2AUIUWYZECPANLWyze Indoor Cam Pan

UNITED STATES DESIGNATED AGENT LETTER Date: 04/09/2026 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Wyze Labs, Inc. Company Name: Wyze Labs, Inc. FRN: 0028796076 FRN: 0028796076 Grantee Code: 2AUIU Contact Name: Bruce Li Contact Name: Bruce Li Address: 8815 122nd Ave NE, Ste 201, Kirkland Address: 8815 122nd Ave NE, Ste 201, Kirkland City/Province/Zip: Kirkland, Washington, 98033, United States City/Province/Zip: Kirkland, Washington, 98033, United States Telephone: 8617600403105 Telephone: 886-999-3226 Fax: n/a Fax: n/a Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: 2AUIUWYZECPANL ATTN: Director of Certification: We, < Wyze Labs, Inc. > understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < Wyze Labs, Inc. > acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Name (Printed): Bruce Li Title: Compliance Expert Signature:

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Wyze Labs, Inc. Address 8815 122nd Ave NE, Ste 201, Kirkland, Washington, 98033, United States FRN 0028796076 Grantee Code 2AUIU FCC ID: 2AUIUWYZECPANL Authorized Contact Name Bruce Li Contact Phone 8617600403105 Contact Email [email protected] Wyze Labs, Inc. (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date: 04/09/2026 Print Name: Bruce Li Title: Compliance Expert *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Wyze Labs, Inc. Address 8815 122nd Ave NE, Ste 201, Kirkland, Washington, 98033, United States FRN 0028796076 Grantee Code 2AUIU FCC ID: 2AUIUWYZECPANL Authorized Contact Name Bruce Li Contact Phone 8617600403105 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 04/09/2026 Print Name: Bruce Li Title: Compliance Expert *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Wyze Labs, Inc. Date: 04/09/2026 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AUIUWYZECPANL To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Wyze Labs, Inc. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Bruce Li Title: Compliance Expert Signature: On behalf of Company: Wyze Labs, Inc. Telephone: 8617600403105 E-mail: [email protected]

Wyze Labs, Inc. Date: 04/09/2026 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AUIUWYZECPANL LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Bruce Li Title: Compliance Expert Signature: On behalf of Company: Wyze Labs, Inc. Telephone: 8617600403105 E-mail: [email protected]

Wyze Indoor Cam Pan铭牌贴纸模板 材质：100#白色哑面合成纸 尺寸：42*20.6mm 黑色印刷 ∅ BLE MAC: 80:48:2C:C0:C3:48 WIFI MAC: 80:48:2C:C0:00:6E IC:25466-WYZECPANL FCC ID:2AUIUWYZECPANL INPUT:5V DC,1.5A Designed in Seattle Made in Vietnam M o d e l : W Y Z E C P A N L BLE MAC: 80:48:2C:C0:C3:48 WIFI MAC: 80:48:2C:C0:00:6E IC:25466-WYZECPANL FCC ID:2AUIUWYZECPANL INPUT:5V DC,1.5A Designed in Seattle Made in Vietnam M o d e l : W Y Z E C P A N L W y z e I n d o o r C a m P a n W y z e I n d o o r C a m P a n BLE MAC/WIFI MAC/产地根据实际填写 5pt-Arial-Bold 3.5pt-Arial-Regular 3.5pt-Arial-Regular 4pt-Arial-Regular 4.5pt-Arial-Bold 7*7mm

