412.7818.9720 0.0066 1.0000 802.11g 2.41.7411.6214.52200.00501.0000 802.11n-HT20 2.41.7410.2910.6920 0.0037 1.0000 802.11n-HT402422-2452 2.41.748.757.5020 0.0026 1.0000 Conclusion:TheEUTmeetsexemptionrequirement-RFexposureevaluationgreaterthan20cmdistancespecified in§2.1091.Ifthedevicebuiltintoahostasaportableusage,theadditionalRFexposureevaluationmayberequired asspecifiedby§2.1093.

Specification 1.Parameters: ItemSpecifications Antenna FrequencyRange2405MHz-2480MHz PolarizationLinear PeakGain2.4dBi V.S.W.R ＜2.0 Impedance 50Ω RerurnLoss-10DB Connector PCB （ OnBoard ） Efficiency25%MAX EnvironmentalOperatingTempetature -40 °C -+150 °C 2.Dimension: 3. Manufacturer:NingboShengheLightingCo.,Ltd. Address:No.311PenglaiRoad,EconomicDevelopingZone,Xiangshan,Ningbo, ZhejiangProvince315700,P.R.China ModelNo.:SH-01 4.Gaincurve: 5.Antennapattern: a.Phi02D: b.Phi902D: c.Theta902D:

STANDARD-TECHTESTINGSERVICES STANDARD-TECHTESTINGSERVICESPage 1 of 74 FCCPART15CTESTREPORTFORCERTIFICATION OnBehalfof ARTIKAFORLIVINGINC *************************************** FCCID ： 2AUHGOUT-STW ReportType ： Originalreport ProductType ： Stark TestEngineer:ClintChen ReportNumber:STDNB-221157F-001 ReportDate:2022-12-22 ReviewedBy: PhilipGuo PreparedBy: STANDARD-TECHTESTINGSERVICES Standard-TechBuilding,No.6GuanhongRoad GuangzhouScienceCity,GuangzhouCity,Guangdong Province,Guangzhou510663,People’sRepublicofChina Tel:+86-20-32290320/32290719 Fax:+86-20-32290422/32290556 www.standard-tech.com ThedevicedescribedaboveistestedbySTANDARD-TECHTESTINGSERVICES.toconfirmcomplywithalltheFCCPart15SubpartCrequirements.Thetestresults arecontainedinthistestreportandSTANDARD-TECHTESTINGSERVICESisassumedfullresponsibilityfortheaccuracyandcompletenessofthesetests.Also,this reportshowsthattheEquipmentUnderTest(EUT)istobetechnicallycompliantwiththeFCCrequirements.ThisReportismadeunderFCCPart2.1074.Nomodifications wererequiredduringtestingtobringthisproductintocompliance.Thisreportappliestoabovetestedsampleonly.Thisreportshallnotbereproducedinpartwithout writtenapprovalofSTANDARD-TECHTESTINGSERVICES.Theresultofthisreportisonlyresponsibleforthefeatureandantennasysteminformationin2.2provided byclient. STANDARD-TECHTESTINGSERVICES STANDARD-TECHTESTINGSERVICESPage 2 of 74 TABLEOFCONTENTS DescriptionPage 1.SUMMARYOFSTANDARDSANDRESULTS.................................................................................3 1.1.DescriptionofStandardsandResults.........................................................................................................3 2.GENERALINFORMATION.................................................................................................................4 2.1.DescriptionofEquipmentUnderTest........................................................................................................4 2.2.FeatureofEquipmentUnderTest..............................................................................................................5 2.3.TestedSupportingSystemDetails..............................................................................................................5 2.4.TestInformation.........................................................................................................................................6 2.5.EquipmentsUsedduringtheTest...............................................................................................................6 2.6.TestFacility................................................................................................................................................8 2.7.MeasurementUncertainty(95%confidencelevels,k=2)..........................................................................8 3.POWERLINECONDUCTEDEMISSIONTEST...............................................................................9 3.1.BlockDiagramofTestSetup.....................................................................................................................9 3.2.PowerLineConductedEmissionTestLimits............................................................................................9 3.3.TestProcedure............................................................................................................................................9 3.4.PowerLineConductedEmissionTestResult............................................................................................9 4.RADIATEDEMISSIONTEST............................................................................................................12 4.1.BlockDiagramofTestSetup...................................................................................................................12 4.2.RadiatedEmissionLimit..........................................................................................................................13 4.3.TestProcedure..........................................................................................................................................13 4.4.RadiatedEmissionTestResults...............................................................................................................14 5.CONDUCTEDSPURIOUSEMISSIONS...........................................................................................30 5.1.BlockDiagramofTestSetup...................................................................................................................30 5.2.Limit.........................................................................................................................................................30 5.3.TestProcedure..........................................................................................................................................30 5.4.Testresult.................................................................................................................................................30 6.BANDEDGECOMPLIANCETEST..................................................................................................47 6.1.Limit.........................................................................................................................................................47 6.2.TestProcedure..........................................................................................................................................47 6.3.TestResults..............................................................................................................................................47 7.6dBBandwidthTest..............................................................................................................................56 7.1.BlockDiagramofTestSetup...................................................................................................................56 7.2.Limit.............................................................................................................…

Text truncated - open the document above for the full version.

STANDARD-TECHTESTINGSERVICES STANDARD-TECHTESTINGSERVICESAppendixPage 1 of 2 PhotographofTest 1PhotosofPowerLineConductedEmissionTest STANDARD-TECHTESTINGSERVICES STANDARD-TECHTESTINGSERVICESAppendixPage 2 of 2 2PhotosofRadiatedEmissionTest 30-1000MHz Above1GHz