Page 1 of 1

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100009504 Page: 1 of 12 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2601000095AT Applicant: Wyze Labs, Inc. Address of Applicant: 8815 122nd Ave NE, Ste 201, Kirkland Washington 98033, United States Manufacturer: Wyze Labs, Inc. Address of Manufacturer: 8815 122nd Ave NE, Ste 201, Kirkland Washington 98033, United States Equipment Under Test (EUT): EUT Name: Wyze Indoor Cam Pan Model No.: WYZECPANL Trade Mark: WYZE FCC ID: 2AUIUWYZECPANL Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2026-01-07 Date of Evaluation: 2026-01-23 to 2026-03-25 Date of Issue: 2026-04-05 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100009504 Page: 2 of 12 Revision Record Version Chapter Date Modifier Remark 01 2026-04-05 Original Authorized for issue by: Tree Zhan/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100009504 Page: 3 of 12 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 5 3.4 Test Location ...................................................................................................................................... 5 3.5 Test Facility ........................................................................................................................................ 5 3.6 Deviation from Standards ................................................................................................................... 5 3.7 Abnormalities from Standard Conditions ........................................................................................... 5 4 FCC Radiofrequency radiation exposure limits .................................................................................... 6 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 6 4.2 MPE-based Exemption ...................................................................................................................... 6 4.3 SAR-based Exemption ....................................................................................................................... 7 4.4 RF Exposure Test Exemptions for Simultaneous Transmission ........................................................ 9 5 Measurement and Calculation ............................................................................................................... 10 5.1 Maximum transmit power ................................................................................................................. 10 5.2 RF Exposure Calculation ................................................................................................................. 11 6 EUT Constructional Details (EUT Photos) ........................................................................................... 12 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100009504 Page: 4 of 12 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: Powered by adapter. MODEL: GQ06A-050150-ZUU INPUT: 100-240V~50/60Hz 0.3A OUTPUT: 5V/1.5A For BLE: Cable Loss (for RF conducted test): 0.7dB Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: FPC Antenna Antenna Gain: SY Antenna: 2.4 dBi YD Antenna: 2.48 dBi For 2.4G WIFI: Operation Frequency: 802.11b/g/n(HT20)/ax(HEW20)/: 2412MHz to 2462MHz;802.11n(HT40)/ax(HEW40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (DBPSK, DQPSK, CCK); 802.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM); 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024-QAM) Number of Channels: 802.11b/g/n(HT20)/ax(HEW20):11;802.11n(HT40)/ax(HEW40):7 Channel Spacing: 5MHz Antenna Type: FPC Antenna Antenna Gain: SY Antenna: 2.4 dBi YD Antenna: 2.48 dBi Remark:The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100009504 Page: 5 of 12 3.3 Separation Distance Minimum test separation distance: 20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nans…

Text truncated - open the document above for the full version.

ProductDatasheet -1- SUNNYWAYTECHNOLOGY(CHINA) ANTENNASPEC Customername：ShenzhenJiweiTimesTechnology Co.,Ltd Entryname：WyzePanlite Workingband: WIFI2.4G SunnywayMaterialspecification SpecificationtypeSunnywaynumberCustomernumber WIFIANTENNA SZ25192IB77 3.014.001.0015 Revisionhistory Dateof preparation/change ChangecontentAltered person Edition 2026.04.23NewissueKunxiongXiaoA SunnywayCountersigncolumn R&D ME：Toexamine： QE：Approval： RF：Toexamine： Customerwillsignthecolumn ElectronicEngineerProjectmanagerStructuralEngineerQualityEngineer SunnywayTechnology(CHINA) Add:1F,Building4,No.215-99,GaoGuangRoad,QingPuDistrict,Shanghai,China Tel:+86-021-60835368Fax:+86-021-64842328 Email:[email protected]:www.sunnyway-iot.com ProductDatasheet -2- Directory ANTENNASPEC ........................................................................................................................1 1.Projectinformation.........................................................................................................3 1.1Mockuppicture.......................................................................................................3 1.2Antennaproductpicture.....................................................................................3 2.Matchingcircuit...............................................................................................................3 3.Antennapassivetestingdata......................................................................................4 3.1S11Descriptionofthetestmethod....................................................................4 3.2S11Testparameters.............................................................................................5 3.3Antennagain...........................................................................................................5 3.4Radiationpattern....................................................................................................5 4.Antennaactivetestingdata.........................................................................................6 4.1Testtheenvironment..............................................................................................6 4.2OTAActivetestdata...............................................................................................6 5.Environmentaltreatmentmethods............................................................................7 6.Engineeringdrawings....................................................................................................8 Product Datasheet -3- 1. Project information 1.1 Mockup picture 1.2 Antenna product picture 2. Antenna passive testing data 3.1 S11 Descriptionof the test method Test the equipment：Vector network analyzer (Agilent E5071C) Test methodology：Use a 50 ohm CABLE cable to export from the instrumenttest port, use the calibration piece to calibrateand connect the SMA connectorof the test fixture, and record the return loss and standing wave ratio correspondingto the relevant frequencypoint. Below is aschematicpicture of the test ： ProductDatasheet -4- Testschematicdiagram 2.2S11Testparameters ProductDatasheet -5- 2.3Antennagain 2.4Radiationpattern ProductDatasheet -6- 3.Antennaactivetestingdata 4.1Testtheenvironment Testthesystem：Multi-probeOTAmeasurementsystem（XH-IoT） Testtheenvironment：Temperature22°C±3°C,humidity50%±15% Testtheequipment：Whentestingpassivedata,usethenetworkanalyzerR&SZND/AgilentE5071C Whentestingactivedata,usetheAgilent8960/CMW500/SP9500E/SP8315 ProductDatasheet -7- 4.2OTAActivetestdata ProductDatasheet -8- 4.Engineeringdrawings

Shenzhen World Elite Electronic Co. LTD. Sample Approval Sheet Product Information ： Customer Shenzhen Gwelltimes Technology Co.,Ltd. Material Description PAN LITE Antenna Customer’s Part number Specifications FPC（47*12.43mm）+Black Coaxial Cable（φ 0.81*35mm）+MHF II+Welding Supplier’s Part number 136-PANLT-10A Date 2025-11-20 Supplier ： Prepared ByChecked ByApproved By Zhang DengqiaoLi YuepengZhang Xiangting Customer Approval ： Accepted ByChecked ByApproved By Results ： □Full Approval □Conditional Approval □Unqualified □Others: Shenzhen World Elite Electronic Co. LTD. Add:Xiangyuer Industrial Park, No. 8, Longsheng Road, Longgang Street, Longgang District, Shenzhen, Guangdong, China Tel:86-755-89983786 Page 2 Contents 1、Specification...................................................................... 3 1.1 Electrical specification standard......................................................3 1.1.1 Electrical Specifications..........................................................................3 1.1.2 Antenna Matching Network......................................................................3 2、Test...........................................................................................3 2.1 Test of passive S11........................................................................3 2.1.1 Test connection......................................................................................3 2.1.2 Passive S11............................................................................................4 2.2 Gain and efficiency test.................................................................4 2.2.1 Test Position..........................................................................................4 2.2.2 Test equipment.......................................................................................4 2.2.3 Results Summary....................................................................................5 2.2.4 Radiation Pattern Results.........................................................................5 2.3 OTA test....................................................................................6 2.3.1 Results Summary....................................................................................6 2.3.2 Test photo.............................................................................................7 3、Conclusion...................................................................................8 4、Part Drawing.......................................................................9 Page 3 1 、 Specification This report mainly provides the testing status of various electrical and structural performance parameters of PAN LITE Antenna. Figure 1Antenna 1.1 Electrical specification standard 1.1.1 Electrical Specifications The antenna operates in the 2400-2480MHz . The following table is the electrical performance index of the antenna designed by our company. 1.1.2 Antenna Matching Network 2、Test The antenna was debugged and tested with the prototype provided by the customer. 2.1 Test of passive S11 2.1.1 Test connection The passive S11 test device is connected as follows: Network Analyzer→Test Line→Test Fixture. AntennaPAN LITE Antenna Frequency Range2400-2480MHz VSWR<2 Efficiency>50% Impedance50 ohm PolarizationLinear polarization ElementValue E1(0402)N/A E2(0402)0R E3(0402)N/A Page 4 2.1.2Passive S11 The following table shows the standing wave ratio values of the edge frequency points of the antenna operating frequency band.The waveform of Return Loss and VSWR obtained by the test is shown as follows. Frequency(MHz)240024402480 VSWR1.431.111.44 Return Loss-14.99-25.18-14.74 2.2 Gain and efficiency test 2.2.1Test Position Microwave anechoic chamber, the test frequency range is 400MHz-6GHz. 2.2.2Test equipment Network analyzer, standard horn antenna, multi-probe near field antenna test system, test computer, etc Page 5 2.2.3 Results Summary In the microwave anechoic chamber, the measured values related to efficiency and gain are shown in the table below. Frequency(MHz)Gain(dBi)Efficency(%) 24002.2855.10% 24102.4458.80% 24202.4858.80% 24302.4757.40% 24402.4455.90% 24502.4754.80% 24602.4454.00% 24702.4555.10% 24802.2854.60% 24902.4457.30% 25002.4757.00% 2.2.4 Radiation Pattern Results Page 6 2.3 OTA test 2.3.1 Results Summary 1#2#3# WIFI b 11M Channel TRP(dBm) TIS(dBm) TRP(dBm) TIS(dBm) TRP(dBm) TIS(dBm) 118.91-87.7718.35-88.2918.63-88.41 617.99-87.4217.41-88.1517.16-87.43 1117.85-87.5917.51-88.217.11-87.99 WIFI g 54M Channel TRP(dBm) TIS(dBm) TRP(dBm) TIS(dBm) TRP(dBm) TIS(dBm) 116.67-74.4715.78-74.7316.36-74.61 615.83-73.9915.32-74.9814.99-74.28 1115.76-74.6215.41-75.6415.02-75.4 WIFI n MCS7 Channel TRP(dBm) TIS(dBm) TRP(dBm) TIS(dBm) TRP(dBm) TIS(dBm) 116.77-72.3216.15-73.0116.51-73.45 615.79-71.5515.52-73.7915.24-72.69 1116-72.4115.81-73.8615.22-73.55 WIFI ax MCS7 Channel TRP(dBm) TIS(dBm) TRP(dBm) TIS(dBm) TRP(dBm) TIS(dBm) 119.96-72.7819.54-73.2819.68-73.18 618.73-72.4618.52-73.2518.05-72.86 1118.81-72.5818.58-73.7618.23-73.02 WIFI ax MCS11 Channel TRP(dBm) TIS(dBm) TRP(dBm) TIS(dBm) TRP(dBm) TIS(dBm) 119.89-61.619.35-61.8219.57-61.41 618.95-61.2918.32-61.7118.11-61.53 1119.22-61.1918.45-61.8318.22-61.32 Page 7 2.3.2 Test photo Page 8 3 、 Conclusion This antenna is designed on the basis of the prototype provided by the customer. The above electrical performance parameters are tested under the environmental treatment conditions of the test prototype. The electrical parameters and structural performance have met the technical requirements. Please confirm! Page 9 4、Part Drawing

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100009502 Page: 1 of 84 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2601000095AT Applicant: Wyze Labs, Inc. Address of Applicant: 8815 122nd Ave NE, Ste 201, Kirkland Washington 98033, United States Manufacturer: Wyze Labs, Inc. Address of Manufacturer: 8815 122nd Ave NE, Ste 201, Kirkland Washington 98033, United States Equipment Under Test (EUT): EUT Name: Wyze Indoor Cam Pan Model No.: WYZECPANL Trade Mark: WYZE FCC ID: 2AUIUWYZECPANL Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-01-07 Date of Test: 2026-01-23 to 2026-03-25 Date of Issue: 2026-04-05 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100009502 Page: 2 of 84 Revision Record Version Chapter Date Modifier Remark 01 2026-04-05 Original Authorized for issue by: Tree Zhan/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100009502 Page: 3 of 84 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2020) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Conducted Peak Output Power ANSI C63.10 (2020) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2020) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass This product and adapter come in different color options. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100009502 Page: 4 of 84 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 6 4.4 Test Location ...................................................................................................................................... 7 4.5 Test Facility ........................................................................................................................................ 7 4.6 Deviation from Standards ................................................................................................................... 7 4.7 Abnormalities from Standard Conditions ........................................................................................... 7 5 Equipment List .......................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ............................................................................................. 10 6.1 Antenna Requirement ...................................................................................................................... 10 6.1.1 Test Requirement: ....................................................................................................................... 10 6.1.2 Conclusion .........…

Text truncated - open the document above for the full version.